Several import issues
Win XP, LR3.2
I'm a experience user and usually work from my Desktop... and it's been one year but in the last few days have done 2 jobs on my laptop... and something is wrong when I import.
I hope someone can tell me what's going on. I've never had these kind of issues before.
Understand... my file structure is: C:/Files/Photos/(then name of job...i.e.)Altrusa/Raw (etc). I was working with multi sub folders in the Altrusa Folder.
Unfortunately... this is a 5 day shoot and I've been working as I go... and these issues came up.
It appears:
1. When I go to import... LR creates automaticly a folder by date with my files in "My Pictures" of the latest uploaded photos from what ever files I put where ever (I never use "My Pictures)... so Instead I click and drag the folder from the correct location. However... sometimes something goes wrong and it takes it from the so-called "My Picture" location which really does not exist until LR does it's thing and creates the folder there (appearently). I also thought I noticed that recently on my desktop workstation as well... but I always click and drag on that 2 screen power horse and never paid much attention to it.
2. When it does that... all I have is a LR Folder listed by date... appearently in "My Pictures". Or so it appears in Windows Exployer. This totally messes up how I work with file structures.
3. I can no longer move images in Exployer and reload (import) from a new location even if I tell LR to ignore duplicate images.
4. I could have sworn that LR was not showing me images that were in the folder that exployer said were. And when I right clicked to get their location... they really were not where LR said they were (accorrding to win exployer).
5. In one nightmare... I had 3 images. Import had them grayed out as being loaded. Win Exployer said they were in Folder 3... yet they would not show up in LR "folder 3". So I renamed them and re-imported them. Bingo... they not only showed up in the correct directory... but the origional 3 did as well (with a "?" of course). I then deleted the new renamed files... and renamed them back to the origional names. and... all six (3 orig and 3 renamed) vanashed from the LR folder. So I tried reimporting the orig again... they were grayed out... so I renamed and re-imported... and they took and I worked with them that way.
6. It could have been me getting rummey at 2am after blowing 4 hrs... but I could have sworn LR removed some images from LR all on it's own. However... that does not explain the other same above problems I had during normal working hrs the last 4 days.
A. What's going on?
B. Once LR import an image... is there a way to get LR to reload that image?
C. Clicking on "Show image in Exployer" did not seem to be working correctly. Why?
Thanks Marv.
Ok... thanks. I changed to "one Folder".
Any clue onthe file renaming thing?.. as to whay none showed up and then all 3 origional files and 3 renamed files showed up. That was weird.
In this case... relinking was not the problem... as they flat were not showing up period.
One thing I just discovered... If I rate the images... that rating DOES NOT transfer when I export the image and reopen them in LR. Bummer. (In this case I had 1 star for the Client CD and 2 Star for the CD and Slide show presentatation... and the images would get exported 4x a day into one "final" folder. This really messed me up as I usually had "rated" turned on in the library after importing the exported files to the "Final" Folder... they were there... but No stars showed so they never visually showed up. Guess I should have built 2 Quick Collections.
As soon as I get home I will be adding the Expression Media cataloging program to my inventory... would have already if I haden't been so slammed before I left for the field... which will be a big asset for these multi day shoot projects. That will help with file mgt too. (Media Pro appears to be very broken for PC's... so I was lucky to have downloaded the trial of EM before they pulled it from sales... also managed to get a licience as well).
Thanks Marv.
Similar Messages
-
HP PhotoSmart 7510 suddenly has severe connectivity issues
I have a HP PhotoSmart 7510 printer since about 2 months. Initial setup worked like a charm and the printer has been working pretty much perfectly for the last 2 months. Wireless printing, scanning and internet access on the printer (e.g. for Facebook photos) all worked. Just from time to time i would get the occasional (mildly annoying) message on my computer saying "scan to computer is currently unavailable" but it usually worked itself out and whenever I needed it to work, it did work.
But since a few days ago, it has some severe connectivity issues. I didn't change any settings on the printer, router or computer - the issues just started appearing by themselves. I startet getting much more frequent messages on my computer saying "scan to computer is currently unavailable". I noticed I couldn't print anymore, and restarting computer, printer and/or router didn't help at all. The only thing so far i managed to print wirelessly since the problems started were the first 5 pixel rows of an image I tried to print, the rest didn't transmit.
