Several errors after upgrade

Hi everyone, i have several questions for some errors that appeared with the last full system upgrade:
1. There is some message i get in the "waiting for udev events to be processed" part of the boot process: SP5100 TCO timer: mmio address [some memory address] alredy in use.
2. Various other messages after the loading of the daemons i can't get to read. (Where those logs are stored?)
3. I have KDE 4.7 and Xorg 1.10 with kwin composite. When i bring the command laucher (alt+f2) and look for some buggy graphics appear before showing the results.
I can downgrade Xorg to fix the third problem, but for the other ones...
Xorg logs seems ok, and the boot log too.
Thanks in advance.

I do have a problem. While starting Xorg, the synaptics module can't be loaded. Here's the Xorg log:
[ 12.914] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event9)
[ 12.915] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 12.915] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 12.915] (II) LoadModule: "synaptics"
[ 12.915] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 12.928] (II) Module synaptics: vendor="X.Org Foundation"
[ 12.928] compiled for 1.10.2, module version = 1.4.0
[ 12.928] Module class: X.Org XInput Driver
[ 12.928] ABI class: X.Org XInput driver, version 12.2
[ 12.928] (EE) module ABI major version (12) doesn't match the server's version (11)
[ 12.928] (II) UnloadModule: "synaptics"
[ 12.928] (II) Unloading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 12.928] (EE) Failed to load module "synaptics" (module requirement mismatch, 0)
[ 12.928] (EE) No input driver matching `synaptics'
[ 12.929] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 12.929] (II) No input driver/identifier specified (ignoring)
[ 12.929] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[ 12.929] (II) No input driver/identifier specified (ignoring)
This is what i updated:
[2011-08-05 11:49] installed libglapi (7.11-1)
[2011-08-05 11:49] upgraded libgl (7.10.1-1 -> 7.11-1)
[2011-08-05 11:49] upgraded ati-dri (7.10.1-1 -> 7.11-1)
[2011-08-05 11:49] upgraded dialog (1.1_20110302-1 -> 1.1_20110707-1)
[2011-08-05 11:49] upgraded file (5.07-4 -> 5.08-1)
[2011-08-05 11:49] upgraded keyutils (1.4-1 -> 1.5.2-1)
[2011-08-05 11:49] upgraded libcap (2.21-1 -> 2.22-1)
[2011-08-05 11:49] upgraded libvpx (0.9.6-2 -> 0.9.7-1)
[2011-08-05 11:49] upgraded mime-types (1.0-3 -> 8-1)
[2011-08-05 11:49] upgraded smbclient (3.5.10-1 -> 3.5.11-1)
[2011-08-05 11:49] upgraded usbmuxd (1.0.7-1 -> 1.0.7-2)
[2011-08-05 11:49] upgraded xf86-input-evdev (2.6.0-2 -> 2.6.0-3)
[2011-08-05 11:49] upgraded xf86-input-synaptics (1.4.0-1 -> 1.4.1-1)
[2011-08-05 11:49] upgraded xf86-video-ati (6.14.0-2 -> 6.14.2-1)
[2011-08-05 11:49] upgraded xf86-video-fbdev (0.4.2-3 -> 0.4.2-4)
[2011-08-05 11:49] upgraded xf86-video-vesa (2.3.0-4 -> 2.3.0-5)
[2011-08-05 11:49] upgraded xorg-iceauth (1.0.4-2 -> 1.0.5-1)
[2011-08-05 11:49] upgraded xorg-mkfontscale (1.0.8-1 -> 1.0.9-1)
