Several crazy bugs LP7/MBPro and apogee rosetta800
several wierd things:
all the following happens randomly in mid session after stuff "worked fine just a second ago"... so its not a problems with my settings...
- after working fine, punch on the fly do not record any signal although the input shows signal coming in. normal record(not by punching on the fly) still works fine.
(this issue happens only with certain tracks- not all, which makes it even more strange...).
- inputs 5-8 gives a message "invalid input setting". again, it worked just fine a second ago...
- inputs mixed up.for example, input 4 suddenly records signal that is actually coming from input 3.
- in a middle of a session suddenly a serious latency is introduced if monitoring through software. again, has nothing to do with buffer. it happens all of a sudden after it worked just fine a second ago...
im using macbook pro 2g. are these machines usable yet...? never had that problem on my G4.
thanks,
Rea.
macbook pro 2G Mac OS X (10.4.3)
are you sure you're working with at least logic 7.2 or later? earlier versions are not intel compatible and will behave very strangely, if they work at all.
otherwise, in general - yes, these machines are doing just fine with logic. apart from one or two intel specific bugs (export audio to movie doesn't work, for example), it's all working fantastically well here.
Similar Messages
-
Nokia 5320 XM firmware bugs concerning date and al...
Hello!
Although already having twice sent in my Nokia 5320 XpressMusic for repair, I'm still suffering from severe firmware bugs concerning date and alarm of the device. Here some information on when and how the bugs are showing themselves:
Settings: A different weekly alarm is programmed for each day of the week. The phone is being switched off for the night.
The programmed alarm is being run correctly by the phone. The phone is being switched on after having disabled the alarm.
Some time later the date changes to four or five days in the future. Moreover the phone starts to ring for the day the date has changed to. Often it's not ringing at the time that has been programmed for that day, even though pretending to do so.
Example:
9:45 on Sunday: phone is correctly ringing at the programmed time.
10:15 on Sunday: phone is incorrectly ringing again pretending it was Friday 7:50
the clock remains unchanged, however the date has changed automatically for five days
Linked to this error, there seem to exist similar problems with date and snooze-function already mentioned on these forums:
/discussions/board/message?board.id=smartphones&message.id=145323
/discussions/board/message?board.id=smartphones&message.id=144139
/discussions/board/message?board.id=smartphones&message.id=143893
As I mentioned above, I already sent my phone in twice, however I always got it back with the mention: repaired on guarantee. To me, this seems rather disgraceful for Nokia. I sincerely hope, that, if necessary with the pressure of other users being concerned as well, we arrive to get a phone that is really working as one could await it from the leader in mobile phone production!
I hope we will be informed soon about when there will be a firmware update!
Thanks for your replies!
Regards,
LorenzHave the same problem, as I already mentioned in my posts too. But unfortunatly no reply from Nokia either. Seems they really don't care about it. It would be at least apropriate, that they at least announce time of new firmware and note if they will fix this problem with it.
But no replay from them I contacted local nokia dealer in Slovenia, but they just say they can not help. And that we must wait for new firmware.
Now I wonder, when it should came out ?! I am sick of this trouble with my phone. and as you said, I am also turning off my phone since I want my battery to last longer. so this bug must be fixed.
Nokia team, anyone?!?!? -
Revision: 10131
Author: [email protected]
Date: 2009-09-10 14:25:42 -0700 (Thu, 10 Sep 2009)
Log Message:
Fixes to several effects bugs and one styles-related bug.
QE notes: Fixes to all filed auto-center feature bugs.
