Setup wizard missing?

Allright i need to access my wireless key so i can setup my new laptop but i cant find to open my router info i usally had a icon on the task bar but now its missing..where the hell is it...any help will do
Thanks
Vic

Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave Username blank & in Password use admin in lower case...
Under the Wireless tab,Click on the subtab Wireless Security to check the security key.If you are using WEP security then,use Key1 as the Network/Security Key.

Similar Messages

  • Error installing new server cert with Certificate Setup Wizard

    Can anyone tell me why I'm getting the following error when I try to install a new server certificate:
    Unexpected Failure
    There was an error while writing certificate file.I'm using the Certificate Setup Wizard in Netscape Console 4.23 to try and replace an expired certificate used by our Messaging Server. The Messaging Server version is:
    iPlanet Messaging Server 5.2 Patch 2 (built Jul 14 2004)
    libimta.so 5.2 Patch 2 (built 19:30:12, Jul 14 2004)
    SunOS nodename 5.8 Generic_117350-20 sun4u sparc SUNW,Ultra-EnterpriseI tried changing the owner of the .db files in <serverroot>/alias from root to the id under which the messaging server runs, but it didn't help.
    Regards,
    Mike

    Jay,
    I've tried several permission settings for these file but nothing has worked. I opened them up (briefly) as much as:
    -rw-rw-rw-   1 mailsrvr nsgroup   204800 Mar 23 10:27 msg-auds930-cert7.db
    -rw-rw-rw-   1 mailsrvr nsgroup    32768 Mar 23 10:27 msg-auds930-key3.dbAnd, I've closed them down as much as:
    -rw-------   1 mailsrvr nsgroup   204800 Mar 23 10:27 msg-auds930-cert7.db
    -rw-------   1 mailsrvr nsgroup    32768 Mar 23 10:27 msg-auds930-key3.dbI have not been restarting anything between tries. Can you think of anything else that I'm missing?
    Regards,
    Mike

  • [SOLVED]Dropbox Setup Wizard won't start

    Hi I'm kind of a newbie to arch. I have only use arch for like 2 weeks. And this is my second Arch setup and last time it worked with a reboot.
    I have tried to setup dropbox om my system for a few days now. But i cant get it to work..
    I have followed the wiki and have read everything multiple times but noting works.
    After installing dropbox you should input this command:
    $ ~/.dropbox-dist/dropboxd
    I have also tried the commands: 
    $ dropboxd
    $ dropboxd &
    dropboxd --help
    But noting happens and i cant open the Setup Wizard.
    No error or anything, It just waiting or something.
    I have also tried to install an older version of dropbox by editing the PKGBUILD but noting work there ether.
    I have tried installing dropbox-cil but didn't get that to work ether. And this is the only thing I got:
    $ dropbox status
    Dropbox isn't running!
    $ dropbox start
    Dropbox isn't running!
    Dropbox is already running!
    $ dropbox stop
    Dropbox isn't running!
    I'm using arch with XFCE4 if that's to any help.
    I do not know what to do or if i missing something please help!
    Last edited by yoieh (2015-01-23 12:53:06)

