Setup Utility Unable to Locate Router
I've been having a few problems installing a WRT54GC Router. I have no problems up to step 6, where it's supposed to check the router's status. Then, it tells me that it can't locate the router, which is connected completely correctly. The led lights above the corresponding Number, Power, and Internet headings are lit up, and it all seems to be in order. I've had this router installed before, but recently I had to uninstall it. I called my internet provider (Comcast), but all the person could say after having me on hold for half an hour was that there was a conflict between the internet and the router. And then she hung up. I know this supposed conflict isn't insurmountable, seeing as how I've had the router connected on a past occasion with no problem and the same internet provider, but this time, I just can't figure out what can possibly be wrong, when all the signs I'm seeing point to it being in perfect working condition.
Message Edited by Flexa on 01-31-2010 03:16 PM
Do not run the setup disk to configure the router..You can configure the router manually..
If your Internet Service Provider is Cable follow this link
If your Internet Service Provider is DSL follow this link
Similar Messages
-
Setup Wizard unable to locate Router. WRT54GR
After I run the Setup Wizard disc and hooked up the router as the disc instructs you to do I click on the "next" button after powering it on and I get a message that says "The Setup Wizard was unable to locate an Router on your network. Please make sure your Router is powered on and all cables are properly connected to your PC". It is hooked up correctly. The lights that are supposed to be on are on. The "wireless" and "internet" light are flashing very quickly though and not solid. Is this normal or not? Also when I first turned it on, my firewall recognized the network and asked me to assign it a name, so I don't understand why the Setup Wizard is not recognizing the router. This is for a WRT54GR.
Go to control panel>network connections>right-lick local area connection and click properties>highlight internet protocol tcp/ip and click properties. Make sure it's set to obtain an ip address automatically and obtain dns.
Hope this helps! (",)
The box said windows xp or better... So I installed Linux! -
I have a 21.5" iMac (Late 2012) running OS X Mavericks. I'm trying to install Windows 7 Ultimate via Bootcamp but whenever i get to the setup part it goes wrong
These are the steps I followed
I selected all the options since I didn't have the drivers or an install disk
it copied the Windows 7 iso image, downloaded the support software, and saved the support software to the flash drive (8GB)
I selected a partition size - I gave windows roughly 100GB
and I let it install
Right now I'm at the part where it says " where do you want to install windows? I selected the bootcamp partition and formatted it. It now says
"Setup was unable to create a new system partition or locate an existing system partition. See the Setup log files for more information"
WHAT DO I DO?I had to read the apple instructions several times before they started to make sense. I burned my iso onto a DVD and had the required USB for support software. Are you trying to use the single USB method?
This article has a lot of info on the single usb method -
I am trying to log onto my wireless connection but it keeps telling me I'm unable to locate any wireless network. I know there are several networks nearby. Is this a problem with my phone or my router?
I found a solution that has worked on both iPhone 4's I have that have had the same issues, and also including not being able to download updates in the App store.
Go to Settings > WiFi and turn it OFF.
Next go to General > Cellular > Cellular Data and turn it OFF
Next go back to Settings > WiFi and turn it ON, (wait a few seconds for it to sync with your network)
Finally go back to General > Cellular > Cellular Data and turn it ON.
I had the same issues on both my wife's phone, and my own, and it fixed it immediately without changing any proxy settings or reboots, (which I did try on my phone and did not work, but did not try on my wife's phone)
Hope this helps! -
I just bought an AirPort express. Currently I have a qwest wired router plugged into the back of my computer via an ethernet cable. Can I just unplug the ethernet cable and plug it into the AirPort express, then use the setup utility? Most of the discussions involve an existing wireless network. I don't have one.
Correct. That's the way to set up the AirPort Express. After connecting your AirPort Express to the router, open AirPort Utility (in /Applications/Utilities) and follow the steps
-
Locating my printer setup utility
I dont seem to have a printer setup utility how do i get one to add my new printer to?
did it go the way of my virex when i loaded leopard? cause im getting this error msg to list the new printer in the setup utility and my search provides no printer setup utility. is there a way to get this as a download?Yes ... here is a list of what I have done:
loaded the driver from supplied disk for printer lexmark x5470
followed directions of error msg and looked for the printer setup utility ... could not find
called lexmark (2ce)
1st time said I needed to down load the driver from their web site, which I did ... no resolution
2nd time they said I needed aforementioned utility and for me to contact Mac
(Mac has no phone support available for me or live online support so here I am at the discussion
boards)
reloaded Leopard ... still did not get a file called printer setup utility ... printer worked briefly and
then back to receiving error message. mainly from printing attempts from the web (only file I
could print from HD was a .tif file. all other .doc or .rtf would not print.)
opened disc utility and verified disc permissions ... some errors related to lexmark then repaired
tried moving the downloaded patch from lexmark around to applications and then to the lexmark
folder its self but nothing seemed to help
Is there not a Mac tech out there that could help? -
Linksys WRE54G - setup utility won't recognize my expander
I plugged in my range expander, run the setup utility and get the following message: "The setup utility was unable to locate a wireless-g range expander on your network. Please make sure your expander is powered on."
I'm looking at the range expander right now and it shows two solid blue lights.
How do I get this thing to work?Make sure that the computer you're using is on the same network with your router or is connected to your router's wireless network. After checking that, try running the setup cd again. If it doesn't work, you can manually setup the expander. This link will give you the instructions on how to setup the expander without the setup cd: http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=4d0870bf247a47e5b49b945a7a1ff515_Setting_up_the_Ra....
