Several errors while syncing, can't sync ipod anymore
Hello,
I just hooked up my ipod touch to my pc (windows 7) and hit the sync button, when itunes started throwing error messages at me. a few of them: unknown (0xE8004006), file specified cannot be found, folder specified instead of file, internal device error occured, etc etc.
then suddenly the bar at the info screen (the one that tells you how much space your music, videos etc is using) told me i only had 11Gb of music left (used to be 22) and Other had gone from a few hundred Mb to 12Gb.
I thought it might be solved by reconnecting my ipod to my pc, so I did. Now my iTunes is asking me to either restore my ipod from backup or set it up as a new ipod, the same window you get when your ipod is in recovery mode. However, my ipod is still fully functional, so i don't see any reason at all that would explain why i need to restore my backup...
So right now i'm unable to sync my ipod in any way, is there anyone who knows what to do?
Thanks,
Sander
Welcome to the discussions,
There is no other way than to restore your ipod to get rid of that big "other" section. If something goes wrong during a sync, the result is that additional part to the "other" section.
You can try to use your last backup first, but if this does not solve your problem, restore "as new ipod" to make sure your not using corrupt files from your backup.
Restoring: http://support.apple.com/kb/HT1414
If your ipod is not recognized in iTunes anymore, connect in recovery mode to restore: http://support.apple.com/kb/HT1808
Similar Messages
-
how to fix the error message itunes can't sync apps because it can't determine what apps are installed
Hi,
This may be Helpful
AMDS for Windows
http://support.apple.com/kb/TS1567 -
Error while relocating (Can't write file (no space)) - Help please
I have been having trouble relocating master files since upgrading to Leopard. The problem doesn't seem to affect only Aperture. I can happen when using Finder or another application to move files from one drive to another. Other types of files don't seem to be affected, just my library of image files.
The copy operation runs for a while then hangs up. The application doing the copy reports an error that that's the end. Aperture gives this error message: Error while relocating (Can’t write file (no space)). The Finder reports plenty of available space on the destination drive!
I remember seeing a thread--but can't find it now--about a problem with certain xmp metatdata embedded into files causing problems with file operations.
Hoping for a solution!
Message was edited by: thomas80205It's possible that you might have a corrupt file. Have you tried to copy different files on to the destination drive? If those files copy fine, then narrow down the offending file by copying less images at a time.
-
I have determined that I need to restore my iPod based on my problem (I manually update playlists and cannot add a playlist because I get an error message saying "The disk cannot be read from or written to.") So I open iPod updater 11-17-2005 to try to restore my iPod and I get an error message saying "Can't mount iPod". I can't restore or update my iPod because of this error message. Can anyone help me? I've been all through the discussions, online help, etc., and can't find this particular error message. Thanks!!
I came to charge my iPod because the battery went low, after few minutes it came on with this do not disconnect, i tried to restore it also says can't mount, it has been exactly two days. I disconnected the iPod and the backlight and the message did not go off until the battery ran out. I also need some help my address is [email protected] Seriously I just got my iPod click wheel 30Gb color display, video, photo.
-
Error while relocating (Can't create folder)
I have been running a referenced library for some time now. I seem to have run into a problem where I can no longer move originals from my hard drive to the referenced external drive.
When trying to do so, I get the following message:
Error while relocating (Can’t create folder)
Any ideas what has changed and how to fix this error?
Thanks
RobertI did the verify disk from drive utility, checked out as ok. I decided to run the repair disk anyways. I first chose the name of the drive "1 TB Seagate" and all was well with both verify and repair.
I then chose "GoFlex Aperture" and did the same. Verify was fine, but as you can see, something is amiss with trying to repair it.
Here's the get info grab.
Here's the console shot, did find something about the goflex aperture database drive, although that is far beyond my ability to comprehend.
I appreciate your help. I'm running to the post office, be back in a bit.
Thanks,
Robert -
I get an error message saying I can't sync my iPod touch 4th generation, but when I do the diagnostic test, it says it passes and is working properly? The place I see it is in the playlists...like they won't transfer from my computer to the iPod...Recently Added, Recently Played...
I tried everything suggested by the link you provided and it did not work. I had been purchasing music directly from my iPOD for over a year. I decided to start using my iTunes account and the first time I tried to sync I was prompted to "erase content and sync". What happened was that the music was deleted from my iPOD and then it has never successfully sync'ed with iTunes.