It seems the printer still connects to the WLAN but printing and scanning no longer work, and whenever I try to access a web service on the printer (like Facebook) it says it has no internet connection, even though the WLAN light is lit up (not blinking) and all the wireless status reports say "congratulations, no problems found" and display IPs etc. just like normal.
I looked at the threads "PhotoSmart 7510 connects to router, but not to the web.", "Wireless printer (HP Photosmart 7510) not connecting to network" and "Photosmart 7510 won't connect to Web Services" but they weren't a big help. Activating EWS didn't work because even though the printer showed its IP address to be 192.168.1.3, when I entered this in my web browser it didn't find the printers configuration page.
I tried the following steps from one of the threads:
1. Restore the Network defaults
2. Unplug the printers power cord while it is still on. Leave it unplugged and walk to the router.
3. While the router is still on, unplug the power cord from the router, leave it unplugged for 30 seconds, then reconnect the power cord to the router. Once plugged back in the router should power on automatically.
4. Plug the power cord back into the printer. Once plugged back in the printer should power on automatically.
5. Run the Wireless Setup Wizard to reconnect the printer to your wireless network.
6. Try enabling Web Services.
I followed these steps exactly. Interestingly, even though I had done step 1 and restored the network settings to factory defaults, after turning back on, the printer somehow still had its old settings saved and reconnected to the network.
It seemed to have fixed the problem, the printer finally had internet access again (Facebook app showed my photos) and scan to computer found my PC. But after just about 3 minutes, the printer had lost its internet connectivity again. When opening the Facebook app, it displayed the same error message it did before. And printing no longer worked as well.
So, what is wrong with this printer?! It has the newest software update by the way (I checked during the 3 minutes it had internet access.) My computer is a HP Windows 7 x64 machine (EliteBook 6930p) and the router I'm using is a Netgear WNDR3700.
I specifically bought this printer for my studies at university. In one week i have my exams and in order to study I REALLY need to be able to print some of my course materials! So any help as quickly as possible would be greatly appreciated. Or do you think this is a case for a warranty replacement, considering the printer's really strange and error-prone behavior?
Thanks a lot!I can assure you that it is not a router issue. It appears to me that it is a driver compatibility with Windows OS. After trying to get to the bottom of this since my Photosmart 7525 was new and reading just about every forum and blog, I have come to the conclusion that the issue must be related to the HP driver itself.
The issue does not seem to affect any Mac systems, and from one forum someone was able to fix it by downloading new drivers compatible with 64-bit systems (which seem to not be affected by the glitch). But that leaves us 32-bit people stuck with the current driver which does not work.
The printer is connected with good signal to the wireless router (no matter who's router it is and what configuration is made). The printer can be pinged from the router and any computer on the network which is not currently being affected by this issue. However, the affected computer fails pings by either request timed out, or destination host unreachable. Pings are successful from the affected computer to any other device on the network. The only way to recover (at least for a few days) is to reboot the affected computer.
Also, from the display on the 7525, the network tests pass without issue. I can also download and print content from the internet with no issues.
Please do a quick google search of this issue and you will see several THOUSAND entries of people with the same request. This is a serious issue that people are having and everything is pointing to an HP problem (not routers, improper installation of software or drivers, etc...). I agree with several other customers that HP should be on the hook for this fix. I will give it another couple weeks, then back to the store for a reliable unit from another competitor (Canon, Lexmark, etc..)
Thank you in advance for escalating this issue to product engineering,
S. Hunn
There are 10 kinds of people in this world... Those who understand binary and those who do not. -
Multi Select Choice on af:query has severe performance issue
Multi-select choice used with af:query through a view criteria is causing severe performance issue on deselection of "All" checkbox, if the data in the list is around 550 rows. The same component works absolutely fine when used in a form layout.
I can provide you a re-producible test case, if anyone needs it!