-
Cisco ASA 5505 VPN connection issue ("Unable to add route")
I'm trying to get IPSec VPN working onto a new Cisco ASA5505. Pretty standard configuration.
Setup:
* Cisco VPN client on Windows 7 (v5.0.07.0290 x64 on Laptop1 and v5.0.07.0440 x64 on Laptop2)
* PPPoE/NAT and internal DHCP on the ASA were configured with the Startup Wizard in ASDM
NATting is working fine - internal PCs get an IP address in the 192.168.2.0/24 range and can all access the Internet.
I wanted to be able to connect from anywhere to the ASA in order to reach one of the internal servers. Should be pretty basic.
First I tried with the built-in ASDM IPSec Wizard, instructions found here.
VPN clients can connect to the ASA, are connected (until they're manually disconnected), but cannot reach the internal network nor the Internet. Note VPN client can connect fine to a different VPN site (not administered by myself).
Client logs show following error messages:
1 15:53:09.363 02/11/12 Sev=Warning/3 IKE/0xA300005F
Firewall, Cisco Intrusion Prevention Security Agent, is not running, the client will not send firewall information to concentrator.
2 15:53:13.593 02/11/12 Sev=Warning/2 CVPND/0xE3400013
AddRoute failed to add a route with metric of 0: code 160
Destination 192.168.1.255
Netmask 255.255.255.255
Gateway 172.16.1.1
Interface 172.16.1.101
3 15:53:13.593 02/11/12 Sev=Warning/2 CM/0xA3100024
Unable to add route. Network: c0a801ff, Netmask: ffffffff, Interface: ac100165, Gateway: ac100101.
4 15:54:30.425 02/11/12 Sev=Warning/2 CVPND/0xA3400015
Error with call to IpHlpApi.DLL: CheckUpVASettings: Found IPADDR entry addr=172.16.1.101, error 0
5 15:54:31.433 02/11/12 Sev=Warning/2 CVPND/0xA3400015
Error with call to IpHlpApi.DLL: CheckUpVASettings: Found IPADDR entry addr=172.16.1.101, error 0
6 15:54:32.445 02/11/12 Sev=Warning/2 CVPND/0xA3400015
Error with call to IpHlpApi.DLL: CleanUpVASettings: Was able to delete all VA settings after all, error 0
7 20:50:45.355 02/11/12 Sev=Warning/3 IKE/0xA300005F
Firewall, Cisco Intrusion Prevention Security Agent, is not running, the client will not send firewall information to concentrator.
8 20:50:50.262 02/11/12 Sev=Warning/2 CVPND/0xE3400013
AddRoute failed to add a route with metric of 0: code 160
Destination 192.168.1.255
Netmask 255.255.255.255
Gateway 172.16.1.1
Interface 172.16.1.100
9 20:50:50.262 02/11/12 Sev=Warning/2 CM/0xA3100024
Unable to add route. Network: c0a801ff, Netmask: ffffffff, Interface: ac100164, Gateway: ac100101.
I've already tried the suggestions from this link, although the problem is different there (as the user can still access the internet, even without split tunneling, which I cannot).
A show run shows the following output (note in the below I have tried a different VPN network: 192.168.3.0/24 instead of 172.16.1.0/24 seen in the Client log)
Result of the command: "sh run"
: Saved
ASA Version 8.2(5)
hostname AsaDWD
enable password kLu0SYBETXUJHVHX encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif inside
security-level 100
ip address 192.168.2.254 255.255.255.0
interface Vlan2
nameif outside
security-level 0
pppoe client vpdn group DW-VPDN
ip address pppoe setroute
ftp mode passive
access-list inside_nat0_outbound extended permit ip any 192.168.3.0 255.255.255.240
pager lines 24
logging enable
logging asdm informational
mtu outside 1500
mtu inside 1500
ip local pool DWD-VPN-Pool 192.168.3.5-192.168.3.15 mask 255.255.255.0
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list inside_nat0_outbound
nat (inside) 1 0.0.0.0 0.0.0.0
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
http server enable
http 192.168.2.0 255.255.255.0 inside
http 0.0.0.0 0.0.0.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs group1
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map outside_map interface outside
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
telnet timeout 5
ssh timeout 5
console timeout 0
vpdn group DW-VPDN request dialout pppoe
vpdn group DW-VPDN localname fa******@SKYNET
vpdn group DW-VPDN ppp authentication pap
vpdn username fa******@SKYNET password *****
dhcpd auto_config outside
dhcpd address 192.168.2.5-192.168.2.36 inside
dhcpd domain DOMAIN interface inside
dhcpd enable inside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
group-policy DWD internal
group-policy DWD attributes
vpn-tunnel-protocol IPSec
username test password ******* encrypted privilege 0
username test attributes
vpn-group-policy DWD
tunnel-group DWD type remote-access
tunnel-group DWD general-attributes
address-pool DWD-VPN-Pool
default-group-policy DWD
tunnel-group DWD ipsec-attributes
pre-shared-key *****
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
Cryptochecksum:3e6c9478a1ee04ab2e1e1cabbeddc7f4
: end
I've installed everything using the CLI as well (after a factory reset). This however yielded exactl the same issue.
