Several extractors for CO-PA at same time

Hello,
I would like to know if it's possible to have more than one extractor wokring for COPA operating concern.
I have one extractor already working and i need another one.
This is possible?
Thanks on advance,
Maria

Hi,
chech this links.......
http://help.sap.com/saphelp_nw04/helpdata/en/53/c1143c26b8bc00e10000000a114084/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/fb07ab90-0201-0010-c489-d527d39cc0c6
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1910ab90-0201-0010-eea3-c4ac84080806
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ff61152b-0301-0010-849f-839fec3771f3

Similar Messages

  • CUOM 2.3 sends multiple notifications for Event StoppedGSUPerformancePolling with same time stamps

    Hi Alll,
    I have a CUOM Version 2.3 which shows mutiple notifications per Device for Event StoppedGSUPerformancePolling with same time stamps. The message below is generated from the default All_Events for all devices.
    Does anyone have a solution for that.
    Regards Michael
    This message is generated 8 times with the same time stamp in all messages.
    ** This message is generated from Cisco Unified Operations Manager **
    ALERT ID                = 00012OW
    CREATION TIME           = Sat 30-Oct-2010 16:31:57 CEST
    MODIFIED TIME           = Sat 30-Oct-2010 17:00:58 CEST
    STATUS                  = Active
    SEVERITY                = Critical
    MANAGED OBJECT          = 183.201.141.193
    MANAGED OBJECT TYPE     = VoiceGateway
    ASSOCIATED EVENTS       =
        Cleared:183.201.141.193:Unresponsive
        Active:183.201.141.193:StoppedGsuPerformancePolling
    CUSTOMER IDENTIFICATION = Voice Port
    CUSTOMER REVISION       = Voice Port

    if you get SNMP timeout on multiple devices then the fault usually lies in the path that the polling follows to get to these devices and back to the server.
    The problem obviously lies in the part path they have in common.
    It is not unusual to see the highest backbone loads during the night, due to backups being taken.
    Make sure the most important inter-switch links have no errors.
    I would rather fix this then turn off alerting.
    Cheers,
    Michel

  • HT204053 Can I have 2 different countries billing address under one Apple ID? I mean 2 countries credit card for payments at the same time under unique Apple ID.

    Can I have 2 different countries billing address under one Apple ID? I mean 2 countries credit card info for payments at the same time under one Apple ID.
    I do travel very often to overseas. I'm having problem with few apps that can not be updated when I'm using another countries store. I do have 2 countries billing address. So when there is an update I need to switch my county & billing address for few selected apps. I was wondering if I have option to add both countries as my billing address that would be great under same Apple ID. Is this option available?

    You can only have one credit card and billing address on your account at any one time.

  • Dispatch center - Select multiple tasks for scheduling at the same time

    Hi!
    I need a consultation regarding Dispatch center. Is there a functionality to select multiple tasks for scheduling at the same time for one resource?
    Please, guys, this is urgent.
    Jan

    You can schedule a single task or multiple tasks automatically directly from the
    dispatch center. The scheduling criteria applied come from Advanced Scheduler.
    Make Sure, you have the advanced scheduler. With out Advanced Scheduler and by just using Advice, you can only assign one task at a time.
    HTH
    ps: for more information, refer Field Service User Guide, "Scheduling Tasks"

  • HT3743 I was trying to software update i phone 3g, when software downloaded an install, one unknown error has occurred, and asking for restore, at the same time i am trying to re-store again an error of 1015, happen, what i should do

    I was trying to software update i phone 3g, when software downloaded an install, one unknown error has occurred, and asking for restore, at the same time i am trying to re-store again an error of 1015, happen, what i should do, for solution,
    please advise me,
    best regards,
    Ahmed

    try to edit your host file ang delete any line that contain gs.apple.com

  • Will it be possible to run several jobs in background at the same time?

    Hi!
    The new release looks promising. Look forward to hear more in Birmingham.
    Just now we have a problem. It have to do with functionality In Toad compared to SQL Developer.
    Will it be possible to run several jobs in background at the same time. Toad allows that.
    If yes: How can we make that happen?

    "Jobs" are always background.
    But I take you mean queries. Yes, since v1.5.x you can open an Unshared SQL Worksheet (ctrl-shift-n or the toolbar button).
    Have fun,
    K.