    I have tried that but it but that did not work ether it just creates new dirs.
    The output from:
    $ pacman -Qi dropbox
    are in Swedish
    Namn : dropbox
    Version : 3.0.5-1
    Beskrivning : A free service that lets you bring your photos, docs, and videos
    anywhere and share them easily.
    Arkitektur : x86_64
    URL : http://www.dropbox.com
    Licenser : custom
    Grupper : Ingen
    Tillhandahåller : Ingen
    Beror på : libsm
    Frivilliga beroenden: ufw-extras: ufw rules for dropbox
    perl-file-mimeinfo: opening dropbox folder on some desktop
    environments
    Krävs av : dropbox-cli
    Frivillig för: Ingen
    Konflikt med : dropbox-experimental
    Ersätter : Ingen
    Installerad storlek: 120,24 MiB
    Paketerare : Unknown Packager
    Byggnadsdatum : ons 21 jan 2015 12:16:58
    Installationsdatum : ons 21 jan 2015 14:12:33
    Installationsorsak : Uttryckligt installerad
    Installationsscript : Nej
    Validerad av: Ingen
    Google Translate:
    Name: dropbox
    Version: 3.0.5-1
    DESCRIPTION: A free service that lets you bring your photos , documents and videos
    anywhere and share them easily.
    Architecture : x86_64
    URL http://www.dropbox.com
    Licenses: Custom
    Groups : No
    Provides : No
    Depends on : libsm
    Volunteers dependencies: ufw - extras : ufw rules for Dropbox
    perl - file - mimeinfo : open the Dropbox folder on certain desktop
    environments
    Required by : Dropbox - cli
    Optional for : None
    Conflict with : Dropbox - experimental
    Replaces : None
    Installed Size: 120.24 MiB
    Packagers : Unknown Pack
    Building Date : Wen January 21, 2015 12:16:58
    Installation date : Wen January 21, 2015 14:12:33
    Installation Cause: Express installed
    Installation Script : No
    Validated by : None
    Edit--------------------------------
    LANG=C
    Name : dropbox
    Version : 3.0.5-1
    Description : A free service that lets you bring your photos, docs, and videos
    anywhere and share them easily.
    Architecture : x86_64
    URL : http://www.dropbox.com
    Licenses : custom
    Groups : None
    Provides : None
    Depends On : libsm
    Optional Deps : ufw-extras: ufw rules for dropbox
    perl-file-mimeinfo: opening dropbox folder on some desktop
    environments
    Required By : dropbox-cli
    Optional For : None
    Conflicts With : dropbox-experimental
    Replaces : None
    Installed Size : 120.24 MiB
    Packager : Unknown Packager
    Build Date : Wed Jan 21 12:16:58 2015
    Install Date : Wed Jan 21 14:12:33 2015
    Install Reason : Explicitly installed
    Install Script : No
    Validated By : None
    Last edited by yoieh (2015-01-21 22:22:07)

  • Email setup icon missing

    My Email setup icon missing and in setup wizard has 2 options:work email or skip email setup
    Solved!
    Go to Solution.

    Hi and welcome to the forums!
    Try these steps.
    KB10773 The Email Setup icon is missing from the BlackBerry smartphone
    Thanks,
    Bifocals
    Click Accept as Solution for posts that have solved your issue(s)!
    Be sure to click Like! for those who have helped you.
    Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

  • Windows Vista - iPod Nano charges, setup wizard will not start

    Help!
    I have a new PC, and it's Windows Vista.
    I have connected my iPod, and it has charged up, but the setup wizard has not come on?
    How do I save music to my iPod? My PC recognises it as an iPOD, and I can drag and drop things into it as though it is a storage device. However, my iPod does not recognise this music or photo's when I turn it on and try to play stuff? There are no instructions in the box. It's brand new from argos! Never had one before, so don't know what to do.
    Please help.
    Curlzy
    (Very fed up lady

    Sorry you are having problems.
    Could it possibly be any security related software that is preventing this ?
    * http://kb.mozillazine.org/Installing_Firefox#Windows
    Make sure that you have an official copy of Firefox. Do a clean install BUT make sure you do not use any offer to remove personal data or you will destroy bookmarks and settings. If you have problems try to give the exact error messages so paste them into your reply of attach screen shots.
    Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
    '''Note:''' You might want to print these steps or view them in another browser.
    #Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
    #After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
    #Delete the Firefox installation folder, which is located in one of these locations, by default:
    #'''Windows:'''
    #*C:\Program Files\Mozilla Firefox
    #*C:\Program Files (x86)\Mozilla Firefox
    #Now, go ahead and reinstall Firefox:
    ##Double-click the downloaded installation file and go through the steps of the installation wizard.
    ##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
    <b>WARNING:</b> Do not run Firefox's uninstaller or use a third party remover as part of this process, because that could permanently delete your Firefox data, including but not limited to, extensions, cache, cookies, bookmarks, personal settings and saved passwords. <u>These are difficult to recover unless they have been backed up to an external device!</u>
    Lets get Firefox installed then deal with any Java problem.
    * What is it that you need Java for ??
    <br /> see also http://kb.mozillazine.org/JavaScript_is_not_Java

  • Setup Wizard does not exist on my 8700v... where is it hidden?!

    I have bought a second hand BB, previously on vodafone, currently on O2.  The getting started guide assumes I can find the setup wizard instantly.  Not only does it not appear automatically it is not in settings or any other place I have looked.  The front convenience button does not do anything, so doesn't help either.  I haven't set up anything on the phone, other than the time and registering it on the wireless network... setup wizard is the first port of call but can't get to it.  Any ideas??

