SetupIP fails on Win7 and Win8

Updating groupwise client via SetupIP works perfectly on WindowsXP workstations. Launching the SetupIP.exe from Win7 or Win8 machines, we get this alert:
SetupIP is unable to copy Setup-Files. Contact Systemadministrator.
Apache configuration seems to be correct and wireshark gives no hint. The error must depend on the local workstation.
Any help is appreciated. Thanks in advance
--Ferdi

fgiese,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Similar Messages

  • Unable to sync my replacement 7th generation Ipod Nano. Previous nano had no issue. Both Win7 and Win8 Pc's fail sync. I am an admin on both machines.

    I don't know why my new 7th Generation Ipod fails sync diags on both Win7 and Win8 computers. I am an admin on both machines. The computer sees the device, but ITunes does not, but yet I can eject the ipod.

    Hello Dee Nano.
    It sounds like your iPod nano is recognized by your PCs, but it isn’t recognized by iTunes. Try the suggestions in the article linked below, they will resolve most issues like this.
    iPod: Appears in Windows but not in iTunes
    Cheers!
    -Jason

  • Acrobat XI unstable on Win7 and Win8

    Anyone else having trouble with creating/appending a webpage from browser to a PDF.
    Typical problems:
    firefox crashes during creation
    Creation popup window keeps running with no progress
    Error popups "DDE unable to communicate with Acrobat"
    In ability to capture Web pages that have JavaScript
    ( The most frequent language on the web;  Acrobat has JS built in )
    When this happens, I stop having the browser append the page,
    and instead request the page be appended from Acrobat.
    Serious Flaw:  If the page I'm viewing was arrived at by Single Sign On
    to the site, Acrobat will only collect the signon redirection page.
    That is why appending the page from a logged in browser is important.
    Most annoying:  Acrobat does not remember the name of the last PDF used.
    It always truncates the name into something unusable.
    I have to ALWAYS find the last PDF I was writing to for a new "Append" request
    Acrobat becomes non-responsive when DDE connections fail.
    It means I cannot launch Acrobat at all ... even for different pdf files.
    Solution:  Task Mugger and kill the running Acrobat processes.
    I have several Acrobat dmp files ... I opt-in to "make Acrobat better" ... is Adobe
    getting these crash failures?  Something more I have to do at my end?
    As far as I can tell by dates, the crashes had nothing to do with Task Manager kills.
    I see the same problems in both Win7 and Win8.
    Acrobat X worked much better ... but the plugin was only available for Internet Explorer,
    so I upgraded to XI.
    Super annoying:  Adobe does not appear to ever have tested appending from a
    browser to a PDF that was just created.   It always presents a corrupted filename
    for selection.
    My Solution:
    Create an entirely new directory
    Place the pdf I want to create there as the only file
    When Acrobat "forgets" the filename, it does still remember the directory
    and I don't have to search for the PDF I want to append to.
    It still is an additional keystroke to select the file ... which really slows me down.
    Please fix these things.  Or do I have to wait for XII version to get any fixes?
    I am using Acrobat XI Pro Version 11.0.06

    Perfect example of failures.  Viewing this page from firefox, "convert to PDF"
    http://forums.adobe.com/message/5140738#5140738
    It hangs and two windows are open:
    Apparently can't copy/paste images.  Here they are:
    And the firefox crash when I attempted to Append to a pdf:

  • Can't get brushes and swatches to sync, only settings/workspaces.  (Win7 and Win8.1, latest photoshop)

    I have Photoshop CC 2014 installed and updated on a Win7 machine and a Win8.1 machine.  When I go to edit>preferences>sync settings, everything is checked, but it seems that only my workspace settings get uploaded.  It never seems to transfer my swatches or brushes.  They are stored in the default location and show up in the brush and swatch menus.

    Do they play in iTunes?

