Setup will not initialize

When I try to run 'setup.exe' for the first time it begins to
initialize and then gives me this message:
"Setup has encountered an error and cannot continue. Contact
Adobe Customer Support for assistance.
Internal Error 2739"
There was nothing in the knowledge base about this and I
can't figure out what to do. Also, sorry if this is in the wrong
place.

If you need help to locate your serial number, see this document: http://kb2.adobe.com/cps/152/tn_15290.html.
You'll need to reinstall the software again beforew you can use it. You can use the original media to reinstall the software. As your hard disk crashed, your software is still activated, you will need to get in touch with Adobe support to reactivate on the new HD. See http://kb2.adobe.com/cps/100/1008779.html for details.

Similar Messages

  • Multiple programs will not initialize G5

    Dual 2.3 G5 (June 2005) - Mac has been on or asleep for a few days. Went to open up GarageBand and received an OSX terminiated application message. Ran Disk Utility. Everything OK. Tried to restart, but the computer did not shut down - only the blank blue screen with all the icons reappearing. Same thing at shut down. Did power off and reboot a couple of times.
    Activity Monitor will not run, nor Software Update. A few apps here and there will run, but so far, Safari only flashes for a second, Logic Pro, Ableton Live will not initialize. Can not add a user in the Systems Preference - when I try to hit one of the tabs in Accounts, System Preferences shuts down.
    Removed all peripherals with exception of track ball and Bluetooth.
    Just trying to postpone the inevitable, I suppose. Thanks for your help.
    Dual 2.3 G5 5.5 RAM, 1.66 Intel Mini, MacBook 2.0, iMac 24", PowerBook G4 15"   Mac OS X (10.4.9)  
    Dual 2.3 G5 5.5 RAM, 1.66 Intel Mini, MacBook 2.0, 1.42 Mini, PowerBook G4 15"   Mac OS X (10.4.9)  
      Mac OS X (10.4.9)  

    The inevitable would be:
    SuperDuper
    Disk Warrior
    Applejack
    2 backup sets
    an emergency boot drive
    If Safe Boot doesn't work, often trying to use fsck won't, so I use fsck first if not alternate boot to the emergency drive (Firewire).
    Cleaning out all the temp and cache files can help, at first.
    Have your test user account setup ahead of time and tested, along with a routine for backups and what to do when there is a failure.
    Why does it happen? bad sector on the disk? bad RAM? software conflict? UPS didn't kick in when needed during a dip in power?
    Doing a backup + erase + restore on a regular basis can also keep a system running more smoothly. And keep your boot drive with 40% or more free space, and upgrade your drives regularly (use old drives for backups).
    Filesystems don't take kindly to freezes or trying to "plow through" a problem, and just bury the cause or underlying corrupt file or directory. Postponing insures it will be worse than it would have been.

  • External hard drive will not initialize

    I am running windows 7 32 bit and have a 80gb external hard drive.  When I connect the hard drive it shows up with all the correct drivers and and under the Disk management console it comes up but will not initialize.  The Initialize disk wizard
    comes up and I have tried to do both option and a window comes up with "incorrect function".  I can see the disk in disk management but when I right click on the Disk 1 the only options are properties and help.  Initialized disk is at the top but
    I am unable to click it.    
    How do I initialize a disk that will not give me a Initialize disk option?
    Can I use Boot and Nuke to clear this drive during a startup?

    Hi,
    Go to BIOS to check if BIOS can recognize the external HD.
    Also you can try to use these command below:
    1 Run CMD with administrator
    2 Input diskpart and press Enter
    3 Input these command:
    DISKPART> SELECT DISK n (n is the disk number)
    DISKPART> ATTRIBUTES DISK CLEAR READONLY
    DISKPART> ONLINE DISK
    DISKPART> CONVERT MBR
    Hope that helps.
    Regards,
    Leo  
    Huang
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • Adobe Premiere Elements 12 Setup will not accept my Serial Number!

    Adobe Premiere Elements 12 Setup will not accept my Serial Number!

    What message do you get that indicates it is not accepting your serial; number?

