Several buttons that do the same behavior

Hello,
I need to have several buttons that do the same behavior.
For brevity, I do not want to attribute to them each time a different instance name.
Is there a way to perform many buttons the same function (eg trace ("foo");?
And:
1)  without converting all the buttons in a single symbol, this is because I often need to give different positions on the Stage;
2)  without to write a different script for each button?
Thank you.
John.

You would want to use a for loop for your need and dynamically reference each button instance. In the below example, create 4 buttons on your stage at the root level and give them instance names of "btn1", "btn2", "btn3" & "btn4". Then insert the following on the root timeline.
stop();
for (var i:Number = 1; i <= 4; i++){
          _root["btn"+i].onRollOver = function(){
                    trace("foo"+this._name);

Similar Messages

  • Is there a way to create a button that works the same as the ImageField?

    I am trying to create a button that acts like the ImageField tool. I want to be able to click on the button and it will direct me to browse for my photo that I want to attach.
    I am using LiveCycle. (I am a nooby and have limited skills when it comes to script)
    The ImageField function is to complex of a function for the use on my IPAD (PDF Expert APP). I can create a photo button using Adobe Form Creater and it works fine with the below script:
    event.target.buttonImportIcon ();
    This is a mouseup Action Event.
    My form that has been created in LiveCycle works perfectly on my IPad, except the photos. If I can simplify the function of the photos to act more like the Adobe Form Creater tool, then perhaps it will all work together.
    Any ideas, or is this just a waste of time? I have created the form over using Adobe Form Creater, but it has some limitations that make it not function as nice as LiveCycle's form.
    Thanks

    Not in Acrobat unless your image is already in the PDF format.
    This is a feature of forms created with LiveCycle Designer.

  • I used to give my photo's keywords. Most of the time I have several photo's for the same keyword and it was possible to select all those photo's and give them the keyword in one move. Since of few weeks I can't do that anymore and I find it very annoying.

    I used to give my photo's keywords. Most of the time I have several photo's for the same keyword and it was possible to select all those photo's and give them the keyword in one move. Since of few weeks I can't do that anymore and it's very annoying. What can I do to get back to the former situation?

    . Since of few weeks I can't do that anymore and it's very annoying. What can I do to get back to the former situation?
    Check, if you have the "Primary Only" option enabled. Then keywords will only be applied to the "Primary Image":
    See:                  Keywords or ratings are applied only to one of the selected images - why?
    Uncheck the little square button with the "1".

  • I upgrade my firefox to 3.6.4 but when i add some add-ons they tell me that i have 3.5.8 & i have to upgrade it ... i reinstalle 3.6.4 several time but still the same problem

    i upgraded my firefox to 3.6.4 but when i add some add-ons it tell me that i have 3.5.8 & i have to upgrade it ... i reinstall 3.6.4 several times but still the same problem ...
    == 2-3 days ago

    Look at the highlighted copy of your Help > About Mozilla Firefox image attached below this message.
    <u>'''Reset general user-agent'''</u>
    -In Firefox, type '''about:config''' in the URL bar and press the Enter key.
    -If you see the warning, accept it (promise to be careful).
    -Filter = general.useragent.extra.firefox
    -Right-click that preference and select Reset
    -Then restart Firefox (File > Restart Firefox)

  • I tried to install yosemite yesterday and my computer goes through the whole installation process and then to a blank white screen.  I've rebooted, I've reinstalled several times and get the same result.  Two days wasted!

    I tried to install yosemite yesterday and my computer goes through the whole installation process and then to a blank white screen.  I've rebooted, I've reinstalled several times and get the same result.  Two days wasted and I can't use my computer!!

    I don't know if you've already resolved your problem, but I had the same thing, it took me 6 hours to fix it. I had the exact same as you, installed the update and then it went to a white screen. After trying start up holding down cmmd r or holding down the alt key to try to install it again, nothing worked, same result every time. Then an angel came to me here somewhere but I can't find it now to thank him. Start in safe mode, press shift once you hear the start up chime and hold it down until you hear it again. Installation completion box came up and it was working. turn off computer and start up again normally and all is well. Except my final cut pro x doesn't work with it, have to update that now too. same as when I updated to mavericks.
    Hope this helps.

  • Upgraded to 5.4 when opening lightroom get a message "encountered an error when reading from its preview cache and need to quite" tried this several time but get the same eror message

    Upgraded to 5.4 when opening lightroom get a message "encountered an error when reading from its preview cache and need to quite" tried this several time but get the same error message.  Says Lightroom will attempt to fix the problem the next time it launches but that is not happening.  How do it fix this?

    Delete the preview cache using your operating system. It is a folder whose name ends with Previews.LRDATA. Do not delete the Lightroom catalog, which ends with .LRCAT

  • Can I print several different pics of the same size on one shee  of papert?

