Setup Wont Run (Flash Perfesional CS3)

When i start Extractor (which i downloaded off thr Adobe
Site) for CS3 Flash Perfesional it exctracted the CS3 Flash
perfesional folder. I opened the folder it extracted and ran the
setup in it. When the setup is run it opens up a little windows
that disapears before i can see what it is and then nothing happens
The window sort of looks like a coping window but i cant
tell.
Iv checked taskmanager theres nothing in there that i cant
tell is related to the setup.
I have tried running in compatibility mode but that didnt
work either. I have tried running as an admin with no success
either.
Iv tried restarting the computer that didnt work. Extracting
to a different folder didnt work either.
System Specs:
Vista Home Prem 32Bit SP1
Intel Q6700 Quad Core 2.66Ghz
2Gb DDR2 Ram

Bump

Similar Messages

Driver cd setup wont run?

I have a new fx5600vtdr128 installed in a new computer, with a fresh install of win98, (asus a7n8x de luxe rev 2.0 + Athlon2600 barton core)
I tried it on my 2 other computers, the old one i was replacing did the same, the computer of my son did run but gave a fault when exiting.

mave,
What you mean by wont run ? then can you explore the cd ? if can just find the driver in the cd and install it.
Else , download at MSI website for the driver
Regards - Porsche -

Cs4 trial setup wont run

i don't know if this is the right place to post this but im having a problem installing the trial of photoshop cs4 extended. i have vista so when i click setup i right click and chose run as administrator. the window flashes then nothing happens but when i get to task manager it is running as a process.

What version of Vista and what hardware? have you considered just logging in as administrator instead of your normal user account?
Mylenium

Yoga 11s wont run Flash player

I just got the Yoga 11 S and while it claims that the systems has flash installed, whenever I open a program that utilizes it it will not run. I tried to downlaod adobe flash, but it keep stating its already on the computer. Any suggestions of how to get this up and running would be greatly appreciated. Thanks!

tested on different browsers?
*Non Lenovo employee*
I have a Y2P (i5) ... Feel free to ping me if you want me to test some applications with your Y2P if you have the same model. I don't mind keep doing recovery on it if needed .... =)

Help please, vista wont run flash player

I cant watch youtube videos, and a lot of other things on the
net, im going crazy here, I been looking in the forum, trying
different sollutions here and nothing of it is working for me,
Please, somebody help me, im no genius in computers, but
please help me

I guess i have the same problem that everybody else have,
I can´t play videos like youtube, ever since windows
updated something my computer went crazy, i tried all the solutions
in the forum, but im no genius, on youtube i get the message that i
either dont have the latest update or else its turned of, i tried
to install flash and nothing happens

OTF/PS fonts have recently stopped rendering in Flash Pro CS3 on Windows 7/64

Recently, a number of my OTF/PS fonts have stopped rendering when used in Flash Pro CS3. The fonts appear in the fonts menu, render properly in the font preview popup in the font menu, but the fonts fail to render on stage when used, with certain exceptions:
--If Bitmap Text is selected, the fonts appear (but aliased)
--If Anti-alias for animation is selected, then the text appears when text insertion is active in the text box, but vanishes when focus shifts to another element, tool, selection
In all other cases and for all other settings (yes, including black text with 100% alpha on a white background, etc etc), the text shows solely as transparent. You can select the text (although not see what you're selecting), cut and paste, and as you change the font size, kerning, justification, bold, italic, etc, the text boxes resize as normally expected; simply, the text does not show up.
The fonts work normally in all other CS3 and Windows applications, and up until about last week (Dec 12 or so), used to work fine in Flash.
The problem fonts appear to be (primarily Open Type Format) Post Script Outline fonts.
I have installed all Windows updates, Flash Pro CS3 updates, deleted the Flash user config files, deleted and reinstalled the fonts, and copied the fonts to the C:/user/Program Files/Common/Adobe/Fonts folder.
There were no new installations (applications, fonts, etc) around the time when the error started showing up, aside from possibly Windows updates.
Given the timing (worked fine Tuesday, failed on Wednesday), I believe a Windows update may have been at least partially responsible, though perhaps it's the Mayan apocalypse.
Running Flash Professional CS3 on a Windows 7 64 bit system.