  • HT5569 How do I print using a wireless printer when I'm using wifi for Internet at the same time

    I can't figure out how to print via wifi when I'm using wifi for Internet at the same time please help

    You need to have your printer & ipad connected to the same wifi router.  ( This would be my best guess. )
    Robert

  • HT5622 Good day!! I was having two Iphones with same icloud id, later i deleted 1 id from one device, and made 2nd id for this device but same time my old id is stored on other device and i can not change it with another id, can any1 guide me on this issu

    Good day!! I was having two Iphones with same icloud id, later i deleted 1 id from one device, and made 2nd id for this device but same time my old id is stored on other device and i can not change it with another id, can any1 guide me on this issue.

    Log in to icloud.com on a web browser and remove the device from "Find My iPhone"

  • How to make several threads do smth at the same time?

    Hello!
    Is there a way to make several threads guaranteedly do something at exactly the same time? The code below creates two identical Random objects with approximately 90% probability, in 10% cases Random's are different (Random constructor takes current system time as its argument). But how to ensure it 100%?
    import java.util.*;
    public class SyncThreads extends Thread {
         static Date DATE;
         static long CURRENT_TIME;
        public static void main(String args[]) {
              DATE = new Date();
              CURRENT_TIME = DATE.getTime();
                    new SyncThreads().start();
              new SyncThreads().start();
         public void run()
              try
                   Date thread_date = new Date();
                   long diff = thread_date.getTime() - CURRENT_TIME;
                            //sleeping untill it's 1 second since the 1st line of main() executed
                   sleep(1000 - diff);
                   int r_i = new Random().nextInt();
                   System.out.println(r_i);          }
              catch (InterruptedException e)
                   System.out.println("Find out what InterruptedException is!");
    }

    and even if the PC has multiple processors you are still not guaranteed that it will run the seperate threads at the same exact moment. The JVM for the platform would have to be optomized to make use of multiprocessors for starters, and even if it is it still doesn't guarantee it, the way the OS handles applications (i.e. the JVM) and the way the JVM handles multithreads all will have implications on whether or not two threads actually truly run simultaniously.

  • How many computers can we run our license for LabVIEW at the same time?

    We have LabVIEW 8.2 and we need it to operate on several machines at the same time. How can we do this? Can we check to see if our current license allow us to do this?

    Are you talking about developing code on multiple machines or just running programs? If you build your applications into an executable you can deploy those to any machine without buying anything else. If you need the full development environment on each machine but will not be doing development on them look for something called a Debug License.
    =====================
    LabVIEW 2012

  • Triggering a sub work flow for multiple users at same time.

    I have a scenario in which I have created sub workflow as an activity for approval process. This sub work flow should be triggered for multiple users at the same time and their decison is independent of each other.
    This is like creating multipe instance of the same sub work flow and then the sub work flow runs indepedently as a new work flow for each of the approver and the process is completeded for approver independently.
    How can this be achieved?

    Tyr to do like this,
    1. First include the subworkflow in the main workflow template.
    2. Now include standard Block Step in the main workflow template.
    3. In the block select the block type as ParForEach.
    4. Before doing the 3rd point make sure that all the agents for whom you want whom you want to initiate the workflow, populate them in a Multiline conatiner element.
    5. Once completing 3rd and 4th points open the block step under the tab ParallelProcessing  assign the multiline container element name in the   for e;g if the multi line container element name is COSTCENTER then do the binding like below. the conatiner element COSTCENTERLINE is created by default once you include the multi line conatiner element under parller processing tab.
    &COSTCENTER[&_WF_PARFOREACH_INDEX&]&   -------->     &_COSTCENTER_LINE&
    Now assign the agent of the subworkflow as COSTCENTERLINE , imean if suppose you have 3 entries in the internal table then three separate and for three different agents the workflow is instantiated.

  • Need help on making desktop application to web application having individual controls for users at the same time

    Hi,
    I have an desktop application and the following are the functionalities of the same.
    1. User inputs the data file with path (log file) to parse the required data.
    2. Once the user enters the path and starts the tool with start button, the tool parse the required data in terms of records and gives the records (creates output file containing all the useful records).
    3. Have popup window to display a group of data.
    4. Have popup to Plot graph. When a button is pressed in main GUI, the popup is opened giving scroll bar menus to choose the data for the graph. User after selecting the data (multiple Y axis) press another button to plot the graph. The input to this popup is the output file generated by this tool.
    5. The main GUI has buttons (play, step forward, step backward, reverse play, pause, stop, 1st record, last record - like tape recorder buttons) to play the records one by one.
    This application is used by many people and since its a desktop application (created in labview 2009), the user every time has to manually install the newer version.
    "So it is required to make the application into web based so that, the user can individually access the tool at the same time (different instances same as desktop app) and run their own data files from their system. The output files to be stored in the respective user's system."
    Can this be done using Web Publishing or Web Services present in LabView?
    I tried using Web Publishing but it gives control to only one user at a time and loading the files from the client path to run the tool is not possible.