    Hi,
    I should like to print a group of several different pics of the same size & resolution on one sheet of (A4) paper eg 6 family photos. There doesn't seem to be a template for this - just two choices of format (both with one large and a few smaller format) and there is no 'Printer' pop up menu.
    I tried to laboriously copy pics to a two column works word processing document (after resizing in a different one so that they would fit in the columns). This is time consuming and when down sizing the pics lose resolution!
    Maybe I can download templates somewhere on the apple site as suggested by apple care but I couldn't find out where. Maybe there is a possibility of doing some contact prints?
    Any help much appreciated - many thanks - John

    Select the 6 photos you want printed in the iPhoto Library or Album window.
    Choose File->Print.
    In the Print dialog box, Select the paper size in the Paper popup menu.
    In the Style popup menu, select N-Up.
    In the Photos per page popup select 6.
    The preview should show what you'll get. I hope its what you wanted.
    Message was edited by: Thomas Emmerich

  • Password cache - for user identity that share the same application server

    I have different user identity that share the same application server passwords.
    When I create a password cache entry for an an application server I have to be specified the User identity for the application server. Is there a way to indicate multiple User identity in order to avoid to create different entry (one for each user identity)?

    No. An SGD user can only have a single username for an application server.
    There may be a way to craft a solution:
    - create several ENS application server objects pointing to the same real application server
    - cache different usernames against each ENS application server
    - create multiple, identical application objects, assigning a different application server to each, OR
    - create a single application object and assign all the ENS servers to it, along with the "SGD Broker" for dynamic launch.

  • Mac on Windows SMB Share- IDLK files disappearing allowing several users to access the same file

    Hi,
    We have a volume licensing agreement with Adobe and have around 16 Adobe CS6 licenses all used on Macs. The network is based around Windows servers and shares which the Macs connect to via an SMB connection to the server. The issue we're having is that when an InDesign file is opened, sometimes it will not create an IDLK file (or sometimes it will create one but it will disappear seconds later) and it allows several people to view the same file at the same time. Obviously two or more people working on the same file can, will and has caused issues with overwriting documents without knowledge of doing so.
    Has anyone else encountered this or have any ideas as to what might help us resolve this issue?
    Thanks

    When you open a file from a previous version (you'll see converted in
    the file name) there is no CS6 file in existence, yet. Once the file is
    saved as a CS6 file, the lock file is created. The whole procedure is
    designed so that you must make a fully conscious decision to overwrite
    the old version file with a new one.
    This is no different than creating a new document that hasn't been saved
    yet.

  • Multiple instances of WL on the same box :several Ip addresses using the same port

    Hi all,
    I want to set up several instances of WL on the same server. These
    instances will be clustered.
    I am using Apache for the WebServer.
    Here the configuration I used:
    I first change the weblogic.conf file in Apache to set up the bridge.I
    restart apache using apachectl.
    Then, on the WebLogic site, I created a new ipadress using ifconfig
    hme0:1 ip adress ...
    I created a file hostname.hme0:1 in /etc
    I added this Ip address in /etc/hosts.
    I added this Ip address in the mycluster DNS.
    I wanted to start both WL manually using startWebLogic.sh file to see
    the log file.
    So, I first assign hostname to WL1. Then start WL.
    I opened an other terminal. Assign the hostname to WL2. Then start using
    startWebLogic.sh.
    The first instance started correctly.When the second started, there was
    an error: when listening to the port 7001, this port was already used.
    That was the same with the port 7002.
    Then , my question is How is it possible to configure several instances
    on the same machine using several ip addresses and one port.
    Thank you for your help.
    Erwan

              Please try -Dweblogic.system.bindAddr=<a.b.c.d> in your startWebLogic.sh.
              Brian
              "Merg" <[email protected]> wrote:
              >> Then , my question is How is it possible to configure
              >> several instances on the same machine using several
              >ip
              >> addresses and one port. Thank you for your help. Eourwan
              >
              >On Win2K/WinNT you can assign several IP adresses to you
              >NIC. (Advanced
              >TCP/IP options.) Each server instance has to run on it's
              >own port.
              >
              >Regards,
              >Merg
              >
              >
              

  • Several JDK:s on the same computer?

    Is it possible to run several JDK�s on the same machine (and JRE�s)?
    I have this problem: I�m doing some J2ME development, but JDK 1.5 does not seem to be supported at least with MIDP 1.03 (or vice versa...). So, in order to be able to do J2ME development with MIDP 1.03 I need to install JDK 1.42, in other words downgrade from JDK 1.5. On the other hand, I need 1.5 for some "normal" programming for the pc. Also I would like to run the newest JRE plugin for the browsers.
    So, can I install both 1.42 and 1.5 JDK�s on the same machine, as well as both JRE�s 1.42 and 1.5? Will this cause problems and conflicts?
    If this is possible, how should I set up the installations so that the browsers would use the newest version of JRE, and so that pc development would use the 1.5 version, and finally the J2ME development would use the 1.42 version?
    Thanks in advance,
    Tomi

    Yes, you can have both.
    First, whichever one you want to be 'default' (the JRE you want the browser to use), you should install second. So, for instance, you want the browser to use the 5.0 JRE, so you would install Java 1.4.2, then Java 5.0. The you would make sure that your OS' PATH variable includes that version's bin directory (both JRE and JDK).
    Now, when you are doing J2ME developement, or other actions that need to use 1.4.2, you will have to specify the bin directory for the 1.4.2 directly. For example, run the program with:
    c:\java\jre1.4.2\bin\java -cp ... ...
    and the same for compiling:
    c:\java\jdk1.4.2\bin\javac -cp ... ...
    I am not particularly sure how to set the compiler to use for J2ME, if you find problems doing this, then try to reverse just the order of the JDK install:
    Install JDK5.0 first, then JDK 1.4.2, set the JDK 1.4.2 as the JAVA_HOME and inside the PATH.
    But keep the JRE5.0 as the default runtime.

