Setup will not run

Ipad 3. IOS 7.0.4. Everytime I open setup it closes immediately. Tried full reset three times. No luck. Can't erase and restore as Find My Phone is on and need to turn it off to erase and restore via backup. Have to use setup to turn off Find My Phone first.
Help!!!!
Kerry Kissinger
<Email Edited by Host>

Erase the device in iCloud.com using a computer or another iOS device. You can restore form a backup after you erase the device and activate it again.
iCloud: Erase your device - Support - Apple

Similar Messages

Itunes 7.7 setup will not run - gives message 'Invalid drive: E:\'

Hi there guys,
really hope someone can help.
As stated on the subject line, after I have downloaded itunes 7.7 (either from the itunes site or through itunes update checker), when I attempt to run the setup, it gives the message 'Invalid drive: E:\'. It then says itunes installer completed, that errors were encountered and to try again later.
Any suggestions?
thanks,
paul

Still trying to solve this with no luck. It's getting really frustrating - if anyone has any ideas....!?

I installed the setup, BUT the setup will not run

ok so i went to the apple website and downloaded the installation wizard from the website. i have windows xp and have Symantec Client Firewall which is disabled. the installation shortcut then shows up on my desktop but when i open installation wizard, this is the message i get:
Command line parameters:
/L language ID
/S Hide intialization dialog. For silent mode use: /S
/v/qn.
/V parameters to MsiExec.exe
/UA<url to InstMsiA.exe>
/UW<url to InstMsiW.exe>
/UM<url to msi package>
and then there's an OK button at the bottem of the window and when it is pressed, the window disappears and no installation setup starts.
so what does it mean? and how do i fix it?!
thanks erin

I got ride of the smart build and simplified it by just animating each photo separately but the same thing happened.

Forms 6i setup.exe will not run

I am trying to uninstall Forms 6i from a PC (Windows XP) and the manual recommends doing it via the installer.
However the installer (setup.exe) will not run. No error message, control just returns after double click.
I am pretty sure this was how we originally installed Forms 6i but for some reason it does not run now.
Tried a couple of things like turning DEP off, to no effect.
Anybody has an idea where the problem is?
Or should I just uninstall the hard way by deleting the folders and cleaning up the registry manually

Hai,
In The Properties of the setup file, there is a Tab Named Compatibility. In that tick the Run this program in compatibility mode for:
and select the latest Operating system listed in the Combo box. (Eg: Windows 2000).
and Press OK.
then it will work.
Regards,
Manu.
If this answer is helpful or correct, please mark it. Thanks.

Have a month number but QaaWs query will not run

If I type in the parameters for the query it runs with no problem, but when I use the MONTH function that returns the month number the query will not run.
I think the date serial number is what is being passed even though I see a number being display. Does anyone know how to conver this MONTH() function to a true number? This is a converted 4.5 model that works just fine, but looks like they tightened things up in 2008.
Thanks...
Tom Nather

Here is how its setup. I have a QaaWs query that returns the max date, then Excel functions that calculate the date back 13 months. One of the functions is MONTH() that returns the month number based on a date stored in a cell, not really a true number.
I added a vlookup that takes the month from a date field (05/31/2008) and looks up the appropriate NUMBER of the month =VLOOKUP(MONTH(K47),M54:M65,1). Find 5 (which is defined as a number.
This then is applied to the input side for the Qaaws (Month Number = double) using a Paste Link function from the CONTROLS sheet in excel, and the query then works.
Anything that is a date always seems to be built off of the date serial number so this was the easiest way to get this to work.
I think standards have been tightened up using the Flex language vs. what 4.5 was written in, this works in 4.5 without the necessary conversion.

System Will not run at FSB166

Ok, well after playing with several configurations i am still no further forward on my little CPU FSB Saga.
So this is what i have found out so far and maybe someone can shed some light.
I have a Barton 2800+ CPU, if i run this CPU at its correct FSB of 166 my system is very unstable. 3dMark03 Will lock during the CPU test and if i use Prime95 my PC will lock within 30 Seconds. Grrrrrrr, ( Lots of profanity )
So i clocked my CPU to 133FSB, now its just an XP2200, well thats what it says anyway.
However no more lock ups. 3dMark03 runs through without a problem, Prime95 runs for hours without an error.
So i decided to try something else, in my other PC i have an XP2000+ FSB133 CPU running on an MSI KT3 Ultra Board. This PC works like a dream.
I took the CPU out of there and put it in to my K7N2 Delta Board and setup the FSB as 133 ( Correct for the CPU )
And what happened, well it started to lock up again.
So i clocked the FSB down to 100 and now this CPU works fine in the delta board with no Lock ups.
So has anyone got any idea why my cpu's will not run at there correct FSB on this board.
My 2800+ will run at 133FSB and not 166FSB
My 2000+ will run at 100FSB and not 133FSB
I know that the CPU must be ok because upon returning the XP2000+ back to the KT3 Ultra Board i have it works fine without a problem with 3dmark03 and Prime95.
Its only when it is in my K7N2 Delta board running at the correct FSB.
Your thoughts on this are much appreciated.

