Setup TMS

Hi,
I just have DEV instance ready without TMS configured, but QAS server not ready. My developers will be using DEV soon, in order for their TR (transport request) to be transportable when QAS is ready, i need to setup a virtual QAS.
is there any guide on how to configure TMS and create virtual QAS ?
thanks.
regards,
kent

Hi,
you can create virtual systems for the domain controller.
first logon to the domain controller that is your dev box and use single system configuration and create one virtual system for that
First logon to the domain controller in 000 cleint and with DDIC user.
SAP System-> Create ->Virtual system.
and use the QAS box system id for the virtual system
and finally distribute and activate
Regards,
srini

Similar Messages

Do I need to setup TMS for SolMan?

Hi,
I am new to SolMan. I need to setup in order to use Maintenance Optimizer.
Does SolMan need to have TMS configured like other SAP solutions, Dev, QA and Prod? Or there is only one Solman setup and it does everything we need?
Thank you.

Usually there will be only one Solution manager in the landscape . You mainly use this for central monitoring, Maintenance Optimizer , creating Keys, Service Desk , proj documentation etc and you are not doing any development work in here. So it does not make sense to have Dev, QA and PRD for solution manager. But you can have a sandbox which will help you to test the Support packs before applying directly in production. Maintenance Optimizer can be configured with Solution manager .
Thanks
Prince Jose

Adding Polycom HDX8000 to TMS with security mode

I have been adding Polycom HDX8000 to Cisco TMS but doing so i had to disable security mode on HDX8000 which enables SNMP (SNMP needs to be enabled on HDX8000 to get identified during adding process in TMS)
I am able to add HDX8000 to TMS but in doing so the HDX is now being accessed using http since security mode is disabled.As per the security norms all HDX's needs to have secured web access (https), if i enable security mode on HDX then SNMP is disabled resulting in TMS loosing control over HDX (error on TMS:"no snmp response")
Basically i want to enable SNMP at the same time have https only access to HDX8000
Has anybody else encountered the above mentioned situation ?
TMS 14.4.0
hdx8000- 2.5.1 - 3.1.6

In order for TMS to control the Polycom HDX, you'll need to disable Secure Mode. How to setup TMS and the HDX to work together, see the TMS Product Support Guide, it's outdated being it was for TMS 13.x, but it's still valid when it refers to the HDX and what needs to be configured. It mentions about disabling Secure Mode, and using a security profile of medium or below. Just from looking at the Polycom HDX Admin Guide, on pg 311 at the medium security profile details, it looks like you could tweak the security profile when secure mode is disabled and maybe change the web port to 443 instead of 80, though this is just a guess and untested.

How to log in to the new installed SAP ABAP instance ?

Dear Experts,
In SAP ERP 2005 installation,
I have done central system installation, Now I need to perform postinstallation steps,
Could you please tell me, how to log in to the new installed SAP ABAP instance and do the post installation?
Regards,
Madhavan K

Hi,
Check the list of post installation steps:
http://www.saptechies.com/post-installation-steps-for-ecc-60/
From my point of view basic post installation steps are:
- Installing SAP License (from http://service.sap.com/licensekeys)
- Setup TMS (STMS)
- Import profiles (RZ10)
- Client Copy (SCC*)
- Create users (SU01)
However further many steps are required as per your requirements. Cehck the link for more detailed steps.
Regards,
Srikishan

Km transport related problem

Hello guys,
I have done the offline transport of km data, and as the SAP documentation says only ACL's get transported. The problem is the we are not getting the collaboration tab in folder or document details property.
We are only getting View, Actions and Settings.
I guess this problem is due to ACL so i tried giving FULL CONTROL to a user but its not working? Also in the Settings tab it only shows few options like propeties permissions versioning and templates.

I assume that 'virtual' system as QA.
So you have setup TMS using that real DEV and virtual QA. You setup transport route, create a transport and release it.
The time when you release the transport, it is already applied now in DEV. Why it should be there in DEV Import queue then ? It would be shown in that Virtual system's Import queue (second system/QA) but not in dev import queue.
In any case you need not to 'apply/import' that transport 'again' in DEV, when it is already created and released from DEV.
Thanks

Transport Control program tp edded with error code 0247

Hi Guys
I have co setup TMS in a three system landscape, with the PRD server being the transport domain controller. The three systems are running on the HP -UX OS. The import queue of the PRD server remains empty. All the checks on the TMS configurations shows OK.
When i try to add the transport request from Extras > Other Requets> ADD and enter the transport requet no. I receive this message:
Transport Control program tp edded with error code 0247
Errors: add buffer has problem with data- and/or cofile
Can someone assist? I have got some challenges on linux. Are there steps i need to follow or is there something i need to do?
Cheers,
Daniel

Daniel,
Mostly this issue comes when you have some permission problem.
Please check the permission of your /usr/sap/trans/bin and related directories.
It is ideally sidadm.sapsys. Please give 775 to respective directories.
If your Trans directory is mounted, please check if it is properly mounted or not.
If it is not working, please check the log in TMS alert Viewer (Go to STMS Monitor>TMS Alerts>TMS Alert Viewer)
and paste the detailed log here.
Regards,
Sujit.