  • PSE 12 Installer will not initialize

    So, downloaded PSE 12 without problem.
    Run the installer and get the "installer will not initialize" message. 
    Running MAC OS 10.9 on Macbook Pro.
    No log created to tell me what has happened.

    Hi SteveB_MK,
    Please steps mention in given link below and let us know if it helps you:-
    http://helpx.adobe.com/photoshop-elements/kb/troubleshoot-installation-photoshop-elements- premiere.html
    Regards,
    Sarika

  • Elements 8 will not initialize online services

    I have just upgraded and installed Elements 8 I am running Windows 7. When I start the organizer it will not initialize online services preventing me from using Photomail. I have attempted using Adobe Email Client and also sending as an attachment, neither has been successful.
    Please help.
    Thank you!
    [email protected]

    Can you describe more about what you mean by it not initializing online services?
    Are you getting any kind of error message?

  • Disk image will not initialize.

    After downloading several times, disk image will not initialize. Dialog box -"The following disk images couldn't be opened Firefox 33.0.2 not recognized."
    Mac OSX 7.5.2

    Thanks for the reply - unfortunately I can not see the Firefox Disk image, the file that I downloaded shows up, but does not create the Disk Image required to begin the installation process.
    I have re-downloaded the file from Mozilla several times with the same result.

  • I friend has given me his original copy of Photoshop Elements 11.  It will not load on to my computer. Mac. mini. I keep getting will not initialize.

    I friend has given me his original copy of Photoshop Elements 11.  It will not load on to my computer. Mac. mini. I keep getting will not initialize.

    I own the businesses, so there are no restrictions. Even my personal page has the same problem. I've been working on FB for years with no access problems. Ironically, the problem started the day the FB IPO went public. At first, the "freeze" happened when I tried to view a photo. Now it happens virtually every time I try to do anything: view a friend's page, try to use "chat."
    I'm at a loss. I would view it as a blessing, except that too many of my "friends" and family only use FB to communicate. I'm afraid that's how the world is today, and we can't turn back the clock.

  • Photoshop elements 13 will not initialize after the program has been opened

    Photoshop Elements 13 will not initialize after the program has been opened once.  If I remove Elements processes from task manager, Organizer will open  I am using Windows 7 and Elements 12 is also installed on the same computer.

    the password and licensing agreement are needed for installation, not to run.
    check your install logs, Troubleshoot with install logs | CS5, CS5.5, CS6, CC

  • GB will not initialize audio units without Steinberg dongle

    I want to use my macbook to produce podcasts. I occasionally also use the macbook to run cubase and a suite of Steinberg stuff (vst instruments etc.) which are installed on the macbook. However, I usually use my Mac Pro for the Steinberg software.
    The problem is that GB will not initialize unless I have the Steinberg license dongle (elicenser) plugged into the macbook. I don't really want to move the dongle around all the time, as occasionally both GB and the Steinberg stuff will be in use at the same time in my studio.
    Is there a way to get GB to ignore the installed Steinberg plugins?

    i believe you'd have to remove the AUs (GB doesn't use VST) from the Components folder before launch

  • PSE 5 will not load- DirectX will not initialize

    When trying to load photoshop elements 5.0.2,  I get an error message that Directx is installed, but will not initialize.  What can I do to get this program to initialize?  It used to work...
    Help

    Member on LinkedIn and there is a group Adobe Software Users- some Adobe employees are there and responded to my question. This is where I found my answer but if you also try another forum such as one for Ae or which ever one you are having problems with I feel you will get ans answer. This forum is very old and this application is no longer in Adobe's radar as they have pretty much canned this application. If you go here http://forums.adobe.com/index.jspa you can select the forum for the app. you wish. Hope all this helps.

  • Portal will not initialize.

