Setup with linux

How to I start-up my newly purchased IPAD2 if I have no Windows or Mac system? We're a Linux house, this is our first Apple product. I expected it to be like most systems and startup and be usable when powered on.

The update due tis fall will be more self sufficient, with online backup options an no need to connect to a computer to get it working. I suggest you take it to an Apple store. There should be a representative there that will be happy to help you go through the initial setup. They did this for me and I didn't have to ask for this service or pay extra for it either. Once you have it set up, you should be OK until this fall when you will need to take it back to an Apple store to get the iOS 5 update. You can alternatively find a friend running Windows or OSX. Once you have the update, all future updates will be directly to the iPad and delta updates.

Similar Messages

How do you setup GNU/Linux on an iMac G4 with Panther OS X 10.3.9 ?...

How do you setup GNU/Linux on an iMac apple computer
http://en.wikipedia.org/wiki/IMac_G4
with Panther OS X 10.3.9
http://en.wikipedia.org/wiki/OSX10.3 ?...

There is a Ubuntu 10.4 version for Mac with PPC architecture; not sure
how that would work in the computer you may consider running it in.
Some leads on that kind of discussion can be found by using a Google
search, and the words: *ubuntu for PPC G4 Mac* + read through results.
Or choose to search using these terms: *Open Source Linux PPC G4 Mac*
A few results point back to Apple Discussions, where there were inquiries.
Note the version of a Linux-type of OS, compatible with Mac PPC hardware,
on the following page-link: *• Ubuntu 10.0.4 LTS (Lucid Lynx)*
http://cdimage.ubuntu.com/ports/releases/10.04/release/
{You would have to put the image, as downloaded from such a site, on a CD
for use as an Installer; then follow any instructions as available to install it.}
An old page (from 2007?) with some details, some not up-to-date,
may be of help to a limited degree, from here: Ubuntu PPC wiki
https://wiki.ubuntu.com/PowerPCFAQ#Is%20Ubuntu%20supported%20on%20PowerPC?
Or: https://wiki.ubuntu.com/PowerPCFAQ
See their home page to look for other information on the site: https://wiki.ubuntu.com/
These wiki groups are like communities, with rules & other such considerations; you
may be able to also find +Open Source+ sites with information and builds of suitable
Linux versions capable of running well in an older PPC Mac. There are newer ones
that would have no problem on a newer Intel-based Mac, of course.
• Mac Linux Links: (perhaps too dated)
http://lowendmac.com/linux/index.shtml
• Comparison of Linux distributions:
http://en.wikipedia.org/wiki/Comparisonof_Linuxdistributions
Hardware support in the older PPC G4 Mac computer should be considered, in order
to have the better experience possible with the Linux-based OS; and some specs in
an old Mac may not be ideal. The graphics processor unit and amount of dedicated
RAM for the graphics alone, could make a difference; depending on what you had in
mind when running a Linux-based OS in a PPC Mac. So consider hardware specs.
Some hardware in the computer may or may not be supported by the Software; and
then, there may be some problems implementing a Linux OS version in your Mac.
If you had an old Mac Mini (PPC or early Intel) & considered running Linux, there's
a page of general ideas worth a peek: http://sowerbutts.com/linux-mac-mini/
You may not have enough room on the existing internal hard disk drive inside the
iMac G4, for a complete OS X 10.3.9 or Later OS X, and a partition for Linux in it.
And, you may find through reading further, if you need to (or don't) start fresh and
have a partition for each different OS, or not. For organizational purposes and ease
of removing one system or the other, a partitioned hard disk drive may be best.
There probably is a way to have Linux on an external bootable hard disk drive; &
that would have to be compatible with the Mac hardware requirements to be seen
and used by the computer, and also the ability to restart from Linux into Mac OS X
would have to exist in the system software. Hopefully without incident.
You will have some degree of a learning curve in this matter, from reading up on
the details of any viable Linux versions, through the ones likely to work in your
old PPC G4 Mac, and then if there are more than two or three good ones, of those
what one would be most likely to be worth the additional effort to attempt to use in it.
Depending on the version and specifications of your iMac G4 computer, there could
be different versions of linux systems capable of running it. However, some items
may not be supported which you would need to have working, such as wi-fi internet
and sleep mode, etc; among others. Searching the net does bring up more info.
{You may find, that going to OS X 10.4.11 would be more worth the effort, in that
most everything would 'just work' and you can still find many good software bits
and some fine freeware or low cost shareware to run on it. Linux versions vary
so much on what they can and cannot do, I would not recommend running it.}
Since I am not an expert in the matter, hopefully someone with a experimental time
and results in a similar vintage Mac as yours will reply and give you insightful info.
Good luck & happy computing!