-
Error while Running sample Smart Sync Application
Hi all,
I followed step that has been given on mdk 2.5 tool kit <b>to create a Sample Smart Sync application which donwloads the short text and country code</b> with SyncBo,metadata xml and MCD,
while running a smart sync on mi client i am getting an error..................
<b>Error: 500
Location: /me/jsp/home/home.jsp
Internal Servlet Error:
javax.servlet.ServletException
at org.apache.jasper.runtime.PageContextImpl.handlePageException(PageContextImpl.java:461)
at jsp.home.home._jspService(Unknown Source)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:119)
at javax.servlet.http.HttpServlet.service(HttpServlet.java)
at org.apache.tomcat.core.ServletWrapper.doService(ServletWrapper.java:405)
at org.apache.tomcat.core.Handler.service(Handler.java:287)
at org.apache.tomcat.core.ServletWrapper.service(ServletWrapper.java:372)
at org.apache.tomcat.facade.RequestDispatcherImpl.doForward(RequestDispatcherImpl.java:222)
at org.apache.tomcat.facade.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:162)
at com.sap.ip.me.api.runtime.jsp.AbstractMEHttpServlet.dispatchRequest(AbstractMEHttpServlet.java:573)
at com.sap.ip.me.api.runtime.jsp.AbstractMEHttpServlet.doGet(AbstractMEHttpServlet.java:343)
at javax.servlet.http.HttpServlet.service(HttpServlet.java)
at com.sap.ip.me.api.runtime.jsp.AbstractMEHttpServlet.service(AbstractMEHttpServlet.java:164)
at javax.servlet.http.HttpServlet.service(HttpServlet.java)
at org.apache.tomcat.core.ServletWrapper.doService(ServletWrapper.java:405)
at org.apache.tomcat.core.Handler.service(Handler.java:287)
at org.apache.tomcat.core.ServletWrapper.service(ServletWrapper.java:372)
at org.apache.tomcat.core.ContextManager.internalService(ContextManager.java:806)
at org.apache.tomcat.core.ContextManager.service(ContextManager.java:752)
at org.apache.tomcat.service.http.HttpConnectionHandler.processConnection(HttpConnectionHandler.java:213)
at org.apache.tomcat.service.TcpWorkerThread.runIt(PoolTcpEndpoint.java:416)
at org.apache.tomcat.util.ThreadPool$ControlRunnable.run(ThreadPool.java:501)
at java.lang.Thread.run(Unknown Source)
Root cause:
java.lang.NullPointerException
at jsp.home.home._jspService(Unknown Source)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:119)
at javax.servlet.http.HttpServlet.service(HttpServlet.java)
at org.apache.tomcat.core.ServletWrapper.doService(ServletWrapper.java:405)
at org.apache.tomcat.core.Handler.service(Handler.java:287)
at org.apache.tomcat.core.ServletWrapper.service(ServletWrapper.java:372)
at org.apache.tomcat.facade.RequestDispatcherImpl.doForward(RequestDispatcherImpl.java:222)
at org.apache.tomcat.facade.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:162)
at com.sap.ip.me.api.runtime.jsp.AbstractMEHttpServlet.dispatchRequest(AbstractMEHttpServlet.java:573)
at com.sap.ip.me.api.runtime.jsp.AbstractMEHttpServlet.doGet(AbstractMEHttpServlet.java:343)
at javax.servlet.http.HttpServlet.service(HttpServlet.java)
at com.sap.ip.me.api.runtime.jsp.AbstractMEHttpServlet.service(AbstractMEHttpServlet.java:164)
at javax.servlet.http.HttpServlet.service(HttpServlet.java)
at org.apache.tomcat.core.ServletWrapper.doService(ServletWrapper.java:405)
at org.apache.tomcat.core.Handler.service(Handler.java:287)
at org.apache.tomcat.core.ServletWrapper.service(ServletWrapper.java:372)
at org.apache.tomcat.core.ContextManager.internalService(ContextManager.java:806)
at org.apache.tomcat.core.ContextManager.service(ContextManager.java:752)
at org.apache.tomcat.service.http.HttpConnectionHandler.processConnection(HttpConnectionHandler.java:213)
at org.apache.tomcat.service.TcpWorkerThread.runIt(PoolTcpEndpoint.java:416)
at org.apache.tomcat.util.ThreadPool$ControlRunnable.run(ThreadPool.java:501)
at java.lang.Thread.run(Unknown Source)</b>
please help me on this issue................