[2011-08-05 11:49] upgraded xorg-xkbcomp (1.2.1-2 -> 1.2.3-1)
[2011-08-05 11:49] upgraded xorg-server-common (1.9.4.901-1 -> 1.10.3-2)
[2011-08-05 11:49] upgraded xorg-server (1.9.4.901-1 -> 1.10.3-2)
[2011-08-05 11:49] upgraded xorg-xauth (1.0.5-2 -> 1.0.6-1)
[2011-08-05 11:49] upgraded xorg-xlsclients (1.1.1-2 -> 1.1.2-1)
[2011-08-05 11:49] upgraded xorg-xprop (1.2.0-2 -> 1.2.1-1)
[2011-08-05 11:49] upgraded xorg-xrandr (1.3.4-2 -> 1.3.5-1)
[2011-08-05 11:49] upgraded xorg-xset (1.2.1-2 -> 1.2.2-1)
[2011-08-05 11:49] upgraded xorg-xwininfo (1.1.1-2 -> 1.1.2-1)
[2011-08-05 12:26] Running 'pacman -U xorg-iceauth-1.0.4-2-i686.pkg.tar.xz xorg-mkfontscale-1.0.8-1-i686.pkg.tar.xz xorg-server-1.9.4.901-1-i686.pkg.tar.xz xorg-server-common-1.9.4.901-1-i686.pkg.tar.xz xorg-xauth-1.0.5-2-i686.pkg.tar.xz xorg-xkbcomp-1.2.1-2-i686.pkg.tar.xz xorg-xlsclients-1.1.1-2-i686.pkg.tar.xz xorg-xprop-1.2.0-2-i686.pkg.tar.xz xorg-xrandr-1.3.4-2-i686.pkg.tar.xz xorg-xset-1.2.1-2-i686.pkg.tar.xz xorg-xwininfo-1.1.1-2-i686.pkg.tar.xz ati-dri-7.10.1-1-i686.pkg.tar.xz dri2proto-2.3-1-any.pkg.tar.xz gpgme-1.3.0-1-i686.pkg.tar.xz initscripts-2011.06.4-1-i686.pkg.tar.xz libdrm-2.4.25-1-i686.pkg.tar.xz libgl-7.10.1-1-i686.pkg.tar.xz udev-171-2-i686.pkg.tar.xz xf86-input-evdev-2.6.0-2-i686.pkg.tar.xz xf86-input-synaptics-1.4.0.901-1-i686.pkg.tar.xz xf86-video-ati-6.14.0-2-i686.pkg.tar.xz xf86-video-fbdev-0.4.2-3-i686.pkg.tar.xz xf86-video-vesa-2.3.0-4-i686.pkg.tar.xz'
[2011-08-05 12:26] upgraded xorg-iceauth (1.0.5-1 -> 1.0.4-2)
[2011-08-05 12:26] upgraded xorg-mkfontscale (1.0.9-1 -> 1.0.8-1)
[2011-08-05 12:26] upgraded udev (173-3 -> 171-2)
[2011-08-05 12:26] upgraded libdrm (2.4.26-1 -> 2.4.25-1)
[2011-08-05 12:26] upgraded xorg-xkbcomp (1.2.3-1 -> 1.2.1-2)
[2011-08-05 12:26] upgraded xorg-server-common (1.10.3-2 -> 1.9.4.901-1)
[2011-08-05 12:26] upgraded xf86-input-evdev (2.6.0-3 -> 2.6.0-2)
[2011-08-05 12:26] upgraded xorg-server (1.10.3-2 -> 1.9.4.901-1)
[2011-08-05 12:26] upgraded xorg-xauth (1.0.6-1 -> 1.0.5-2)
[2011-08-05 12:26] upgraded xorg-xlsclients (1.1.2-1 -> 1.1.1-2)
[2011-08-05 12:26] upgraded xorg-xprop (1.2.1-1 -> 1.2.0-2)
[2011-08-05 12:26] upgraded xorg-xrandr (1.3.5-1 -> 1.3.4-2)
[2011-08-05 12:26] upgraded xorg-xset (1.2.2-1 -> 1.2.1-2)
[2011-08-05 12:26] upgraded xorg-xwininfo (1.1.2-1 -> 1.1.1-2)
[2011-08-05 12:26] upgraded libgl (7.11-1 -> 7.10.1-1)
[2011-08-05 12:26] upgraded ati-dri (7.11-1 -> 7.10.1-1)
[2011-08-05 12:26] upgraded dri2proto (2.6-1 -> 2.3-1)
[2011-08-05 12:26] upgraded gpgme (1.3.1-1 -> 1.3.0-1)
[2011-08-05 12:26] warning: /etc/rc.conf installed as /etc/rc.conf.pacnew
[2011-08-05 12:26] upgraded initscripts (2011.07.3-1 -> 2011.06.4-1)
[2011-08-05 12:26] upgraded xf86-input-synaptics (1.4.1-1 -> 1.4.0.901-1)
[2011-08-05 12:26] upgraded xf86-video-ati (6.14.2-1 -> 6.14.0-2)
[2011-08-05 12:26] upgraded xf86-video-fbdev (0.4.2-4 -> 0.4.2-3)
[2011-08-05 12:26] upgraded xf86-video-vesa (2.3.0-5 -> 2.3.0-4)
Thanks for the replies.
Last edited by Hyugga (2011-08-05 18:18:45)