***: This is a customer environment issue, and customer is eager to have multi-select in this case. Appreciate any help!Glimpse of repetitive lines from console for the above scenario:
<DCUtil> <findSpelObject> [2208] DCUtil, returning:oracle.jbo.uicli.binding.JUApplication, for TestSelectChoiceDefaultAMDataControl
<ADFLogger> <begin> Attaching an iterator binding to a datasource
<DCIteratorBinding> <getViewObject> [2209] Resolving VO:TestSelectChoiceDefaultAM._SESSION_SHARED_APPMODULE_NAME_.SessionAM.DeptReadOnly1 for iterator binding:noCtrl_oracle_adfinternal_view_faces_model_binding_FacesCtrlListBinding_59List_60
<DCUtil> <findSpelObject> [2210] DCUtil, RETURNING: <null> for TestSelectChoiceDefaultAM._SESSION_SHARED_APPMODULE_NAME_.SessionAM.DeptReadOnly1
<ADFLogger> <addContextData> Attaching an iterator binding to a datasource
<ADFLogger> <addContextData> Get LOV list
<ADFLogger> <begin> Get LOV list
<DCUtil> <findSpelObject> [2211] DCUtil, returning:oracle.jbo.uicli.binding.JUApplication, for TestSelectChoiceDefaultAMDataControl
<ADFLogger> <begin> Attaching an iterator binding to a datasource
<DCIteratorBinding> <getViewObject> [2212] Resolving VO:TestSelectChoiceDefaultAM._SESSION_SHARED_APPMODULE_NAME_.SessionAM.DeptReadOnly1 for iterator binding:noCtrl_oracle_adfinternal_view_faces_model_binding_FacesCtrlListBinding_123List_124
<DCUtil> <findSpelObject> [2213] DCUtil, RETURNING: <null> for TestSelectChoiceDefaultAM._SESSION_SHARED_APPMODULE_NAME_.SessionAM.DeptReadOnly1
<ADFLogger> <addContextData> Attaching an iterator binding to a datasource
<ADFLogger> <addContextData> Get LOV list
.....many times followed by
<ADFLogger> <addContextData> Attaching an iterator binding to a datasource
<ADFLogger> <addContextData> Get LOV list
<ADFLogger> <begin> Get LOV list
<ADFLogger> <addContextData> Get LOV list
<ADFLogger> <begin> Get LOV list
<ADFLogger> <addContextData> Get LOV list
<ADFLogger> <begin> Get LOV list
<ADFLogger> <addContextData> Get LOV list
<ADFLogger> <begin> Get LOV list
...many times -
I am running on OSX 10.10.1 and have a 2009 imac intel and I am having severe latency issues. I am not familiar with macs as this is my home computer used by other family members. Any help on how to troubleshoot why such latency issues?
When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting. -
Strange import issue .. no longer works in 2.6 or Beta 3
Strange import issue.
I use LR-2.6 everyday but have only played around with the LR-3 for a limited amount of time so the other day I decided check it out and tried to import a handful of RAW(canon) files on a SDxc-8g card via a USB card reader. I set it up to copy and convert to DNG, apply a few keywords and Metadata but when I tried it acted like it imported the first image and then froze. Card reader lights stopped blinking and just stayed on, program task bar doesn’t show any progress, not even for the first image. I then went to the folder that I was going to have the images copies to and it contained a file of the first image, but there is no indication that LR-3 even created it and it doesn’t show up in the catalog. When I tried to close out LR-3 is popped up the “in the middle of a task warning” so I just closed the program and tried it a couple more times to no avail.
So I though o well I will just open up LR-2.6 and import them from there, guess what now LR-2.6 does the exact same thing!!
I thought maybe my card reader was a POS but I was able to drag all the files to a new folder on my desktop and import them from there, nope. Tried rebooting a couple times, even opened a new catalog to test with, in both LR-2.6 and LR-3 and neither will work..
I am stumped any ideas?Thank you for everyone's assistance
I actually figured out what the problem was, like most issues it comes back to operator error, it seem I had inadvertently chose a "rename file on import" template that I had set up to name the files based on a custom fill-in field in the Meta Data, I normally only used that template when I was exporting images that had been completely edited, so being these images were new imports that field was blank, hence it would import the first image and then do to " don't import subjected duplicates" being checked it would just stop the import process. -
IMPORT issues: Works with iMovie 3 but not iMovie 6 ???
Okay, still trying to get my import issue resolved.
I have a SONY HDR-HC3 DVmini.
No problems with iMovie 3 on my Powerbook.
iMovie 6 on my MDD will let me control the camera, but the screen stays BLUE with no IMPORT.
My buddy thinks it might be a Quicktime issue.
He said to download Quicktime Pro, that might resolve this issue.
I can copy the iMovie 3 file to my machine with iMovie 6 and do the editing, just not the importing...
THANXHi
Can be so much.
Often Camera has to be connected to Charger/mains during Capture.
An majority is a faulthy - badly connected FW-Cable (USB don't work at all)
My list on this
*NO CAMERA or A/D-box*
Cable
• Sure that You use the FireWire - USB will not work for miniDV tape Cameras
FireWire - Sure not using the accompany USB-Cable but bought a 4-pin to 6-pin FW one ?