    Hello folks,
    I was working on adding an datasource (MSADS) to EP6SP2.
    I made the changes and restarte dthe serverce couple time I had errors. Now the portal will not initialize. I get the following error.
    What are my options now? How can I bring up the portal?
    Apr 21, 2006 7:47:06 PM # System_Thread_36     Fatal           [Portal.init] Application Broker - initialization failed.
    com.sapportals.portal.prt.runtime.PortalException: [Portal Application Broker] applications start failed
         at com.sapportals.portal.prt.core.broker.PortalAppBroker.start(PortalAppBroker.java:1431)
         at com.sapportals.portal.prt.core.broker.PortalAppBroker.startCoreApplications(PortalAppBroker.java:1360)
         at com.sapportals.portal.prt.runtime.Portal.init(Portal.java:345)
         at com.sapportals.portal.prt.core.PortalCoreInitializer.coreInit(PortalCoreInitializer.java:54)
         at com.sapportals.portal.prt.dispatcher.PortalInitializer.<init>(PortalInitializer.java:129)
         at com.sapportals.portal.prt.dispatcher.Dispatcher$doSetupPortalInitializer.run(Dispatcher.java:160)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sapportals.portal.prt.dispatcher.Dispatcher.initDispatcher(Dispatcher.java:358)
         at com.sapportals.portal.prt.dispatcher.Dispatcher.access$000(Dispatcher.java:40)
         at com.sapportals.portal.prt.dispatcher.Dispatcher$InitRunner.run(Dispatcher.java:113)
         at com.sapportals.portal.prt.dispatcher.Dispatcher.init(Dispatcher.java:391)
         at com.inqmy.services.servlets_jsp.server.ServletContextFacade.init(ServletContextFacade.java:3338)
         at com.inqmy.services.servlets_jsp.server.ServletContextFacade.init(ServletContextFacade.java:2596)
         at com.inqmy.services.servlets_jsp.server.ServletsAndJspImpl.createContext(ServletsAndJspImpl.java:765)
         at com.inqmy.services.servlets_jsp.server.ServletsAndJspImpl.<init>(ServletsAndJspImpl.java:200)
         at com.inqmy.services.servlets_jsp.server.ServletsAndJspServerFrame.start(ServletsAndJspServerFrame.java:125)
         at com.inqmy.core.service.application.ApplicationServiceRunner.startFrame(ApplicationServiceRunner.java:55)
         at com.inqmy.core.service.container.ServiceRunner.run(ServiceRunner.java:129)
         at com.inqmy.core.thread.impl0.ActionObject.run(ActionObject.java:46)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.inqmy.core.thread.impl0.SingleThread.run(SingleThread.java:148)
    Caused by: com.sapportals.portal.prt.runtime.PortalException: [PortalServiceItem.startServices] initialisation failed:com.sap.portal.license.runtime|license
         at com.sapportals.portal.prt.core.broker.PortalServiceItem.startServices(PortalServiceItem.java:883)
         at com.sapportals.portal.prt.core.broker.PortalAppBroker.startLoadOnStartupServices(PortalAppBroker.java:1470)
         at com.sapportals.portal.prt.core.broker.PortalAppBroker.start(PortalAppBroker.java:1426)