Similar Messages

Time machine fails backing up with a "backup disk not found" error after upgrade to Lion 10.7.2

Time machine fails backing up with a "backup disk not found" error after upgrade to Lion 10.7.2. I've erased and reformatted the drive; reconnected Time Machine(it saw it) and began a new backup. The backup starts again but fails before completing with backup drive not found error. I used the 10.7.2 combo update. Any help on how to fix this problem would be appreciated.

Arghhhhhhhhhhhhhhhhhhh!!!!!!
After waiting since October for a fix, I have now upgraded the firmware on the Time Capsule and installed the new Airport Utility, released yesterday, and the situation is even worse.
Up until now, the Airport Utility had an option to disconnect all drives manually and the Time Capsule would then work until the next reboot – a temporary (?) work-around.
Now that option does not exist in the new-look Airport Utility. And the Airport Utility installation can’t be rolled back and the old utility won’t restore.
The sparesbundle is still not accessible. Anyone worked out a work-around in the new environment yet?
I have another Time Machine backup working fine to a trusty old Lacie Drive so erased the one on my Time Capsule to see if that works. I have renamed the Capsule and the Time Capsule Drive. But to build another full backup will take at least two days and I shall be away from tomorrow and am reluctant to leave the Capsule and computer up and running for a week. And I’ll bet the sparsbundle will still be nowhere to be found.
How can Apple screw up so badly when they are to become the richest company in the entire world and – soon – will have more cash in the bank than the entire United States? Can’t they afford someone who really can sort this out? Especially when a Firewire connected hard drive – my trusty and simple LaCie – works fine.
Words, almost, fail me.

Flash 9,0,124,0 security error after upgrade

I get the following error after upgrading my Flash Player
(after my system prompted me to install it while running the Flash
editor):
Internet Explorer has blocked this site from using an ActiveX
control in an unsafe manner.
I have uninstalled and reinstalled the player from the
browser, about 5 times now and it continues to be a problem for IE.
Works ok in Firefox if I manually download the FF installer. Is
there a standalone installer for Vista/IE7 or am I forced to use
the ActiveX installer which seems to have issues?

Fix: Removed both (!?more than one?!) versions of flash
player in my Programs and Features dialog, then ran
uninstall_flash_player.exe, reset IE7 to factory spec, then
reinstalled Flash from ActiveX. Seems to be working now.

TS1277 "iPhoto was unable to connect to Photo Stream" error after upgrading to mountain lion

Has anyone gotten this error after upgrading to mountain lion on a computer that already had a user setup on it?
My iphoto was working with photostream and now it will not connect at all.
I ran fix disk permissions and once it showed up in iphoto, photostream was loading and then it disappeared again.
help!

FWIW I fixed mine when I realised I'd probably downloaded iPhoto using an AppleID from the App Store but logged into iCloud with a different AppleID. I deleted iPhoto and it's related files (but not the iPhoto Library) using CleanApp, entered the App Store with my usual AppleID and downloaded iPhoto again. Once the App Store, the downloaded iPhoto and iCloud logins were the same iPhoto Stream worked again.