uninstall windows update kb2753842

Apple Imac G5 Wont Run Setup From DVD

hi guys ive got an apple imac g5
and for some reason it wont run setup from any of the mac dvd's or cd's i have
the superdrive spins up and it does nothing even when i press and hold the letter c' key on the keyboard
the spec is as follows
Imac G5 - 17/1.6/2gb/combo/500gb hd
any help would be greatfull
and another thing can i use my windows based pc to load the os via target mode useing firwire
thanks
jason

Another help source (if you haven't already done so).
Go to your OS Help Menu. In the search field type dvd or cd
Click on all the troubleshooting topics & Support Articles that pertain to your issue.
You can also do the same in Disk Utility. Open same up.
At the bottom left of the window, click on the purple button w/the "?" in the middle.
This will bring up the Help Menu.
===============
Try a different brand. Top forum favorites
CDs
FUJI
TDK
Verbatim
DVDs
Maxell
Make sure the DVDs are not dirty, smudged and/or scratched.
http://docs.info.apple.com/article.html?artnum=50448 How to Handle and Clean CD and DVD Discs
Your drive may need cleaning. Cleaning kits can be purchased from any store that sells CD/DVDs.
"can i use my windows based pc to load the os via target mode useing firwire"
Hopefully, someone more knowledgeable than me can answer that one for you.

Setup Stops Running Message When Installing CS3

I get "Setup Stops Running Message" after Disk 1 completes and asks for Disk 2 when I try to install CS3 Master Collection. This is new Dell Vostro 270s PC with Windows 7 Professional that replaces a HP running Windows 7 Home Edition. CS3 ran OK on the HP. Suggestions?

Tommy5017 what happens when you insert disc two? If you need a new copy of the installation files you can follow the directions at http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html. Please make sure to complete the Very Important Instructions prior to scrolling down the page and clicking on the download links.

FastBuild RAID setup wont allow me to create array (grayed-out) HELP!

880GM-E41
amd x4 970
2x WD Raptor 74GB
When I go into the FastBuild RAID menu, everything is grayed out. My drives show up, but they cant be select. These drives were formated. I tried to format again, but the Win 7 setup wont allow me to do it again (grayed-out).
in the "view drive assignments" menu, my two drives say "<single disk>" under "assignment". In the manual it acts like it should say, "free".
in the "define LD" menu the drives show up as well, but everything is grayed-out. Under "assignment" it says, "N" and I cant change it to "Y".
These drives used to be set up as a RAID on my old system and Im really stumped as what to do to make it work.
Thanks,
Cow

PSU - APEVIA|ATX-AQ700W-BK 700W RT
MEM - 2x2G|OCZ OCZ DDR31600
Win 7 x64
The two disks are the WD740GD-00FLC0 and the WD740GD-00FLA1. (both SATA I) I had them in RAID before with my 6 year old Mobo and win XP.
The RAID utility doesn't register it as an array in FastBuild under option 2 or 3. It shows up before the splash screen on startup when RAID does it diagnostic check showing my two drives saying they're healthy. The problem is it just wont let me select them in FastBuild (it shows them, but grayed out)
Clearing CMOS didn't help. I may try to download and flash the BIOS??
This is all very frustrating as my old system had this up and running... but thanks for the help and any future help!
Update: I went ahead and installed windows on one the the drives so I can use the PC, but Im still wanting to put them in RAID, Id hate to reformat and everything to find out it still doesnt work...

Oracle 8.1.7 on RH7.0 Installed fine now wont run at all!

I was able to install Oracle 8.1.7 on RH 7.0 using this fix... http://ftp.valinux.com/pub/support/hjl/glibc/sdk/2.1/README.Oracle8i
The database initialized correctly and I was able to setup and connect to the database. I even ran a port scanner and checked memmory...the thing was running! Then after the reboot the database wont run at all. When I type ./oracle it trys to load and then shows "Segmentation fault (core dumped)". When I try ./oracle start nothing is echoed. I tried to copy the lib files
ld-linux.so.2
libc-2.1.3.so
libdl.so
libpthread.so
to the $ORACLE_HOME/lib/ dir and followed John Smiley's howto but the relink script doesn't work! Even still I think something else is wrong other than the library. Can someone help?