         at com.sapportals.portal.prt.core.broker.PortalAppBroker.startCoreApplications(PortalAppBroker.java:1360)
         at com.sapportals.portal.prt.runtime.Portal.init(Portal.java:345)
         at com.sapportals.portal.prt.core.PortalCoreInitializer.coreInit(PortalCoreInitializer.java:54)
         at com.sapportals.portal.prt.dispatcher.PortalInitializer.<init>(PortalInitializer.java:129)
         at com.sapportals.portal.prt.dispatcher.Dispatcher$doSetupPortalInitializer.run(Dispatcher.java:160)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sapportals.portal.prt.dispatcher.Dispatcher.initDispatcher(Dispatcher.java:358)
         at com.sapportals.portal.prt.dispatcher.Dispatcher.access$000(Dispatcher.java:40)
         at com.sapportals.portal.prt.dispatcher.Dispatcher$InitRunner.run(Dispatcher.java:113)
         at com.sapportals.portal.prt.dispatcher.Dispatcher.init(Dispatcher.java:391)
         at com.inqmy.services.servlets_jsp.server.ServletContextFacade.init(ServletContextFacade.java:3338)
         at com.inqmy.services.servlets_jsp.server.ServletContextFacade.init(ServletContextFacade.java:2596)
         at com.inqmy.services.servlets_jsp.server.ServletsAndJspImpl.createContext(ServletsAndJspImpl.java:765)
         at com.inqmy.services.servlets_jsp.server.ServletsAndJspImpl.<init>(ServletsAndJspImpl.java:200)
         at com.inqmy.services.servlets_jsp.server.ServletsAndJspServerFrame.start(ServletsAndJspServerFrame.java:125)
         at com.inqmy.core.service.application.ApplicationServiceRunner.startFrame(ApplicationServiceRunner.java:55)
         at com.inqmy.core.service.container.ServiceRunner.run(ServiceRunner.java:129)
         at com.inqmy.core.thread.impl0.ActionObject.run(ActionObject.java:46)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.inqmy.core.thread.impl0.SingleThread.run(SingleThread.java:148)
    Caused by: com.sapportals.portal.prt.core.broker.PortalServiceInstantiationException: Could not instantiate implementation class com.sapportals.portal.prt.service.license.LicenseService of Portal Service com.sap.portal.license.runtime|license because: could not load the service
         at com.sapportals.portal.prt.core.broker.PortalServiceItem.__initServiceInstance(PortalServiceItem.java:689)
         at com.sapportals.portal.prt.core.broker.PortalServiceItem.createServiceInstance(PortalServiceItem.java:519)
         at com.sapportals.portal.prt.core.broker.PortalServiceItem.startServices(PortalServiceItem.java:875)
         at com.sapportals.portal.prt.core.broker.PortalAppBroker.startLoadOnStartupServices(PortalAppBroker.java:1470)
         at com.sapportals.portal.prt.core.broker.PortalAppBroker.start(PortalAppBroker.java:1426)
         at com.sapportals.portal.prt.core.broker.PortalAppBroker.startCoreApplications(PortalAppBroker.java:1360)
         at com.sapportals.portal.prt.runtime.Portal.init(Portal.java:345)