Error after upgrade CRS 4.0.4SR1 to 4.0.5SR2

Hi,
I've got some errors after upgrading my CRS 4.0.4SR1 cluster to 4.0.5SR2.
First my publisher's status stay in "patch" status for near 2 days now. I'm not able to change anything in the configuration, i've got this message "Config Changes are not allowed during 'Patch' operation, which was started by '_ccbu_build' at 'Thu Apr 08 04:31:04 CEST 2010 '. Please try again after 'Patch' is complete."(ERREUR02.jpg). How can I change this status?
Then I've got errors in historical DB which is working but not on the publisher only on subscriber. How can I resynchronize this DB?
Thanks for your help.

Thanks Tammy for the reply
We already tried the suggested SAP Note couple of time without any luck.
Regards,
SJ

Error after upgrading from sap b1 pl 35 to pl 49

hello sap experts
iam getting the following error after upgrading from sap b1 pl 35 to pl 49 this error is coming if we have given round off or discount in the below cell
"Discount deviates from authorised ranges (sales oreder-discount%for document) [message 439-15] pls make it as soon as possible an i will be thankful to those guys .
regards
Jenny

Hello Jenny,
You may check by supreuser account first to see if you got the same error. If not, it probably just related to user authorization. If yes, it must be a bug.
Thanks,
Gordon

What can I do if I get an internal power error after upgrading to Windows 10?

QuestionWhat can I do if I get an internal power error after upgrading to Windows 10?
AnswerSome laptops with AMD graphics that upgraded to Windows 10 are showing blue screens with error messages regarding Internal_Power_Error. If you receive this error, try the procedure in this article.
First, you'll need to quickly set the boot options to Safe Mode:
1. Hold the Windows key and press 'R' to open the run box.
2. Type MSCONFIG, then press ENTER.
3. Select the BOOT tab.
4. Under BOOT OPTIONS, check Safe boot, then select Minimal.
5. Click Apply, then OK.
6. Click Restart. (If prompted, click Restart anyway.)
From Safe Mode disable the AMD Display Driver:
1. Hold the Windows key and press the 'X' key to open a menu in the lower-left.
2. Click Device Manager.
3. Expand Display adapters to show the two display adapters.
4. Double click AMD Radeon R9 M200X Series.
5. Select the Driver tab.
6. Click Disable, then click Yes to confirm.
7. Click Close.
8. Hold the Windows key and press the 'R' key to open the run box.
9. Type MSCONFIG, then press ENTER.
10. Select the BOOT tab.
11. Uncheck Safe boot.
12. Click Apply, then OK.
13. Click Restart. (If prompted, click Restart anyway.)
From Windows 10 started with the AMD Display Driver disabled:
1. Hold the Windows key and press the 'X' key to open a menu in the lower-left.
2. Click Device Manager.
3. Expand Display adapters to show the two display adapters.
4. Double click AMD Radeon R9 M200X Series.
5. Select the Driver tab.
6. Click Update Driver.
7. Click Search automatically for updated driver software.
8. An AMD driver should be found and installed.
The driver that originally caused this problem is AMD display driver version 15.200.1046.2 dated 7/15/2015.
The driver installed through this process might have an older date, such as 15.200.1055.0 dated 7/6/2015. That's okay.

I'm having the same problem. I got error message 21. I went to apple store. they are saying i have a hardware error. Really, my phone was working before the update. Asked me for $150 to get another one when I am due to get a new one and wanted to pass this one on to my child.
Help please,
I will be glad to go back to the older software update

Imac error after upgrade to 10.8.4

I received an error after upgrade tp brand new imac. Error was upgrade was not installed. Upon reboot the version of SW in About thi Mac is 10.8.4. Bug?
iMac i7, 21.5" 16GB memory, fusion drive.
Thanks for input. I assume the upgrade took.