• Test another FW-Cable very often the problem maker.
Camera
• Test Your Camera on another Mac so that DV-in still works OK
• Toogle in iMovie pref. Play-back via Camera (on<->off some times)
• Some Cameras has a Menu where You must select DV-out to get it to work
• Camera connected to "charger" (mains adaptor) - not just on battery
Does Your Camera work on another Mac ?
Sorry to say it is to easy to turn the 6-pin end of the FW-cable 180 deg wrong.
This is lethal to the A/D-chip in the Camera = needs an expensive repair.
(Hard to find out - else than import/export to another Mac ceased to work
everything else is OK eg recording and playback to TV)
Connections
• Daisy Chaining most often doesn’t work (some unique cases - it’s the only way that work (some Canon Cameras ?))
Try to avoid connecting Camera <--> external HD <--> Mac but import directly to the Mac then move
the Movie project to dedicated external hard disk.
Mac
• Free space on internal (start-up) hard disk ? Please specify the amount of free space.
(Other hard disks don't count)
I go for a minmum of 25Gb free space for 4x3 SD Video - and my guess is 5 times more for 16x9 HD ones
after material is imported and edited.
SoftWare
• Delete iMovie pref file may help sometimes. I rather start a new account, log into this and have a re-try.
• Any strange Plug-ins into QuickTime as Perian etc ? Remove and try again.
• FileVault is off ? (hopefully)
Using WHAT versions ? .
• Mac OS - X.5.4 ?
• QuickTime version ? (This is the heart in both iMovie and FinalCut)
• iMovie 8 (7.1.?) ?
• iMovie HD 6 (6.0.4/3) ?
*Other ways to import Your miniDV tape*
• Use another Camera. There where tape play-back stations from SONY
but they costed about 2-4 times a normal miniDV Camera.
• If Your Camera works on another Mac. Make an iMovie movie project here and move it
over to Your Mac via an external hard disk.
(HAS TO BE Mac OS Extended formatted - USB/DOS/FAT32/Mac OS Exchange WILL NOT DO)
(Should be a FireWire one - USB/USB2 performs badly)
from LKN 1935.
Hi Bengt W, I tried it all, but nothing worked. Your answer has been helpfull insofar as all the different trials led to the conclusion that there was something wrong with my iMovie software. I therefore threw everything away and reinstalled iMovie from the HD. After that the exportation of DV videos (there has not been any problem with HDV videos) to my Sony camcorders worked properly as it did before. Thank you. LKN 1935
from Karsten.
in addition to Bengt's excellent '9 yards of advice' ..
camera set to 'Play' , not rec/computer/etc.?
camera not on battery, but power-line?
did your Mac 'recognize' this camera before...?
a technical check.
connect camera, on, playback, fw-connected...
click on the Blue Apple, upper left of your screen ..
choose 'About../More..
under Firewire.. what do you read..?
More
• FileVault - Secure that it’s turned off
• Network storage - DOESN’T WORK
• Where did You store/capture/import Your project ?
External USB hard disk = Bad Choise / FireWire = Good
If so it has to be Mac OS Extended formatted
----> UNIX/DOS/FAT32/Mac OS Exchange is NOT Working for VIDEO !
mbolander
Thanks for all your suggestions. What I learned is that I had a software problem. I had something called "Nikon Transfer" on my Mac that was recognizing my Canon camcorder as a still camera and was preventing iMovie from working properly. After uninstalling Nikon Transfer and doing a reboot, everything worked great.
I never liked the Nikon Transfer software anyway--I guess I'll get a cheap card reader and use that to transfer photos in the future.
*No Camera or bad import*
• USB hard disk
• Network storage
• File Vault is on
jiggaman15dg wrote
if you have adobe cs3 or 4 and have the adobe bridge on close that
or no firewire will work
see if that halps
DJ1249 wrote
The problem was the external backup hard drive that is connected, you need to disconect the external drive before the mac can see the video camera.
Yours Bengt W -
Importing issues with Final Cut Pro X. Green flash and twitches while play back
Hello, I'm having some importing issues with Final Cut Pro X and I can't find any solution whatsoever. Perhaps my importing settings are wrong?
