Setup won't detect the router

Every time i run setup(on both my PCs), it won't recognzie the router. I have all the cables hooked up correctly,and even my USB adapter on my other PC is on the network. The problem is that one cannot access the internet. The router i bought is legal,i purchased it at Wal-Mart. Can someone here help me?

As you are using USB adapter on VISTA Operating System…..try to download the updated drivers ( If available) on http://linksys.com/vista ….. remove the older drivers from programs & features in control panel….check if it works or not.

Similar Messages

Won't detect the router.

Hi,
I am trying to install a WRT54G model router. It goes through the setup and all the lights and everything else is correct but when the software tries to detect the router it always says the is cannot detect it. I am able to access the router with 192.168.1.1 so the cables work, but i don' t know what to do at that stage. My computer is running XP if this is an issue. I have no experience with networks. This is my first time installing a router
Thanks

ISP?
•if you're running cable ISP go to MAC ADDRESS clone on the blue tab click enable and click clone your pc's mac - don't forget to save settings
•if you wanna personalize wireless settings go to wireless creat your own network name
•if you want a secured wireless network go to wireless security subtab on the blue bar - i suggest WEP encryption
•then last thing go to status tab and check if you have internet ip address , if yes power cycle modem and router for 1 minute check internet connection after
•if DSL who's the ISP? what's that brand of the modem?

WRT54GS Can not detect the router

We lost the internet connection a few days ago for a couple of hours and since then had to reset the modem and when I try to set up the router with the Easy Link Advisor I get can not detect the router. I am using the router to access the internet and it can't be detected???
I have powered it off enough times and then some and need to get this running to use the laptops.
I am running ver 7 firmware that it came with but I don't know what the exact version I am running or gor that matter where to find it.
Thanks

okay went through the firmware upgrade and installed it through 192.168.1.1 to admin tab and upgrade. it got to the reboot part and hung there for a bit, i hit continue or what ever it said and came back upwith a dns error and page unreachable. version installed is what i downloaded 7.50.5. i am still having the same problem, all the lights are lit that are suppossed to be lit, and i am on the internet and running through the router, and when i go into easylink advisor and start the setup process i have to go through the entire thing including selecting the router (which it should know what router it is) though removing the power cord and waiting and still told that it can not detect the router. i have no idea where to go from here. thanks!

I have a PowerBook G4 with a non-functioning monitor. It used to work with an external monitor, but I reinstalled the OS, which cleared the display preferences and now when I restart it won't detect the external monitor. How do I fix?

I have a PowerBook G4 with a non-functioning monitor. It used to work with an external monitor, but I reinstalled the OS, which cleared the display preferences and now when I restart it won't detect the external monitor. This means I can't use the computer anymore. How do I fix? I tried using the Command+F2 keyboard shortcut, but it doesnt' work. It's possible that since I reinstalled the OS, it still needs to be set up, so there's only a welcome screen (but since I can't see it I'm not sure).

There is no limit to the number of times you can re-install Office on the same computer.
You can activate by telephone:
The last paragraph is the relevant bit

Computer won't detect WRT54G router

I got the WRT54G router. I plugged the router into the power source, then i plugged the the cable from the modem to the router, then the cable from the computer to the router. All four lights were lit. Then the computer would never detect the router. I tried plugging in and out, and the same problem. All the cable were in the right places. I'm guessing it has to do with my computer itself rather than the router. I have Windows XP

okay...first off check the physical connection, make sure that computer is connected directly to the no. 1 or no. 2 ethernet port of the router...click on start >> run >> cmd >> type ipconfig and hit enter, find out the IP address and try pinging to default gateway...if you are getting any replies, let me know the ISP details, so that i can tell you step by step configuration of the router...

"Setup did not detect the required components. Setup will exit." !?!?!?

I have a retail Audigy 2. Autoupdate recognizes my card and gives me the available list of drivers and applications for download. I download the following:
) Audigy 2 Drivers
2) Audio Console
3) EAX Console
4) Speaker Settings
5) Surround Mixer
The ) Drivers and the 2) Audio console installs just fine. However, for each of the three remaining programs (3, 4, & 5 listed above) upon executing the downloaded file they all give me a pop-up window that says:
?Setup did not detect the required components. Setup will exit.
This happens with all three of them. I want to install these because I am of the understanding that one of these contains the ?Speaker channel test? (for lack of a better word) that will test if my speakers are hooked up correctly to the right channels. The ) drivers, and 2) Audio console do not have that test. I created another post concerning this but nobody has replied:
http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=39825
I also tried unzipping the three executable files with WinRAR, and then executing the Setup.exe files but it yields the same results.
Anyone know why I can't install these applications?!?!?!?!
I swear, I have never had so many problems with a particular brand of product than I have with Creative products?.yet I keep buying them anyway?.sheesh?.Message Edited by Bridgeboy on -30-2005 05:0 PM

