Setup with Static IP from ISP, need help

I'm trying to setup my WRT54G to act as my main router on my home network.  Currently, I use it as an access point behind my Sonicwall Tele3, but want to remove the Tele3 entirely because it's limited to 5 IP addresses going through it.  The trick is, I get a static IP from my ISP. 
My Tele3 works fine and plays nice with my DSL router.  The Tele3 settings include a "WAN Gateway (Router)" address of x.x.x.49 and a "WAN IP (NAT Public)" address of x.x.x.50.  The tele3 then has a local IP address of 192.168.1.1, and so on.  What I'm struggling with is how to setup my WRT54G to act as the main router.  I've tried a Static IP setup in the "Basic Networking" section of the linksys admin console, but no matter what I try, I can't get out to the Internet.
Thanks in advance for your advice.

In order to setup a static WAN (Internet) IP address on your WRT54G, you will need the following info from your ISP:
Internet IP address
Subnet Mask
Gateway
and at least one DNS address
Additionally, some users have been told that they have a "Static" Internet address, when in fact they have a PPPoE connection, and their ISP is simply giving them the same IP address each time they connect.  Please clarify with your ISP whether or not you have this.  If you have it, you will need your PPPoE
User Name, and
Password
from your ISP.
Hope this helps.
Message Edited by toomanydonuts on 02-26-2008 01:52 AM

Similar Messages

  • How do you overlap PDF's and finish with one PDF file? Need help ASAP

    how do you overlap PDF's and finish with one PDF file?
    Need help ASAP

    I'm not sure if you can do that with CreatePDF.  Try it; you got one free use when you sign up with Acrobat.com
    If not, you will have to use Adobe Acrobat; there is a full-use 30 days trial.

  • I just bought my MacBook Pro 13" and I tried to install an anti virus but then it went into a grey folder with a question mark I need help with restoring the iOS please

    I need help taking out the grey folder with the question mark and I've try everything except the CD thing because my MacBook didn't come with one so I really need help please

    What anti-virus software did you install? Although there's a lot of bad anti-virus software out there, no anti-virus software should cause such a problem. A gray screen with a flashing question mark on a folder means that no bootable system could be found, which means that the system was badly damaged or corrupt. Even installing bad software would not normally cause that, so either there was something badly wrong with the system already or the anti-virus software you tried to install was really, really bad!
    As mende1 says, you need to reinstall the system at this point. After your system is back up and running, read my Mac Malware Guide. If, after reading that, you want anti-virus software, use one of the programms recommended in that guide.

  • I Have An Iphone 4s And When I Listen To Music With My HeadPhones I Cant Lower The Volmume of The Music Beacuse Then It Will Have No Sound I Can Only Listen To The Music With The Volume Loud I Need Help What Can I Do ?

    I Have An Iphone 4s And When I Listen To Music With My HeadPhones I Cant Lower The Volmume of The Music Beacuse Then It Will Have No Sound I Can Only Listen To The Music With The Volume Loud I Need Help What Can I Do ?

    Hi Yendy14,
    Welcome to the Support Communities!
    The article below may be able to help you with this.
    Click on the link to see more details and screenshots. 
    Troubleshooting iPhone, iPad, and iPod touch accessories
    http://support.apple.com/kb/TS2634
    Cheers,
    - Judy

  • E4200 static ip from ISP help...

    Hi, all.
    I have an E4200 that used to work properly with our ISP until we had to perform a reset.  It lost all of its settings, of course and now we're just trying to get it back online.
    The info provided from our ISP is as follows:
    Network ip address
    Gateway
    Subnet
    Usable Range
    DNS1
    DNS2
    I entered the above info. into the network setup fields (with the exception of the usable range ip addresses since there were no fields for that), saved, and rebooted the router.  It still will not work properly.  I can't get past the router and in the Cisco quick utility on my phone, for instance, shows no ip address provided from the ISP.
    Any ideas?  Is there some setting I overlooked?
    Thanks for the help!

    Hi there! Are those settings for the router configuration or for your computer? If those are for the router, this article from Linksys is helpful  : http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=91dbbf0c772e48b9bebee106abb837c9_3979.xml&pid=80&r...

  • 'Easy Set-up' Option - Problem with edit canvas/windows - really need help!

    Hello Everyone. . .
    Have a problem that i really need help with, i have tried so many different things to sort this - but with no sucess.
    I usually work in High Definition and i have recently done a small project for someone in DV. When changing to work in DV, i selected the DV setup from the 'Easy Setup' menu. I have now changed back to HD and there are a few things different with Final Cut that i can't shift!
    When i move a clip from the capture bin into the edit window, the clip no longer fills that window like it always used to and there are lines at the top and the bottom of the clip - almost like it is in widescreen.
    Editing like this wasn't too much of a problem, but when i came to compress and do a final render of the whole film - there was the same black lines on the top and bottom of the film.
    I can't figure out how to get the setting back to how they were, and have the clips fill the edit windows and fix the end render/compress.
    Any ideas from anyone on what i am experiancing with all this? And. . . how to fix this problem?
    Any help on all this will be very much appreciated!