  • I have an iPod touch that is synced with my library.  I just got a new Nano and I want to sync that with the same library but I can't figure out to do it with iTunes 11

    I have an iPod touch that is synced with my library.  I just got a new Nano and I want to sync that with the same library but I can't figure out to do it with iTunes 11

    I watched the new itunes tutorial, and if you double click on the  blank part of the bar that says music, videos, apps, etc, a button will show with your ipod's name.

  • When I try to access a web page or link from a web page I receive an error message like "Server not found" or "Unable to connect." After repeated "try again" attempts the page will load, but when I click on a button or link, the same thing repeats. Why?

    When I try to access any web page or any link from a web page, I receive an error message such as "Server not found" or "Unable to connect." After repeated "try again" attempts that the page will load, but as soon as I click on a button or link, the same thing repeats. Any suggestions?

    When I try to access any web page or any link from a web page, I receive an error message such as "Server not found" or "Unable to connect." After repeated "try again" attempts that the page will load, but as soon as I click on a button or link, the same thing repeats. Any suggestions?

  • Quite sometime ago, I attempted to download 2 episodes of Criminal Minds tv show.  It downloaded for 2 days before I realized it.   I stopped it and tried to delete both downloads after several more efforts with the same result.   Every time I purchase AN

    Some time ago, I attempted to download 2 episodes of Criminal Minds tv show.  It downloaded for 2 days before I realized it.  I stopped and tried to delete both episodes after several more efforts with the same result.  Every time I ANYTHING now, those same two episodes show up again and start to download again!   I can't make them go away!   I have successfully deleted songs and audiobooks over the last year, but these tv shows won't stop downloading and delete.  Any suggestions.    Thanks - danafromcripplecreek.

    Why start a new and very similar thread to your other one which you have not responded to (have you read the replies?)
    I suggest that no response is made to this duplicate thread. 

  • Deploying application with several web modules having the same context root

    Hi,
    I would like to be able to deploy an application in Weblogic 12c having one ejb module and several web modules with the same context root. Even though the web modules have the same context root, each of them is deployed to a different virtual host.
    Weblogic allows deploying the modules this way as long as their targets are different (i.e. each having a distinct virtual host). However this works only when I don't select a target for the .ear:
    Component Type Current Targets
    application.ear Enterprise Application (None specified)
    application.jar EJB AdminServer
    web1.war WEBAPP virtualHost1
    web2.war WEBAPP virtualHost2
    However if I select as target for the .ear to be AdminServer, the deployment doesn't work anymore, complaining that the context roots are in conflict.
    If I remove web2.war from the .ear and deploy the .ear and .jar to AdminServer and web1.war to virtualHost1, the deployment works but the strange thing is that the web application can be accessed also through the AdminServer's main network channel, even though I would expect that it should be accessible only through virtualHost1 network channel. I believe this is the reason why there are context root conflicts when specifying a target for the .ear, because both wars are made accessible to the main network channel.
    The reason why I want to keep the wars inside the same .ear is because I want to make them access the application's local EJBs (since as far as I know it's not possible to access a local EJB outside the application even if they belong to the same VM).
    Is there a way to deploy the web modules only to the virtual hosts without being targeted to the main network channel?
    Regards,
    Alexandru

    Murphy's Law: If anything can go wrong it will
    A corollary to Murphy's law: When everything fails, read the manual.
    Web application funda: Every web application must have its own context root. So, if wkfsocos is one
    web application then, wkfsocos1 is another web application -
    and hence must have its own context root.
    Hello Aman,
    If you are in E-Commerce version 4.0, then read this
    [ISA_Buildtool document |https://service.sap.com/~sapdownload/011000358700001920472003E/ISA_BuildTool_10.pdf]
    to create a copy of the application in its own context root.
    From your URL pattern I guess you are in E-Commerce version 4.0.
    If you are in E-Commerce 5.0 or above, then the
    [Extension Guide |http://service.sap.com/~sapdownload/011000358700006120622006E/]gives steps to create a copy with its own context root for use in modification.
    (See the chapter on - Creating a project specific Web Application with own context root )
    Both these links require access to SAP Service Marketplace. You can also find the
    documents through /instguides shortcut in Service Marketplace.
    Easwar Ram
    http://www.parxlns.com

Maybe you are looking for