Setup Tables Problem

Hi All,
I have a typical problem in filling up the setup table. I want to fill up the setup table with sales orders(Appl. 11) created after 2006. I sorted out all the sales orders created after 2006 from VBAK table and gave the range in the selection screen while filling the setup table. When I ran RSA3 to check the number of records, it gives much much more records than it is available in VBAK table and also some sales orders are extracted which are created before 2006.
Can any body help on this.
Thanks in adavance
Tapan T

Hi All,
There is a confusion here. I am not talking of ERDAT as a selection parameter in RSA3( Rather in Infopackage)to test.
I want to restrict the Setup table with sales orders being cretaed in or after 2006. Why should I fillup old sales orders(before 2006)in setup table.
While I do perform setup for application 13, the following fields are coming as a part of selection criteria.
1) Archiving session
2)Sales Organization
3)Company code
4)Sales document
How can I restrict the setup table with only 2006 sales orders and avoid unwanted sales order(before 2006).
Is that poss ?? If yes Please let me know.
Regards,
Tapan

Similar Messages

  • Setup table problem

    hello friends,
    i am trying to fill the setup tables for some sales document range , and when am running the statiscul update for this document . It is completing in 2 minutes , as there are no document ..but still it doesn#t show any records when i check the datasource in >RSA3 .
    I have checked the setup table also , but there is no entry .
    MC12VC0HDRSETUP                BW Reorganization Store for MC12VC0HDR 
    MC12VC0ITMSETUP                BW Reorganization Store for MC12VC0ITM 
    MC12VC0SCLSETUP                BW Reorganization Store for MC12VC0SCL 
    Any idea ?

    yes  temination date i have given as 31,12,9999
    and yes data is available for those documents .
    below is the job log -
    Job started
    Step 001 started (program RMCVNEUL,
    Start of delivery note processing
    Job finished
    Please help me .
    Regards

  • Extraction Problem- while filling the setup table

    Hi all,
    I have a problem when i  fill the setup table for LO cockpit Extraction on any SD datasources (2_LIS_VAHDR,2lis_13_vdkon etc.,). i am done with LBWQ successfully. i also verified the datasources in RSA6. They are in active status in RSA7-delta queue.
    After i submit the request to fill the setup table, i am getting
    "datasource 2_LIS_VAHDR contains data still to be transferred". if i check the extract checker (RSA3) i am getting the error msg "data source is not defined in the source system"
    Can anybody help me on this?
    one of my friend suggested that it could be the reason that some jobs are in active status that loads/updates data into base tables which the datasources refers.
    Any idea on the reason and resolutions?
    Greatly appreciated !

    Hi Vijaya,
    We too got the same Error : " the datasources are not defined in the source system".
    This is source system connection problem.  Check whether connection between R/3 and BW is active.
    This error occurs when the connection is inactive.
    Also, if it is copy client, then check data exists in other client. If so delete the setup tables data in that client as well.
    This will resolve your issue.
    Thanks
    Edited by: Allen Fyne on Aug 9, 2008 6:47 PM

  • Problem while filling the setup table

    Hi experts,
    i am extracting data from 2lis_12_vcitm, while filling the setup table it showing bellow error message,
    NO EXTRACT STRUCTURE ACTIVATE OR NO BW CONNECTED
    but i Extract structure is in active mode and BW connection also is there.
    what is the problem,
    please help me,
    answer will be appreciated with full points,
    regards,
    venkat

    Hi Venkata,
    If u are looking for reinitialization to ur targets and which needs the refilling of setup tables then u need to perform the following activities.
    Try to take the down time in R3 to stop the posting.
    try to empty the queue(both the extraction and Delta queue in R3 and deeavtivate the V3 update) and then delte the data in ur targets in BW which are getting feeded from these Data sources and remove the init flag at the Infopackage level for the respective DS's.
    And then check if there is any blocked records in SM13 for ur application.
    Delete the existing set up for the application 12.
    And then refill the setup tables (may be u can think of multiple setups to make this execution faster and to reduce the R3 load).
    Once the setup is done.. then take init-without data transfer for ur DS's in BW and then activate the V3 in R3.Down time can be taken off here.
    and then take repair full load(which carry all of ur Setup tables data to ur targets). Once the repair is done then u can look for the regular deltas...
    For more information u can search SDN on the same..
    thanks
    Assign points if this helps