Verify Permissions gave me some errors, I deleted the repeats and the permissions fixed lines:
Repairing permissions for “Macintosh HD”
Warning: SUID file “System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/readconf ig” has been modified and will not be repaired.
Warning: SUID file “usr/lib/sa/sadc” has been modified and will not be repaired.
Warning: SUID file “usr/bin/quota” has been modified and will not be repaired.
+++ (multiple repairs)
Permissions repair complete
I verfied the HD
Much text (removed)...
The volume Macintosh HD appears to be OK.
I also loaded the Apple downloads version of the upgarde and received the following (again):
The Installation failed
The insatllation encountered an error that caused the installation to fail. Contact the software manufacturer for assistance.
Message was edited by: Steve51K

Error after upgrade 3.2.2 to 3.3.1 oracle vm manager

Hi i have a problem after upgrade to 3.3.1 oracle vm manager, when access admin user or console have this error
Unexpected error during login (java.lang.Exception: The Oracle VM Manager is still starting up, please try logging in again in a moment.), please consult logs for details.
have idea?

but the server and 'switched on for a long time if it' s why hon done as well several reboots but not 'solve the problem, if someone can' help me solve the problem 'cause when virtual machines are working, but what I can not and do not in any way 'access to the console.

Authentication error after upgrade to APEX 4.2

Hi,
After the upgrade to Apex 4.2, I started to receive an error when trying to run the application.
ERROR: "There is no authentication configured for this application. ORA-01403: no data found".
I checked and double checked the authentication options. Everything seemed fine. Tried several tricks. No success.
Then I didn't bother much. I just recreated the application (that is - created a copy of the application) and got rid of this error. Then deleted the application that wouldn't run and kept the new one. Everything works fine now.
Was there an option that I had missed? What would have been a "polite" way to get rid of this error?
M
Edited by: user1671420 on 2.09.2012 13:11
Edited by: user1671420 on 2.09.2012 22:55

Hi,
I had the same issue after upgrade, using a Custom Authentication Scheme (LDAP).
Debugging and adding logs indicated that the session was being processed correctly, but to "nobody", therefore raising the "Invalid Login Crednetials" message.
At a total loss for ideas, I started changing URL parameters on this authentication scheme (after having deleted the login page, recreating and even re-importing, changing processes etc etc), applied the changes and it worked.
Not fully understanding why slight changes worked, I reverted the changes, clicked on "Apply Changes" and it worked as well.
This led me to believe that the actual Authentication Scheme was decompiled, or needed to be re-validated somehow. I tested this on other applications that use the same scheme (but were also inaccessible), and it worked.
Edit Application --> Edit Application Properties --> Security Tab --> Define Authentication Schemes --> "Edit Current Scheme" --> Don't make any changes, Simply click on "Apply Changes"
I hope this helps anyone who might be having the same issue.
Kindly,
James

Out of Memory error after upgrading to Reader X

We have several PDF documents that work fine on Reader 9. But after upgrading to Reader X, the files will not open. Instead, they report an Out Of Memory error and a blank document opens instead. Removing Reader X and re-installing Reader 9 corrects the issue. This has been reproduced on 3 different PCs running both Windows XP and Windows 7.
Any suggestions?