    Hi there,
    It is possible that the previous user removed it (there are ways to do this) and then simply wiped the device before passing it on to you.
    If you need it, you can reload the OS using the steps located here:
    http://supportforums.blackberry.com/t5/BlackBerry-Device-Software/How-To-Reload-Your-Operating-Syste...
    Or, you should be able to do everything without needing access to the Setup Wizard at all.  For example, all connection settings can be managed through Manage Connections app, keyboard settings and convenience key settings can be managed in the Options, and so on.
    If you want to reload the OS though, you can use the steps located in the above link.  The only catch is that you'll want to make sure you're using the OS for the original carrier (branded to Vodafone).
    I hope this info helps!
    If you want to thank someone for their comment, do so by clicking the Thumbs Up icon.
    If your issue is resolved, don't forget to click the Solution button on the resolution!

  • Error While running Setup Wizard in SolMan Managed Systems

    Hello,
    I am getting the error listed below while I am trying to setup an Agent in SolMan Diag.
    While I am running Setup Wizard, I am giving the message server port (50100) the same as I am getting from the systeminfo page: http://<My Server Name>:50100/sap/monitoring/SystemInfo.
    When I change this port with 50104 which is my P4 port, It takes it and then gives me a message that "P4 port is unknown".
    Any input?
    Regards,
    Ray
    Failure with Message Server
    An error occured while communicating with Message Server <My Server Name>:50100 through the host <My Server Name>: Error to retrieve the process from Message Server (detail: com.sap.bc.proj.jst
    artup.impl.JStartupClusterControlExceptionImpl: The message server did not respond within 60 sec. Please check if the message server is running and if the socket connection has been established.); nes
    ted exception is:
    com.sap.bc.proj.jstartup.impl.JStartupClusterControlExceptionImpl: The message server did not respond within 60 sec. Please check if the message server is running and if the socket connection has bee
    n established.(cause=com.sap.bc.proj.jstartup.impl.JStartupClusterControlExceptionImpl The message server did not respond within 60 sec. Please check if the message server is running and if the socket
    connection has been established.)
    Please check Message Server host/port, or enter the P4 ports in cluster table.

    Hi furious
    I have the same error , and finally I am find the solution, this error due to the enterprise admin permission, so go to main configuration tree (as shown on screenshot) click properties, click enterprise admin, click advance, again click enterprise
    admin, click edit and select "this object and all descendant object" on Applies to option (as per screenshot) and select full control
    after that you prepare your organization and It will works
    cheers....................

  • Error while running the diagnositc system setup wizard

    Hello All,
    When I am running the diagnstics setup wizard,I am getting the following warning for SSO.SMD is the SID for my solution manager system and it is ABAP+JAVA system:
    SSO Setup : both Java and Abap stacks are using a ticket certificate with identical DN : 'CN=SMD'
    SSO will not work with such add-in configurations. Please refer to Details below for manual actions to be taken, and run this setup step again.
    Step SSO Details
    Either the Java ticket certificate or the Abap ticket certificate of the managing system (ABAP Host=localhost sys=01 client=200) must be deleted and re-created, using a Subject DN other than 'CN=SMD'
    For ABAP stack : please use transaction STRUSTSSO2 to delete the system PSE, and recreate the PSE Own Certificate with a different name (NB : this will destroy any existing SSO Setup on ABAP side)Or, for Java stack : please refer to SAP Note 701205, section 'J2EE', third bullet and note attachments (ReplacingPublicKey.pdf) for doing it on Java stack
    Also I am getting an error:
    The upgrader doesnt run,it says the SMD upgrader will be run
    What does this mean
    Please help
    Rohit

    Thanks Jagan
    I have run upgrader as u mentioned here
    Just needed to confirm
    Well I will correct the SSO as u mentioned,Thanks
    Also I am getting an error for wily interscopy while I run the setup for managed system
    I will post that in a diferent post
    Thanks
    Rohit

  • WiFi Wireless Setup Wizard produces Blue Screen of Death on Officejet Pro 8600 Plus

    The wireless setup wizard on my Officejet Pro 8600 Plus is failing immediately after "scanning for networks". I get a blue screen of death with error message B8494B00, followed by "turn printer on and off" with flashing screen.
    I bought the printer about one month ago and it has worked perfectly so far. My Apple Time Capsule failed yesterday, so I bought a new one (latest model) and had to set up the wireless network again. When I tried to do so on the printer, I got the error for the first time. Nothing else had changed. Other devices are working with no problems on the new network. The computer is an Apple iMac running OS Mountain Lion. 
    I have tried turning the printer on and off, disconnecting the power and reconnecting, then turning it on again, but no result. I have restored the wireless to factory settings, but no difference. 
    Please help. 