  • Print servers and printers problems on Win7 and Win8

    Hello,
    We have some computers, working on Windows operating system in the office: a few forking on the good old XP sp3, one running on the Win7 x64 home edition and one running on Win8 professional (the last one installed for new OS testing purposes)
    During last two months I have tested a few print servers attempting to find one which can work with Windows 7: Trendnet, Synology, and D-link print servers. However, unsuccessfully. Here is the result:
       1) Any print servers is working perfectly with WinXP sp3 (full printing and MFP function support, easy configuration and access, successfully scanning and printing operations in 100% cases)
       2) No one print server is working correctly with Win7 home x64 (mostly successful installation but complicated and unclear configuration; printed pages often is missing, no scan support for MFP.
       3) There is a little bit better situation with Win8: 100% printing support on the same equipment but no scan support for MFP
    Could you please help me with followings:
    1) Could you please help me configure print servers and printers on Win7 x64, including printing and scanning support?
    2) Could you please help me configure scanning support for Win8?
    Please find full list of affected hardware bellow:
    1) Machines, running on Win XP: Panasonic CF-29, CF-74, HP Compaq dc7600, some Acer laptops;
    2) Machine, running on Win7 x64 home: Asus UX21, (OS probably was preinstalled on the factory)
    3) Machine, running on Win8 pro: Lenovo X200 tablet
    4) Printer HP LJ1020 with drivers for XP and Win7, x86 and x64
    5) MFP printer Canon MP600 with drivers for XP and Win7, x86 and x64
    6) Print server: D-link DPR-2000
    7) Router: Cisco RV042G
    All the machines has correct drivers installed, all the printers supports all the services if connected to computer directly. I have made all possible steps solving mentioned problems, including automated problem solving wizards on Win7.
    Thanks in advance for your support

    Hi,
    Regarding the printer configure issue, I would like to share the following article:
    Managing Printers and Print Servers
    http://technet.microsoft.com/en-us/library/cc754769.aspx
    According to the scanning support for Win8, it is better to post this issue in Windows 8 forum for more help.
    Regards,
    Vincent Wang
    TechNet Community Support

  • Cannot install Acrobat from CS6 in Win7 and win8 Chinese platform

    The error code are as follows:
    Exit Code: 6
    Please see specific errors and warnings below for troubleshooting. For example,  ERROR: DW050 ... WARNING: DF029, DW065 ...
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 3 error(s), 7 warning(s)
    WARNING: DW065: Display requirements not met for {402F6F2E-5683-491C-977D-0CA599A07CAF} CS6 Design and Web Premium 6.0.0.0
    WARNING: DW065: Display requirements not met for {A4ED5E53-7AA0-11E1-BF04-B2D4D4A5360E} Adobe Dreamweaver CS6 12.0.0.0
    WARNING: DW065: Display requirements not met for {9D3BB9DA-1F59-4DCF-A0BB-691FA8EA2582} Adobe Illustrator CS6 Core (64 Bit) 16.0.0.0
    WARNING: DW065: Display requirements not met for {7D4E9D10-AED6-485D-A2B0-9A1DF1A55545} Adobe Illustrator CS6 Core 16.0.0.0
    ----------- Payload: {CFA46C39-C539-4BE9-9364-495003C714AD} Adobe SwitchBoard 2.0 2.0.0.0 -----------
    WARNING: DF029: ARKServiceControl::StartService: Service not started/stopped SwitchBoard. Current State: 0 Exit Code: 0 Service Specific Exit Code: 0(Seq 1)
    ----------- Payload: {AC76BA86-1033-F400-7760-000000000005} Acrobat Professional 10.0.0.0 -----------
    ERROR: Error 1324.The path R嶰up廨er un document num廨is?sur un multifonction.sequ or the volume is invalid. Please enter it again.
    ERROR: Install MSI payload failed with error: 1603 - 安裝時發生嚴重錯誤。
    MSI Error message: Error 1324.The path R嶰up廨er un document num廨is?sur un multifonction.sequ or the volume is invalid. Please enter it again.
    ----------- Payload: {CA7C485C-7A89-11E1-B2C8-CD54B377BC52} Adobe Fireworks CS6 12.0.0.0 -----------
    WARNING: DF012: File/Folder does not exist at F:\Adobe CS6\payloads\AdobeFireworks12-mul\OEM(Seq 2141)
    ----------- Payload: {05E1E278-7A8D-11E1-A0B9-FC0245DB7244} Adobe Fireworks CS6_AdobeFireworks12en_USLanguagePack 12.0.0.0 -----------
    WARNING: DF012: File/Folder does not exist at F:\Adobe CS6\payloads\AdobeFireworks12en_USLanguagePack\OEM(Seq 76)
    ERROR: DW050: The following payload errors were found during install:
    ERROR: DW050:  - Acrobat Professional: Install failed
    please help

    See the following help document:
    Exit Code: 6, Exit Code: 7 Installation Errors -
    http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html

  • Hp Laser Jet 1020 network printing fail over win7 and Vista

    Printer prints fine when is connected to computer trough USB but when shared over the network between Vista or 7 and another PC tries to print.  Jobs stays in the queue labelled 'Printing' but nothing happens.
    Printing over the network only works when 'Print Spooler' is manually stopped and then restarted on the PC the printer is connected to for each job!
    Printer used to work fine under XP with network sharing.
    On local and networked PC, the printer use port "USB001"
    Searching trough many forums i found this problem sill remains unsolved for 1020 and some other printers.
    I have to admit that i had test all available versions of a driver. 