regards,
VenugopalHI Karthick,
Thanks for your reply.
while exporting the application it is running properly on NWDS platform as well in Eclipse platform but not in mi client.
i am sure that,
<b>MCD Name = Application Name = War file which is MDK_TUTORIAL_SYNC</b>
Below is my Meta XML file:
<b><?xml version="1.0" encoding="utf-8" ?>
- <MeRepApplication schemaVersion="1.1" id="MDK_TUTORIAL_SYNC" version="250901">
<Property name="CLIENT.BUILDNUMBER" />
<Property name="C_APPLRESOLVE" />
<Property name="DATA_VISIBLE_SHARED" />
<Property name="EN">LANGUAGE</Property>
<Property name="E_APPLRESOLVE" />
<Property name="FACADE_C_CLIENT">X</Property>
<Property name="FACADE_E_CLIENT">X</Property>
<Property name="HOMEPAGE.INVISIBLE" />
<Property name="INITVALUE" />
<Property name="RUNTIME">JSP</Property>
<Property name="TYPE">APPLICATION</Property>
- <SyncBO id="ZNWW_EXM01" version="2" type="download" allowCreate="false" allowModify="false" allowDelete="false" reqDirectSync="false">
- <TopStructure name="TOP">
- <Field name="SYNC_KEY" type="N" length="10" decimalLength="0" signed="false" isKey="true" isIndex="true">
<Input type="create">false</Input>
<Input type="modify">false</Input>
</Field>
- <Field name="LAND_TEXT" type="C" length="50" decimalLength="0" signed="false" isKey="false" isIndex="false">
<Input type="create">false</Input>
<Input type="modify">false</Input>
</Field>
</TopStructure>
</SyncBO>
</MeRepApplication></b>
reffer the above xml file and please find if i miss any fields.
regards,
Venugopal. -
Can't sync Outlook Calendar to iPod anymore
iTunes 10.1.2.17
iPod Touch 2G os 4.2.1
Windows XP sp3
Outlook 2003
All of a sudden when I try to sync Calendar to my iPod, it doesn't work.
The existing Calendar info on the iPod is not updated or changed at all.
I've tried everything - restarting Outlook, iTunes, the iPod.
I've tried removing all Calendar events from the iPod when syncing, then re-applying them. NOTHING CHANGES!
I'm getting really mad about this...the problems with syncing just keep piling up...
Has anyone had/fixed this Calendar problem?
Thanks......hi,
i have the same problem...
Problemereignisname: APPCRASH
Anwendungsname: com.apple.Outlook.client.exe
Anwendungsversion: 17.91.0.35
Anwendungszeitstempel: 4d4d9ef9
Fehlermodulname: ntdll.dll
Fehlermodulversion: 6.0.6002.18327
Fehlermodulzeitstempel: 4cb73436
Ausnahmecode: c0000005
Ausnahmeoffset: 0003de2d
Betriebsystemversion: 6.0.6002.2.2.0.256.6
Gebietsschema-ID: 2055
Zusatzinformation 1: 92bb
Zusatzinformation 2: 68693105be07fe9c534453c2763bfdf1
Zusatzinformation 3: 373d
Zusatzinformation 4: c658dd9bb257118bb018dd2bb5d257c3
Please fix this... -.- -
Unknown error -69. Can't sync or recover
After the latest iTunes update, each time I try to sync my iPod classic I get an "unknown error 69". I've tried restoring my iPod and still songs that have always synced before are causing the error. Help!
Hi Julie,
It sounds like you are having a frustrating issue when syncing your iPod classic. Let’s see if we can get you back up and running. I would suggest troubleshooting by using the steps in this article -
iTunes displays a -69 error when syncing iPod
http://support.apple.com/kb/HT1210
Thanks for using Apple Support Communities.
Best,
Brett L -
Error while doing the Ldap sync for UDFs
Hi All,
I am doing LDAP sync for UDFs,
Created users in OID.
assigned to orclIDXPerson object modified the ldapconfig.props and created the input file.