Transport Related Problem

Hi,
I have a Demo Server. I have configured stms by adding a virtual system. I have created a Transport Request and released it. Now I want it to show in the import queue of my system. So I am adding it manually via transaction stms_import --> Extras --> Other Requests --> Add.
But its giving error :- Transport control program tp ended with error code 0247**
**Errors: addtobuffer has problems with data- and/or cofile
So, I tried to Add it manually from OS via command:-
tp addtobuffer <Req No> <SID> Client=100 pf=/usr/sap/trans/bin/TP_DOMAIN_DV1.PFL
This time it is sucessful and I can see it in the import queue.
I want to know why it is not happening through SAP.
I have tested the following things:-
1. Trans_DIR - Its set in domain.pfl. Path is correct.
2. Tp test - It showing OK
3. Connection Test - Ok
4. Stms is configured. Routes are designed.
Kindly help.
Thanks,
Santanu

I assume that 'virtual' system as QA.
So you have setup TMS using that real DEV and virtual QA. You setup transport route, create a transport and release it.
The time when you release the transport, it is already applied now in DEV. Why it should be there in DEV Import queue then ? It would be shown in that Virtual system's Import queue (second system/QA) but not in dev import queue.
In any case you need not to 'apply/import' that transport 'again' in DEV, when it is already created and released from DEV.
Thanks

Adding Systems to Transport Domain Controller

Hi,
We got copy version of Production system in our test box, I have to configure TMS by deleting production systems , have to include test systems in TMS Systems Overview. What else I have to do to setup TMS in test box? have to update DOMAIN.PFL file ? if any one have step by step procedure with screen shots or any detail oss notes please tell me the links.
Thanks in advance
Regards
Srinivas

Hi F C,
you can delete the TMS configuration
goto>STMS(T-code)>system overview>Extras>Delete TMS Configuration
regards,
kanthi

Problem with TMS setup in HA systems

Dear colleagues,
Our team have installed a new production environmnent to ECC in HA. We have a ASCS in cluster and two dialog instance in each server(local instance).
A virtual host GPPR3CIB and two instances in local, node GPPR301 and node GPPR302. This is an ECC 6.0 on Windows 2003 Server and SQL server 2005.
The architecture is as follows:
- GPPR301 node:
   - Virtual ASCS ASCS_0 (message server)
   - ABAP Primary Instance PPR301_1 (disp+work)
   - ERS (Enqueue replication server) instace ERS_10
- GPPR302 node:
   -ABAP Additional Instance PPR302_2 (disp+work)
   -Virtual Database Instance GPPR3DB
   -ERS (Enqueue replication server) Instance ERS_10
Once the installation is complete you need to apply SAP Note No. 943334 - "TMS setup in high availability systems" to set up high availability STMS. The problem is to distribute the configuration after running
the report " 'TMS_MGR_LOADBALANCING" described in SAP note.
The message indicates problems trying to run the command tp.exe. It has followed the note No. 1010990 and we have checked the folder permissions of the kernel but the problem persists.
Any information or help regarding this type of setup would be welcome.
Thanks.

Hi,
We have solved the problem with STMS. After several tests, the problem was in the parameter SAPLOCALHOSTFULL. This parameter must be assigned the hostname of the local system for each profile instance. If you've assigned the virtual host in the cluster generates the error in the distribution of the STMS.
Regards.

TMS - step-by-step example on how to setup and test TMS

I have installed ECC6 (AS ABAP) on NW2004s on Oracle, Windows platform. This is a 1-system landscape.
I would like to work hands-on with Transport Management System(TMS). I have read the theory part.
I need a document that shows how to setup a test TMS (transport route, package e.t.c.) , create a test transport, export and import the test transport in a 1-system landscape?
I'm looking for a simple test case that will help me understand TMS.
Thanks

Hi,
For single system landscape..
Go 000, DDIC ... STMS--> here it will ask for domain controller -- give self domain ---> Domain controller has been assigned .
Now again goto STMS> System overview>SAP SYSTEM >Create ->Virtual system- give name V<SID>
till this point your domain controller is created and virtual system is created .Next our aim is to setup STMS
again goto STMS>transport routes> change > configuration>statndard configuration ---> select second option (development and productino System ) because here your dev system will your own system and virtual system would be production system .
---> pop up will come -> give DEV - SID and Productino SID- it willl automatically create the route .
Save this and exit.
This way We can set single system landscape.
Thanks and Regards,
Arun Rathour

Using TMS for setup system landscape

Hello everyone,
I'd like to setup system landscape (tr SMSY_setup) by using TMS and when i'm doing schedule data transfer from TMS/SLD background job is being canceled.
i'm recieving message "The SLD server connection is inactive" and dump "UNCAUGHT_EXCEPTION" there is. Why? I'm not using SLD.
regards,
Denis