    Have you tried to setup the Local Port using, \\Win7Computername\Printername on the other computer?
    Please mark the post that solves your issue as "Accept as Solution".
    If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
    I am not a HP employee.

  • Flash Player crash in IE on Win7 and Win8.1 on allow camera/microphone access

    Hello,
    My web app crashes for 2 my clients in IE, when they start broadcast and press "Allow" button in security dialog.  Other browsers works fine for them. Has anyone experienced similar problem?
    I don't have enough info to fill ticket yet.
    Stan

    Thanks for your prompt and helpful reply.....
    When dealing with such a large problem with frequent FF lockups the temptation is to lump all information in an attempt to solve. LOL
    Chasing multiple threads to help solve the problem may be helpful to the developers but it takes far too much time following and posting in each thread. As you can see it's taken a couple of days to get back to this post.
    First thing we did is dump cache and cookies both through the interface and then manually in the profile. We changed the version of Flash installed manually and even changed the version of FF. There are many "flash" enabled pages we encountered which caused the lockup.....so MSN is not specifically the issue.
    But when Flash is removed or disabled the browser no longer locks up.....suffice to say we get an error when visiting a website with flash content on it.
    That is why I chose to post here as the problem is directly attributable to Flash in FF on all of our machines.
    Paul

  • Unable to visual basic 2008 to win7 and win8

    Hi sir,
    When trying to install, clicking to the setup file, I get the first screen windows and then clicking OK to process instalation I can not get further !
    Anxious to hear from you

    Hell jcpakuvey,
    We are lack of info to help you track this issue. So please refer to this article:
    https://support.microsoft.com/en-us/kb/2899270?wa=wsignin1.0
    And collect logs for us:
    Download the
    Microsoft Visual Studio and .NET Framework Log Collection tool
          (http://www.microsoft.com/en-us/download/details.aspx?id=12493)    
    (collect.exe).
    Run the collect.exe tool from the directory where you saved the tool.
    The utility creates a compressed cabinet file of all the VS and .NET logs to %TEMP%\vslogs.cab.
    Post the vslogs.cab file with some descriptions of your issue to the forum.
    And my concern is that Visual Studio Express 2008 is already out of support and I cannot provide a way for you to verify your source. Why you need Express 2008 and do you mind to update to use the latest Visual Studio 2013 Express version? In that way, you
    can verify you source by refer to here
    https://www.visualstudio.com/en-us/downloads/visual-studio-2013-iso-sha1-vs and you can also benifit from many new features.
    By the way, VS Express 2008 ISO download page
    http://blogs.msdn.com/b/wriju/archive/2007/11/21/visual-studio-2008-express-iso-image-download.aspx
    If your package is a webinstaller, then you can try the ISO image above.
    Best regards,
    Barry
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • X1Carbon Dual Boot Win7 and Win8

    I've got both sets of OEM Windows disks for the X1 Carbon (which I love), and I'd like to get both operating systems loaded with dual boot functionality.  Can't seem to figure out how to do it since these disks just load automatically and wipe out the drive.  Any ideas?

    BHruska wrote:
    I've got both sets of OEM Windows disks for the X1 Carbon (which I love), and I'd like to get both operating systems loaded with dual boot functionality.  Can't seem to figure out how to do it since these disks just load automatically and wipe out the drive.  Any ideas?
    Load Windows 7 first, then load Windows 8.  You need separate partitions for each or you need to use dual boot from VHD.

  • I upgraded my PC from Win7 to Win8 and installed itunes, when I plug my ipod in it wants to erase it as its sync'd to another PC.  How do I fix this a I dont want to loose my playlists?

    I upgraded my PC from Win7 to Win8 and installed itunes, when I plug my ipod in it wants to erase it as its sync'd to another PC.  How do I fix this a I dont want to loose my playlists?

    The iphone is not a storage/backup device.  The sync is one way - computer to iphone.  The exception is itunes purchases:  File>Transfer Purchases
    Copy everything from your other library/computer, or your backup copy, to your new library/computer

  • How to create a Pooled VDI infrastructure using Win server 2012 as VM image?I have followed the "usual" way to build a pooled VDI desktop using Win7 or Win8 with success, but it fails when I use an image of Win Server 2012 as VM

    I have followed the "usual" way to build a pooled VDI desktop using Win7 or Win8 with success, but it fails when I use an image of Win Server 2012 as VM instead.
    Am I overlooking something?  Should I need to prepare the image in a different way? (Sysprep differently?)
    Thanks

    Hi,
    Thank you for your posting in Windows Server Forum.
    Can you specify the error which you are facing during VDI setup for server 2012?
    I might think that you need to check the memory setting for server 2012, as might happens that due to less memory you can’t setup the VDI setup properly. 
    Memory: If the Master VM is configured with static memory, it must have at least 1024 MB as startup RAM. If the Master VM is configured with dynamic memory, the maximum RAM must be at least 1024 MB.
    Please check beneath article for information.
    Windows
    Server 2012 2,500-user pooled VDI deployment guide (Doc)
    Single Image Management for Virtual Desktop Collections in Windows Server 2012
    Hope it helps!
    Thanks.
    Dharmesh Solanki

  • Pod Touch 32GB MTP USB device has failed to install and can't sync.