Doc notes: None
Bugs: sdk-22994, sdk-22992, sdk-22990, sdk-21850, sdk-22973
Reviewer: Jason (+Glenn for RadioButton/CheckBox changes, 21850)
Tests run: checkintests, Mustella (transform effects, Slider, DataGrid - all passed last week, prior to skin/test changes)
Is noteworthy for integration: No
Ticket Links:
http://bugs.adobe.com/jira/browse/sdk-22994
http://bugs.adobe.com/jira/browse/sdk-22992
http://bugs.adobe.com/jira/browse/sdk-22990
http://bugs.adobe.com/jira/browse/sdk-21850
http://bugs.adobe.com/jira/browse/sdk-22973
Modified Paths:
flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/CheckBox.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/RadioButton.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/core/UIComponent.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/effectClasses/SoundEffectInst ance.as
flex/sdk/trunk/frameworks/projects/spark/src/spark/effects/AnimateTransform.as
flex/sdk/trunk/frameworks/projects/spark/src/spark/effects/Move.as
flex/sdk/trunk/frameworks/projects/spark/src/spark/effects/Move3D.as
flex/sdk/trunk/frameworks/projects/spark/src/spark/effects/Rotate.as
flex/sdk/trunk/frameworks/projects/spark/src/spark/effects/Rotate3D.as
flex/sdk/trunk/frameworks/projects/spark/src/spark/effects/Scale.as
flex/sdk/trunk/frameworks/projects/spark/src/spark/effects/Scale3D.as
flex/sdk/trunk/frameworks/projects/spark/src/spark/effects/supportClasses/AnimateTransfor mInstance.as
flex/sdk/trunk/frameworks/projects/spark/src/spark/primitives/supportClasses/GraphicEleme nt.as
flex/sdk/trunk/tools/dependencychecker/frameworkSwcExceptionsList.txt -
in a document with several sections, in section VIII and IX one cannot select the text of the page foot nor set the pointer in it; so, one cannot write nor change the page foot text. Please help!
Question already asked and answered several times.
It's a bug striking in long documents.
Select a word somewhere higher in the page then use the arrows to reach the wanted insertion point.
Yvan KOENIG (VALLAURIS, France) mardi 23 août 2011 15:44:24
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.0
My iDisk is : <http://public.me.com/koenigyvan>
Please :
Search for questions similar to your own
before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer ! -
MBPro and monitor not staying asleep; new problem
Suddenly my new MBPro and its 24" monitor won't stay asleep!.
I ordinarily use the 24" monitor, leaving lid on my MBPro shut.
At night, I choose 'sleep" from the Apple menu and the mac and monitor sleep.
Suddenly, past couple of days, when I do this,
-monitor sleeps and then within seconds it pops awake
-If I raise the lid of my MBPro, the monitor of the laptop is black, does not come up until I use Software preferences to "detect display"
-only way I can keep both monitor and mac asleep is if I leave the lid of my MBPro up, then choose sleep, then the mac and monitor rest.
I suspect one of the recent sofware updates may be doing this.
Anyone else experiencing this?
Should I reset the PMU on the monitor?
(Does anyone know the precise steps todo this; I know about removing the battery and holding power key for 5 seconds but have been given different advice on removing power cord or not)I've got a very the similar problem. Brand new iMac 24" that shipped with Leopard -- my first Mac after jumping ship fom the Windoze side.
I had iTunes updating it's album artwork and since it was taking a while, I went to bed. When I turned out my light, I realized the screen had not yet gone to sleep (a good 15 minutes after it should have). So I set up a Hot Corner to put the display to sleep. When I put the mouse there, the monitor would go to sleep, but wake up within 10 seconds. At first I thought it was just the mouse moving as I walked away, but it wasn't.
I ended up turning the computer off because the big beautiful screen was throwing too much light. Since, I rarely turn my computers off and they're usually doing SOMETHING, this is really annoying.
Admittedly, I haven't tried some othe the potential solutions above, but this has to be the same bug. Screen saver stays on, monitor comes out of sleep.
Any help would be.....well.....helpful.
Ian -
Where does NI hide the full list of bug fixes? and why is it hidden from users?
So I get an enticing email begging me to try the august 2009 release of LabVIEW. Ok. I'm twitching with anticipation. I'd like to know if several specific bugs are fixed in a new release of a specific module, however. Otherwise I'd prefer to install it some other time when I'm not busy writing dlls to compensate for the bugs that I hope are now fixed. I've been clicking in circles on the NI website trying to find complete information regarding changes and as is entirely far too typical of NI, I only have access to an anemic, watered down version of what should be proper documentation.
"LabVIEW Readme—Use this file to learn
important last-minute information about LabVIEW, including installation
and upgrade issues, compatibility issues, a partial list of bugs fixed
in the current version of LabVIEW... bla bla bla"
Where is the full list of bug fixes? I don't care if it isn't spellchecked or if it's sloppy; I just want the information. The readme you provide for the specific module I'm interested in is ridiculously small. I know darned well you must have changed more than what is listed. So what secret vault do I have to burgle to find the full list of bug fixes? Am I just missing an obvious hyperlink?
- mushroomed
Message Edited by Root Canal on 08-11-2009 11:29 AM
global variables make robots angryRoot Canal wrote:
Where is the full list of bug fixes? ...
They are locked-up in the Ivory Tower.