Following commands have been entered:
ip local pool vpnpool 172.16.1.100-172.16.1.199 mask 255.255.255.0
username *** password ****
isakmp policy 1 authentication pre-share
isakmp policy 1 encryption 3des
isakmp policy 1 hash sha
isakmp policy 1 group 2
isakmp policy 1 lifetime 43200
isakmp enable outside
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto dynamic-map outside_dyn_map 10 set transform-set ESP-3DES-SHA
crypto dynamic-map outside_dyn_map 10 set reverse-route
crypto dynamic-map outside_dyn_map 10 set security-association lifetime seconds 288000
crypto map outside_map 10 ipsec-isakmp dynamic outside_dyn_map
crypto map outside_map interface outside
crypto isakmp nat-traversal
sysopt connection permit-ipsec
sysopt connection permit-vpn
group-policy dwdvpn internal
group-policy dwdvpn attributes
vpn-tunnel-protocol IPSec
default-domain value DWD
tunnel-group dwdvpn type ipsec-ra
tunnel-group dwdvpn ipsec-attributes
pre-shared-key ****
tunnel-group dwdvpn general-attributes
authentication-server-group LOCAL
default-group-policy dwdvpn
Unfortunately I'm getting the same "AddRoute failed to add a route with metric of 0: code 160" error message.
I'm very confused as this should be a pretty standard setup. I tried to follow the instructions on the Cisco site to the letter...
The only "differences" in my setup are an internal network of 192.168.2.0 (with ASA IP address 192.168.2.254) and PPPoE with DHCP instead of no PPPoE at all.
Does anyone know what's going on?Yes, I have tried from a different laptop - same results. Using that laptop I can connect to a different IPSec site without issues.
Please find my renewed config below:
DWD-ASA(config)# sh run: Saved:ASA Version 8.2(5) !hostname DWD-ASAenable password ******* encryptedpasswd ****** encryptednames!interface Ethernet0/0 switchport access vlan 2!interface Ethernet0/1!interface Ethernet0/2!interface Ethernet0/3!interface Ethernet0/4!interface Ethernet0/5!interface Ethernet0/6!interface Ethernet0/7!interface Vlan1 nameif inside security-level 100 ip address 192.168.2.254 255.255.255.0 !interface Vlan2 nameif outside security-level 0 pppoe client vpdn group DWD ip address pppoe setroute !ftp mode passiveaccess-list inside_nat0_outbound extended permit ip any 192.168.50.0 255.255.255.224 pager lines 24logging asdm informationalmtu inside 1500mtu outside 1500ip local pool vpnpool 192.168.50.10-192.168.50.20 mask 255.255.255.0icmp unreachable rate-limit 1 burst-size 1no asdm history enablearp timeout 14400global (outside) 1 interfacenat (inside) 0 access-list inside_nat0_outboundnat (inside) 1 0.0.0.0 0.0.0.0timeout xlate 3:00:00timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolutetimeout tcp-proxy-reassembly 0:01:00timeout floating-conn 0:00:00dynamic-access-policy-record DfltAccessPolicyhttp server enablehttp 192.168.2.0 255.255.255.0 insidehttp 0.0.0.0 0.0.0.0 outsideno snmp-server locationno snmp-server contactsnmp-server enable traps snmp authentication linkup linkdown coldstartcrypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac crypto ipsec security-association lifetime seconds 28800crypto ipsec security-association lifetime kilobytes 4608000crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs group1crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAPcrypto map outside_map interface outsidecrypto isakmp enable outsidecrypto isakmp policy 10 authentication pre-share encryption 3des hash sha group 2 lifetime 86400telnet timeout 5ssh 0.0.0.0 0.0.0.0 outsidessh timeout 5console timeout 0vpdn group DWD request dialout pppoevpdn group DWD localname *****@SKYNETvpdn group DWD ppp authentication papvpdn username *****@SKYNET password ***** dhcpd auto_config outside!dhcpd address 192.168.2.10-192.168.2.40 insidedhcpd enable inside!threat-detection basic-threatthreat-detection statistics access-listno threat-detection statistics tcp-interceptwebvpn enable outside svc enablegroup-policy DfltGrpPolicy attributes vpn-tunnel-protocol IPSec l2tp-ipsec svc webvpngroup-policy dwdipsec internalgroup-policy dwdipsec attributes vpn-tunnel-protocol IPSec default-domain value DWDDOMusername user1 password ***** encrypted privilege 0username user1 attributes vpn-group-policy dwdipsectunnel-group dwdipsec type remote-accesstunnel-group dwdipsec general-attributes address-pool vpnpool default-group-policy dwdipsectunnel-group dwdipsec ipsec-attributes pre-shared-key *****tunnel-group dwdssl type remote-accesstunnel-group dwdssl general-attributes address-pool vpnpool!class-map inspection_default match default-inspection-traffic!!policy-map type inspect dns preset_dns_map parameters message-length maximum client auto message-length maximum 512policy-map global_policy class inspection_default inspect dns preset_dns_map inspect ftp inspect h323 h225 inspect h323 ras inspect rsh inspect rtsp inspect esmtp inspect sqlnet inspect skinny inspect sunrpc inspect xdmcp inspect sip inspect netbios inspect tftp inspect ip-options !service-policy global_policy globalprompt hostname context no call-home reporting anonymousCryptochecksum:f5c8dd644aa2a27374a923671da1c834: endDWD-ASA(config)# -
Disk Utility unable to partition as FAT32
Hello,
I am trying to set up bootcamp on my Late 2013 13" MBP running Yosemite 10.10.1 (14B25). I went and purchased a 16GB flash drive and directly followed the instructions laid out here. I have a family copy (3 activation codes) of Windows 7 Home Premium. I used the 64bit. After formatting my USB to FAT32, and mounting the W7 ISO, I followed and completed all instructions listed above
Upon rebooting into windows, I selected my partition labeled "BOOTCAMP" and tried to continue. I was prompted with "Setup was unable to create a new system partition or locate an existing system partition. See the Setup log files for more information." from the Windows installer. After coming across this thread, I removed anything plugged in (outside of the USB w/ W7 ISO) and tried again. No luck. Lastly, I tried moving the USB from the left to the right, no luck. I then tried to reformat the USB ISO as prompted by the Installer, and that didn't work. (I assume this would have wiped the drive - probably a dumb idea)
I restarted and booted into OSX. I assumed that my best bet would be to restart everything and try again. I removed the partition from my Microsoft HD, and went to erase my USB drive. Upon trying to reformat it as I had before, I realized there is no option for FAT32 in Disk Utility. I have attached an image of this. I am not sure what happened here. I have reformatted the drive by Erasing and Partitioning it multiple different times. Still not option for FAT32. I have been sure to have selected Master Boot Record.