    After updating iTunes on my Win7 64bit PC, when I plug my iPod Touch 32GB in, I get the error message "MTP USB device has failed to install" and can't sync. Yesterday, everything worked well.
    Need help, please!

    Thank you. I removed iTunes, QT, Safari and related software, then applied a Windows update and reinstalled iTunes and related software. It solved my problem and let me sync my iPod.
    Thanks!

  • The Command Get-ADUser -Identity username -Properties * No Longer Works Due to a Bug in PowerShell 4 and Win8-1 Pro

    The 'Command Get-ADUser -Identity <username> -Properties *' No Longer Works Due to a Bug in PowerShell 4 and Win8-1 Pro
    It produces the following error:
    Get-ADUser : One or more properties are invalid.
    Parameter name: msDS-AssignedAuthNPolicy
    At line:1 char:1
    + Get-ADUser -Identity ********** -Properties *
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        + CategoryInfo          : InvalidArgument: (**********:ADUser) [Get-ADUser], ArgumentException
        + FullyQualifiedErrorId : ActiveDirectoryCmdlet:System.ArgumentException,Microsoft.ActiveDirectory.Management.Commands.GetADUser
    This is already documented in these forums:
    1. http://social.technet.microsoft.com/Forums/systemcenter/en-US/1bf9568e-6adc-495d-a37c-48877f86985a/powershell-40-and-the-activedirectory-ps-module?forum=w81previtpro
    2. https://connect.microsoft.com/PowerShell/feedback/details/806452/windows-8-1-powershell-4-0-get-adcomputer-properties-bug
    Unfortunately, in typical style, Microsoft have archived number 1 without bothering to respond with advice.  Can someone in Microsoft please advise your customers here if this is being investigated and of any available workaround or fix ?
    -- huddie "If you're not seeking help or offering it, you probably shouldn't be here."

    Did you consider using one of the "workarounds" below to run an existing version of the AD Module for PowerShell under a specific PowerShell version:
    a. #require -version 3.0    (in ps1 script)
    b. powershell -version 3.0
    Thank you for sharing with us if this helps.
    Desmond, did you miss my reply below ?  I still haven't heard back from you:
    >> "Desmond,
    >> 
    >> Thanks for your quick response.
    >> 
    >> I'm running this just as a command, not in a script:
    >> 
    >> Get-ADUser -Identity <username> -Properties *
    >> 
    >> When I try to run powershell
    -version 3.0 first, then run the above command, it still fails with the same error.  When I then run Get-Host,
    the version still shows as 4.0 so maybe there's more I need to do to launch a 3.0 host.  Anyway, from what I've read it seems your command is more aimed at script compatibility.
    >> 
    >> Can you help ?"
    -- huddie "If you're not seeking help or offering it, you probably shouldn't be here."

  • What is the 0x80070570 error when installing Win7 or Win8 or Win 8.1 on a clean SSD/HDD ?!

    Hello,
    My computer was working perfectly with Win7 for about 2years until I formatted on monday to clean a little bit my drives ... Since then I'm unable to install windows again. I have the 0x80070570 error.
    The complete error message is:
    Windows cannot install required files. The file may be corrupt or missing. Make sure that all files required for installation are available and restart the installation. Error code:0x80070570.
    What is the 0x80070570 error when installing Win7 or Win8 or Win 8.1 on a clean SSD/HDD ?! These versions are full from MSDN.
    What I did already:
    check my RAM (16go gskill)
    remove unnecessary hard drives
    replace my "old" SSD with a clean new one
    remove my sound cards
    remove the mouse and use only keyboard
    reset the BIOS
    check every LED on the motherboard (asus sabertooth z77) and there is no problem
    What are the problems?
    Thanks,
    Adrien.

    Hi,
    If all images cannot be installed, we have a reason to suspect the hardware cause.
    If you use two memory slots to get 16G RAM, I suggest you test with just one (8G) to check the result.
    Alex Zhao
    TechNet Community Support

Maybe you are looking for