I have been a LabVIEW Champion for about four years and even after signing NDA's I still can't see the full list.
Seruously, the full list includes probably millions of bugs that NI finds internally before you and I ever see it.
The best way to handle your situation is to track the CAR's for your bugs. You can call NI support with the CAR number and they can tell you if the bug was fixed and in which version you will find the fix.
If it has not been fixed you can contact you rlocal NI rep and ask them to look into it for you. They may be able to tell you in which release the fix is scheduled and bump up the priority of the fix if you make a good arguement.
Just trying to help,
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction -
we have several iphones in the family and want to share music. do we need to have everyone on same account?
You will all need to be on the same itunes account ID.
You can however all have seperate icloud accounts aswel. -
basically yeah, I updated my software because it said that iOS 7.0.1 was out as a bug fixes update and now my phone constantly glitches the **** out, its super slow, and it pretty much created more bugs than it did fix them. So how can I go back to iOS 7? because 7.0.1 is an absolute nightmare.
Try updating to iOS 7.0.2.
Does your iPhone still have performance issues? Have you tried the basics? -
Our family has several apple devices, iPad, touch, and now iMac, our original iTunes are all under a different apple id. do we keep our own accounts even in cloud? do we all have access to each others media? (First time out with all this..)
There is no problem about using one ID for iTunes, iTunes in the Cloud and iTunes Match, and another for iCloud and its email and syncing facilities. This way you can all use the same iTunes account but have separate emails and calendars etc.
-
I purchased a season of a TV show from itunes and it won't go onto my ipad, i've purchased several seasons in the past and never had this issue, how can i fix this?
Drew how is that even possible? I use gift cards all the time, any time I've had insufficient funds iTunes will not allow the purchase, sights Insufficient funds and rejects the purchase. Any time I log into my account the money in that account appears in the upper left corner. If you're not seeing that then you have other issues. Anyway... Kneil is right you should be able to rip CDs you own to your iTunes library (regardless of your money matters with iTunes), then depending on how you set up the music you need to add it to your playlist and then sync it to your iPod. Did imported music ever work? How are you ripping or importing the music to iTunes? Are you using a compatible format?
Something else to look at-- It's possible your cable is defective, have you tried a new or different cable? Some of what your describing is a bad cable issue. Good luck, Cheers. -
Firefox no longer connects to internet on my mac, and windows machines, after v18. I've tried several solutions from Mozilla support and nothing works. Firefox can't even connect to Mozilla for updates. Firefox just sits on the default search page and attempts to connect to websites by typing URLs, or by clicking on the links on the default search page don't work.
You could try the following:
* Make sure your Internet security software is up-to-date (i.e. you are running the latest version)
* Remove Firefox from your program's list of trusted or recognized programs, then add it back. For detailed instructions, see Configure firewalls so that Firefox can access the Internet.
Let us know if this fixed your problem! -
I have had several computers in recent years and when i try to sync my iphone and ipad to my new computer, it says it cant because the devices are registered on too many computers. I only need them synced up to two computers - how do i fix this?
In iTunes, under the "Store" menu, you can select "Deauthorize this computer". That will remove that computer from your iTunes account and free up a spot for the new computer.
If you have already sold or wiped your previous computers, you can log into your iTunes account from the Store menu in iTunes by selecting "View My Account xxxx@xxxx". Once you are logged in, about 1/4 the way down the page it will tell you that you have "xx computers are authorized......". Beside that you have the option to deauthorize all of the connected devices. That is the only option, you will have to deauthorize all and then set up the ones you want to use.
I think 10 is the maximum number of devices that can sync to one iTunes account. -
Bug in copy and past in nokia n97 fw 21.0.045 prod...
bug in copy and past in nokia n97 fw 21.0.045 product code: 0575743
the bug
iam make phone number in notes
then copy the number
when go to
contact and then past it the number not past ?
copy number from notes to contact not work !Copy and Paste from Notepad to Contacts works fine here. Try rebooting your handset.
Nokia N8 on O2-UK
Firmware 022.014 -
Compiler bug with generics and private inner classes
There appears to be a bug in the sun java compiler. This problem was reported against eclipse and the developers their concluded that it must be a problem with javac.
