Setups for new operating units not loading to target

If there is a new operating unit in the source, setups for that operating unit do not seem to load into the target if that new operating unit does not exist in the target.
Is there a script to address this issue?
Any additional advice will be appreciated.
Edited by: user11071661 on Apr 16, 2009 1:34 PM

Hi,
There are lot of dependencies between setup data that you are trying to load. Operating Unit depends on Accounting Setup which in turn depends on setups like Calendar, Currencies and Chart of Accounts. So, you have to make sure that you have loaded all prerequisite data before loading operating unit.
Thanks
Mugunthan.

Similar Messages

  • When trying to setup a new Operating Unit gives an error: FRM-40735: PRE-FORM trigger raised unhandled exception ORA-06502

    EBS - Payables - Version 12.1.3.
    We Have many others Operating Units configured and no errors occurs.
    This error occurs only if we set a new OU.
    All profiles have been configured properly. (MO: Operating Unit, HR: Security Profile, etc..)
    The trace shows:
    SELECT PROFILE_OPTION_VALUE
      FROM FND_PROFILE_OPTION_VALUES
    WHERE PROFILE_OPTION_ID = 5852                           
       AND APPLICATION_ID = 178
       AND LEVEL_ID = 10003
       AND LEVEL_VALUE = 124280
       AND LEVEL_VALUE_APPLICATION_ID = 200        
       AND PROFILE_OPTION_VALUE IS NOT NULL
    The PROFILE_OPTION_ID = 5852   is  "ICX:Session Timeout".
    If I set this profile the error does not occur. But its is very strange to have to configure it for a responsibility level.

    Hi All.
    I discovered what the problem was.
    The size of the name of the responsibility was with many characters.
    Reduced the size and the error stopped occur.
    Tks!

  • Receiving Error : Please set the Receivables system options for this operating unit and ensure that the MO: Operating Unit profile option is correctly set with an operating unit that is set up in Receivables. while trying to create a new Customer.

    Hi All,
    We have set up a new Operating Unit in Oracle Apps. Now when I am trying to create a new Customer in that Operating Unit, I am receiving following error:
    ERROR MESSAGE:-Please set the Receivables system options for this operating unit and ensure that the MO: Operating Unit profile option is correctly set with an operating unit that is set up in Receivables.
    We do have MO: Operating Unit and MO: Default Operating Unit set properly at Responsibility level for the Responsibility through which I am accessing this form.
    Your help is appreciated!
    Thanks in advance,
    SKA

    You can refer this thread and check your MO operating unit is set or not https://community.oracle.com/message/3937028 thanks

  • How to load existing Ship TO's and BILL TO's to new Operating Unit

    Hi Apps Gurus,
    We enabled new Operating Unit and need to load existing Operating Unit Bill TO's and SHIP TO's to new Operating Unit. Please let us know the procedure to meet this requirement.
    Thanks in Advance....
    Venky

    Sorry about the lost iPod.
    In order to load my existing iTunes library on to the new Nano, do I just simply place the iPod in the cradle and sync? I am scared to just do this, in case I lose the library.
    If you're speaking of the iTunes library's safety, you'll be perfectly fine. iTunes would only delete songs off your iPod (if there currently are songs ont he iPod), and iTunes would never delete anything from it's library unless you did it yourself.
    Basically, the iTunes-to-iPod transfer is one-way; you can't directly transfer your iPod songs to iTuens, nor does a new iPod affect your iTunes library.
    Most likely, when you connect your new iPod to your computer, iTunes will simply begin to update your new iPod, downloading songs from the iTunes library onto your iPod.
    I hope that answers your question.
    -Kylene

  • New Operating Unit creation - GL or HRMS

    Dears,
    Please i ve a great doubt, please advice which is right approach....
    Using General Ledger -Accounting Setup manager under Primary ledger there is a option to create new Operating unit by attaching LE and BG.
    If i do so i get new OU and my other sub modules in Financials(AP,AR,CM.FA) are operational ...
    using HRMS - organization i can designate any Company organization as Operating unit,so that New operating unit would be created this way also.
    Kindly advice which is the best way to create new Operating Unit...
    and also in Projects implementation setup ...starting organization LOV represent OU from HRMS or org Hierarchy...
    Kindly clarify...
    Thanks a lot n advance...