Anyone setup a DVR with linux?

found a package on sourceforge called DVR and wondered if anyone has tried it or has successfully setup a dvr at home with linux. want to get windows xp media center (i cant believe i actually typed those words!) but if there is an open source linux way, then i want to do that
need to know if the dvr package on sourceforge works and what type of video card was used. i know i need a tv tuner card and will probably get a hauppauge, but will that work with linux ir should i get an ati card
thanks for any input and/or advice

mdirolf wrote:just installed mythtv using the pkgbuilds in the AUR. so far everything is working pretty well, the install went more smoothly then i had anticipated after reading many mythtv horror stories. im using the hauppage pvr-150, which is working really well and is considerably cheaper than the other hauppage cards
The 150 is cheap becuse it has no hardware decoder - it's all done in software. I personally like the 250 myself, because it takes the processor strain down and allows you to use cheaper (and therefore quieter) processors.
If you're really planning on building a set-top box, I'd suggest:
· Two Hauppauge PVR-250s - so you can record one channel and watch live TV on another (i.e. rewind, pause, fast forward live TV as you watch) - it pays off.
· A motherboard that supports a Pentium M (yes, they do exist)
· A geforce MX 4000 series - onboard TV out, good card, no fan
· The slowest DVD/ROM you can find - the slower the better. It only takes a 1X to play a video DVD, but a 16X is going to spin up and sound like ass when you're watching Braveheart.
· The largest disks you can imagine. 1 hour of raw TV is huge.
· A seperate RF remote system - this is the complicated part and you can always use a wireless keyboard, but the RF remote is really cool
Now for the record, I have never done this, but I setup and messed with myth a bit. I *planned* a set-top box for a long time, then I got Dish Network and their 100 hour DVR was 5 cents more a month... so my pipe-dream died.... it'd still be cool though, but I can't implement alot of it on the Dish Network lines....

Dual monitor setup with seperate resolutions

hey guys!
i currentley run thye latest version of archlinux with the cinnamon desktop environment and an nvidia geforce 7300SE graphics card.
im running a dual monitor setup with one 27" 1920x1080 monitor and one 27" 1024X768 monitor
because they have the same physical size they line up perfectley but because the resolution is different programs/mouse cursor movement doesnt, is there any way (without changing the resolutions) to compensate this effect so that in the eyes of linux/cinnamon the monitors line up so that for example dragging a window goes seamlessley between the 2 monitors.
i HAVE found out the panning option in the nvidia x server settings, but that really isnt what i am looking for...
Last edited by RikSolo (2014-08-04 11:25:02)

A magnifier following the window down to the pixel, zooming to the exact size of 540 pixels the 384 pixels window could create an illusion of just that. It would be highly impractical however, not mention all the hacking time. Even if you would manage to get two screen with different sized icons, so that they match visually, the windows and fonts resizing on the fly, wmctrl might help with windows alone, no their themes (buttons, borders thickness etc.), you would still be left with a visually differently sized mouse cursor. Technically such a feat should be possible, but who is going to code it? Nvidia?
Last edited by emeres (2014-08-04 18:48:59)

Linksys E2000 router is incompatible with Linux?

Hi All, I have Cisco/Linksys E2000 router setup for home wireless network. I had been setup while ago and well working since then. Now the challenge: I need to know or to change the wireless guest network password. Linux support says it can be done ONLY using a local application, not the web interface. And only from Windows computer. In my situation, I have Linuxes, blackberry, players and other network equipment but no Microsoft software. I did not know that router doesn't work with Linux when I bought it. Had anybody resolved similar issue? Thanks Yu

Sorry the software is only supported on Windows or MAC. You will need this to administer the Guest network.

Is a dual monitor setup with 2graphic cards possible?