I assume I now can't try again until I am able to reformat the USB into FAT32 so I can again mount my ISO and go from there.
Any guidance? What are my options here?Confirm that this is what you have been doing?
Selecting an Operating System During Startup
You can select which operating system to use during startup by holding down the Option key. This displays icons for all available startup disks, and lets you override the default setting for the startup disk in Startup Disk preferences (Mac OS X) or the Boot Camp control panel (Windows) without changing that setting.
To select an operating system during startup:
1 Restart your computer and hold down the Option key until disk icons appear onscreen.
2 Select the startup disk with the operating system you want to use, and then click the arrow beneath the icon.
11
12
Removing Windows from Your Computer
How you remove Windows from your computer depends on whether you installed Windows on a second disk partition or on a single-volume disk.
If you installed Windows on a second disk partition: Using Boot Camp Assistant as described below, remove Windows by deleting the Windows partition and restoring the disk to a single-partition Mac OS X volume.
If your computer has multiple disks and you installed Windows on a disk that has only one partition: Start up in Mac OS X and use Disk Utility, in the Utilities folder, to reformat it as a Mac OS X volume.
To delete Windows and the Windows partition:
1 Start up in Mac OS X.
2 Quit all open applications and log out any other users on your computer.
3 Open Boot Camp Assistant.
4 Select “Remove Windows 7,” and then click Continue.
5 Do one of the following:
 If your computer has a single internal disk, click Restore.
 If your computer has multiple internal disks, select the disk with Windows on it, and then select “Restore to a single Mac OS partition” and click Continue.
If yes, we now have to get you to get the MBP to boot and that is relatively easy, provided that you have followed all the right steps. -
Mac mini unable to locate airport express
Since getting new modem from Comcast Xfinity, Mac mini (Airport Utility) has been unable to locate Airport Extreme and Airport Express. Can anyone help?
OK, you have a choice you cannot use the Extreme as an extender, you can use it as your primary router or use the Comcast device as your primary router. If you choose to use the Extreme as your primary router then you need to call Comcast and ask them how to turn off the router abillities on their device. If you want to use the Comcast's router then you need to remove the Extreme from the equation and use the Express as an extender.
-
WVC54GCA. Seutp utility can't locate camera on network
I just bought the camera today. Went through each step of the setup. When I connect the camera, blue light flashes and then becomes steady. But then I get a message that says "The setup utility was unabel to locate the wireless-g internet home monitoring camera on your network." I've gone through those instructions several times, told it to search again, but it never finds it. My router is a Linksys WRT54G. I'd appreciate any ideas anybody may have. Thanks
hshi wrote:
I am sorry but it DID NOT work. Droyal7399, the article he/she gave you is about remotely access webcam which is totally irrelevant to what you've asked. I do not how you fixed it or you just dont' care...
If it is not detected using the setup CD, then you can configure it manually. Access the setup page of the camera and configure it via the setup page. The wireless settings should be the same with the wireless settings of your router.
Accessing the Setup Page of the Wireless-G Video Camera
Setting up a password on a Linksys Wireless Video Camera
Setting up the video camera using a wired connection -
Print Center / Printer Setup Utility missing
My refurb iMac had its entire logic board replaced several weeks ago. Since then I have not been able to use my Epson Stylus Photo R280 printer. Turns out that somehow my utilities called Print Center and also Printer Setup Utility have disappeared from my computer. Because it is a holiday, I am unable to to contact Apple Care by phone. I tried to locate a place on my Leopard install disk where it lists zillions of single items which I could chose to install, but can not find it. I am hoping that someone in here can direct me where to look. My Brother HL 2140 is working fine. I'm stumped.
HollyGot a reply from Epson. Even though I originally told them the printer was hooked up to a wireless Airport Extreme Base Station, they seemed to ignore that fact. But, finally they came up with this excuse:
Response (Stephan R) 08/21/2008 11:19 AM
The Epson Status Monitor requires constant bidirectional communication with the Host for it to function properly. The Airport Extreme only allows a one way communication, so when the Epson Status Monitor tries to update the Host with the proper ink levels you will receive a communication error.
So, I guess that you can't use the print utility from a wireless connection, I hooked the printer to one of my Macs and added the printer to the Utility there. The utility works there, but I have to reconnect the printer to the Airport Extreme and visa versa to make they whole thing functional. Oh, well. -
Java.io.FileNotFoundException: Unable to locate style sheet "oracle/webcent
Hi
I have created a webceter application in jdeveloper 11.1.1.4 with the default page templates and pages.