Idea also seems to compile the example below. I couldn't find a bug report in the sun bug database. Can somebody tell me if this is a bug in javac and if there is a bug report for it.
https://bugs.eclipse.org/bugs/show_bug.cgi?id=185422
public class Foo <T>{
private T myT;
public T getT() {
return myT;
public void setT(T aT) {
myT = aT;
public class Bar extends Foo<Bar.Baz> {
public static void main(String[] args) {
Bar myBar = new Bar();
myBar.setT(new Baz());
System.out.println(myBar.getT().toString());
private static class Baz {
@Override
public String toString() {
return "Baz";
Eclipse compiles and runs the code even though the Baz inner class is private.
javac reports:
Bar.java:1: Bar.Baz has private access in Bar
public class Bar extends Foo<Bar.Baz>
^
1 errorAs I said in my original post its not just eclipse that thinks the code snippet is compilable. IntelliJ Idea also parses it without complaining. I haven't looked at the java language spec but intuitively I see no reason why the code should not compile. I don't think eclipse submitting bug reports to sun has anything to do with courage. I would guess they just couldn't be bothered.
-
HOW TO CREATE SEVERAL folder for the generation and READING FILE
HOW TO CREATE SEVERAL folder for the generation and READING FILE WITH THE COMMAND utl_File.
please give an example to create 3 folders or directories ...
I appreciate your attention ...
Reynel Martinez SalazarI hope this link help you.
[http://www.adp-gmbh.ch/ora/sql/create_directory.html]
create or replace directory exp_dir as '/tmp';
grant read, write on directory exp_dir to eygle;
SQL> create or replace directory UTL_FILE_DIR as '/opt/oracle/utl_file';
Directory created.
SQL> declare
2 fhandle utl_file.file_type;
3 begin
4 fhandle := utl_file.fopen('UTL_FILE_DIR', 'example.txt', 'w');
5 utl_file.put_line(fhandle , 'eygle test write one');
6 utl_file.put_line(fhandle , 'eygle test write two');
7 utl_file.fclose(fhandle);
8 end;
9 /
PL/SQL procedure successfully completed.
SQL> !
[oracle@jumper 9.2.0]$ more /opt/oracle/utl_file/example.txt
eygle test write one
eygle test write two
[oracle@jumper 9.2.0]$
SQL> declare
2 fhandle utl_file.file_type;
3 fp_buffer varchar2(4000);
4 begin
5 fhandle := utl_file.fopen ('UTL_FILE_DIR','example.txt', 'R');
6
7 utl_file.get_line (fhandle , fp_buffer );
8 dbms_output.put_line(fp_buffer );
9 utl_file.get_line (fhandle , fp_buffer );
10 dbms_output.put_line(fp_buffer );
11 utl_file.fclose(fhandle);
12 end;
13 /
eygle test write one
eygle test write two
PL/SQL procedure successfully completed.
SQL> select * from dba_directories;
OWNER DIRECTORY_NAME DIRECTORY_PATH
SYS UTL_FILE_DIR /opt/oracle/utl_file
SYS BDUMP_DIR /opt/oracle/admin/conner/bdump
SYS EXP_DIR /opt/oracle/utl_file
SQL> drop directory exp_dir;
Directory dropped
SQL> select * from dba_directories;
OWNER DIRECTORY_NAME DIRECTORY_PATH
SYS UTL_FILE_DIR /opt/oracle/utl_file
SYS BDUMP_DIR /opt/oracle/admin/conner/bdumpRegards salim.
Edited by: Salim Chelabi on Apr 4, 2009 4:33 PM
Maybe you are looking for
-
Must have done something wrong.. 1. formatted external disk to Mac OS Extended (Journaled) - required a partition, but that went fine. Entire new external disk was included in the partition formatted to Mac OS Extneded (journaled). 2. moved iPhoto
-
Have 2 Win 8 machines, running Firefox 25 and one lap top with Win 7. All three are using Mcafee Security Suite ver 12.8 with Anti Virus 16.8. The subscription runs out in February 2014. I would like to make a change and am concerned about compatibil
-
Host command through java stored procedure
Hi All, Im trying to execute the winword command to open a MSWord document, print & exit the document, through dos prompt, from client pc to the default printer, through java stored procedure oracle pl/sql forms. How can achieve this? Kindly help. rg
-
How to assign a person to work center
Hi All, Can you please let me know how to assign a person to work center? Regards, Nima
-
Related to MVC framework(struts)
Hi all Friends i am having a small application which i had developed in servlets and jsp ... The problem is comming when i have to implement in struts.. means I am having 1>> 15 Servlet classes 2>>10 Jsp's 3>>7 UserServices class (BussinessLogic clas