HI.
What i want to do is run Archlinux on my Desktop but i dont want to miss my second monitor.
I could use both monitor on my nvidia graphiccard but i want to use the energy saving features too (wich dont work with 2monitor on one card) therefore my windows setup is big monitor on nvidia and the smaller one on the intel onboard card.
They both get recognized by lspci but only the onboard cards isy being used (the onboard card is the first card on windows too).
So is it possible to get it to work? Id really want to use ARchlinux on my Desktop too but i dont want to use it with one screen or without energy saving?
Working compositing is a must, i want to use gnome3 wich is the only reason to swich to linux for the Desktop (arch is running on the laptop for ages^^) but i dont need to, Win7 is working flawlessly fine and i didnt have to pay for it (msdnaa).
Thanks in advance!

hy do you need to clock down your card?
Most gpu have a function that clocks down the card@idle and or desktop.
In my case thats down from 850mhz(560ti)to 200mhz while using windows and 50mhz if the gpu load is low.
Thats about 20watts less then with full clock.
The problem is, that the gpu wont clock down with 2monitors on it, it stays at 850mhz.
Theres some driver tweaks for amd cards wich "fix" thatfix this (i believe its intentionl, 2monitors equals more load but its no problem with new cards...
Thats one reason i use my onboard gpu for the second monitor, it works well with windows and also means that swiching off fullscreen (games) to the desktop works a lot better, the second monitor can play a movie while playing wich doesnt work with one gpu and fullscreen.
I really dont need that with Linux since i use it for work and multimedia only but the energy saving feature is nice if the pc is on 8hours and more wich is often the case.
Can you tell which one do you run? I'm going to buy one for dual-monitor setup, and I'm looking for something that will work for shure.
As said dual monitor on one gpu works, amd can do 3monitors while nvidia can do 2 at once, that means if u intend to use 3monitors some day with ur card u have to buy an amd card.
i took the nvidia because is can use it to render videos with cuda support (its not working with all tools yet but its getting better and if it works its a lot faster then my cpu rendering).
PS: Thats one hread about the power saviing with 2monitors:http://forums.nvidia.com/index.php?showtopic=197557
since my monitors dont share the same resolution it seems that theres no way to make it work .
Last edited by halfzware (2011-05-12 21:17:41)

CiscoSecure ACS 3.3 with Linux PAM?

Hi. We have two new console servers (not Cisco products) and I'm trying to authenticate using our TACACS+ servers. Per the documentation I have found, I have put the appropriate commands in the pam.conf file. I have the communciation unencrypted. The authentication and authorization work, but the accounting is not. I have captured the TACACS server replying with "cannot process accounting message". Has anybody gottem ACS 3.3 working with Linux-PAM?

I think you are a victim of the AD Aware as opposed to AD Integrated. CiscoSecure is AD Aware, it can use the AD database for Password authentication (a very simple implementation of single sign-on). But the local database is used for everything else. From my point of view this is a good thing.
If the AD Admin, Network Admin and Security officer are all the same person, then I agree with you.
From your message you seem to be using ACS to secure your Cisco devices (routers/switches), I would not want people who manage AD to be able to give network device access to anyone they choose. Nore do I trust AD admins to understand network security. Normally the network people are very small subset of IT organization, so this should not be a big problem. Also, the real component that you are using to secure the devices is TACACS+ (hopefully) or RADIUS because the devices are not AD Aware themselves.
If you need for every user that is in AD to be a user in ACS, there is import/export support for both for inital setup, after that it is up to you to keep the databases synchronized. You can do this with routine import/exports, but I advise against it.
If you are using ACS to manage a Dial or IPSec environment, I agree this is a pain, but do you really want everyone to be able to dial-in or VPN into your network without coming to you for access? Don't you want to be able to disable/expire peoples access for devices and remote access without calling the AD admin?
For the kind of things you want, you need an AD Integrated product like Exchange or you can try some of the vendors at listed at http://www.microsoft.com/windows2000/partners/adall.asp
FYI - This is my understanding of the product, I'm sure there are a lot of people out there that know more then me, so feel free to correct me.