After creating the application i followed the below steps
1. Created a new skin file test-skin.css under webcontent/oracle/webcenter/portalapp/skins
2. Created a trinidad-skins.xml under WEB-INF and configured it as below
<?xml version="1.0" encoding="windows-1252" ?>
<skins xmlns="http://myfaces.apache.org/trinidad/skin">
<skin>
<id>testskin</id>
<family>testskin</family>
<version>
<name>v1</name>
<default>true</default>
</version>
<render-kit-id>org.apache.myfaces.trinidad.desktop</render-kit-id>
<style-sheet-name>oracle/webcenter/portalapp/skins/test-skin.css</style-sheet-name>
</skin>
</skins>
3. Made entry in the trinidad-config.xml as
<?xml version="1.0" encoding="windows-1252"?>
<trinidad-config xmlns="http://myfaces.apache.org/trinidad/config">
<skin-family>testskin</skin-family>
</trinidad-config>
4. Ran the portal but got error on the console as below
<StyleSheetEntry> <_getNameResolver> Could not load style sheet: oracle/webcenter/portalapp/skins/test-skin.css
<StyleSheetEntry> <_getNameResolver>
java.io.FileNotFoundException: Unable to locate style sheet "oracle/webcenter/portalapp/skins/test-skin.css" in local styles directory (C:\Users\197944 \AppData\Roaming\JDeveloper\system11.1.1.4.37.59.23\DefaultDomain\servers\DefaultServer\tmp\_WL_user\TestSkin_V2.0\7x71m9\public\adf\styles), or on the class path.
Please be sure that this style sheet is installed.
at org.apache.myfaces.trinidadinternal.skin.StyleSheetEntry._getNameResolverForStyleSheetFile(StyleSheetEntry.java:439)
at org.apache.myfaces.trinidadinternal.skin.StyleSheetEntry._getNameResolver(StyleSheetEntry.java:347)
at org.apache.myfaces.trinidadinternal.skin.StyleSheetEntry.createEntry(StyleSheetEntry.java:78)
at org.apache.myfaces.trinidadinternal.skin.SkinImpl._createStyleSheetDocument(SkinImpl.java:563)
at org.apache.myfaces.trinidadinternal.skin.SkinImpl.getStyleSheetDocument(SkinImpl.java:346)
at org.apache.myfaces.trinidadinternal.skin.SkinExtension.getStyleSheetDocument(SkinExtension.java:527)
at org.apache.myfaces.trinidadinternal.skin.SkinStyleProvider.createStyleSheetDocument(SkinStyleProvider.java:158)
at org.apache.myfaces.trinidadinternal.style.cache.FileSystemStyleCache._getStyleSheetDocument(FileSystemStyleCache.java:649)
at org.apache.myfaces.trinidadinternal.style.cache.FileSystemStyleCache._getEntry(FileSystemStyleCache.java:424)
at org.apache.myfaces.trinidadinternal.style.cache.FileSystemStyleCache.getStyleSheetURIs(FileSystemStyleCache.java:178)
at org.apache.myfaces.trinidadinternal.renderkit.core.xhtml.StyleSheetRenderer.encodeAll(StyleSheetRenderer.java:97)
at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:335)
at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:767)
at javax.faces.component.UIComponent.encodeAll(UIComponent.java:937)
at oracle.adfinternal.view.faces.renderkit.rich.DocumentRenderer._renderSkinStylesheet(DocumentRenderer.java:1999)
at oracle.adfinternal.view.faces.renderkit.rich.DocumentRenderer.encodeAll(DocumentRenderer.java:885)
at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1396)
at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:335)
at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:767)
at javax.faces.component.UIComponent.encodeAll(UIComponent.java:937)
at javax.faces.component.UIComponent.encodeAll(UIComponent.java:933)
at com.sun.faces.application.ViewHandlerImpl.doRenderView(ViewHandlerImpl.java:266)
at com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:197)
at javax.faces.application.ViewHandlerWrapper.renderView(ViewHandlerWrapper.java:189)
at org.apache.myfaces.trinidadinternal.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:193)
at oracle.webcenter.portalframework.sitestructure.handler.CustomViewHandler.renderView(CustomViewHandler.java:279)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._renderResponse(LifecycleImpl.java:777)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:293)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:213)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:266)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.portlet.client.adapter.adf.ADFPortletFilter.doFilter(ADFPortletFilter.java:32)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.webcenter.framework.events.dispatcher.EventDispatcherFilter.doFilter(EventDispatcherFilter.java:44)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:205)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:106)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:271)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:177)
at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.wcps.client.PersonalizationFilter.doFilter(PersonalizationFilter.java:75)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.webcenter.content.integration.servlets.ContentServletFilter.doFilter(ContentServletFilter.java:168)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.webcenter.lifecycle.filter.LifecycleLockFilter.doFilter(LifecycleLockFilter.java:151)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:175)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:136)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
I also tried creating portal resource for the skin by right clicking on the skin file, but i still get the same error.
If i create a skin file under anyother folder directly under the webcontent say /css/test-skin.css it works file.
Am i doing something wrong or missing any entries?Help is appreciated.
ThanksBy default, trinidad-config picks up the skin setup through the preference bean - "#{preferenceBean.defaultTrinidadSkin}". The default skin can be setup through adf-config.xml at design time (look for <portal:preference id="oracle.webcenter.portalapp.skin") or using the Administration console at run-time. The value used here is whatever you've configured as "Skin Family" when creating the portal resource.
Of course, you can edit the trinidad-config to hard-code the skin as well using the same "Skin Family" from the Create Portal Resource dialog. -
Add (+) printer in Sys Prefs Print & Fax makes Print Setup Utility crash!
Something is wrong with System Preferences Print & Fax pane, or something else... From there, I can't add any new printers. When you click + below the list, it's supposed to launch printer setup utility? But it does nothing what so ever.. or that's what I thought until I looked in Console to see what's going on (if anything), and the console reports that the printer setup utility crashed. It launches fine directly from Utilities. What gives?