Anyways, I've done a lot of recordings on eye TV and HD PVR with some videos that are about 3 hours long. I exported them into H.264 files, which turns them into mpeg-4 files with AAC audio. Then I import them into final cut pro X and I notice it takes a long time for them to render the videos and I notice that there are some green screens and twitches while I play through the video.
Here is a screenshot of the green screen that I'm talking about:
[URL=http://imageshack.us/photo/my-images/688/screenshot20130409at338.png/][IMG]http://img688.imageshack.us/img688/4537/screenshot20130409at338.png[/IMG][/URL]
Could it be my 2 video graphics card that is causing this kind of issues? Or is there any solution to fix this?
In the past, I've used iMovie 09 and it worked out perfectly. However, the new iMovie 11 is terrible because it automatically optimzie my 3 hour long videos into making the importing process to (144 hours long to import). Is there any way to get iMovie 09 back or am I stuck on dealing with this Final Cut Pro X issues?
More information:
My Hauppauge HD PVR settings are set to custom. Video Constant Bit Rate, the average bit rate: 13.5 Mbps. The audio is AAC.
My project settings for video properties is set to custom, 720P HD Format, 1280 x 720 Resolution and 30P Rate. The audio and render properties is set to custom, audio channels is stereo, audio sample rate is 48kHz and the Render Format is Apple ProRes 422.
I export the video as a quicktime movie. The export setting is H.262.
The summary of the export is:
File type: Quicktime movie
Estimated size: 397GB
H.264, Width and height: 1280 x 720. Framte rate: 30 fpsMy Hauppauge HD PVR settings are set to custom. Video Constant Bit Rate, the average bit rate: 13.5 Mbps. The audio is AAC.
My project settings for video properties is set to custom, 720P HD Format, 1280 x 720 Resolution and 30P Rate. The audio and render properties is set to custom, audio channels is stereo, audio sample rate is 48kHz and the Render Format is Apple ProRes 422.
I export the video as a quicktime movie. The export setting is H.262.
The summary of the export is:
File type: Quicktime movie
Estimated size: 397GB
H.264, Width and height: 1280 x 720. Framte rate: 30 fps -
Severe banding issue in shadow areas
Short Version: Having severe banding issues in shadow areas in Lightroom. Need to know how/what to set my color profile to to fix this issue. Lengthier description and images below.
I have read several posts here in the Lightroom forums about others who are experiencing the same type of banding issues, but I haven't seen any definitive answers on how to solve the problem.
I was able to take a couple screenshots of the issue that I am seeing. The image looks very different in Photoshop, Lightroom, Windows Photo Gallery, and also rendered in IE7. Screenshots of the image in Lightroom and the image in Photoshop are posted below at a 100% crop of the affected area. The first image is how it appears in Lightroom and the second image is how it appears in Photoshop.
From what I have read elsewhere the problem has to do with how Lightroom uses color profiles. I do not have much experience with color profiles, so I'd like to get everyone's recommendation on what color profile I should be using, and maybe a link to some information on setting color profiles and how to fix this issue. The image looks so much different in Lightroom than it does elsewhere, that I can't see myself being able to trust Lightroom to process my images.
Some info on my setup. Shoot RAW with Canon Rebel XT. Use a Dell with Pentium D running Windows Vista. Monitor is a Dell 2007FP, and currently I am using the Dell 2007FP color profile as far as I can tell.
Screenshot of image with banding in Lightroom
Screenshot of image as displayed in PhotoshopDon, Bob!
I think it is quite obvious that the Eric's problem is not banding per se (and the related cure by fiddling with black setting), but rather about the mismatch between how the file looks in LR's Develop 100% view and how the same file (or an exported file) looks in Photoshop.
Eric!
I am afraid there is no definite answer to this problem. Indeed there are a number of Windows users that have reported this problem. A very exhaustive and inconclusive thread is this:
http://www.adobeforums.com/cgi-bin/webx?128@@.3bc3578d
The bottom line so far seems to be this:
LR on Windows uses Windows ICM to generate how the image looks on the screen, while PS uses Adobe own engine to generate this. Somehow this set-up appears not to work reliably with LR - the on-screen image in LR 100% develop differs from the same file's appearance in PS or other color managed applications. The mystery here is that other applications that seem to use Windows ICM still manage to show image correctly, but not LR. But anyway, the Windows ICM appears to be the culprit here.