    The last 10 lines is what I commented out as I was using multiple datasources. he following line
    ume.persistence.data_source_configuration=dataSourceConfiguration_ads_writeable_db.xml should be a different file.
    The server is set to MSADS mode but I commented out those lines. So the server does not find the file. Is there a way to fix this??
       SAP User Management Engine Configuration
       Logging settings
    ##The external class for the portal logger should be used.
    ##If trace file from native logging api should be used, set this property to "com.sap.security.core.util.imp.UMTrace_EX"
    ##and set properties "ume.trace.trace_level" and "ume.trace.debug_exception_level" to a severity level from 1 to 5.
    ume.trace.external_trace_class=com.sapportals.portal.prt.service.usermanagement.util.UMTrace_620_Portal
       Data source settings
    ##xml file that configures the persistence except roles
    ume.persistence.data_source_configuration=dataSourceConfiguration_ads_writeable_db.xml
    ##xml file that configures the roles persistence which are coming from the pcd
    NOTE: ume.persistence.pcd_roles_data_source_configuration AND ume.persistence.ume_roles_data_source_configuration
          mustn't be used together.  
    ume.persistence.pcd_roles_data_source_configuration=dataSourceConfiguration_PCDRoles.xml
    ##xml file that configures the roles persistence which are coming from the ume
    NOTE: ume.persistence.ume_roles_data_source_configuration AND ume.persistence.pcd_roles_data_source_configuration
          mustn't be used together.  
    #ume.persistence.ume_roles_data_source_configuration=dataSourceConfiguration_UMERoles.xml
    ##specification of the default cache
    ume.cache.default_cache=distributableCache
       LDAP settings
    ##specifies the servertype NOVELL oder SUN
    ume.ldap.access.server_type
    ##the ldap server name
    ##ume.ldap.access.server_name=NortDC.fngp.com,PlymDC.fngp.com
    ##the port of the ldap server
    ##ume.ldap.access.server_port=389,389
    ##the user used for connecting to the ldap server
    ##ume.ldap.access.user=FNGP
    ADSUser
    ##the password of the user
    ##ume.ldap.access.password=
       database settings
       R/3 settings (for use as Master datasource)
    Start of Required keys for R/3 connection
    2hNbedUUwhwiKCN6wpZqXw\=\=
    ##true if ssl is used, false if not
    ume.ldap.access.ssl=FALSE
    ##the path in the ldap server, where the users are found
    ##ume.ldap.access.base_path.user=OU\=FNGP,DC\=fngp,DC\=com
    ##the path in the ldap server, where the useraccounts are found; only nedded if a user object is not an account object
    #ume.ldap.access.base_path.uacc=
    ##the path in the ldap server, where the groups are found
    ##ume.ldap.access.base_path.grup=OU\=Portal Groups,OU\=FNGP,DC\=fngp,DC\=com
    ##the data for the connection pool
    ume.ldap.connection_pool.min_size=1
    ume.ldap.connection_pool.max_size=10
    ume.ldap.connection_pool.max_idle_connections=5
    ume.ldap.connection_pool.max_idle_time=600000
    ume.ldap.connection_pool.max_wait_time=60000
    ume.ldap.connection_pool.monitor_level=0
    ume.ldap.connection_pool.retrial=10
    ume.ldap.connection_pool.retrial_interval=10000
    ume.ldap.connection_pool.release_check_interval=120000
    ##specify if you want to user an internal or external connection pool
    ume.db.connection_pool_type=jdbc/sapep
    ##if you are using an internal connectionpool please use the following properties to configure the connections
    ##specify the database driver
    ume.db.jdbc_driver
    ##specify the database url
    ume.db.jdbc_url
    ##specify the database user
    ume.db.jdbc_user
    ##specify the user password
    ume.db.jdbc_password
    ##if you are using an external cnnectionpool
    ##(connection pool of the j2ee engine) please use the following properties to configure the connectionpool
    ##the context factory of the j2ee connection pool
    ume.db.connection_pool.j2ee.initial_context_factory=com.inqmy.services.jndi.InitialContextFactoryImpl
    ##the provider url of the j2ee connetion pool
    ume.db.connection_pool.j2ee.provider_url=localhost
    ##setting of the internal database connection pool
    ume.db.connection_pool.internal.minsize=1
    ume.db.connection_pool.internal.maxsize=30
    ume.db.connection_pool.internal.max_idle_connections=5
    ume.db.connection_pool.internal.max_connection_idle_time=600000
    ume.db.connection_pool.internal.max_wait_process_time=600000
    ume.db.connection_pool.internal.monitor_interval=500
    ume.db.connection_pool.internal.connect_retrials=0
    ume.db.connection_pool.internal.max_connection_usage_timel=600000
    ume.db.connection_pool.internal.max_connection_usage_time_check_interval=60000
    ume.db.connection_pool.internal.monitor_path=./
    ume.r3.connection.master.client
    ume.r3.connection.master.user
    ume.r3.connection.master.passwd=g8EnrAsDbQw\=
    ume.r3.connection.master.sysnr
    ume.r3.connection.master.useXML=false
    R/3 application name (only CRM and EBP are supported)