    I create 3 OUs this using GL > Accounting Setup Manager ... under the primary Ledger (by attaching LE and BG).....but I am not able to find/search that in HR under Work structures > Organization > Description. Although it is available in the LOV while defining the profile option "MO: Operating Unit" ....and it is present in the Database table '*hr_all_organization_units*' too with the 'Type' column as empty (ideally it should be 'OU').
    It makes me feel that in any case I would have to create the OU in HR as a mandatory setup!....am I correct?

  • Getting the new operating unit to show up in a PO

    Hi,
    Besides the standard operating units that come with the EBS suite 12 vision instance, I've created a new operating unit but when I create a PO, I still only see vision operations as the standard operating unit. How do I get create a PO against the new operating unit I just created? I'm sure I'm missing steps but have not been able to find a concise guide.
    thanks for any assistance.

    You need to attach MO: Operating Unit profile option with your responsibility from where you are creating PO

  • Error message after creating new responsibitiy on new Operating Unit

    Hi All,
    Steps to Reproduce:
    1- Add new Legal entity
    2- Adding new operating unit from (define organization) with the organization classifications :
    a. HR Organization
    b. Operating Unit
    c. Company Cost Center
    3- Run the request “Replicate Seed Data”
    4- Adding the new Operating Unit in company all Operating units security profile
    5- Adding the security profile for the new Operating unit
    6- run the request "Security List Maintenance” for “, ALL_PROFILES, , , ALL, , ,”
    7- Create new responsibility
    8- In profile option at the responsibility level add the operating unit and the security profile for the new responsibility
    9- Add the new responsibility to an existing user
    10- the Error "AP_FINAP_NOT_DEFINED" appearing when try to open any form
    thanks in advance,

    From Oracle Support:
    *R12: APXINWKB : Unable to Create New Invoices due to AP_FINAP_NOT_DEFINED for Security Group [ID 1092873.1]*
    Run the HR concurrent program Security List Maintenance after creating a new Security Profile.
    Be sure that the parameter "Generate List For" is set to "All security profiles".

  • Profile Option: HZ: Display Accounts for All Operating Units

    I just noticed this profile option, but cannot find any documentation stating what it does. Does anyone know? Offhand, it sounds like the customer account is now org-striped, in addition to the sites, but I don't see any other evidence of this.
    Thanks.

    Have you looked at note 369821.1.?
    It says,
    If you want to review all of the Quotes for all organizations then you need to set the profile "HZ: Display Accounts for All Operating Units" to "Yes" at the site level. After that you will be able to see all the transactions in OCO for all organizations. Sandeep Gandhi

  • Error  invalid location structure for this operating unit

    Dear all
    when go to Receivables > setup> tax > locations i get this error and i can't solve it
    invalid location structure for this operating unit
    any one can help

    Hi
    In system option u have to define the tax type .there is a tab in system option Tax and Defaults.select u r tax type and enter the tax code.
    Regards
    Ahmed

  • R12/AR :Invalid location structure for this operating unit

    Hi all,
    In AR Responsability: Set up / Tax / Location ............Error:Invalid location structure for this operating unit.
    Whats wrong???
    Thanks

    Hi,
    Which version you are in?
    If in R12, Have you done setups in E-Business Tax first?
    Also check Key flexfields of AR.
    Regards,
    Sridhar
    Edited by: K Sridhar on Jun 14, 2009 12:40 PM

  • Why does the new operating system not delete the moved files from their original location - it seems like an enormous waste of space, time and effort to clean up every file once you've moved it

    Why does the new operating system not delete the moved files from their original locations - it seems like an enormous waste of space, time and effort to clean up every file once you've moved it - also, when transferring large amounts of files it becomes a very large problem remembering which files were transferred and which not.

    You're going to need to be more specific, as I'm not quite sure I understand what you're talking about.
    If you're referring to copying from an external hard drive or flash drive, and you want to actually move files rather than copy them, you can hold down the option key to force it to do a "move" rather than a "copy." This is not new behavior, though... the Mac OS has worked this way as long as I can recall (and I've been using it since 1984).
    If you're having a problem with trying to move files from one place to another on a single drive causing them to be copied instead, that is likely because of some permissions issue preventing you from actually being able to move them.

