Several devices do not work on Satellite A200-FL1 PSEA6 with XP SP2

I am owner of a Satellite A200-fl, I have deleted Vista and successfully instaled XP SP2. However the computer is working, I have several problems after instaling Toshiba drivers (Spanish) found in download section.
1st. No sound hardware is found, I have tried the following drivers: *Native Windows XP SP2 drivers, Realtek Semiconductor Corporation Windows XP 1.69, Realtek Semiconductor Corporation Windows XP 5.10.0.5440*
2nd. Modem is not found, I have tried the following driver: *Toshiba Windows XP SM2177ALD04*
3rd. Bluetooth is not working, I have tried the following driver: *Toshiba Windows XP 3.01*
4th. In hardware tree, there are two PCI devices not properly installed, I dont know what they are.
5th Hotkeys are not working, I have tried the following driver: *Toshiba Windows XP 0.48.2.1.C*
I have to say that I have followed Toshiba installation instructions, and used Toshiba official drivers only, but there is no way I can solve it, I feel really upset and fed up with this situation.
null

> Anyone knows about how to solve sound problem?
1) start with a clean XP installtion etc...
2) Install Chipset & graphic driver and some other drivers
3) Installed Microsoft *KB888111* hotfix
4) Install a windows XP Update
5) Install sound driver
For more details check this thread:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=26856
Good luck

Similar Messages

DVD drive is not working on Satellite A200-1S5

After installing vista the dvd unit is not reading any disk until reboot. To be more specific, from the first moment I purchased the notebook I try to install ms works from disk but the unit was not reading.
I observed that if the disk was in the unit before the operating system started the unit was reading the disk. If I open the dvd unit and I close the unit (with the same disk inside) I have the message to insert a disk into drive and the message remained until I restart the operating system.
I have tried to recover the operating system with the DVD it came to but after install I had the same problem. I have tried with another operating system , windows XP , with all drivers installed (BIOS inclusive) and the problem still remains. The notebook works very fine except the dvd drive.
Can anyone help me please?

Hi,
one suggestion which could avoid to send the machine to a repair center would be to check the Toshiba Drivers Download site for a "firmware" upgrade for your drive. If no one is available or the firmware does not help to resolve the problem then you should definitively send the machine to an authorised service partner since it could really be a hardware failure.
If you need a link to find the nearest service partner in your country then you should click [HERE|http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_whitepaper.jsp?service=EU&WHITEPAPER_ID=0 000000871] and phone an ASP for a hardware chckup/repair which is nearest to you.
Greets

Satellite U400-17R - Sound device is not working after installing XP

Hi there,
I purchased a U400-17R Model with Vista Home. i Formatted it and installed Windows XP Professional downloading the XP drivers from Toshiba site.
Everything works but my Sound Device is not working. when i check in the Device Manager the Sound Drivers are there and it says working properly.
I am Lost...Can anyone please help?

Hi!
On Windows XP you have to install two patches from the Microsoft Knowledge Base for high definition audio cards. If you only have SP1 or SP2 you need the patches but if you have SP3 you dont need it because they are a part of SP3.
Both patches or SP3 must be installed *first* and then the sound driver. So if you have installed the sound driver first you must remove it and then install the patches again. After this it should work with the sound:
http://support.microsoft.com/kb/835221
http://support.microsoft.com/kb/888111
Bye

Wireless conection do not work in Satellite R630-13U Code : PT31LE-00V006

Hi all
I have bought a new Satellite R630-13U Code : PT31LE-00V006CE two weeks ago. Problem is that I am not able to get connected to any Wireless network (neither open or encripted with WPA nor WEP).
In my laptop I got it with Windows 7 installed. I am able to see the wireless network icon next to the clock down right corner of the screen, also I am able to select one of the netwoks that the pc detects and show in the list. Then once I select the network it asks me for the password, and if I introduce a wrong password, I get the right error message.
Problem comes when I introduce the right password..... then after a couple of mins where I can see the "process bar" screen I get an error message that just says " Not able to connect to "WNetwork Name"".
As I said I have tried this with several networks open or with security and with both levels of security (WPA or WEP). I have tried this with different networks, with different routers, and in different places.... but never got a wifi connection with this new laptop.
I have tried uninstalling the broadcom adapter, and reinstalling it downloading the driver from the official toshiba web site, also I have installed the last version of the "Added Value Package".... but still is not working.
I have other friends with HP, o DELL that are using Windows 7 which are able to connect to the networks I am not , and with no problem..
What else should I try to get this fixed??
Thanks a lot