The amount of difference people see depends on the complexity of the monitor profile used. LUT based Version 4.0 profiles will be affected worst - not only shadow detail, but the overall tonality and colors may be off. The best match is achieved with simple matrix based version 2.0 profiles - on my machine the mismatch occurs only in deep shadows were I see banding/splotchiness in LR and only under certain Develop settings.
(Incidentallly, on Windows XP (and older) machines one should ALWAYS use ver 2.0 profiles, as Windows ICM does not support ver 4.0 profiles. I also think that Windows ICM cannot handle LUT based profiles correctly. My own experiments showed that using LUT based monitor profile resulted in mismatch between PS CS2 and other applications (like Canon DPP), not only LR. BTW - as you are using generic monitor profile, I can almost bet that it is a matrix ver 2.0 profile (good thing).)
I am curious about the Vista thing though. I had certain hopes that this image appearance problem in LR would be eliminated on Vista, as it uses the Microsoft's new Windows Color System which incororates an updated ICM that now supports ver 4.0 profiles and reportedly has many bugs of the previous ICM fixed. However, if your report is true and the image mismatch is not due to some other factors, then it seems that Vista does not solve this. -
Is there an update to iOS 6? I've been having several technical issues since the upgrade. Uncontrolled zoom of the entire screen, Siri taking 25 seconds to respond and not recognizing names, locking up of the phone. All requiring a reset.
I would restore with backup and if that doesn't fix it try as new
http://support.apple.com/kb/HT4137 -
I upgraded to LR5.2 2 weeks ago from 4.3. Install went fine, but I'm now having issues when importing my photos, Lightroom hangs partially through the import. The only choice I have then is to force quit the program, which then freezes my computer. Getting to be an invredibly frustrating exercise.
I have an iMac with OSX10.8.5 (Mountain Lion)
Lightroom 5.2
Importing & converting CR2 files (5DMkIII) to DNG.
Images being imported to an external hard drive.
Nothing has changed in my workflow or software except for the installation of LR5. I did read in some of the forums that there was import issues that appear to have been fixed with the latest release, however, whilst I DEFINTIELY have the latest release of LR5, this is still occurring. Any ideas? Another bug?
Cheers
Sarahsure did. All permissions are admin & I'm it. I haven't tried DL via image capture - LR4 gets me to the same end goal, tis just rather onerous to have to muck around with this twice. Appreciate your taking the time on this
-
Over the last few wks, i have lost several important file. Even the support team has not been able to recover them. Pls offer advice. I use microsoft office on my macbook pro, which is less than a year old.
pklfromarlington wrote:
Bob, Hate to steal your thunder but am hooked to an external hard drive using Time Machine and er information is where it shoudl be. Yes, I have combed the files, used Finder and any other tools I know.
You did not steal my thunder. You asked for advice, I provided advice. I assumed that since you nor the "support team" could find your files that you did not have any backup. You should have told us you do regular backups. We have no way to know otherwise unless you tell us. -
Oracle Apps Database severe Performance Issue
Hi Gurus,
This is regarding a severe performance issue running in our Production E-Business Suite Instance.
its an R12.1.3 setup installed with 11.2.0.1 Database. All the servers are Solaris Sparc 64 (Solaris 10)
Let me brief you about the instance first:
2 Node Application
- Main Application Server hosting web/forms/concurrent/admin servers
- iSupplier server hosting web services (placed in DMZ, used by external suppliers via Internet)
1 Node Database Server
Database Server Specs
Memory: 144G phys mem 20G total swap
- CPUs (8Px4cores, 2Px2cores)
- I/O - fiber channel hard disk (hitachi SAN Storage) - 7 DATA_TOPs (7 drives with RAID 5) - current DB size 1.6 TB
- at peak load, around 1000 concurrent forms session and 2000 web sessions.
We have been facing some serious performance issues and we raised an SR with Oracle Support.
The Support analyzed a bunch of AWR Reports we provided them and they asked us to increase the DB_CACHE from its current usage of 27G to 40G
So, we changed SGA_TARGET from 35G to 50G and PGA was increased from 35G to 40G as v$pgastat was also suggesting some lack of memory.
We made these changes last night.
Today morning we observed the following:
1. after start of office hours, we checked in the home page of EM DB Console that ADDM was showing reduced impact due to lack of SGA memory which seemed to be a good sign. Earlier it was around 25% which was now at 12%.