  • Single concurrent program for multiple operating units

    HI
    I am working on XML/BI publisher to generate AR invoice reports.
    We have single rdf report using which rtf templates are generated.
    There are 10 operating units (10 ORG_ID's) and 10 rtf templates, one for each operating unit. There are 4 different responsibilities for each ORG_ID
    Eg: ORG_ID's = 11, 12, 13, 14..........etc
    Eg: Responsibility = xx, yy, zz...........etc
    I want to register a single concurrent program. When a user submits a request from "XX" responsibility, then the template associated with that org_id should be generated. Whichever responsibility the user is accessing from, that particular template must be shown as output.
    How can i register one concurrent program for multiple operating units.
    Thanks!
    Edited by: 994628 on Mar 18, 2013 4:39 PM
    Edited by: 994628 on Mar 18, 2013 4:42 PM

    >
    There are 10 operating units (10 ORG_ID's) and 10 rtf templates, one for each operating unit. There are 4 different responsibilities for each ORG_ID
    Eg: ORG_ID's = 11, 12, 13, 14..........etc
    Eg: Responsibility = xx, yy, zz...........etc
    I want to register a single concurrent program. When a user submits a request from "XX" responsibility, then the template associated with that org_id should be generated. Whichever responsibility the user is accessing from, that particular template must be shown as output.
    >
    interesting case for 10 OE set 10 template
    what is purpose? for each OE different requirements for layout?
    BTW
    if each Responsibility associated with one org_id then
    - you can get current org_id when you run concurrent program
    - create main template (will be #11) with condition like
    <?choose:?>
    <?when: ORG_ID=11?>
    <?import:xdo://FND.XX11_SUB.en.00/?>
    <?call:TEMPLATE11?>
    <?end when?>
    <?when: ORG_ID=12?>
    <?import:xdo://FND.XX12_SUB.en.00/?>
    <?call:TEMPLATE12?>
    <?end when?>
    <?otherwise:?>
    <?import:xdo://FND.XX21_SUB.en.00/?>
    <?call:TEMPLATE21?>
    <?end otherwise?>
    <?end choose?>so based on org_id will be import of needed subtemplate
    - re-register your "10 rtf templates" as subtemplates
    another way is substitution of template for concurrent then it running
    in before_report trigger set needed template
    l_conc_request_id := fnd_global.conc_request_id;
        if ORG_ID = 11 then
          UPDATE fnd_conc_pp_actions t
             SET t.argument2 = 'XX11'
           where t.concurrent_request_id = l_conc_request_id
             and t.action_type = 6;
      if ORG_ID = 21 then
          UPDATE fnd_conc_pp_actions t
             SET t.argument2 = 'XX21'
           where t.concurrent_request_id = l_conc_request_id
             and t.action_type = 6;

  • I want to set up 5 different ipods to sync from one library, but want to be able to control what is synced to each ipod and have it remember that for future synching and just look for new songs and not sync all the other music in the library

    I want to set up 5 different ipods to sync from one library, but want to be able to control what is synced to each ipod and have it remember that for future synching and just look for new songs and not sync all the other music in the library

    Click here for options.
    (58961)

  • HT1498 I rent a movie and I can see it.  And I go to iTunes Store, check for rentals and its not loading the movie.

    I rent a movie and I can't see it.   I went to itune store and check for rentals, but its not loading the movie.  What should I do?

    I went to check for rentals on Apple TV to find rental. There is no support and no resolve. The screen just kept loading, never showing the movie after I purchased it. This is the second time this has happened to me. Very disappointed.
    My have to look for alternative..

  • Sometimes when I open a link in a new tab, the new tab does not load the link.

    Sometimes when I open a link in a new tab, the new tab does not load the link. This seems to be random.
    Win 7 64
    FF 4.0.1

    This issue can be caused by an extension that isn't working properly.
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    * Don't make any changes on the Safe mode start window.
    * https://support.mozilla.com/kb/Safe+Mode
    * https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Maybe you are looking for