  • Problem with populating setup tables for purchasing

    I'm working on NW2004s.
    Problem: Setup tables are not getting populated for 2lis_02_hdr, 2lis_02_item..
    what all i've done so far:
    1. Activated Data Sources in RSA5.
    2. In LO Data Extraction, all the extract structure are active. (btw in job control i'm not sure what it does, i did make job parameter start date immediate, didnt set the print parms, schedule job gives an error.. anything here i may be messing it up?)
    3. In SBIW initialization Deleted the contents of setup table and executed the 'Purchasing - perform setup'.
    4. In NPRT i can see the log, the name of the source table EKKO, duration of run is 0.0 and no of docs 130.
    5. In RSA3 for 2lis_02_hdr extraction process 0 records.
    6. I look at SE11 for 'MC02M_0HDRSETUP' and table contents gives 0 records.
    Any help is appreciated what i'm missing why the setup tables are not populating. I went thru the forum and did what was said but no sucess yet. I'm not an expert in SAP BW just been working for a year so pl dont be cryptic, explain u'r answers. Thanks for your time
    Mayil

    Hi,
    All the active datasources will be available in RSA6, after that go to LBWE ,maintain Ex Stru, Maintain DS and make that active, then we go for statistical setup
    have you done these things?
    Did you put any filters while filling up the setup tables?
    what is the transaction you used for Setup.
    cheers
    RK

  • Problem with setup table fillup

    Hi,
    I wish to extract data using the business content Data source 2LIS_02_HDR( Purchasing). I have activated the extract structure and all other necessary steps. I have deleted the setup table. When I fillup the set up table I get the error " No Extraction structure is active or no BW is connected". I checked with basis guy regarding the connectivity which is absolutely fine. Please let me know in case you have faced this kind of problem before.
    Thanks in advance,
    Tapan

    hi,
    oss note 914268-No extraction structure active or no BW connected
    Symptom
    Within an instance, you use the NetWeaver components of SAP ERP and BW.
    When you execute transactions like to fill rebuild tables in Logistics, the system issues the termination message M2 630:
    No extraction structure active or no BW connected
    The connection test and the settings for the Myself source system are definitely correctly maintained.
    Other terms
    OLTP, extractor, data extraction, DataSource, API service, SAPI, RSA2_SERV_BW_CONNECTED, OLI1BW, OLIZBW, OLI3BW, OLI9BW, 2LIS_XX_XXX, M2630, SBIW, LIS, rebuild
    Reason and Prerequisites
    The problem is caused by a program error.
    Prerequisites:
    Within an instance, you are using the NetWeaver components of SAP ERP and BW. Thus, potential data loading processes are executed by using the Myself source system connection.
    No other BW system is connected for data as a target system.
    Cause:
    Prior to NetWeaver, you could not operate ERP and BW in one common system. For this reason, the case that Logistics data need to be loaded into the same system for BW functions was not considered. The system as "source system" does not recognize that the system is connected as a "BW system".
    Solution
    To correct the problem, you need Service API 7.00 Support Package 08 or PI 2004.1 4.6C Support Package 13 in the affected source system. The attached composite SAP note informs you on which software components contain Service API 7.0 and lists the corresponding Support Packages of these components.
    Alternatively, implement the attached program corrections.
    In the BW system, you only need to implement the correction if the BW system is affected in its role as a source system for itselt (myself connection) or for another BW system.
    Caution: Service API is an internal component. Therfore, it is not delivered separately but as a part of other software components: PI, CRM, PI_BASIS and several others. Thus, a composite SAP note is created for each SAPI correction note. This composite note describes which Support Packages of the above mentioned software components contain the SAPI correction. However, the composite SAP note will only be released when the corresponding SAPI Support Packages are released.

  • Problems with filling of Setup table for 2LIS_03_UM

    I am not able to fill up this table. I mean its not getting filled thorugh TCode OLIZBW.
    Setup table for 2LIS_03_BF is getting filled up though.
    Can anyone foresee what can be the reason.
    Thanks PB

    Nope I am not. But the problem I have posted in my last note that i was getting -ve stock values which was resolved when i loaded the data with infosource 2LIS_03_UM in development. when I am testing it in QA I am not getting dat in this extractor.
    I had a chat with MM Functional Consultant , he said I probably wont get this data.
    Now I am not sure how will I be able to resolve the problem.
    Regards
    PB

  • Problem while filling the Setup Table for the DS 2LIS_02_SCL.