    Hello Everyone. . .
    Have a problem that i really need help with, i have tried so many different things to sort this - but with no sucess.
    I usually work in High Definition and i have recently done a small project for someone in DV. When changing to work in DV, i selected the DV setup from the 'Easy Setup' menu. I have now changed back to HD and there are a few things different with Final Cut that i can't shift!
    When i move a clip from the capture bin into the edit window, the clip no longer fills that window like it always used to and there are lines at the top and the bottom of the clip - almost like it is in widescreen.
    Editing like this wasn't too much of a problem, but when i came to compress and do a final render of the whole film - there was the same black lines on the top and bottom of the film.
    I can't figure out how to get the setting back to how they were, and have the clips fill the edit windows and fix the end render/compress.
    Any ideas from anyone on what i am experiancing with all this? And. . . how to fix this problem?
    Any help on all this will be very much appreciated!

  • I have a godaddy website with a welcome page- I need help adding a few additional pages with a hyperlink to my welcome page.

    I need help attaching a few hyperlinks my godaddy welcome page. I have 2 more ipages articles, I also converted them to pdf. Godaddy only helped (last year) with the 1st article.  I do not know how to attach a hyperlink to the artlcles and add the hyperlinks to my welcome page.

    The program is called Pages not iPages. Just let us know if you do not speak English and what language you do speak so we can adjust for that.
    The issues are to do with your web page not with Pages.
    I think you are asking how to link from your web page to your pdf articles. You must first copy those pdfs to your web server, or some other web location, and then provide html links on your welcome page to those pdf files.
    The pdfs themselves may contain links to other locations but I can not see that that is what you are asking for.
    Nor to what those links would be to.
    From your heading I think you may have confused the name of Pages, the word processing program, with web pages which are two different things.
    Peter

  • Uploading from iPhone - need help

    When I attempt to upload a photo from my iPhone to my Web Gallery, I get the following error message on the iPhone:
    "None of your .Mac accounts have been configured for posting from mobile devices. You must first enable this feature on the .Mac website"
    Any idea how I "enable this feature" as I can't seem to find it anywhere on my .Mac homepage or account info, etc.
    Thanks.

    It's STILL driving me nuts.
    Why can't Apple just make it 'Apple-like?' Where is a set of instructions on how to do this?
    This is a new far-out concept they're adding here, I want to use it like a Flickr set amongst my iPhone totin' friends, so we can all just send some fun photos up in the cloud, and look at it. This is clearly something we all seem to need help with for the set-up...
    AND YET...
    Simple question that my iPhone prompts me to ask: Where do I tell my .Mac account that I want my Web Gallery to work with my iPhone?
    No sign of it on my 'homepage' on .mac, no explaination in iPhoto 08 prefs or help, no explaination ANYWHERE. Searching is NOT helpful - very poor 'help' page on this topic.
    It's not working for me, and I had this button activated on my iPhone yesterday, and an iPhoto Web Gallery for the last 4 hours...
    It's just not very clear, Apple. Get it together, please. The only mention of this on my .mac "logged-in" screen is on a descriptive ad for iLife 08 and .Mac.
    Well, give me the respect of noticing I've already bought it all.

  • Final Step away from Windoze (Need help) [easily SOLVED]

    Hi all,
    I am preparing to take my final step away from windows OS, as the more I learn about Linux, the more I detest the majority of my hard drive being dedicated to a monopolus (if that's a word), closed monster. However there is one thing that I need, Starcraft and TF2 (team fortress 2). In an i686 installation this would be very easy... install wine. This will not work, as I am posting in Arch64, you must have guessed that I have a 64 bit system.
    I know there are ways to get WINE working on Arch64, outlined here
    http://wiki.winehq.org/WineOn64bit
    I was wondering whether you guys had any better ideas, so that I don't have to stuff my lean mean 64bit machine with 32bit libs
    Thanks for the help.
    Last edited by MattSmith (2009-04-02 07:41:33)

    hmm...
    Look at the wine homepage and see what they say. They usually have some really good pointers, per game. Just search the AppDB for the game you wanna play. simple as that!
    You can also probably find something about FAM there. (I use gamin and it works fine)
    Also know that if you and some friends sometimes put up LANs to play against eachother that can be cumbersome with a linux computer, due to the fact that normal home networks don't have ddns on their dhcp network. That sure have messed up things for me a couple of times. Windows has some default programs that kinda solves that, but it has failed for me aswell from time to time.
    Dunno if there's more reasons yet why home networks sometimes fucks up since i'm still kinda in the proccess of learning. Just wanted to save you some trouble and let you know that having a windows partition (on say 20-30gb) can be a neat backup sometimes.