T42 wifi with linux...

hi,
am installing debian 5.0 linux on t42s. usually i get them from ebay with the wifi cards already installed and it is no trouble at all to refit the machine with debian. however i recently obtained a t42 with no wifi card so i got one (by intel) from ebay and installed it myself. i am pretty sure that it is physicaly installed okay because when i boot to the xp-professional startup screen the little wifi icon lights up. i have not gone through the xp setup though. the wifi icon did not light before i put the new wifi adapter in.
i am trying to set this machine up as a duel boot of xp and debian. usually i install debian via net install. with my other t42s this process via wifi has been beautiful and it worked just right.
however when i try to do a net install of debian using the new wifi adapter on this machine the installer says that it cannot configure the dhcp using the wifi (but it can if i plug it into ether net cable).
is there something else i should do to logicaly install the wifi so the debian installer can recognize it? like use the access ibm button for example?
or is there simply no linux driver for this intel wifi adapter? i would think that there is a linux driver for any intel product however i could be mistaken. wfi with linux is somewhat tricky.
perhaps if i use ether net for the install i can obtain the linux wifi driver afterward.
otherwise what is the oem wifi adapter for the t42?
please advise.
Solved!
Go to Solution.

FRU = Field Replaceable Unit, one of the ways IBM (and now Lenovo) catalogues its part numbers.
The FRU that you've provided belongs to Intel 2100B card, and I'm very surprised that it doesn't work.
You got me confused with the model number for T42, since all 2373-4TU were shipped with no wireless cards, but as "wireless upgradeable"...it seems like you've provided the model number from the "troubled" machine twice, please check and verify...
I don't know Debian at all, but see no reason why the card wouldn't work. It's been around for 5-6 years and all the distros I've ever tried had drivers for it, no questions asked.
Screws and screw covers are easily located on eBay.
Hope this helps.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

Comparison of Installing HCM and Campus Solution 9.0 with Linux and Windows

Folks,
Hello. I am installing HCM and Campus Solution 9.0 Revision 5 with PeopleTools 8.53.
PeopleSoft Internet Architecture is WebLogic11g/Tuxedo11g/OracleDatabase11g with OS Oracle Linux 5.10.
In the process of seting up its database instance named "HRCS90" using /opt/PT8.53/setup/PsMpDbInstall/setup.sh, there is a step as below:
Database Create Type:
1) Demo
2) System
3) PeopleTools System
Either select Demo or System, the next step "select PeopleSoft Applications" has only one item:
1) PeopleSoft HRCS Demo Database - US English.
When set up "HRCS90" with SQL Server 2005 and Windows Server 2003, there is one more item: PeopleSoft HRCS Database - US English.
I don't need Demo database. I need HRCS database only because Demo database occupies much more disk space.
The document "PeopleSoft Human Capital Management and Campus Solutions 9.0 Revision 5 Installation Guide" does not state the detailed process to set up HRCS database instance.
I cannot find other PeopleSoft documents regarding set up HRCS database instance.
My questions are:
First, how much more disk space does "HRCS Demo database" occupy than "HRCS database" ? Is there "HRCS database" for Linux and Oracle Database ?
Second, can you find PeopleSoft document regarding the process of seting up HRCS 9.0 database instance with Linux and Oracle Database ?
Thanks.

It could come from how you installed the software itself (options checked). Have a look to that thread, it could help.
Nicolas.

HT204053 I have an iPhone 4S and the new Apple TV, both setup with my email as the Apple ID. I gave my wife an iPad 3 and set it up using her email address as the Apple ID. Is a second iTumes Match subscription required for her to use our music from iCl

I have an iPhone 4S and the latest Apple TV, both setup with my email address as the Apple ID. I subscribed to iTunes Match so our music could be played from iCloud. I gave my wife an iPad 3 and set it up using her email address as the Apple ID. When I try to turn on iMatch so she can play our music from iCloud on her new iPad it tells me that she needs a subscription to iTunes Match. Is it Apple's intent that we would need two iTunes Match subscriptions? If not, how do I accomplish what I want to get done?

The problem is that all services are bundled with your Apple ID ([email protected]):
Your iCloud account (Mail, Contacts, Calendars, Reminders, Notes, Backups, etc.),
also iTunes & App Store purchases (Music, Movies, TV Shows, etc.),
and the iTunes Match services.
(I guess that all your devices - yours and your wife's are connected to one iTunes library, right?)
If you want that your wife gets her own iCloud account for Mail, Contacts, Calendars, etc. but gets also access to your media then you have two set up two things on her device:
iCloud (Settings > iCloud) with her account (e.g. [email protected])
and
iTunes & App Stores (Settings > iTunes & App Stores) with your account (e.g. [email protected]).
In this case she gets access to your library and could use the same iTunes Match account.
(See also: Using one Apple ID for iCloud and a different Apple ID for Store Purchases http://support.apple.com/kb/HT4895)