Quote
Originally posted by JCLogix
Well its unbelievable i know but i finally have a working system.
Up on the advice of the guy at MSI Technical Support in the USA i took my K7N2 Delta board back and got a brand new one. Rebuilt and re-installed my system and my god it worked. I am now running my Barton 2800+ at the correct FSB of 166 and now the correct speed. Prime95 and 3d Mark03 run without a problem.
On my old board Prime95 would lock my system in less than 30 seconds, its been running for 6 hours now without error. The CPU test in 3dmark 03 would lock everytime and now i\'ve run it thirty times and it goes through everytime.
So yes i guess my motherboard was just screwed.
However i have noticed some difference between my first K7N2 board and my new one. These may mean nothing, thoughts on these would be good.
Old Board came with Bios 7.0 on it.
New board has Bios 7.2
Old board Manual was red colour and Raid Manual was Blue
New Board Manual was orange colour and Raid was Green
Old Board had no sticker on South Bridge
New Board had a FSB400 Green Sticker on South Bridge.
Plus i have noticed that the voltages and temperatures on my new board are much more stable than before. Less jumping up and down.
Everything else i think was the same.
I know they are minor and may mean nothing, it was the sticker that i found interesting. Why did my first board not have that. Why suddenly put it on ?
Anyway, one new board later and my barton 2800+ is now running stable, so i\'m happy and i guess this proves the boards can work with them.
A special thanks to wonkanoby, your help in this issue was most appreciated. You certainly did make me think about a few things. I have of course mad sure i have re-fitted my heatsink right =) even put some nice as3 on it.
Anyway, i\'m not sure what to suggest to you guys still having problems. Does your south bridge have a sticker on it? Maybe they have a new version of the board out, i don\'t know. Comments People? does anyone know anything.
Well this draws my story to a close.
Good luck to everyone else, hope you get your systems running.
Laters
JC
Congratulations... I'm glad that it worked out for you.
But what you are telling me seems that MSI put a new release of the board on the market with a lot of bugfixes in it :( .
But this means that i have to get 2 boards back to the shop and claim 2 new boards. But the problem is that i have to drive about 3 hours and have to pay because i have the boards for a month now. This is in my eyes unacceptable. I'm going to write MSI and ask them if the have another idea to help me out. But i'm glad that we know what the problem is and i give you a lot of pleasure with the machine. ) ) ) )
Greetings
BoyOne

Using Vista operating system Firefox Version 3.05 tried to update to new version but after download it goes to run then my only option is save the file it will not run the file.

the firefox set 7.01 up file can be downloaded but will not run do I have to update to 4 the 5 up to 7?
download run setup
unable too run setup everytime

The longer this thread continues, the more ancillary comments you throw in that aren't directly pertinent to your problem with your DVR software not working with Firefox 4.0. Sorry, I don't intend to continue with this discussion.
I do agree that ''something'' needs to be done better with regards to plugins for Firefox, but I do disagree with you as to whose responsibility that ''something'' is.

I uninstalled Firefox once, reinstalled it and it ran. I had a problem so I did it again. Now it will not run and I get an error message saying that firefox is running and you can only run one at a time. I can't figure out what is running.

Because of a problem, I uninstalled Firefox once, reinstalled it and it ran. I had a problem so I uninstalled/reinstalled it again. Now it will not run. I get an error message saying that firefox is running and you can only run one at a time. I have uninstalled multiple times and can't figure out what is running. The is only one Firefox installed and it is not open. What does this mean and how do I fix it?

If you use ZoneAlarm Extreme Security then try to disable Virtualization.
*http://kb.mozillazine.org/Browser_will_not_start_up#XULRunner_error_after_an_update
See also:
*[[/questions/880050]]

Downloaded safari 6.0.4 but it will not run on 10.6.8 on

I downloaded safair 6.0.4 to a macbook running 10.6.8 but Safari will not run the new verstion, only the 5.9.1??

For 10.6.8 you need Safari 5.1.10.
Ideally, you'd now install a system backup made before you got 6.0.4 on there... if that's not possible, download Safari 5.1.10 for Snow Leopard & use Pacifist to 'force' the install, then restart. Backup first, if you haven't already.

Firefox will not run after System restore or running in compatibility mode for windows 98. How do I fix this? I already tried all other solutions on this site.