Hi all
Thanks a lot for the answer, but I dont think I have understood it correctly. What you mean is that I need to use the same encription that works with the router and with the Wireless card of the laptop (Broadcom).... but for me that would not be the right answer I need.
Imagine that this can be the solution, so we need to change the security settings of my home wifi network and of our office to the one being accepted by the laptop,..... but what happens if I need to go to a customer, or to a cafe.... Do I have to ask them to change the security settings???.... my other laptos (even toshiba's) works fine with other networks... routers.... why is this one not working?.
I have uninstalled the wifi card driver and installed it from the last one found in the toshiba's support site.... dont know really what else I should do.
Please any advice will be very pleased.
Regards

HT201413 Device does not work when I connect it to your computer to the iTunes program update requests and then gives me an error No. 21

Device does not work when I connect it to your computer to the iTunes program update requests and then gives me an error No. 21

Device does not work when I connect it to my computer to the iTunes program update requests and then gives me an error No. 21

TS4036 icloud backup to new device is not working as says I dont have enough storage, even although the backup is only 3GB out of my 5GB (giving more than 1GB available!)???

back up from icloud to new device is not working as it is saying that I dont have enough storage, when I am only trying to use 3GB out of my 5GB allowance???

I may misunderstand your post - you "backup TO icloud" or restore from icloud to a new device. Not sure which of these you mean.
If backing up TO icloud, the problem may be that there's not enough storage on your device, not icloud, as a device needs a good bit of storage to create the backup.
If restoring from icloud to a new device and you get the error, the storage referenced must be that on the device, although that doesn't seem possible, since a device has more memory than 5GB.

When I connect my ipod touch tomy computer it says that the device will not work because the Apple mobile device hasnt been activated?

Why does a meesage pop up when I connect my iPod touch saying that the device will not work because the Apple mobile device hasn't been activated?

Refer to this article to restart AMDS:
How to restart the Apple Mobile Device Service (AMDS) on Windows
http://support.apple.com/kb/TS1567

Windows reports that the "USB-IF xHCI USB Host Controller" device is not working properly.

I have been receiving the following error and instructions to fix it for a long time now, prior to updating to Windows 8.1:
A device is not working properly
Windows reports that the "USB-IF xHCI USB Host Controller" device is not working properly.
Recommended solution to the problemUse Windows Update to check whether new device drivers are available. Proceed as follows:
Open Device Manager
Search in the device manager for the device whose driver you would like to update and double-click on the device name. You may first have to enable the "Show hidden devices" entry in the "View" menu.
Switch to the Driver tab, click Update driver and follow the instructions
When I follow the instructions and try to update the driver, I am told "The best driver software for your device is already installed."
How do I update the driver to stop receiving the error?
This question was solved.
View Solution.

I have solved the initial problem.
I found the solution on the Forum at http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03926756&tmp_task=solveCategory&cc=us&dlc=en&la...

In the middel of updateing my IPod the connectione stopd and since then the device is not working. only white screen no connectivity to win or to the Appstore

In the middel of updateing my IPod the connectione stopd and since then the device is not working. only white screen no connectivity to win or to the Appstore

Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

Network adaters -BlackBerry Device not working in windows 8 when coinnected with usb cable

I was unable to find my plabook in the network or any mounted volume when I connect w8x64 pro to the playbook via usb cable despite the blackberry device manager is loaded on connection
in devce mgmt I found
Device Type: Network Adapters
Manufacturer: Research In Motion
location: 0000.001d.0007.005.000.000.000.000.000
Device Status:
This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)
------------------- Events Tab--------::
Driver Management concluded the process to install driver rimpb_rndis.inf_amd64_c255bed1a35b762a\rimpb_rndis.inf for Device Instance ID USB\VID_0FCA&PID_8012&MI_00\6&1EDEAF40&0&0000 with the following status: 0x0.
Driver Management has concluded the process to add Service usb_rndisx for Device Instance ID USB\VID_0FCA&PID_8012&MI_00\6&1EDEAF40&0&0000 with the following status: 0.
Driver Management concluded the process to install driver rimpb_rndis.inf_amd64_e3f4ab2c803293ee\rimpb_rndis.inf for Device Instance ID USB\VID_0FCA&PID_8012&MI_00\6&1EDEAF40&0&0000 with the following status: 0x0.
Driver Management has concluded the process to add Service usb_rndisx for Device Instance ID USB\VID_0FCA&PID_8012&MI_00\6&1EDEAF40&0&0000 with the following status: 0.
Driver version: 2.0.0.32
Itried to update the device but it's up to date
what Can I do?