  • I got my mac from granddaughter.need help to change admin password

    i just got my mac from granddaughter. i need help to change the admin password. she has no clue what i am talking about when i ask for the password. please help me. i can't even install my tiger replacement cd until i change the admin password. thanks for your help. lee

    Hi, Lee. Welcome to Apple Support Communities.
    From this Apple Knowledge Base article:
    Start up from a Mac OS X Install disc (one whose version is closest to the version of Mac OS X installed).  Usually, you can start from the disc by putting it in your computer, restarting, and holding the C key. Or, put it in the computer and click the Install or Restore icon you see in the disc's main window (after which the computer will start from the disc without you needing to hold C). Or, you can use Startup Manager or the Startup Disk preference pane to select the Install disc.
    Choose a language, click the arrow button to continue,
    Mac OS X v10.6 or later: Choose Password Reset from the Utilities menu.
    Mac OS X v10.5 or v10.4: Choose Reset Password from the Utilities menu.
    Mac OS X v10.3: Choose Reset Password from the Installer menu.
    Tip: If you don't see this menu or menu choice, you're probably not started from the disc yet.
    Note: The default keyboard layout is U.S. English while started from the installation disc. If you use a keyboard layout other than U.S English, use the Input menu (the flag icon on the right side of the menu bar) to select the desired layout before typing a new password.
    Select your Mac OS X hard disk volume.
    Select the user name of your original administrator account.
    Important: Do not select "System Administrator (root)". This is actually the root user. You should not confuse it with a normal administrator account.

  • Installation of Photoshop update 13.1.2 for creative cloud fails with error code U44M1P7 I need help

    I need help installing update 13.1.2 for Photoshop creative cloud, installation fails with error code: U44M1P7. Could someone please help?

    Sorry to bother you.
    I could find the answer after searching previous posts about this language problem.
    Had to change my language in AAM profile and then download PS CS6 again ( english version ).
    Then open the actual Photoshop and in preferences > interface you can besides the Dutch also option for English.
    restart application and Voila.
    Greetz, Jeroen

  • HT1386 i have an iphone 4s. Im getting the iphone 5s for christmas, but i do  not have my phone backed up, and my phone is not working and my screen is covered with blue lines. I need help.

    My iphone is not working, i was planning on getting the iphone 5s for christmas, but i do not have my phone backed up on itunes. On my screen are these blue lines across on my screen, and i cant see anthing and i do not know what to do. I want to back up my phone but i cant see my screen to back it up. I need help badly. Thanks apple hope you can help me in this matter.

    You wouldn't need to see the screen to backup unless you have a passcode on the device. Is that the case? You should be able to plug the device into the computer with iTunes and just select backup now.

  • How to register itunes with out credit card? need help

    i got mac but i don't have credit card what should i do to register with i tunes. can i link with paypal or debit card? need help cos i am new to mac thing cant use or download any stuff  since my itunes account is not fully active

    You can use an iTunes gift card to start an account. See the I do not have an iTunes Store account section of the How to redeem an iTunes Gift Card on a computer section of the following document:
    iTunes Store: How to redeem an iTunes Gift Card

  • Flashing folder with a question mark. NEED HELP!

    i opened my laptop today and it started making little noises and showed a folder wit ha question mark. I've read some posts and it seems like a hard drive crash...I have the apple care and i purchased my macbook in july of 2007. I was wondering does that cover the problem that i have right now?? NEED help!!

    Same thing happened to me the other day. In fact, it started making little popping noises, I installed the update 10.5.3, when it restarted I got the Folder with Question Mark. The drive was dead as a doornail. I could not get it to show up with disk utility. In fact, when I removed the drive, if I shook the drive you could hear the arm flopping around inside. I have heard reports of this happening to a lot of people. What brand and size drive did you have in your MacBook?
    I ordered a new 160gb 7200RPM drive and it will be here on the 5th. It is real easy to install the drive on these MacBooks. The original equipment hard drives are 5400RPM, so I should see some real snappy performance increases, plus a lot more storage space. Lost everything on the drive, but It was backed up.

  • MacBook white screen with apple at start up need help fast

    My MacBook is frozen at start screen it shows white screen with apple and won't go any further need help fast

    What version of Mac OS X are you using? Try restarting your computer safe mode (hold the shift key down while restaring) then run disk utility on you hard drive.  http://support.apple.com/kb/HT1782?viewlocale=en_US&locale=en_US

Maybe you are looking for