I was running Firefox fine just yesterday. I screwed up the registry a litle while removing an installed program completely, so I restored the system and everything appeared to work fine. I then decided to play an old video game, Return to Krondor, which was made back in 1998, so I ran the program with no other programs running in compatibility for windows 98. After finishing the game, I closed it and put the computer in hibernation mode. I come back today and firefox will not run at all. It is not running in the background and there are no programs running. There are no services running which could interfere with it. I think somehow Firefox may think I'm in compatibility mode still, but I have no idea.
I'm running windows Vista 32 - bit with an AMD 2.4ghz processor, 4gb ram on an Emachine computer. I have already tried system restore, restart, processes etc. Nothing works. I can still run Internet explorer and all other programs.

The person that I was assisting, has Windows 7 which has 64 bit system. Her browser was IE 10.
Was IE11 ever offered (or installed) via Windows Update?
Is her computer currently fully-patched at Windows Update?
Is Adobe Shockwave Player v12.1 (or higher) installed on her computer?
Is Adobe Flash Player v15.0.0.189 (or higher) installed on her computer?
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Troubleshoot Shockwave Player installation for Windows
http://kb2.adobe.com/cps/403/kb403264.html
You will find support for Shockwave Player in this forum:
http://forums.adobe.com/community/webplayers/webplayers_shockwave
~Robear Dyer (PA Bear) MS MVP-Windows Client since 2002 Disclaimer: MS MVPs neither represent nor work for Microsoft

Office 2013 applications will not run as a domain users

I have a windows 7 64-bit pc with 2013 office home and and business installed. When trying to access Office as a domain user the programs will not run. Is there a fix for this other than making the users local admins?

Hi,
Which version of Office 2013 did you deployed, Windows Installer-based version or the Click-to-Run version?
Did you install the Office product with local administrator account? I notice that the users must be local administrators on their computers to install Office:
http://technet.microsoft.com/en-us/library/ee624360.aspx
If we add the local admin right to the user, can the Office programs be launched? If so, repair the Office programs and then remove the local admin right. See if it can work.
Best regards,
Rex Zhang
TechNet Community Support

I recently purchased the iPhone 5 and my itunes account on my iMac 7,1 will not recognize it as a device. My imac has stopped downloading new updates, it says it is up to date with iTunes 9.2.1. My imac will not run the newest 10.7 itunes either. HELP!!

I recently purchased the iPhone 5 and my itunes account on my iMac 7,1 will not recognize it as a device. My imac has stopped downloading new updates, it says it is up to date with iTunes 9.2.1. My imac will not run the newest 10.7 itunes either. All I want to do is put my music from itunes on my computer to my new phone. HELP please!!

i called apple and they are sending me snow leopard so i should, *fingers crossed, be able to run the newer version of itunes. we'll find out for sure in a few days when it arrives

ITunes 10 will not run on Windows 7, 64 bit

I have upgraded to itunes 10 and now it will not run. In task manager the process is running but no programme. i uninstalled all itunes, quick step, bonjour and apple folders. Then tried a clean instal of itunes 10. Still didn't work. Uninstalled again and reloaded v 9.2 and it works. Tried disabling bonjour and ran the instal of 10 again and it still doesn't work. This is becoming a major pain as I am stuck on v9.2.

Try installing the version 10 again so we can check on a few other characteristics of the problem, seeoh.
(1) Does your QuickTime Player launch, or do you get an error message of some kind when you try to launch that?
(2) Try (by way of experiment) disabling the BonJour Service.
In your Start Menu, right-click Computer and select "Manage".
Expand "Services & Applications".
Open "Services". (Maximise the window to better see what's going on.)
Right-click the BonJour Service and select "Properties". In the "General" tab, set Start-up type to "Disabled".
Restart the PC, and try launching iTunes again. Does it launch this time?

HT1925 After failed update of itunes yesterday, now will not run with error message "MSVCR80.dll can't be found, APSDaemon.exe not running". Windows 7.

After failed update of itunes yesterday, now will not run with error message "MSVCR80.dll not found" APSDaemon.exe will not run. itunes will not now run.

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

Premiere Elements 12 will not run after installing on my HP laptop with Windows 7.

Premiere Elements 12 will not run after installing on my HP laptop with Windows 7. HOWEVER, PE11, PE10 & PE 9 all run without a problem. I contacted HP, and there are NO NEW or ADDITIONAL video drivers available from HP.
I have NEVER had a problem running ANY software on this laptop -- except for PREMIERE ELEMENTS 12!

Premiere Elements 12 will not run after installing on my HP laptop with Windows 7. HOWEVER, PE11, PE10 & PE 9 all run without a problem. I contacted HP, and there are NO NEW or ADDITIONAL video drivers available from HP.
I have NEVER had a problem running ANY software on this laptop -- except for PREMIERE ELEMENTS 12!

Setup will not run

Similar Messages

Maybe you are looking for