nanite2000 wrote:
superidan wrote:
I have retail Audigy 2 card. tryed removing the card and installing on a differant slot. Nothing Works! it produces the same "no audigy 2 card found - setuip will now exit" Creative sould be ashamed thanks
Yes, Creative should be ashamed.
This is a known problem that has been around for months and they have failed to address, just like many other problems with their soundcards. For the solution to this particular problem, look here:
http://forums.creative.com/creativel....id=3964#M3964
If you would reread my original post in this thread, that solution did not work for this particular problem of mine. I have a SoundBlaster Li've! Card that this solution worked for, however it does not work of the Audigy 2 card?unzipping the files with WinRar and then running the Setup.exe files produces the same result?setup does not recognize the required components and will close.
I?m not saying that the person who you quoted should not try it though.

I have a MacBookPro with Yosemite and Safari won't recognize the router after sleep unless I restart the computer.

I have a MacBookPro with Yosemite and Safari won't recognize the router after sleep unless I restart the computer.
OS X 10.10.1.
Safari Version 8.0 (10600.1.25.1)
WiFi router connects with mail but not Safari

See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Featurs appin the Window Control Panel. Then reinstall all the Apple software components
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
- Try on another computer to help determine if computer or iPod problem

IPod no longer detect the router and can't connect to internet

Hey guys, i'm new in the community and thought that you may can help me with a lil' problem.
I bought my iPod one month ago and at first successfully connected to internet, then download the iOS 4.3 and continued working well for a few days 'till it just stop connecting to the web. I searched everywhere and found some things that helped but not solved my problem.
I have all my network data, the IP, Subnet Mask and DNS, the only one that does NOT work is the Router. I even tried putting the numbers myself by Static, but it didn't work.
Can somebody help me or tell me what da **** is goin' on?
By the way, my Internet service is Prodigy Infinitum ('cause i'm Mexican).
Thanks(:

Try:
- Resetting your iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Powering off and then back on your router
- On the iPod reset netwokr settings: Settings>General>Reset>Reset Network Settings
- The troubleshooting here:
iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections

Migration won't detect the iMAC..

Hello,
I see a lot of people are having problems once they have selected the files to migrate however I'm not even getting that far. Any ideas as to where am going wrong? I have a Dell Laptop (XP SP 3) and I want to move everything onto my spanking new MacbookPro (purchased today). The Migration assistant in the laptop (which doesn't open automatically after it's been downloaded BTW) opens and says it's waiting for the connection to the Mac, the progress scrolls but it finds nothing.. The Mac however sees the comp and gives me a code but the laptop doesn't ever get that far... They're on the same network (otherwise the mac wouldn't even see the comp right? and I've tried putting an ethernet connection between the two but still no progress)...
So, what should I do? (no technical jargon please :-))
Very frustrated..
Thank you!

Please read and follow the directions in Lion Setup Assistant tips. Because you have already started the iMac and used it I would recommend starting from "Second chance...."
Also I'm guessing you may be new to OS X. If that is correct I would recommend book marking and using:
Switch 101
Mac 101
Find Out How Video tutorials
Finally remember you have 90 days of free telephone support from Apple using the complimentary AppleCare service. You can locate the phone number in your manual or you can use the AppleCare Contact Info link.

Why can't I sync my facebook invitations to my iCal? My Mac Mail won't detect the date/time on the email anymore.

I have been trying to sync my facebook invitations to my iCal and no longer able to do this through my Mac Mail. When I would receive a facebook invitaiton through my comcast email, I used to be able to hover my mouse over the date/time of the invitation and then I could easily "Add to iCal" or "See Date in iCal", but am no longer able to do so. I can still add other invitations, just not the facebook invitations. Any ideas?

You can get your photos off your phone. If they are all in Camera Roll just import them to your new computer (http://support.apple.com/kb/HT4083). If some of them were synced to your iphone from your computer (i.e., in photo library) just use an app like PhotoSync and send them to your new computer wirelessly. For that matter, you can sync your phone with your new computer without losing your data and settings if you carefully follow this guide: https://discussions.apple.com/docs/DOC-3141. Your only issue will be non-purchased music on your phone which is not in your new iTunes library, which will require 3rd party software such as Touch Copy to transfer from your phone to iTunes (or you will have to rip you CDs again to import them).