Install PT8.53 with Linux Issue: Jolt client (ip address 192.168.196.102) does not have proper application password

Folks,
Hello.
I am installing PeopleTools 8.53 with Oracle Database Server 11gR1 and OS Oracle Linux 5.10.
Data Mover Bootstrap and Application Designer can log into Database instance successfully. My procedure to run PIA is below:
Step 1: start Oracle Database Server and LISTENR is listening.
Step 2: start Application Server ./psadmin and 8 processes are started.
Step 3: start WebLogic Server PIA /opt/PT8.53/webserv/PT853/bin/startPIA.sh
In Browser, http://192.168.196.102:8000/ps/signon.html comes up successfully. But when sign in using UserID PSADMIN and password "myname", I get the error message in Browser as below:
The application server is down at this time.
CHECK APPSERVER LOGS. THE SITE BOOTED WITH INTERNAL DEFAULT SETTINGS, BECAUSE OF: bea.jolt.ServiceException: Invalid Session
We've detected that your operating system is not supported by this website. For best results, use one of the following operating systems:
Mac OS X 10.6(Snow Leopard)
Mac OS X 10.5(Leopard)
iPad
Oracle Linux Enterprise
Mac OS X 10.4(Tiger)
Windows 8
Windows 7
Mac OS X 10.7(Lion)
Regarding Application Designer, both Database Type "Oracle" and Connection Type "Application Server", UserID "PSADMIN" and password "myname" login successfully. I view TUXLOG (current Tuxedo log file) and its last screen is below:
191723.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191723.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191723.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191724.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191724.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191724.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191724.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191724.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191725.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191725.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191725.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191726.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191726.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191726.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191726.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191726.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191727.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191727.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191727.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191727.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
I View APPSRV_1023.LOG (current server log file) and its content is below:
PSADMIN.32259 (0) [2013-10-23T18:55:12.134](0) Begin boot attempt on domain PT853
PSAPPSRV.32290 (0) [2013-10-23T18:55:35.701](0) PeopleTools Release 8.53 (Linux) starting. Tuxedo server is APPSRV(99)/1
PSAPPSRV.32290 (0) [2013-10-23T18:55:35.923](0) Cache Directory being used: /home/user/psft/pt/8.53/appserv/PT853/CACHE/PSAPPSRV_1/
PSAPPSRV.32290 (0) [2013-10-23T18:56:19.256](2) App server host time skew is DB+00:00:00 (ORACLE PT853)
PSAPPSRV.32290 (0) [2013-10-23T18:56:23.504](0) Server started
PSAPPSRV.32290 (0) [2013-10-23T18:56:23.507](3) Detected time zone is EDT
PSAPPSRV.32338 (0) [2013-10-23T18:56:25.793](0) PeopleTools Release 8.53 (Linux) starting. Tuxedo server is APPSRV(99)/2
PSAPPSRV.32338 (0) [2013-10-23T18:56:26.003](0) Cache Directory being used: /home/user/psft/pt/8.53/appserv/PT853/CACHE/PSAPPSRV_2/
PSAPPSRV.32338 (0) [2013-10-23T18:57:08.871](2) App server host time skew is DB+00:00:00 (ORACLE PT853)
PSAPPSRV.32338 (0) [2013-10-23T18:57:10.662](0) Server started
PSAPPSRV.32338 (0) [2013-10-23T18:57:10.663](3) Detected time zone is EDT
PSSAMSRV.32388 (0) [2013-10-23T18:57:12.159](2) Min instance is set to 1. To avoid loss of service, configure Min instance to atleast 2.
PSSAMSRV.32388 (0) [2013-10-23T18:57:12.168](0) PeopleTools Release 8.53 (Li nux) starting. Tuxedo server is APPSRV(99)/100
PSSAMSRV.32388 (0) [2013-10-23T18:57:12.265](0) Cache Directory being used: /home/user/psft/pt/8.53/appserv/PT853/CACHE/PSSAMSRV_100/
PSSAMSRV.32388 (0) [2013-10-23T18:57:59.414](0) Server started
PSSAMSRV.32388 (0) [2013-10-23T18:57:59.416](3) Detected time zone is EDT
PSADMIN.32259 (0) [2013-10-23T18:58:48.149](0) End boot attempt on domain PT853
PSAPPSRV.32290 (1) [2013-10-23T18:59:06.144 GetCertificate](3) Returning context. ID=PSADMIN, Lang=ENG, UStreamId=185906140_32290.1, Token=PT_LOCAL/2013-10-23-11.59.26.248432/PSADMIN/ENG/vSz0ix+wq8d+zPRwQ0Wa4hcek0Q=
~
I think the error is indicated in TUXLOG file "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password". The application password "myname" in Browser http://192.168.196.102:8000/ps/signon.html page is not working. I use the same password "myname" to login Data Mover Bootstrap mode, Application Designer, and Application Server psadmin configuration successfully. I have tried a few other passwords in Browser http://192.168.196.102:8000/ps/signon.html page but not working.
My question is:
How to solve Sign In issue on http://192.168.196.102:8000/ps/signon.html that is "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password" ?
Thanks.