    ume.r3.connection.master.application
    End of required keys
    Start of required-optional keys
    One of following 3 options is required:
    Option 1: application host name
    ume.r3.connection.master.ashost
    Option 2:  (name used to map to the sapmsg.ini file.)
    #ume.r3.connection.master.r3name=
    Option 3: message server
    #ume.r3.connection.master.msghost=<message server>
    Required when options 2 and 3 are used  (e.g. PUBLIC)
    #ume.r3.connection.master.group=<group of message server>
    End of required-optional keys
    Start of optional keys
    ume.r3.connection.master.lang=EN
    number of connections to create in the connection pool
    ume.r3.connection.master.poolmaxsize=10
    Time in milliseconds to wait for available connection before error
    ume.r3.connection.master.poolmaxwait=10000
       Security Policy
    ume.logon.security_policy.useridminlength=6
    ume.logon.security_policy.useridmaxlength=20
    ume.logon.security_policy.userid_in_password_allowed=TRUE
    ume.logon.security_policy.oldpass_in_newpass_allowed=TRUE
    ume.logon.security_policy.password_min_length=6
    ume.logon.security_policy.password_max_length=10
    ume.logon.security_policy.password_mix_case_required=0
    ume.logon.security_policy.password_alpha_numeric_required=0
    ume.logon.security_policy.password_special_char_required=0
    ume.logon.security_policy.password_change_allowed=FALSE
    ume.logon.security_policy.lock_after_invalid_attempts=6
    ume.logon.security_policy.auto_unlock_time=60
    ume.logon.security_policy.password_expire_days=99999
    ume.logon.security_policy.cert_logon_required=FALSE
    ume.logon.security_policy.cookie_life_time=172800
       security parameters
    path of your IAIK keystore
    login.ticket_keystore=ticketKeyStore
    Key pair alias with the Keystore ('sapportal' recommended for new install)
    login.ticket_keyalias=TestKey
    login.ticket_lifetime=8
    url of the SAP trustcenter that signed the portal key (req. for RA functionality)
    trustcenter=https://tcs.mysap.com/invoke/tc/usercert
    logical adapter name of authenticating backend
    credentials are checked against this specified repository (see  repository_configuration_file)
    login.authentication_server=Corporate Authentication Server
    #authschemes conf xml file
    login.authschemes.definition.file=authschemes.xml
    ume.superadmin.activated=FALSE
    (Comma separated) list of role xml files
    #ume.roles.xml_files = *role.xml
    Self Registration  ################################
    to enable self registration process. (default: true)
    ume.logon.selfreg=true
    ume.admin.selfreg_company=false
    Notification Mails ################################
    mail host, separated by semicolon if several hosts
    ume.notification.mail_host=<mailhost1>;<mailhost2>;<mailhost3>
    ume.notification.mail_host=nort-smtpsrv-1.fngp.com
    Email sending mode
    asynchronous is preferred especially when many emails are sent out
    ume.notification.email_asynch=TRUE
    Sending an email on the below events can be switched on(default)/off
    ume.notification.create_request=true
    ume.notification.create_approval=true
    ume.notification.create_performed=TRUE
    ume.notification.pswd_reset_request=TRUE
    ume.notification.pswd_reset_performed=TRUE
    ume.notification.unlock_request=true
    ume.notification.lock_performed=TRUE
    ume.notification.unlock_performed=TRUE
    ume.notification.delete_performed=TRUE
    ume.notification.create_by_batch_performed=TRUE
    ume.notification.update_by_batch_performed=TRUE
    ume.notification.create_denied=true
       anonymous user
    Defines which mode of anonymous logon is to be used. Default value is 1.
    1 = Anonymous logon with named anonymous users is used.
    0 = Simple anonymous logon is used.
    ume.login.anonymous_user.mode=1
    Comma-separated list of guest users that are supported. These users must exist with this unique ids in the user repository. This parameter does only take effect if ume.login.anonymous_user.mode=1
    ume.login.guest_user.uniqueids=anonymous
       user admin
    ume.admin.search_maxhits_warninglevel=200
    ume.login.guest_user.defaultid=anonymous
    login.ticket_issuer=FNN
    ume.license.sysid=FNN
    #Additional properties
    #Sat Nov 13 17:49:49 EST 2004
    ume.r3.mastersystem=
    ume.r3.connection.master.r3name=
    ume.r3.connection.master.msghost=
    ume.r3.connection.master.group=
       LogOff
    ume.logoff.redirect.url=http://nortweb1.fngp.com/cleartrust/ct_logout.asp
    ume.logoff.redirect.silent=false
    #Additional properties
    #Fri Apr 21 18:34:00 EDT 2006
    #ume.ldap.access.server_port=389
    #ume.ldap.access.user=FNGPEXT
    adm_msb
    #ume.ldap.access.password=xDhj3ijP/xaX74LzqzAPJw\=\=
    #ume.ldap.access.server_name=Nortextdc.fngpext.com
    #Additional properties
    #Fri Apr 21 18:35:36 EDT 2006
    #ume.ldap.access.base_path.user=OU\=FNGPEXT,DC\=fngpext,DC\=com
    #ume.ldap.access.base_path.grup=OU\=FNGPEXT,DC\=fngpext,DC\=com