Nevermind figured it out:) Like duh, I should read the damn Installation file:?

Photoshop cs 4 wont run after installation on mac book pro

I recently brought the adobe design premium package with flash, illustrator, indesign, photoshop etc...
after installation all other application works but just photoshop, it just wont start at all...
it will pop up on the deck for a second or two and just disappear. the progra wont run at all. other applications like illustrator, indesign etc... all work just fine but just not photoshop... i dont get it what's wrong. no error or anything. just pop up and then disappear.
the spec of my macbook pro
mac osx 10.6.2
2.53 ghz intel core 2 duo
4 gb 1067 mhz ddr3

So have you done the basics?
Toss the PS folder and run the installer again?
Run the updater from an app you can open? (this will update all)
etc...

Flash pro cs3

this is the third time i re install the free trial version of
flash pro cs3 but everytime i want to run the software i get this
message : PROBLEM WITH TRIAL click next to continue and in the next
page it ask me for the serial key but i dont have it yet since i
want to try the cs3 version first , can you guys please help me fix
this problem i want to try cs3 first before moving from version 8
thank you .

I am having the same problem with my Dell workstation with Windows XP SP3. I take it no one has answered this?

Flash Pro (CS3) will not open after file 'AuthPlay.dll" removed from Acrobat 9.

A recent Adobe security issue recommened removal of 'AuthPlay.dll' from Acrobat Pro v9x. When trying to open Flash Pro (CS3) the program throws an error " The AuthPlay.dll/Lib is missing from the configurration folder" and the program will not run. Anyone know of a workaround or a way to open Flash Pro without the dll in question?

Mountain LION is not a supported platform for Adobe Contribute CS4. The supported versions are Latest Adobe Contribute 6.5 and Adobe Contribute CS5.X.

HELP!!! Internet Explorer 8 wont download Flash 10.1

Hello
I am using the IE 8 32 bit browser...i go to get.adobe.com/flashplayer to get the new version...I have uninstalled the previous version first. when i go to download the yellow bar that says AGREE AND DOWNLOAD will not launch the download...I have tried several methods...It works just fine with Mozilla but I need it to work with IE for PLAY ON .....I worked with Microsoft they have no clue and PLAY ON passes the buck...
I am using Spyware doctor for a virus program and just the windows firewall..i have stopped both of them in the mean time to help get this program downloaded..
All I need is FLASH working inside IE and im all set... but it just wont download at all....i did find something where it said to manually install then shut internet connection down..i did that and thats why im here still stuck.
any suggestions!!! they are all apreciated

pwillener wrote:
jh029s wrote:
....i did find something where it said to manually install then shut internet connection down..
Where did you find such a thing...? Most likely it was
download the offline ActiveX installer http://fpdownload.adobe.com/get/flashplayer/current/install_flash_play er_ax.exe and save it to disk;
close all Internet Explorer windows, then run the downloaded installer.
Did the installer complete?
Can you see the Flash animation at http://www.adobe.com/software/flash/about/ ?
im sure that is what it was...i found it on the internet and a google search for IE8 wont download flash....
the installer does complete though when i went to the http://www.adobe.com/software/flash/about/ link
but IE8 does not show any flash at all....it wont let it work...i can see the newest version is installed..no flash
im using IE8 32 bit

Wvc54gca Wont stop Flashing

I have 2 wvc54gca's that worked fine until now. i changed encryption settings on my router (WRT54gs) and when i when to set them on the cameras i couldn't log on to them. So I reset the cameras and now the blue light wont stop flashing.

Hardwired the camera to the Router.Turn-off the camera for sometime.Turn it ON back again...No go to the router's setup page and check the ip address of the camera under client table...Open the setup page of the Camera and reconfigure it from the scratch.

Setup Wont Run (Flash Perfesional CS3)

Similar Messages

Maybe you are looking for