    Hi All,
    When I am trying to fill the Setup table for the DataSource 2LIS_02_SCL and only for one specific Purchase Order, it is showing me a message like
    u201CDataSource 2LIS_02_ITM contains data still to be transferredu201D
    I have deleted the Setup Table and I want to delete the entries from SM13, but I do not have Authorization.
    Also, here I am trying to fill the Setup Table for 2LIS_02_SCL and not for 2LIS_02_ITM, but the message displayed above is showing as 2LIS_02_ITM DataSource. I think the Setup Table will be same for both the DataSources.
    Waiting for your valuable inputs.
    Thanks in Advance.

    Hi,
    When you want to fill the setup tables first you need to delete setup tables to avoid the duplicate entires in setup tables ( you can delete the setup tables by using t.code LBWG with application no is 02)
    In your case, the data souce is 2LIS_02_SCL for purchasing.
    when you want to delete the setup tables by using t.code LBWG with 02 application no it will delete all the purchasing related data from all the data sources like
    2LIS_02_SCL
    2LIS_02_ITM
    Before the deletion of setup tables you need to clear the delta Queues and stop the V3 jobs, which loads the data to Delta Queues (RSA7) and Update tables(LBWQ).
    you need to run the V3  jobs manually by using LBWE > Job control > and schedule the jobs until the delta queues will get 0 records. that means no data will be available in RSA7 and LBWQ
    go to SM37 to see the jobs LIS-BW-VB_APPLICATION_02,
    once the delta queues gets 0 records by running V3 Jobs manullay.
    Then remove the released state jobs > remove from schedule means delete the jobs in LBWE > Go to job control > you can delete the released jobs.
    Becuase No postings to be done in application tables, while running setuptable filling you should take some down time to fill the setup tables.( OLI*BW)  *=Application number.
    Once you clear the Queues and delete the v3 jobs, then you need to fill the setup tables after deletion of setup tables.
    once you fill the setup tables , by running intialization to BW side the delta Queue is formed for the data source in R3 side
    Now the postings can be done in R3 side, so you need schedule back the V3 jobs, which you already delted from LBWE to load the data from application tables to RSA7 or LBWQ.
    I hope this may help yoou.
    Regards.
    Rambabu
    Edited by: Rambabu velanati on Jun 9, 2010 4:41 PM
    Edited by: Rambabu velanati on Jun 9, 2010 4:52 PM

  • Problems filling material movements setup table

    I am trying to fill the statistical setup table for material movements (OLI1BW).
    I have given a name and entered posting dates 01.01.1998 to 31.12.2002 and have put the date of termination in the future.  However, the run does not start whether I execute in the foreground or background.  I have checked NPRT log and 0 records with 0 time.  Does anyone know why this could be? Thanks
    It is okay I had put the posting date in the material doc field
    Message was edited by: Niten Shah

    nitesh,
    what you did?how can you put posting date in material doc field?
    You have to put it in 'selection by posting date' field
    or you can give material doc range in 'selection by material doc' field
    Thanks
    Teja

  • Problem in filling up the setup tables for 2LIS_11_VAHDR (All SD Data sources)

    Hello All,
    I have been  trying to fillup the setup tables for SD datasources( Application-11 Ex:2LIS_11_VAHDR), but it was not allowing me to do that.
    Below are the steps i have followed,
    1.Deleted the setup tables using tcode-LBWG- Application-11
    2.Cleared the queues in RSA7 and found 0 queues for 2LIS_11_VAHDR D.S by triggereing the I.P till it get zeroes.
    3.Checked the data in RSA3-No data found.
    4.Filling the setup tables using OLI7BW t-code, got a popu(Data for 2LIS_11_VAHDR has to still transfered)
    Do i need clear all the queues for SD-Billings,Orders e.t.c  since i have 8 data sources to be cleared apart from 2LIS_11_VAHDR .
    Could you please suggest any other option to fillup the setup tables.
    Regards,
    Siva

    Did you run the infopackage twice pertaining to 2lis_11_vahdr.One for delta and another time for repeat delta.As delta queue will hold the records in repeat delta mode as well.
    Also in case of Direct Delta --Data is transferred to Base tables and delta queue (RSA7) at the same time.So extraction queue (LBWG )and update tables(SM13) does not come into the picture.
    Regards,
    AL

  • Error while filling setup table

    Hello all
    I am trying to fill a setup table for 2lis_11_vahdr DS. I deleted setup table firts using LBWG and then proceeded the setup process by using OLI7BW , while i did that i got an error message "Error determing rate:foreign curr.DEM local curr.EUR date 02.01.1997(doc 4969)"
    could anyone tell me what this error is referring to ?
    thanks

    Hi DK.............
    I also think this is a problem of Exchange rate only..............maintain the exchange rate in SPRO >> General Settings >> Enter Exchange Rates.(Tcode : OB08 )
    Exchange rate table is TCURR.
    Exchange rates are maintained in r/3 and transfer to bw.................rsa1>>source system>>r/3 source system>>right click Transfer...........
    Regards,
    Debjani...........