hi Suman Shrestha,
Welcome to the Lenovo Forums.
Your issue might be similar to this thread.
Although this is for a Windows 7 machine, can you try the solution that was posted and see if the problem gets fixed.
Let me know your findings
Cheers
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Audio device is not working, i have installed proper drivers, but audio device is not working

hi,
I have installed registery mechanic last week and made a system run in my laptop. After re starting my laptop, my audio devices are not working fine. I have installed the drives correctly and they are reflecting in program lists, how ever the audio device is not working. If I am reinstalled the system, My audio device is working fine, I have installed a fresh OS, but sitll its not working fine, could you help me to fix this one.

Tecra A8
Model No = PTA83L-04C02N
Can you please tell me from where I need driver so that my "Fn" key will be operation? Right now I tried to use "Fn" with F6 and F7 which suppose to change screen resolutions but nothing is happening.
Can you please tell me if I reinstall New OS (Windows XP - Sp2) then in which order which driver and Toshiba software I should install?
Hard to find XP drivers and utilities for that machine, Manoj. But you're in luck because the Asian part-number family PTA83L corresponds to the European PTA83E.
Go to the European download site and look up the Tecra A8 with Short Model No. PTA83E. You'll find 40 XP drivers, utilities, and BIOS updates.
Install the Chip Set Utility first, then the Display Driver, and then the other major drivers. Install the Common Module prior to Toshiba utilities and other programs.
Good luck!
-Jerry

My audio device is not working

hello
I don't know the reasone behind it but my audio device is not working but I rember accedentally i uninstail my IDT audio device.

Hello rasfunkey,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that you have uninstalled your audio drivers and require assistance. I would be happy to assist you, but first I would encourage you to post your product number for your computer. I am linking an HP Support document below that will show you how to find your product number. As well, if you could indicate which operating system you are using. And whether your operating system is 32-bit or 64-bit as with this and the product number I can provide you with accurate information.
How Do I Find My Model Number or Product Number?
Which Windows operating system am I running?
Is the Windows Version on My Computer 32-bit or 64-bit?
Please re-post with the requested information and I would be happy to provide you with assistance. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Are mobile internet USB devices still not working on Snow Leopard?

Are mobile internet USB devices still not working on Snow Leopard? I actually had to go back to my previous operating system to get this to work. I would however prefer to use Snow Leopard...if Apple & HUAWEI have finally got their act together!

There appears to be a problem with drivers for USB wireless modems with 10.6. I upgraded from Leopard to Snow Leopard and now can't connect to the internet with my wireless modem. I hope Apple sort this out soon. Or maybe it's Huawei that needs to put a 10.6 driver into its software.

The apple mobile device is not working on the ipad. how can i fix it?

My apple mobile device is not working on my ipad and my itunes dosn't work now. How can I fix it?

Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

Bootcamp 3.2: Microsoft Virtual WiFi MiniPort Adapter shows "device is not working properly...Code 31"

Using Windows 7 Enterprise 64-bit, Microsoft Virtual WiFi Miniport Adapter shows the "device is not working properly because Windows cannot load the drivers required for this device. (Code 31).".The device is the Apple iMac10,1 All-in-one computer. Right clicking browse files (for the device) shows the Bootcamp (C:), DVD (D:); and my external hard drives can be selected.
Internet and WiFi connections all working ok. Am also running MacDrive 8 to access the Mac drives when in the Windows partition, again without any seeming issues.
Updating the driver simply generates another Code 31 error.
Appreciate this seems to be a known problem - is the a solution a novice use might be able to follow or should I simply ignore the error message?
Driver Date us 21/06/2006 and Driver Version is 6.1.7600.16385.

Hi ,
Thank you for visiting the HP Support Forums and Welcome. It is a great site for information and questions. I have looked into your issue about your HP ENVY 4-1204tx Ultrabook and issues with WiFi adapter is not working properly. Error codes in Device Manager in Windows 8.1 could be fixed by deleting any extra drivers. So I would uninstall all that is listed in the Network drivers in the Device Manager, restart the Notebook. Here is a list of Device Manager options, this might help.
Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system that need updating or reinstalling. Hope this helps. Thanks.

Several devices do not work on Satellite A200-FL1 PSEA6 with XP SP2

Similar Messages

Maybe you are looking for