Now I am running the ldapsyncudf.sh then I getting the below error.
Exception in thread "main" java.lang.NullPointerException
at oracle.ods.virtualization.schema.AttributeTypeDefinition.getOID(AttributeTypeDefinition.java:117)
at oracle.ods.virtualization.jndi.OVDSchemaContext.convertAttrDefnToJNDIAttrs(OVDSchemaContext.java:655)
at oracle.ods.virtualization.jndi.OVDSchemaContext.getAttributes(OVDSchemaContext.java:137)
at oracle.ods.virtualization.jndi.OVDSchemaContext.getAttributes(OVDSchemaContext.java:109)
at oracle.iam.configservice.impl.LDAPUDFSyncImpl.isAttrExistsInLDAP(LDAPUDFSyncImpl.java:555)
at oracle.iam.configservice.impl.LDAPUDFSyncImpl.validateOVDSchema(LDAPUDFSyncImpl.java:519)
at oracle.iam.configservice.impl.LDAPUDFSyncImpl.addUDFwithLDAP(LDAPUDFSyncImpl.java:1082)
at oracle.iam.configservice.api.LDAPUDFSyncEJB.addUDFwithLDAPx(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.jee.spi.MethodInvocationVisitorImpl.visit(MethodInvocationVisitorImpl.java:37)
at weblogic.ejb.container.injection.EnvironmentInterceptorCallbackImpl.callback(EnvironmentInterceptorCallbackImpl.java:54)
at com.bea.core.repackaged.springframework.jee.spi.EnvironmentInterceptor.invoke(EnvironmentInterceptor.java:50)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
at $Proxy631.addUDFwithLDAPx(Unknown Source)
can anyone please unblock me.
Thanks,
ValliHi,
Please see if these help (for 11gR2)
Export the LDAPUser.xml file from MDS using weblogicExportMetatdata.bat. This xml contains the attributes mapping between OIM and OID for LDAP synchronization.
Include the entry for OIM attribute (if entry does not exist for the attribute in the XML) under entity-attributes node. For e.g. use the following xml snippet to add the entry for ISD Code for Phone attribute
<entity-attributes><attribute name=”ISD Code for Phone”> <type>string</type> <required>false</required> <attribute-group>Extended </attribute-group> <searchable>true</searchable> </attribute> </entity-attributes>
Include the entry for OID attribute under target-fields node. For e.g. use the following xml snippet to add the entry for CountryCode
<target-fields><field name=”CountryCode”><type>String</type> <required>false</required> </target-fields>
Now map the OIM attribute with the OID attribute using the following xml snippet under attribute-maps node
<attribute-maps><attribute-map> <entity-attribute> ISD Code for Phone </entity-attribute> <target-field>CountryCode</target-field> </attribute-map></attribute-maps>
Save the changes and import the file back into MDS using WebLogic import utilities. -
Itunes error 1156. Can't sync with iPhone 4
Hello,
I have upgraded my iPhone 4 to 5.0.1 version but now iTunes don't sync the pictures and don't sync the music too.
When I sync itunes says "the iphone 4 can not be syncroniced. Unknown error 1156".
My iTunes is up to date in the 10.5.2. (11) version.
Please, anybody can help me?
Regards.iTunes>Edit>Preferences>General
Once there, make sure Book's is checked. Then you should have it on your left side in iTunes and delete it there with a simple right click.
after u do this try sync your iPhone -
ITunes recognizes iPhone but gives me error message iTunes can't sync
I always sync iPhone and iTunes on the same Mac computer. This is the first time I received an error message on iPhone that says iTunes cannot sync. Check iTunes for reason why it won't sync. Except, I don't see anywhere in iTunes that it shows he error message or gives me a reason why it didn't sync?
Is there a specific place in iTunes that I would locate an error message?
I checked category iphone 4 GSM, but notice there is a category iPhone 4 CDMA. Don't know the difference, so I just checked one.No you cant. These are the requirements for Windows.