Just to throw in my 2 cents... Adobe has known about the out of memory bug at least since 01/12/2011 because that is when I reported the problem to them. I even had an escalated support case #181995624 and bug#2800823. Our problem comes from a EFI Fiery E7000 attached to our Lanier LD460c Copier. Any pdf's made from that copier will not open in Acrobat X, although they will open in lower versions of Acrobat just fine. Our only workaround is to keep Acrrobat 9 on office computers, or you can open the offending pdf in Acrobat 9 or earlier and print it to pdf, and then it will open in Acrobat X!!! They acknowledged that this was a bug, see my email chain below. This was the last update I received from Adobe, very frustrating...
From:
Sent: Wednesday, February 09, 2011 9:12 AM
To:
Cc:
Subject: RE: Case 181995624; Unable to open PDF
Hi Phil,
We do not have this information or estimate time by our Engineering team yet.
Regards,
Neeraj
From:
Sent: Monday, February 07, 2011 8:19 PM
To:
Cc:
Subject: RE: Case 181995624; Unable to open PDF
Next major release as in the next patch for Acrobat X, or as in Acrobat 11?
From:
Sent: Saturday, February 05, 2011 4:31 AM
To:
Cc:
Subject: Case 181995624; Unable to open PDF
Hi Phil,
You can get back to us with the Bug Number provided you earlier based on which we will give you the update by our Engineering team. However, the update for now is that it is decided to fix in our next major release.
Regards,
Neeraj
From:
Sent: Thursday, February 03, 2011 1:33 AM
To:
Subject: RE: Case 181995624; Unable to open PDF
Can you send me a link to where I can find information on the bug?
From:
Sent: Tuesday, February 01, 2011 10:14 AM
To:
Cc:
Subject: Case 181995624; Unable to open PDF
Hi Phil,
Hope you are doing well.
I have researched on your issue and found that it is a BUG with Acrobat X. I have logged it on your behalf so that our Engineering team can have a look on that. Please find the Bug Number #2800823 for any update on this in future. I am closing this case on your behalf.
Have a nice day.
Regards,
Neeraj
From:
Sent: Tuesday, February 01, 2011 12:22 AM
To:
Cc:
Subject: RE: Case 181995624; Unable to open PDF
Any updates on this case?
From:
Sent: Friday, January 14, 2011 2:03 PM
To:
Cc:
Subject: RE: Case 181995624; Unable to open PDF
The EFI Fiery E-7000 Controller version is 1.2.0 and it handles the scanning and printing functionality of our Lanier LD160c copier. I have attached two sample files. One is a 1 page scan from our copier. The other is a combined pdf that I just created in Acrobat 9. The first two pages of the combined pdf consists of a webpage that I printed using Acrobat 9 and then the scan from the copier is on the 3rd page. In Acrobat X, once you get to the 3rd page you will receive the Out of Memory error. It will open in previous versions of Acrobat just fine though.
From:
Sent: Friday, January 14, 2011 11:52 AM
To:
Cc:
Subject: Case 181995624; Unable to open PDF
Hi Phil,
Thanks for the information.
I have the PDF file provided by you and able to reproduce the behavior. I tried to call you at 214-303-1500 but got voice mail.
Please let me know when you will be available so that I could call you and continue further with this issue.
Regards,
Neeraj
From:
Sent: Thursday, January 13, 2011 6:57 AM
To:
Cc:
Subject: Re: Case 181995624; Unable to open PDF
It is a walk up copier and we scan to email. The EFI Fiery controller E7000 handles pdf conversion for the copier, but yes it has the latest firmware. The bottom line is that we have 3 or 4 years worth of pdfs created from that copier rendered useless by Acrobat X. They open fine in previous versions of Acrobat. Did you get the test pdf file when this case was created?
-- Sent from my Palm Pre
On Jan 12, 2011 6:12 PM, Acrobat Support <[email protected]> wrote:
Hi Philip,
Thank you for choosing Adobe Support we have got your concern, we see that you are facing an issue with opening PDF files in Acrobat X, created from Lanier (Ricoh) LD160c copier. A technical support case 181995624 has been created for your reference. In order to assist you further. We would like to have the following information.
· Are you using the latest scanner driver ?
· What is the exact scanning workflow ?
Regards
Acrobat Support

Rt max -88716 error after upgrading to 8.5.1

I've got a strange behaviour just after upgrading to labview/rt 8.5.1, max 4.4.1, daqmx 8.7.1 my developpement computer and my pxi rt controller :
In MAX, when i try to open a test panel on a 6229 M series located on the pxi-rt, i receive a message saying that self test failed. If i choose to continue, the test panel appear, but all possible actions raise error -88716 : operation failed due to driver version mismatch between local and remote system (my labview is in french, so this is an approximative translation).
I tried several things, including install repair of daqmx, reinstall of all drivers on rt target, rebuilding max database on rt-remote and local system without any change.
The strange thing is that the 6229 card woks fine with Labview in the app i'm developing.
I didn't find anything related to -88716 error code, so any help would be appreciated.
Ludos

see...
http://forums.ni.com/ni/board/message?board.id=170&message.id=316888#M316888
Richard