  • Application manager will not initialize

    need the application manager on PC 8.1 for Premier to operated, manager download will not initialize. Comments?

    A chat session where an agent may remotely look inside your computer may help
    Creative Cloud chat support (all Creative Cloud customer service issues)
    http://helpx.adobe.com/x-productkb/global/service-ccm.html

  • ASMlib will not initialize after reboot. OEL6.6

    Greetings,
    After some routine maintenance and cleaning up trace and alert logs on a dev server, a reboot was performed.
    When the server came back up, the ASMlib would not initialize, and the /dev/oracleasm/disks folder was gone. ASMlib has been in use since day one on this machine, and has given no troubles in six months of operation.
    Querying the disks shows that the headers are still intact, and that they are labelled as ASM disks.
    Attempting to re-configure via /etc/init.d/oracleasm configure lead to no success.
    I've also uninstalled and re-installed the oracle asm packages.
    [root@oraserver~]# rpm -qa | grep asm
    kmod-oracleasm-2.0.8-4.el6_6.x86_64
    oracleasm-support-2.1.8-1.el6.x86_64
    a tail of /var/log/oracleasm shows:
    tail -f /var/log/oracleasm
    Unable to instantiate disk "VOL2"
    Loading module "oracleasm": failed
    Unable to load module "oracleasm"
    Loading module "oracleasm": failed
    Unable to load module "oracleasm"
    Creating /dev/oracleasm mount point: /dev/oracleasm
    Loading module "oracleasm": failed
    Unable to load module "oracleasm"
    Loading module "oracleasm": failed
    Unable to load module "oracleasm"
    kernel:
    uname -r
    2.6.32-504.1.3.el6.x86_64.debug
    at this point, I'm out of ideas, and google has not been terribly helpful. Has anyone else run across this before? I'll get what ever information you might need to help suss out a cause.
    Thanks for your time,
    Ken

    Cleaning the database diag directories cannot affect ASMLib. The problem must be something else. Since all the ASM device and diskgroup information is stored on the disks, it should be sufficient to simply re-install and reconfigure the software.
    All ASMLib installations require the oracleasmlib and oracleasm-support packages in addition to the kernel driver, which is built-in only if you are using the Oracle UEK kernel. You might be missing the oracleasmlib package.
    Perhaps the following will solve the problem:
    su - root
    wget http://download.oracle.com/otn_software/asmlib/oracleasmlib-2.0.4-1.el6.x86_64.rpm
    yum install ./oracleasmlib-2.0.4-1.el6.x86_64.rpm
    /etc/init.d/oracleasm configure

  • SCXI 1520 quarter bridge setup will not output excitation voltage, but full bridge will

    My SCXI system will not output an excitation voltage to the quarter bridge(verified with voltmeter). It works for a full bridge setup. When connected to a 'quarter bridge I' configuration, I can use MAX to null and shunt calibrate. The quarter bridge circuit appears to be balanced after the calibration, but the calibration results post a software gain factor close to zero, as well as a close to zero excitation voltage (eventhough I have the voltage configured for 5 volts). I have the SCXI 1520 module, the virtual channels, and the wiring properly configured (several years experience with this device). I'm using an old E series DAQ card AI-16XE-50, with the 50 pin cable that plugs in the back of the SCXI chassis. I noticed I had two bent pins with the cable connector module that plugs into the SCXI backplane.  I was able to straighten them, so the cable connects properly, but I suspect the bent pin incident caused electrical circuit damage. Any suggestions on trouble shooting? None of the three 1520 modules I have will output an excitation voltage for a quarter bridge.

    Sorry that I don't have an answer for you tyea, but I'm interested in your thread because I have a similar issue with a 1520. My excitation votltage, as measured with a DVM, is always 1V. I've tried 0V, 1V, 5V --- it's always 1V, on Full or Quarter bridge. I'm using a similar DAQ to yours - a PCI 16XE-10 (and a PCI-6030E on antother system).
    I don't have a lot of experience with these modules. This could be a wiring or programmatic thing I'm doing wrong.
    Richard

Maybe you are looking for