PC with USB 2.0 port
Windows 7; Windows Vista; or Windows XP Home or Professional with Service Pack 3 or later
iTunes 10.2 or later recommended
(free download from www.itunes.com/download)
iTunes Store account
Internet access -
Itunes won't sync video's to ipod anymore after changing pc's
I've recently bought a new pc, so I transferred all my ipod contents onto the new pc, however when I plug the ipod in it syncs all my music and photo's but for some reason doesn't appear to sync the video's! I don't get any error message and all the video's are in the correct format and play fine in itunes.
I just don't get it because they were all on my ipod before and now they won't go on.
Can anyone help me out please?I am having the same problem. I had Season 1, 2, and some of 3 of Desperates Housewives, and music videos, and games all purchased from Itunes, on my Ipod. One day I plugged my Ipod up to Sync my newly downloaded shows, and it erased ALL of my music videos and TV shows and games. I have checked the settings and they are all correct. Can someone please please help me?
(My Itunes didn't work for 3 weeks, I had to reinstall Itunes and Quicktime, maybe this is part of my problem now. All of my music transferred without any problem. -
Don't want to sync podcasts to my iPod anymore- now they won't transfer!
Hey folks,
I manually managed all my iTunes podcasts for the longest time without any problem, and last week, decided to try out auto-sync because I would routinely leave the house and forget to transfer the newest editions of my favorite podcasts to my iPod.
After realizing I liked the old way better, I decided to go under the "Podcast" tab of my iPod and uncheck "sync podcasts", assuming that this would let me go back to manually managing them. However, when I try to manually drag and drop my podcasts into my iPod, they don't show up.
All podcasts worked fine before and are all in the right format, being subscribed to in the official iTunes store.
Any suggestions? Thanks a bunch.
EDIT: Sorry everyone, just realized this is the iTunes for windows section. Didn't mean to post here. Ooops.
Message was edited by: Ashannon04
Message was edited by: Ashannon04You can choose to "automatically update selected playlists only" in which case you can create a playlist specifically for the Nano and drag the tracks you want into it. If you tire of the list and want to change it, you just add or remove the songs you don't want. The ones you take out out remain in the library to be used by the other iPod. Or you can choose to "manually manage songs and playlists"
For info:
The iPod offers three ways to transfer music from your computer. You can select one of the following update modes from the iPod Preferences menu in iTunes (Edit=>Preferences=>'iPod' tab):
1) Automatically update all songs and playlists. This is the default mode, in which your entire music library, including playlists, is automatically synced to your iPod. If the music library on your computer exceeds the iPod storage capacity, you are prompted to select a different update method.
2) Automatically update selected playlists only. With this option, iTunes automatically copies the playlists you have selected to the iPod when you connect it to the computer.
3) Manually manage songs and playlists. You can also choose to transfer music to the iPod manually. This allows you to drag and drop individual songs and playlists from iTunes to the iPod. -
Firefox sync can I sync my smart TV to my pc
I've got Windows 7 Home Premium and a all-in-one desktop pc (Inspiron one 2020, 4 GB RAM, 64-bit operating system and I'm wondering if I can sync my pc with my Samsung smart tv.
I'm guessing this is close to the model TV that you have. <br />
http://www.samsung.com/uk/consumer/tv-audio-video/television/led-tv/UE32ES5500KXXU-spec
Under '''Smart TV Functionality''' in the right column - '''Web Browser available''' and '''Samsung Apps available''' - can you access those Apps and see if Firefox is offered as an App that can be installed?
Maybe you are looking for
-
I have a Operating system Solaris 9 32 bits and i need to know if can install Oracle 9i or i must install Oracle 8i ????, Thanks Cristian
-
Set preset values that can be selected from a pull-down manu
I am writing a VI in LabView 7.1 to collect data. I have a set of variables that need to be set at the beginning. I used Basic Information subVI to input these variables to be saved in the data file header, but everytime I run the VI I have to type i
-
Computer change (how do i get all my songs onto my new computer)
hi there, i was wondering how i could transfer all the songs (and videos) from my old computer onto my new one? any help appreciated, thanks.
-
Error message: (translated from Dutch) "Cannot find corresponding style page for media query"(see image) I cannot find what is wrong with this page: steun sesem This message does not appear on the other pages of this site.. What do I wrong?? Thanks i
-
I am trying to download a music bookI purchaed on my ipad2 It won't complete the download A message saying cocoa 503 (might have wrong numbers) would appear.Only about 2/3 of downo=load would work However, the book has downloaded perfectly to my i