Hi,
What do you mean by setup SMSY using TMS?
SMSY is getting all your system information like Add-on componenes, clients, hardware details, which the TMS cannot give. Understand the need for SMSY.
Feel free to revert back.
--Ragu

TMS Setup - One package to two seperate landscapes

My customer has one development instance that services two test and production landscapes for seperate geographical regions. This is a new installation and they are developing using packages. They currently belive that they can transport the objects from those packages to each landscape via the same package, transport layer and transport route. I'm contending that that is not possible due to each package having only one transport layer and that they will have to create a seperate package with the same objects for each landscape if they want to transport to both. I'm a bit inexperienced at this and could use any advice available to confirm that either I am right or that it is possible to transport to two seperate landscapes.. Is it possible to setup STMS transport routes to transport to two seperate environments from the same transport layer?
Regards.

Hi Joe,
Your contention is correct. A package/development class can be assigned to only one transport layer at a time.
My solution may not really match your business requirements. However if it possible to identify objects that will be needed in both the systems then you can assign them a single package which will have a common transport layer which will serve both the test systems and subsequently production systems. A bit of manual work but should solve this for you.
Regards.
Ruchit.

Setting up of TMS from Quality to Production systems

Hi ALL,
I have a query:
I have to setup the TMS in such a way that the transports from Client 110 of Quality server should ONLY go to Client 110 of Production server.
Similarly for client 120 of quality -> client 120 of Production.
Please be so kind to advice and help with detailed steps.
Rgs
Ipsita.

Hi Ipsita Guin
you create a route via Tcode STMS_PATH and create route Quality to Production.Logon Client 000 configure transport route.Now u can u define u r server
name.
http://help.sap.com/saphelp_nw2004s/helpdata/en/14/94fc3f8fc2c542e10000000a1550b0/frameset.htm
Thanks & Regards
Pankaj Kumar

TMS User Portal: The connection was reset. TMS 14.6.0 + TMSPE 1.4.0.8

Hello,
I am building a small CMR setup in my lab for a customer demo.
The problem is that TMS User Portal is not accessible and shows "The connection was reset". Everything else works fine.
I struggle to find any reference on similar issues. Can somebody please suggest where to start looking?
The setup details:
Windows Server 2012 Std, x64
SQL Server 2008 R2
Thank you in advance,
Best regards,
Dmitry.

I have installed jre-7u51-windows-x64.exe form the Java site. Installation went well, Java console shows 'enabled'. However, if I start TMS locally (127.0.0.1) and navigate to the Conference Control Center - it says:
"Java support has not been detected. This page requires Java to be installed and enabled in your browser. Java may not be installed, or may be disabled in your browser due to configuration or security settings."
What am I missing?

Mouse pointer is unchangeable at 100% scaling in multi monitor setup with different resolutions

Hi there, I have been asked by one of the moderators of the Windows 8.1 forums to post this topic here. You can see the thread relating to this post here
http://answers.microsoft.com/en-us/windows/forum/windows8_1-tms/cant-change-the-cursor-pointer/ae8ad8a0-3ded-4810-a3be-794f6c4830a4?msgId=2bd7082f-f5d1-4b01-8c70-e0d2a754d66f&page=1<o:p></o:p>
The problem: The mouse pointer becomes unchangeable in size, type, trails etc when 100% scaling is used. As in it reverts to the standard small white non-inverted, no trails,
no shadow 'pointer', no matter what options you select in the 'Mouse' control panel settings.<o:p></o:p>
This appears to be a scaling problem with the Windows 8/8.1 display, not an actual mouse problem. Judging by my own and other peoples experience it seems to happen mainly with multi
monitor setups where different screen resolutions are used. The issue occurs typically when 100% scaling for all monitors is used or this option is un-ticked and the 'change the size of all items' is on smallest (equivalent to 100%). <o:p></o:p>
If the scaling is set to 150% or greater the issue disappears and the mouse pointer becomes fully functional. Also bizarrely when the scaling is set to 100% if the screen is recorded
using a screen capture program, the recording of the screen shows the mouse pointer selected in the mouse options and not the default small white cursor that is present when recording it. Here is a link to a video where I explain and show the problem
happening on my system. http://youtu.be/xs2cxoeaq-A<o:p></o:p>
I have every update installed without exception, latest drivers etc. I use a 55" 4k screen with 2x1080p monitors in portrait on either side. All are connected through 1 Nvidia
GTX 780 6GB graphics card<o:p></o:p>
Hope you can help us<o:p></o:p>
thanks<o:p></o:p>
Jon M<o:p></o:p>

Hi Jon,
I'm looking into this issue but it will take me some time to provide a reply.
In the meantime I noticed that you have 3 monitors with 1x 55' and 2x27' - please have a try to only connect 1x27' monitor and see if issue persists.
Also please try to change the screen resolution to a lower size and see if issue persists.
Both suggestions are not solution, I just would like to know if it is related to multiple monitor or screen resolution.
If you have any feedback on our support, please send to [email protected]

Setup TMS

Similar Messages

Maybe you are looking for