Login Error after Upgrading from BW 3.5 to BI 7.0

Hi Experts,
We have carried out an upgrade from BW 3.5 to BI 7.0.
After Upgrade we are not able to login using SAP GUI. we are getting an error saying..
Username or Password not Valid..
During the upgrade (in Netweaver 2004s ) is there procedure necessary to be followed, which we could have missed..
Your response will be greatly appreciated.
Regards
LRaghunahth

Hi
Thanks a lot for your reponse.
Basically I am able to login thru sap* / ddic and can unlock the users / reset the password.
But the customer wants to know why the user is getting locked and it happened because of any procedure miss whil performing the upgrade..
if it is usual that users get locked during upgrade, any SAP Notes to refer..
Thanks a lot for helping in this community.
Best Regards
L Raghunahth

Facing Parse Errors after upgrading database from 10g to 11g

Hi,
We are facing parse errors in the SQL's after upgrading database from 10g to 11g.
Kindly look into below parse errors.
********************************** Parse Error *****************************************************
Tue Aug 13 14:13:08 2013
kksSetBindType 16173533-2: parse err=1446 hd=3c73061fb8 flg=100476 cisid=173 sid=173 ciuid=173 uid=173
PARSE ERROR: ospid=15598, error=1446 for statement:
SELECT ROWID,ORGANIZATION_CODE,PADDED_CONCATENATED_SEGMENTS,PRIMARY_UOM_CODE,REVISION,SUBINVENTORY_CODE,TOTAL_QOH,NET,RSV,ATP,ORGANIZATION_NAME,ITEM_DESCRIPTION,INVENTORY_ITEM_ID,ORGANIZATION_ID,LOCATOR_ID,LOCATOR_TYPE,ITEM_LOCATOR_CONTROL,ITEM_LOT_CONTROL,ITEM_SERIAL_CONTROL FROM MTL_ONHAND_LOCATOR_V WHERE (INVENTORY_ITEM_ID=:1) and (ORGANIZATION_ID=:2) order by ORGANIZATION_CODE,SUBINVENTORY_CODE,REVISION, organization_code, padded_concatenated_segments
Tue Aug 13 14:13:10 2013
kksfbc 16173533: parse err=942 hd=3c387c4028 flg=20 cisid=3266 sid=3266 ciuid=3266 uid=3266
PARSE ERROR: ospid=29813, error=942 for statement:
Select feature from toad.toad_restrictions where user_name=USER or user_name in ( select ROLE from sys.session_roles)
kksfbc 16173533: parse err=942 hd=3c97d83648 flg=20 cisid=3266 sid=3266 ciuid=3266 uid=3266
PARSE ERROR: ospid=29813, error=942 for statement:
SELECT password
FROM SYS.USER$
WHERE 0=1
kksfbc 16173533: parse err=6550 hd=35185e4278 flg=20 cisid=3266 sid=3266 ciuid=3266 uid=3266
----- PL/SQL Stack -----
----- PL/SQL Call Stack -----
object      line object
handle    number name
319e277050        30 anonymous block
319e277050        57 anonymous block
PARSE ERROR: ospid=29813, error=6550 for statement:
BEGIN sys.dbms_profiler."146775420110782746251362632012"; END;
kksfbc 16173533: parse err=942 hd=3c142d8600 flg=20 cisid=3266 sid=3266 ciuid=3266 uid=3266
----- PL/SQL Stack -----
----- PL/SQL Call Stack -----
object      line object
handle    number name
319e277050        67 anonymous block
PARSE ERROR: ospid=29813, error=942 for statement:
SELECT 1 FROM plsql_profiler_data WHERE 0 = 1
Please help.
Regards
Suresh