Here is the crashlog report, if anyone can make sense of it:
Host Name: SunFlowerG4
Date/Time: 2008-09-12 20:05:39.525 -0700
OS Version: 10.4.11 (Build 8S165)
Report Version: 4
Command: Printer Setup Utility
Path: /System/Library/CoreServices/Printer Setup Utility.app/Contents/MacOS/Printer Setup Utility
Parent: WindowServer [88]
Version: 5.5 (227)
PID: 2883
Thread: 0
Exception: EXCBADACCESS (0x0001)
Codes: KERNPROTECTIONFAILURE (0x0002) at 0x00000000
Thread 0 Crashed:
0 libSystem.B.dylib 0x9012c6f0 mallocinitialize + 56
1 libSystem.B.dylib 0x900033b8 malloc + 48
2 com.apple.Foundation 0x92bcff74 _NSAPDataCreate + 32
3 com.apple.Foundation 0x92bd00f0 NSPushAutoreleasePool + 40
4 com.apple.AppKit 0x9387e2d0 NSApplicationMain + 60
5 com.apple.print.PrintCenter 0x00002690 0x1000 + 5776
Thread 0 crashed with PPC Thread State 64:
srr0: 0x000000009012c6f0 srr1: 0x000000000200d030 vrsave: 0x0000000000000000
cr: 0x44000222 xer: 0x0000000000000000 lr: 0x000000009012c6ec ctr: 0x00000000900017a0
r0: 0x000000009012c6ec r1: 0x00000000bffffa80 r2: 0x00000000a0001fac r3: 0x0000000000000000
r4: 0x0000000000000000 r5: 0x0000000092f45018 r6: 0x0000000000000001 r7: 0x0000000000000001
r8: 0x0000000000000002 r9: 0x0000000000000000 r10: 0x00000000900014f0 r11: 0x00000000a00061ec
r12: 0x00000000900017a0 r13: 0x0000000000000000 r14: 0x0000000000000000 r15: 0x0000000000000000
r16: 0x0000000000000000 r17: 0x0000000000000000 r18: 0x0000000000000000 r19: 0x0000000000000000
r20: 0x0000000000000000 r21: 0x0000000000000000 r22: 0x0000000000000000 r23: 0x0000000000000094
r24: 0x000000009fffc6c0 r25: 0x0000000000000000 r26: 0x00000000bffffcac r27: 0x00000000a37ce2a0
r28: 0x00000000a0003390 r29: 0x00000000a000c6c0 r30: 0x0000000000000000 r31: 0x000000009012c6c0
Binary Images Description:
0x1000 - 0x5fff com.apple.print.PrintCenter 5.5 (227) /System/Library/CoreServices/Printer Setup Utility.app/Contents/MacOS/Printer Setup Utility
0x8fe00000 - 0x8fe52fff dyld 46.16 /usr/lib/dyld
0x90000000 - 0x901bcfff libSystem.B.dylib /usr/lib/libSystem.B.dylib
0x90214000 - 0x90219fff libmathCommon.A.dylib /usr/lib/system/libmathCommon.A.dylib
0x9021b000 - 0x90268fff com.apple.CoreText 1.0.4 (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreText.framework/Versions/A/CoreText
0x90293000 - 0x90344fff ATS /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ATS.framework/Versions/A/ATS
0x90373000 - 0x9072efff com.apple.CoreGraphics 1.258.79 (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/CoreGraphics
0x907bb000 - 0x90895fff com.apple.CoreFoundation 6.4.11 (368.35) /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
0x908de000 - 0x908defff com.apple.CoreServices 10.4 (???) /System/Library/Frameworks/CoreServices.framework/Versions/A/CoreServices
0x908e0000 - 0x909e2fff libicucore.A.dylib /usr/lib/libicucore.A.dylib
0x90a3c000 - 0x90ac0fff libobjc.A.dylib /usr/lib/libobjc.A.dylib
0x90aea000 - 0x90b5cfff com.apple.framework.IOKit 1.4 (???) /System/Library/Frameworks/IOKit.framework/Versions/A/IOKit
0x90b72000 - 0x90b84fff libauto.dylib /usr/lib/libauto.dylib
0x90b8b000 - 0x90e62fff com.apple.CoreServices.CarbonCore 681.18 /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonC ore.framework/Versions/A/CarbonCore
0x90ec8000 - 0x90f48fff com.apple.CoreServices.OSServices 4.1 /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/OSServi ces.framework/Versions/A/OSServices
0x90f92000 - 0x90fd4fff com.apple.CFNetwork 4.0 (129.23) /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CFNetwo rk.framework/Versions/A/CFNetwork
0x90fe9000 - 0x91001fff com.apple.WebServices 1.1.2 (1.1.0) /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/WebServ icesCore.framework/Versions/A/WebServicesCore
0x91011000 - 0x91092fff com.apple.SearchKit 1.0.7 /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/SearchK it.framework/Versions/A/SearchKit
0x910d8000 - 0x91101fff com.apple.Metadata 10.4.4 (121.36) /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/Metadat a.framework/Versions/A/Metadata
0x91112000 - 0x91120fff libz.1.dylib /usr/lib/libz.1.dylib
0x91123000 - 0x912defff com.apple.security 4.6 (29770) /System/Library/Frameworks/Security.framework/Versions/A/Security
0x913dd000 - 0x913e6fff com.apple.DiskArbitration 2.1.2 /System/Library/Frameworks/DiskArbitration.framework/Versions/A/DiskArbitration
0x913ed000 - 0x913f5fff libbsm.dylib /usr/lib/libbsm.dylib
0x913f9000 - 0x91421fff com.apple.SystemConfiguration 1.8.3 /System/Library/Frameworks/SystemConfiguration.framework/Versions/A/SystemConfi guration
0x91434000 - 0x9143ffff libgcc_s.1.dylib /usr/lib/libgcc_s.1.dylib
0x91444000 - 0x914bffff com.apple.audio.CoreAudio 3.0.5 /System/Library/Frameworks/CoreAudio.framework/Versions/A/CoreAudio
0x914fc000 - 0x914fcfff com.apple.ApplicationServices 10.4 (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Application Services
0x914fe000 - 0x91536fff com.apple.AE 1.5 (297) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ AE.framework/Versions/A/AE
0x91551000 - 0x91623fff com.apple.ColorSync 4.4.10 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ColorSync.framework/Versions/A/ColorSync