    Right off I have to tell you I do not "speak Mac".
    I assume the "Apple Time Capsule" is a name for a network router?  A syncing device?
    Unless I am mistaken:
    You do not need the Wizard to set up the network -- it is pretty software for an HP PC; when it works, it can make things easier.  The setup Wizard is not necessary for the process.  I should think this is true for the Mac.
    ==================================================​===================================
    If you cannot get someone from the Printing group to answer your specific concern,
    you may have succes with the following:
    The User Guide has pretty good detail on how to set up the networking necessary to get the printer connected to either a PC or Mac environment.  Assuming you can get the printer to "Reset network settings" (User Guide, page 222), then you can re-enter the information you require manually.  It is a bit tedious, but is may work better than fighting the Wizard.
    OfficeJet Pro 8600 User Guide
    You may be able to circumvent sone or all of this by reinstalling the Full Feature Software for your printer -- that assumes you are first able to "reset network settings", at least, and get a printout test page to verify that the reset actually worked.
    Select your printer from HP Office Jet 8600 series
    Mac – By Garland_M
    HP Wireless Printer Setup (Tutorial Video)
    Mac
    YouTube Search - HP printer install for mac
    Good Luck!
    <<<   Click on the White Kudos Star on the Left to say Thanks!
    Clicking “Accept as Solution" helps others find this fix for a same or similar issue   >>>
    2013 Year of the Snake!
    Kind Regards,
    Dragon-Fur

  • HT2305 My iPod is not being read by iTunes. What do I do to be able to sync my iPod if iTunes is not starting the setup wizard for the iPod when it is connected to a Dell PC? I am new the iTunes and iPods.

    My iPod is not being read by iTunes. What do I do to be able to sync my iPod if iTunes is not starting the setup wizard for the iPod when it is connected to a Dell PC? I am new the iTunes and iPods.

    Hello, BAHannebaum.
    The article below should resolve any device not being recognized in iTunes issue that you are experiencing.  The most common issues are the Apple Mobile Device Support driver or iTunes is outdated.  Start with the first step and test the results after each step processed. 
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Cheers,
    Jason H. 

  • HP Photosmart 5520 Wireless Setup Wizard Hangs, USB fails to install

    Hello,
    I bought a HP Photosmart 5520 4 weeks ago. I installed it and setup a wireless connection. It worked for 1 week without flaws.
    After a holiday my HP PS5520 printer lost its wireless connection to the network. I restarted the printer, still no wireless connection. all other devices like iPhones work OK on the wireless network. Tried to run the Wireless Setup Wizard again but the routine hangs (the spinner stops) when searching for routers and no networks are displayed, it hangs. Only a powercord detach can/will hard-restart the printer. After starting the printer, the printer complains that I should us the power butten, but that does not work when it hangs at the wireless setup wizard.
    I tried this routine several times, but the printer hangs every time when searching for routers... Tried manual, reset factory defaults, reset network defaults etc... Wireless is simply impossible to use since it can not be setup.
    So I tried to use the USB port directly attached to my PC. Since the wireless driver was installed, I connected the printer to the PC with USB but then it was marked as a unrecognised device by Windows 7. I tried to add the HP driver manually but when selecting the CD (inf), Windows tells me that the service stoppen (-10)...
    So I installed the software from the CD which pointed me to the online version of the software which I installed. After selecting the USB radiobutton, it tells me to connect the HP PS 5520 which I did, but the HP install window failes to detect that the printer is plugged into the USB port and the printer is installed by Windows as an unknown device.
    I uninstalled the 'unknown device' and tried again, wthout luck. Tried another USB port, Windows installed it again as an unknown device and the HP software failes to pick it up. So after googling I deleted all HP software from my computer (Intel I7 - 8 GB), uninstalled the unknown USB device from windows, rebooted several times, deleted all HP folders and cleaned all temp-folders (I am an IT professional!).
    So, I installed the software again but when the HPO software asks me to attach the USB cable, Windows again installed the 5520 as an unbknown device and the HP software again failes to see that the printer is attached to the PC. 
    Tomorrow I will buy a new printer but since this HP 5520 is only 4 weeks old, I really want to knwo how I can fix
    1 The issue that the HP printer hangs when searching for routers / wireless networks
    2 Windows/HP software to find the HP 5520 through USB 
    I guess nobody will have an answer since Google does not give any help. This post is merely to expose my frustration that HP makes fine printers but failes to deliver issue-free software... I always have issues when setting up HP printers somehow...
    Of coarse I hope that somebody has a clue..... Good night!
    Regards
    Marc Verkade
    Curacao