    Simple. 
    If all you are worried about are updates, just put the EXE on a shared network drive and have your users launch it from there.

  • How to use 2 webcam for java at the same time?

    hi there,
    I have a question to ask regarding webcam and java. Basically i want to know whether is it possible to have 2 web cam running in java at the same time? I have no problem when running one usb webcam since i m using "
    ml = new MediaLocator("vfw://0") ;
    what parameter must i use to specify when using 2 web cam
    many thanks
    sun

    Hi
    I am making a project in which i have to capture a image through webcam. How can I do it will you please guide me or if can provide me code. Many thanks for your support. My email id is [email protected]

  • Using multi-threading: Setting a VI to be used for two sequences at same time

    I have two sequences running as two different threads. This is supposed to be in parallel but both sequences access the same VI, then they're not executing as parallel because one sequence use this VI then liberates it and the other sequence use it, and so on consecutively until both sequences finish. This is not what I want.
    How can I do to set this VI with any kind of property or something that can be accessed for both sequences at the same time?
    Thanks,

    Hi Margarita, you can set a VI to be reentrant (under VI Setup»Execution Options from TestStand, this function can also be used from LabVIEW) . Now depending on the king of VI you are using this can be something safe or can cause trouble. If the VI needs to keep information (for example a Functional Global Variable) or it is handling Hardware it can give you errors (for example trying to access the same DAQ at the same time from different task.
    If you need more information can you tell us what does this VI does?
    This Links might also be useful:
    When I Run Parallel TestStand Executions That Call the Same VI, Why Don't the VIs Run in Parallel?
    Differences Between Reentrant VIs (Preallocate), Reentrant VIs (Share Clones), VI Templates, and Dyn...
    Best Regards
    Benjamin C
    Senior Systems Engineer // CLA // CLED // CTD

  • Whether two session with for update at the same time will wait for another?

    Will this scenario happen?
    One session executes: select ... for update/select ... for update nowait
    The other session also executes: select ... for update/select ... for update nowait
    Two sessions happens at the same time unluckily. Whether they will all stand by because of "for update" or quit immediately because of "nowait"?
    Thx a lot.

    HiddenName wrote:
    This situation is called 'a deadlock'. Oracle will automaticaly detect a deadlock. One of the statements will fail with ORA-00060 deadlock detected;
    No, it's not.
    A deadlock is when sesson-A has a lock on something that session-B needs in order to continue, and at the same time, session-B has a lock on something that Session-A needs in order to continue. They BOTH have something the other needs.
    In the OP's case, at least as he described it, it is simple serialization. The one with the lower scn will go, then the next.
    PS.
    Why don't you try? You can setup a small table with some records, open 2 sessions to the same database and for example issue UPDATE statements:
    session 1: update where id=1
    session 2: update where id=2
    session 1: update where id=2 - this will hang waiting for session 2 to commit and free lock
    session 2: update where id=1 - ORA-00060
    You may also read about deadlocks in chapter on "Data Concurency and Consistency" of "Oracle Concepts'.

Maybe you are looking for

  • Change the schedule line committed qty in PO items using ME_PROCESS_PO_CUST

    Dear Experts, I want to make the PO item schedule line committed quantity MNG02 field to zero, for this purpose I wrote the logic as below. but its not changing the committed quantity to zero. Please advice me. method IF_EX_ME_PROCESS_PO_CUST~PROCESS

  • GoLive CS2 & Win7 - "Unknown Publisher"

    This may be more of a Windows 7 issue than an Adobe/GoLive one...but I thought someone here might be able to help! Whenever I open GoLive CS2 in Windows 7, I get the User Account Control pop up window, asking me if  I want to allow the program "from

  • Multiple grid in alv

    Hi Friends, Is it possible in call 2 alv grid in a same time by using simple alv function module??

  • What roles a user has used

    At our company, people move around a lot.  Typically they get given additional roles, but old roles don't get removed.  I have been tasked to trim our users roles.  So my question is, "Is there any way to determine what roles have been needed by the

  • Palm515

    I have a Palm 515 and link it with Microsoft 200XP.  I have developed a problem when I go to HotSync it and I get this error message that says "Unable to initiate HotSync operation because the port is in use by another operation" Can anyone tell me w