0x91676000 - 0x91707fff com.apple.print.framework.PrintCore 4.6 (177.13) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ PrintCore.framework/Versions/A/PrintCore
0x9174e000 - 0x91805fff com.apple.QD 3.10.25 (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ QD.framework/Versions/A/QD
0x91842000 - 0x918a0fff com.apple.HIServices 1.5.3 (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ HIServices.framework/Versions/A/HIServices
0x918cf000 - 0x918f0fff com.apple.LangAnalysis 1.6.1 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ LangAnalysis.framework/Versions/A/LangAnalysis
0x91904000 - 0x91929fff com.apple.FindByContent 1.5 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ FindByContent.framework/Versions/A/FindByContent
0x9193c000 - 0x9197efff com.apple.LaunchServices 183 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ LaunchServices.framework/Versions/A/LaunchServices
0x9199a000 - 0x919aefff com.apple.speech.synthesis.framework 3.3 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ SpeechSynthesis.framework/Versions/A/SpeechSynthesis
0x919bc000 - 0x91a02fff com.apple.ImageIO.framework 1.5.7 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/ImageIO
0x91a19000 - 0x91ae0fff libcrypto.0.9.7.dylib /usr/lib/libcrypto.0.9.7.dylib
0x91b2e000 - 0x91b43fff libcups.2.dylib /usr/lib/libcups.2.dylib
0x91b48000 - 0x91b66fff libJPEG.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libJPEG.dylib
0x91b6c000 - 0x91c23fff libJP2.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libJP2.dylib
0x91c72000 - 0x91c76fff libGIF.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libGIF.dylib
0x91c78000 - 0x91ce2fff libRaw.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libRaw.dylib
0x91ce7000 - 0x91d24fff libTIFF.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libTIFF.dylib
0x91d2b000 - 0x91d45fff libPng.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libPng.dylib
0x91d4a000 - 0x91d4dfff libRadiance.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libRadiance.dylib
0x91d4f000 - 0x91e3dfff libxml2.2.dylib /usr/lib/libxml2.2.dylib
0x91e5c000 - 0x91e5cfff com.apple.Accelerate 1.2.2 (Accelerate 1.2.2) /System/Library/Frameworks/Accelerate.framework/Versions/A/Accelerate
0x91e5e000 - 0x91f43fff com.apple.vImage 2.4 /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vImage.fr amework/Versions/A/vImage
0x91f4b000 - 0x91f6afff com.apple.Accelerate.vecLib 3.2.2 (vecLib 3.2.2) /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/vecLib
0x91fd6000 - 0x92044fff libvMisc.dylib /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libvMisc.dylib
0x9204f000 - 0x920e4fff libvDSP.dylib /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libvDSP.dylib
0x920fe000 - 0x92686fff libBLAS.dylib /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libBLAS.dylib
0x926b9000 - 0x929e4fff libLAPACK.dylib /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libLAPACK.dylib
0x92a14000 - 0x92b02fff libiconv.2.dylib /usr/lib/libiconv.2.dylib
0x92b05000 - 0x92b8dfff com.apple.DesktopServices 1.3.7 /System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Desk topServicesPriv
0x92bce000 - 0x92df9fff com.apple.Foundation 6.4.10 (567.37) /System/Library/Frameworks/Foundation.framework/Versions/C/Foundation
0x92f26000 - 0x92f44fff libGL.dylib /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGL.dylib
0x92f4f000 - 0x92fa9fff libGLU.dylib /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGLU.dylib
0x92fc7000 - 0x92fc7fff com.apple.Carbon 10.4 (???) /System/Library/Frameworks/Carbon.framework/Versions/A/Carbon
0x92fc9000 - 0x92fddfff com.apple.ImageCapture 3.0 /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/ImageCapture. framework/Versions/A/ImageCapture
0x92ff5000 - 0x93005fff com.apple.speech.recognition.framework 3.4 /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/SpeechRecogni tion.framework/Versions/A/SpeechRecognition
0x93011000 - 0x93026fff com.apple.securityhi 2.0 (203) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/SecurityHI.fr amework/Versions/A/SecurityHI
0x93038000 - 0x930bffff com.apple.ink.framework 101.2 (69) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Ink.framework /Versions/A/Ink
0x930d3000 - 0x930defff com.apple.help 1.0.3 (32) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Help.framewor k/Versions/A/Help
0x930e8000 - 0x93116fff com.apple.openscripting 1.2.7 (???) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/OpenScripting .framework/Versions/A/OpenScripting
0x93130000 - 0x9313ffff com.apple.print.framework.Print 5.2 (192.4) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Print.framewo rk/Versions/A/Print
0x9314b000 - 0x931b1fff com.apple.htmlrendering 1.1.2 /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HTMLRendering .framework/Versions/A/HTMLRendering
0x931e2000 - 0x93231fff com.apple.NavigationServices 3.4.4 (3.4.3) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/NavigationSer vices.framework/Versions/A/NavigationServices
0x9325f000 - 0x9327cfff com.apple.audio.SoundManager 3.9 /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/CarbonSound.f ramework/Versions/A/CarbonSound