Dear Nicolas,
Hello. I have used the same password for "DomainConnectPswd" in the file Configuration.properties with that for Application Server setting. Eventually, UserID PSADMIN sign in http://192.168.196.102:8000/ps/signon.html successfully. PeopleTools 8.53 runs correctly in Browser.
It seems that whether upgrade Oracle Linux 5.0 to the latest 5.10 does not have effect !
I am very grateful to your great help for this installation of PT8.53 with Linux and Oracle Database !

How can we achive active/active cluster setup with Oracle

Hi Experts,
How can we achieve active/active database setup with oracle WITHOUT USING RAC.. As far as I know it's impossible (unless I'm wrong)..
We are using Oracle 11.2.0.1 64bit on Windows 2008 server. We deployed Oracle FailSafe but that's more of an active/passive solution based on a windows cluster.
The other solution we were thinking about is to use DataGuard and replication.. two servers.. the oracle instance running on one server generating logs, and the other server receive the logs and apply them to the physical standby db.. Still, this is not a real active/active setup.
So, is it possible to run 2 servers in an active/active cluster and have the oracle database in an active/active setup or have the instance running on multiple nodes (at the same time)?
Thanks

Let me give you a brief explanation of what the situation is and you can be the judge..
My client have four databases with the smallest one being 20GB and the biggest around the 35gb (SGA 750mb to 1.4gb (Tiny by DB standards) and probably on a normal day, you can run all four of them on a decent desktop).. The DBs are used to keep track of people information. Through out the year, the databases are almost sitting idle, and by idle I mean, the odd update here and there, the odd report..etc. No hard real processing of any sort. Two days of the year (end of year) we have all the operators consolidating records and what's not and they will be pounding away entering data and updating the tables - with hourly reports that goes to 3rd parties. The client expects a 99.99 up time and availability during those 2 days.
Now, tell me, How can I justify using RAC and spending hundreds of thousands of dollars in licensing and what ever extra costs introduced by the complexity of the environment for the above scenario knowing that I don't have any real use for RAC for 363 days of the year; and we MIGHT need it for 2 days of the year? This is the dilemma we're facing.
Thanks
Edited by: rsar001 on Sep 3, 2010 9:42 AM

My apple id account is setup with my dads cell phone number, so on my iMessages on my mac i get my dads texts messages, is there anyway to change it so my phone number is the one receiving messages on my mac?

My apple id account is setup with my dads cell phone number, so on my iMessages on my mac i get my dads texts messages, is there anyway to change it so my phone number is the one receiving messages on my mac?

Remove his phone number from your AppleID.
http://appleid.apple.com

HT4137 iCloud setup with one Apple ID and multiple devices

iCloud setup with one Apple ID and multiple devices

What, exactly, are you trying to do? You can use the same iCloud account on as many devices as you want, as long as you don't turn on iTunes Match. Once you turn on Match, you're limited to 10 devices total.
Is this what you want to do...same iCloud account, but different iTunes/App store accounts on each device? If so, you can do that also.

We have a IPad setup with my ID, now we have I phones what if I use the same IDs? Or can I create a new one and use both on the iPad?

We have a I pad setup with my Apple ID, we have just got I phones today, can I create a different ID for my my wives phone and can she then sign into the IPad?

Stuartied wrote:
How do I sign out of the I Pad for for my wife to sign in?
Mac App Store: Sign in and out
http://support.apple.com/kb/PH11499?viewlocale=en_US
 Cheers, Tom

Setup with linux

Similar Messages

Maybe you are looking for