Hi Suresh,
Apologies for misunderstanding..
Tue Aug 13 14:13:08 2013
kksSetBindType 16173533-2: parse err=1446 hd=3c73061fb8 flg=100476 cisid=173 sid=173 ciuid=173 uid=173
PARSE ERROR: ospid=15598, error=1446 for statement:
SELECT ROWID,ORGANIZATION_CODE,PADDED_CONCATENATED_SEGMENTS,PRIMARY_UOM_CODE,REVISION,SUBINVENTORY_CODE,TOTAL_QOH,NET,RSV,ATP,ORGANIZATION_NAME,ITEM_DESCRIPTION,INVENTORY_ITEM_ID,ORGANIZATION_ID,LOCATOR_ID,LOCATOR_TYPE,ITEM_LOCATOR_CONTROL,ITEM_LOT_CONTROL,ITEM_SERIAL_CONTROL FROM MTL_ONHAND_LOCATOR_V WHERE (INVENTORY_ITEM_ID=:1) and (ORGANIZATION_ID=:2) order by ORGANIZATION_CODE,SUBINVENTORY_CODE,REVISION, organization_code, padded_concatenated_segments
Assuming you see the above error message in the alert log file, which was your original post, follow the below steps:
1 Get the 'ospid' value from the error
2. Issue the below command:
SQL> select request_id,ORACLE_PROCESS_ID
2 from fnd_concurrent_requests
3 where request_id = 15598;
3. After obtaining the request_id
4, Query it from the front-end using SYSADMIN responsibility
Hopefully this should get you the respective concurrent report/program.
Thanks &
Best Regards,

"The query was cancelled" error after upgrade from 10.1.3.3.3 to 10.1.3.4.2

Hi,
I was using OBIEE 10.1.3.3.3 /. After upgrading to 10.1.3.4.2 , the queries are not running ( long running queries alone) as expected. and so all the campaigns iwh tlong running queries are cancelled and the error message is seen in the xml log in Marketing jobs management.
We have upgraded the OBIEE version from 10.1.3.3.3 to 10.1.3.4.2 yesterday after which the connectivites have been checked with SQLPLUS and they are working fine. But when the campaign has been loaded, the Analytics have received the request for the segment query and after longer run, the task has been cancelled with the error message "The Query was cancelled as mentioned below in the Job Stats
<jobStats>
<jobID>2</jobID>
<jobType>WriteListFiles</jobType>
<jobUser>userid</jobUser>
<jobState>Error</jobState>
<jobTotalMilliSec>1h 41m 21s 160ms</jobTotalMilliSec>
<jobStartedTime>2012-03-22T08:06:13Z</jobStartedTime>
<jobFinishedTime>2012-03-22T09:47:34Z</jobFinishedTime>
<jobIsCancelling>N</jobIsCancelling>
- <exception>
<message>Job request of type "WriteListFiles" failed.</message>
- <exception>
<message>Error executing the list generation SQL.</message>
- <exception>
<message>Error in executing cursor for WorkNode (Id:0)</message>
- <exception>
<message>The query was cancelled.</message>
</exception>
</exception>
</exception>
</exception>
</jobStats>
Please let us know the suggestions
So far, the unaccessedtimingrunoutminutes tag has been tried to set 50 under ODBC tag in instanceconfig.xml. and the defaulttimeoutminutes has been tried to set to 150 in the same instanceconfig.xml.
along with that the rpd changes are done. For all the users apart from the Administrator, the timeout has been changedfrom 10 minutes to 150 minutes. But still that way is not working.
The segments was fired with the Administrator login. So , if the timeout for admin login can be set, i assume that the problem might be solved. Please let us know ur suggestions here too.
If that is the case, when we open rpd , only for Administrator user and group, the Permissions button is disabled. So i want to know how to change for Admin user settings in rpd..
Please advice us on the same.
Regards,
Madasamy M.
Edited by: Madasamy Murugaboobathi on Mar 26, 2012 1:40 PM

The issue has been resolved by setting the following parameters
<UnaccessedRunningTimeoutMinutes>120</UnaccessedRunningTimeoutMinutes>
<DefaultTimeoutMinutes>120</DefaultTimeoutMinutes>
<ClientSessionExpireMinutes>120</ClientSessionExpireMinutes>
<ConnectionExpireMinutes>120</ConnectionExpireMinutes>
<UIDefaultTimeoutMinutes>1440</UIDefaultTimeoutMinutes>

Several errors after upgrade

Similar Messages

Maybe you are looking for