    I have had my 5520 for a couple of years, when intermittently it has dropped off the wireless network, and I have had to reinstall the network. Now it does it every time I switch it on - it has lost the network and password. This is very irritating...

  • 2 problems: 1st unopened messages, 2nd cannot add personal email in setup wizard

    Hi guys, I'm having a problem with my device. It seems like I cannot add a personal email adress in my email setup (from the setup wizard) When I enter this setup wizard > email setup the following appears: email setup select an email setup option [ ] I want to use a work email account with a Blackberry Enterprise Server AND THATS THE ONLY OPTION I CAN PICK! (a friend of mine with the same device could add a personal email) from there I can only choose { close } or { next } what is happening, can someone explain what I can do to add my personal adress? ------------------ Another thing I find quite strange is the fact that on my desktop the icon "unopened message count" appears. When I open the BB-menu, there should be a little star in the message-icon right? Well it isn't there! (the litte white-on-red star) So this icon tells me that I have unopened messages, but I can't find them anywhere.. guys please help!!!

    Hi and Welcome to the Forums!
    Your first problem is carrier related -- you must have the proper data plan from your carrier (at whatever costs they charge) to enable enhanced BB functions like email. A generic data plan is not usually sufficient -- some call the required plan The BlackBerry Data Plan. But call your carrier and ask them what you need from them in order to have access to their BlackBerry Internet Services (which include personal email).
    Your second problem I am not understanding. What "BB-menu" are you accessing? Where exactly is the star you are seeing? Where exactly is the star you are expecting to see? More and clearer details, please.
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • In setup wizard it says "Your computer must be restarted to complete a previous uninstall. Do you want to reboot now?" after uninstalling old version and trying to install new. I CAN NOT run ANY version now......HELP

    I had an old version of Firefox and uninstalled it. Then I installed the 5.0 version. BUT, in the setup wizard it says "Your computer must be restarted to complete a previous uninstall of Firefox. Do you want to reboot now?" I choose "YES" and the computer reboots, but when I run the setup wizard again, it says the same thing. I have reinstalled it 8 times, and it says the same thing......I have searched my computer for it, and can't find what it's talking about!! HELP!!!!!!

    Cor-el:
    Thanks so much for your help, it is very much appreciated.

  • 5800 Email setup wizard use data connection withou...

    While setting up my email account on 5800xm through Messaging>Options>Settings>Email, the email setup wizard automatically opens. After defining the email address and password, the wizard automatically attempt to connect through 3g data connection to retrieve the email settings. Why is there no options to choose which connection to retrieve the email account settings?
     Does anyone expereince the same problem? How can i change this? 
    was: 3310--> N80 v5.0719.0.2--> N82 v31.0.016; now: 5800xm v40
    KeN82Ny

    It seems to have worked on my 5800 Xpress.  To decode the advice, two icons regarding the email setup were on my screen, one for email and one for email set up.  The email set up was in pink.  I pressed the white button to get the Organise, went in , selected the pink email set up icon and Removed it.  Now both icons are gone.  We will see tomorrow morning if I get the annoying message again asking me to go on the network.  Think it is sorted. I suspect that accidentaly starting the proceedure keeps it hanging around in the background.

  • I have a wireless 3050a. the wireless is setup but the setup wizard keeps telling me to reinstall?

    Good morning
    I have installed the drivers for my wireless printer model number 3050A and my wireless recognises the device however every time I start up the setup wizard for wireless comes up insisting I need to setup the wireless. How can I get rid of this or rather what is the issue here?
    Thanks for your help,
    Cato

    OK, that is a good thing to want.  What operating system?  What router?  What error messages have you gotten?  Has it ever worked?
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

Maybe you are looking for