My iPhone displays as available in my PC, but my PC won't detect the photos on it. How can I fix this?

See title

A couple of other possibilities:
The CD is dirty / damaged / suffering from "CD Rot" - sometimes CDs may seem to play fine on a CD player (or using the CD-player function of a PC) but will not transfer correctly to a computer - this is the result of the way that CD players auto-correct the datastream from the CD where PCs, when reading the audio CD as data, do not.
Enabling the error correction function in iTunes import may alleviate if not fully resolve this
Use an alternate tool to extract the audio from the CD - Exact Audio Copy is probably the best out there, as it can be configured to attempt multiple reads of every audio sample on a CD to get a consistent result. Then import the resulting files into iTunes.
You don't say whether this is specific to one CD as in the original poster's case, but the "crackling" symptom has affected a significant number of users of the 64-bit version of iTunes 12.1.0.71 - these are mostly addressed in the most recent update (12.1.1.4), but if nothing else works it may be worth trying this alternative installer: iTunes 12.1.1 for Windows (64-bit — for older video cards)

Any sulutions for audigy 2 issues(setup could not detect the card at my pc)

i've looked for so long for a propper solution but i did not find anything usefull.
first i've downloaded the drivers and try to install them with no success.
second, i tried with the original cd, again no success.
iv'e moved the card to a diffrent slot , still nothing, always the same info when trying to install.
iv'e looked some here but there are a lot of threads about audigy, it will take a couple of years to look into all of them
i'm using win xp, my p.c is kind of new( year old), gigabite dsl motherbord if it matters.
even tried before a long time to contact your support, its a shame for this company, no single answear from you(even the other time i tried to contact you about my speakers).
hope that someone here can give an idea/s what else i can do with this.
thanks in advance
p.s
creative support/management its about time to treat your custumers or close this company, you have a lot of issues and you have zero support, your loss...

Okay I ended up fixing this problem myself seeing as a lot of these forum topics just come to a dead end with no real resolution.
Let's get 'Creative' ...
I removed the reg entry hkey_local_machine/software/creative tech, removed all drivers, programs, and anything that even smelt faintly of creative.
Just to make sure I ran the CTZAPXX.exe on the cd and removed drivers again there also.
Then upon a swift reboot I used CTZAPXX.exe to install the drivers, ran the cd, unchecking the option at the bottom of the 'custom' install list to install windows drivers (as it had already been done)
Now I'm back in business
Though, all through the ages I've never had a creative soundcard, which hasn't given me trouble at some stage, man I even have shameful memories of my AWE64... Lift your game creative, you've got a great product line, just a pity the shoddy drivers sometimes let them down.
This post may be a little outdated, but it's really intended for all you googlers out there I really hope this fixes your problem!

Computer won't detect router

I have a wrt150N with windows xp and road runner internet. all the lights work but install cd and easy link setup won't detect the device. I can use Internet explorer to get onto the net but itunes and avant browser won't work. I changed my router address to 192.168.2.1 but it still won't detect the device. have tried the online chat without sucess. ready to throw this out the window. any help would be greatly appreciated.