  • Error while uploading setup table

    Hi experts,
       while loading the setup table for PO , I am getting the below error.
        "No extraction structure active or no BW connected"
       what could be the problem and how to rectify this but the stucture is active in LBWE
    Thanks in advance
    sai

    Hi,
      this issue can be resolved in two ways.
    1. Check ur RFC connections in both BW system n R/3 System.Goto sm59 in both r/3 n in bw..select the logical system(i.e..ur source system) test the connection...if the connection is ok..then goto RSA5,activate the data source and do the same in LBWE as well..
    2. if the connection is not ok..check ur logical sys..in Transaction SALE...there is a possible of changing ur logica ystem too...kindly check it out..
    hope this helps..
    thanks...

  • Error while filling setup tables

    Hi All,
    By mistake my Delta queue for SD Deliveries (2LIS_12_). NOw as a solution we are filling in the setup tables again.
    But the request for filling up the tables cancelled giving the error "Document number does not exist".
    I donot know, how to solve this? Plz help me ,....Its really really urgent.
    Thanx in advance.

    Hi Preet,
    Go through this links:
    Re: problem when initializing setup tables for lo update
    "No extraction structure active or no BW connected"
    LO: No extraction structure active or no BW connected
    Thanks,
    Ajay

  • Error while filling setup table for Sales

    Dear Team,
    We are getting following error while filling setup table for Sales (application component 11) and for Billing (application component 13),
    application component 11
    Error determining rate: foreign curr.  local curr. INR date 08.10.2007 (doc. 673624) (JOB - RMCVNEUA)
    Message No M2810
    application component 13
    Billing document 480050000: error determining stats. currency rate (no updating)
    More faulty documents found than the tolerated 0000000000 (JOB - RMCVNEUF)
    I have seen lot of threads based on this but all r showing diffrenent currency to INR but for the above mentioned documents currency is in INR only so why it is showing the error I am not able to determine.
    If anybody faced this problem kindly reply to this.
    Best Regards,
    SG

    Hi There,
    Might be your using a wrong document number.
    I mean if your using the 11 you should use only Sales document number and for 13 you should only use billing document number.
    If you use vice versa that error will throw.
    Regards,
    MQ

  • Error while filling setup table for 2LIS_03_BF

    Hello,
    I am getting an error while filling set-up table for 2LIS_03_BF.
    Following is the screenshot of the same.
    If I check in ST22, I get following,
    I could fill the setup table for other datasource 2LIS_03_BX without any problem.
    Please suggest.

    Hi,
    Can you try filling the setup table data for that range in background?
    Sometimes because of huge data that you are trying to fill it might through you a dump. So please execute it in background and see if it works?.
    But still can't really say what that dump tells from what you attached.
    Thanks,
    Sathya

Maybe you are looking for

  • Workitem not sent to agent

    Hi all, I have this problem A workitem was not sent to the agent. When i check the workflow's log, the workitem has no agent, it is in blank !!! What could have happened ? Why if the workflow was working fine, suddenly the agent was set to blank ? Wh

  • Problem while Connecting with oracle thin driver

    I have been trying for the past two days for connecting oracle 8.1.1.6 using thin driver. I set the classpath also. It throws me the following exception. Exception in thread "main" java.sql.SQLException: Io exception: The Network Adap ter could not e

  • Show Data TIps

    I try to show DataTips(only marker) in Line Chart (AreaChart) in all time. screen

  • How do I create a mail merge envelope ?

    I am not able to create a mail merge envelope. Can someone walk me through the steps? Message was edited by: Guam Chef

  • Problems saving survey values

    Hello, I have problems with surveys. I want modify the values of a survey from a customer program. If the survey has been saved on-line before from the corresponding transaction, I have no problem. But If it hasn't been saved, I can't do the changes.