0x9328e000 - 0x9329bfff com.apple.CommonPanels 1.2.2 (73) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/CommonPanels. framework/Versions/A/CommonPanels
0x932a4000 - 0x935b2fff com.apple.HIToolbox 1.4.10 (???) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.fra mework/Versions/A/HIToolbox
0x93702000 - 0x9370efff com.apple.opengl 1.4.7 /System/Library/Frameworks/OpenGL.framework/Versions/A/OpenGL
0x93787000 - 0x93787fff com.apple.Cocoa 6.4 (???) /System/Library/Frameworks/Cocoa.framework/Versions/A/Cocoa
0x93789000 - 0x93dbcfff com.apple.AppKit 6.4.10 (824.48) /System/Library/Frameworks/AppKit.framework/Versions/C/AppKit
0x94149000 - 0x941bbfff com.apple.CoreData 91 (92.1) /System/Library/Frameworks/CoreData.framework/Versions/A/CoreData
0x941f4000 - 0x942b9fff com.apple.audio.toolbox.AudioToolbox 1.4.7 /System/Library/Frameworks/AudioToolbox.framework/Versions/A/AudioToolbox
0x9430c000 - 0x9430cfff com.apple.audio.units.AudioUnit 1.4 /System/Library/Frameworks/AudioUnit.framework/Versions/A/AudioUnit
0x9430e000 - 0x944cefff com.apple.QuartzCore 1.4.12 /System/Library/Frameworks/QuartzCore.framework/Versions/A/QuartzCore
0x94518000 - 0x94555fff libsqlite3.0.dylib /usr/lib/libsqlite3.0.dylib
0x9455d000 - 0x945adfff libGLImage.dylib /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGLImage.dyl ib
0x945b6000 - 0x945cffff com.apple.CoreVideo 1.4.2 /System/Library/Frameworks/CoreVideo.framework/Versions/A/CoreVideoWell I figured out how to run Printer Setup Repair to try that route. So far these results:
PERMISSIONS REPAIR:
Sunday, September 21, 2008 7:36:10 PM
Starting permission verification and repair, omitting localized files...
The file /System/Library/LaunchDaemons/printer.plist is missing!
The directory /usr/include is missing!
The directory /usr/include/cups is missing!
The file /usr/include/cups/cups.h is missing!
The file /usr/include/cups/http.h is missing!
The file /usr/include/cups/image.h is missing!
The file /usr/include/cups/ipp.h is missing!
The file /usr/include/cups/language.h is missing!
The file /usr/include/cups/md5.h is missing!
The file /usr/include/cups/ppd.h is missing!
The file /usr/include/cups/raster.h is missing!
Recreating symbolic links...
Done.
Verification complete.
912 files examined. No problems were found.
11 missing files/directories found during the verification process. They may be responsible for certain printing problems. Printer Setup Repair cannot replace these items. Please refer to the log file for a list of the missing files/directories. You may need to reinstall OS X to resolve your printing issues. Certain files and directories are deleted when using the Reset Printing System option. These files and directories, if required, will be recreated during normal printing.
All the other tabs on Printer Setup Repair were uneventful except the verify permissions on tmp items:
Sunday, September 21, 2008 7:48:36 PM
Begin deleting contents of the /private/tmp/501/TemporaryItems directory...
Unable to complete the process.
Error type 1: Unable to delete temporary files because the /private/tmp/501/TemporaryItems directory is missing or empty.
----------------------------- -
Bootcamp windows 7 setup was unable to create a new system partition
I've been trying to load Win 7 sp1 64 for a week. Tried 4 versions, all 64b, made a new USB drive each time, I always get stuck in the same place:
"setup was unable to create a new system partition or locate existing system partition". I've tried everything, read MANY forums.
I read format in set-up many times, but it matters not! HELP!Restart your machine and do a pram reset (google)
Open disk utility and repair permissions twice, also you should only have 1 partition
Then try boot camp assistant again
If this doesn't work, you'll need to either clean install OSX or have a terminal disk wizard from here try and help
Maybe you are looking for
-
Help! My Acrobat keeps crashing when I view comments...
I'm running a MAC OS X (version 10.6.8), my acrobat pro XI keeps crashing when I am viewing comments from my clients. I need to view what they're saying so I can make appropriate edits to my design files...but I can't even view one without Acrobat cr
-
This program won't work for some reason
I'm having trouble with getting this program to do what I want. It reads in a file and identifies certain parts that follow the rules I've given. The first version below is one that works. It simply prints out the string if it meets the conditions in
-
Need help with assignment for class. its for my high school project :(
i really need help, my problem is that with my code i cannot get the "previous", "done" and "next" buttons to work.they cannot seem to find the items from each other. so could someone look at those buttons in the code and tell me how to fix please? t
-
HT1386 how can I unlock a 1st generation Ipod touch?
how can i unlock a 1st generation ipod touch that i forgot the password to??
-
Hi Friends, I would like to have DMS Config Document / Process Flow documents etc. , can anybody send the same to my following email id or give me link Points will be rewarded Rgds, Vikas