Upgrading the Linksys Router's Firmware Question How do I upgrade the Linksys Router’s firmware?
Answer The new firmware adds numerous functions to the router. To setup a Linksys router with a DSL connection you need to perform four steps:
1. Downloading the Firmware
2. Upgrading the Router’s Firmware
3. Completing the Firmware Upgrade
4. Completing the Firmware Upgrade Process
Downloading the Firmware
Step 1:
Before downloading the firmware, make sure your computer has an active Internet connection. If your computer is plugged directly into the router and cannot get online, disconnect your router and plug your computer directly into your cable or DSL modem.
Step 2:
To go to the Linksys download page, click here and verify the model and version number of your Linksys product. For instructions, click the link How to find Model number.
Step 3:
After obtaining the model number of the Linksys router, enter the model number in the Enter Model Number field, then click GO.
Step 4:
Look for Locate Version Number and select the version of the Linksys product from the drop-down menu.
NOTE: In this example, we used WRT54G v.6. The Image may vary depending on the model number of the Linksys product.
Step 5:
After selecting the version, scroll down and look for Downloads For The WRT54G then click Firmware to get the latest firmware.
Step 6:
If you are using Windows XP Service Pack 2 (SP2) and Internet Explorer, you may see a “Pop-up blocked” message in your browser Information Bar. Click the bar and select Temporarily Allow Pop-ups and click Firmware again.
Step 7:
Click Save in the File Download dialog box that appears. Look for the Save As dialog box, choose a location for the file like the Desktop and click Save. When the download is complete, click Close, if prompted.
NOTE: The name of the file may vary depending on the firmware file of your router.
Step 8:
If the firmware file you have downloaded is on a zip format, double-click on the zip file and extract its contents to a single folder or to the Desktop.
NOTE: You will need to use a utility to open and extract files from the ZIP file archive. Popular software to use is WinZip®. To download WinZip®, visit http://www.winzip.com. You can also use the built-in unzipping features of Windows XP to unzip the contents from the archive.
Upgrading the Router’s Firmware
Step 1:
Access the router’s web-based setup page. For instructions, click here.
Step 2:
When the router’s web-based setup page appears, click Administration then Firmware Upgrade.
Step 3:
When the Upgrade Firmware opens, click Browse. Look for the .bin file which contains the files necessary to upgrade the router’s firmware.
NOTE: If the screen on your router’s web-based setup page looks different, click here.
Step 4:
Browse to the location where the firmware files were extracted and select the .bin file. When the file is selected, click Open.
Step 5:
Click .
Step 6:
When the upgrade is complete, the following message will appear.
Step 7:
Click .
Completing the Firmware Upgrade
Step 1:
Close Internet Explorer.
Step 2:
Reset the router. For instructions, click here.
Figure 1: Location of the Reset button of a Linksys BEFW11S4 router.
NOTE: If your router does not look like this, refer to the other images below:
Figure 2: Location of the Reset button of a Linksys WRT54GX router.
Figure 3: Location of the Reset button of a Linksys WRT54GC router.
NOTE: If the image of your router is different from the ones shown above, please consult your router documentation.
Completing the Firmware Upgrade Process
The firmware upgrade is now complete.
You can now use the router's Setup Wizard CD to configure your Internet service and set up your wireless connections.
Related Articles:
Checking the Linksys Router's Firmware
Setting-Up a Linksys Router with DSL Internet
Setting-Up a Linksys Router with Cable Internet
Setting-Up a Linksys Router with a Static IP Account
© 2006 Cisco Systems, Inc. All rights reserved.

WRT54GX2 setup won't recognize PPPoE

Hello, I have a computer (Windows XP) running DSL on PPPoE, no modem, the cable goes straight from the wall to the PC. I have a WRT54GX2 that usually works fine. However, installation of the router fails as of late.
I remember when I started the setup wizard, in the very first steps it would warn me that I was on a PPPoE connection. Installation would go fine and everything worked. Now, when using the setup wizard CD (and the updated version from this site) I don't get a window telling me I am on a PPPoE connection, and somehow I knew the installation would fail. Alas, it did.
So, I downloaded the EasyLink software and when running it I've got a windows telling me I was on a PPPoE connection. Installation went fine. Now I have to reinstall the router again, but I didn't get the PPPoE message when running the EasyLink setup. Installation failed, it won't detect the router. Anybody knows why is this happening?? Why won't the wizard recognize PPPoE?? Thanks.
Why is PPPoE connections so troublesome? argh!
Message Edited by Summitin on 06-11-2008 05:32 PM

Well try upgrading the firmware of the router & keep on holding tightly
the reset button in such a way that power light is blinking on the
router & then do a complete network power cycle i.e., unplug the power
cables from the modem & from the router & then plug in the power cable
to the modem first once all the lights are solid green you could plug
in the power cable to the router & then try setting up the DSL connection for the router & check out it will definately work!!

My MBP won't detect a projector even when I reboot the system.

I can connect to a monitor, so I know the adapter and cable are working, and my old HP will connect to the projector so I know it's not the projector, but my MBP will not even detect that a projector is connected.. I have tried multiple projectors as well. I am using a VGA cable with the apple adapter. I have read old threads, but there doesn't seem to be anything recent, and it seems like people were able to find the projector after restarting the system. I have tried all of the various displays sizes and colors; I have tried connecting the cables in various orders as one person said this worked for them, I have tried turning off the computer first, then connecting everything, I have tried connecting everything then restarting, but my computer just won't detect the projector(s). Any thoughts?

You can ignore those instructions. Adobe has what I believe is an easier way to install Flash by using the manual installers. See the Adobe troubleshooting guide - http://kb2.adobe.com/cps/191/tn_19166.html#main_ManualInstaller

Setup won't detect the router

Similar Messages

Maybe you are looking for