However, negative aspects were:
1. lot of swapping was reported by the System Administrators on the DB Server
2. High CPU Usage
3. EM DB Console showed a lot of "Concurrency Wait Class" events ...throughout the day lot of blocking sessions were reported which were making other sessions to wait.
in the AWR Report, following foreground reports were listed:
Top 5 Timed Foreground Events
Event
Waits
Time(s)
Avg wait (ms)
% DB time
Wait Class
DB CPU
132,577
61.46
library cache lock
3,539
40,683
11496
18.86
Concurrency
library cache: mutex X
4,014,083
21,011
5
9.74
Concurrency
db file sequential read
4,138,014
20,767
5
9.63
User I/O
latch free
381,916
5,897
15
2.73
Other
This is showing "library cache lock" events as the main culprit apart from the usual suspect, the CPU.
I am attaching the AWR Report. Please let me know if i should revert back the memory changes or is there anything else i could do.
Please help us resolving it because the performance is going worst.
Regards,
Muneer.Pl do not post duplicates - Oracle Apps Database severe Performance Issue
For all critical production issues, pl work with Support thru SRs - using the forums to troubleshoot production issues is not wise -
Hello,
I am running PPRO CS6 (6.0.3) on Windows Vista
I am having a duplicate asset import issue. Let me explain...
I have a couple of Premiere Pro project files with multiple sequences in each. In each of the project files I have the same source video files imported as the some of the sequences in each of the project files reference the same source video file.
So here it was is happening...I have a project file with sequences 001-025 in them and I have have another project file with sequences 026-050. I have 25 sequences per project to keep the project sizes smaller and more manageable so my system doesn't choke.
Sequences 014 and 015 in the first project file both reference "Video01.avi" which is located on my external F: drive. I want to import sequences 027-030 from the second project file which both reference the same "Video01.avi" file on the same drive.
I know PPro is intelligent enough to know when importing assets from another project file that shares the same assets as the project you are importing into, it knows to only import the dependent assets which are not in the project file you are importing into. I have done this countless times and PPro has correctly only imported the assets it needed.
However for some reason when I am trying to import the above mentioned sequences from one project into another it is bringing in a duplicate copy of the source footage necessarily. I can't figure out why it is doing this. The sequences it is importing both reference the identical file on the same drive, etc. And I am using the "Import Selected Sequences" option.
Thank you,
ShaneI think I have solved my own issue. As stated above when I was trying to import sequences from another sequence it was brining in a dup copy of the same clip in the sequence. I was able to successfully have it not do that.
What I realized was happening is that even though the source footage video file is identical in each project file, when I opened it up the clip in the source monitor I had different IO points set for each version of the clip in each project. PPro I am assuming imported the second copy to preserve the IO points on the second version of the clip that was being imported.
I simply cleared each set of IO points on each reference of the clip in the project file and I was able to import the sequences I wanted without bringing in an additional copy of the source clip. So now I just have one copy of "Video1.avi" in my project file instead of multiple.
Hope this helps someone in the future who may be experiencing a similar issue.
Shane -
Severe performance issues in production database
Hi Experts,
we have configured RMAN in our production database recently using some 3 party tool COMMVAULT.
Problem is just 47 GB database taking around 6 hrs of time to complted the bakcup job. Please let me know what could be the reason.
Further to this issues i found out some of few things, our application vendor commissioned this database server and it seems that they done some changes in TIMEZONE settings.
when i query against some of few dictionary tables for example dba_schedular_jobs i am getting the following error.
ORA-01882: timezone region %s not found
when ever i connect the database , the connection itself is very slow and suffering severe performance issues in my production database.
You help would be much appreciated.
Regards,
SalaiHi,
also let us know if you use asm or local file system for datafiles.
Your backup strategy will also be helpful:
Do you make compressed backups?
Full or incremental?
To where do you backup the database? To the local filesystem, SAN Volume, Offsite Storage, Tape storage?
Is there any other jobs running while the RMAN job is running?
Please post the stats that you have gathered over the time period when the backup is running.
Thanks. -
Severe Security Issue with Sharing Permissions and Windows
I recently discovered a severe Security issue with the windows sharing an permission settings:
I have two users, an admin user and a parental controlled user. On my mac mini, i have a external harddrive connected. On the harddrive, i have three folders, Itunes, Iphoto (Package) and a Temp Folder. I want to share the Harddrive RW for the admin, but only R for the parental user. But the Temp folder should be accessible for RW for the parental as well.
1. I set the Drive checkbox "ignore ownership" off.
2. I set the permissions of the drive to admin RW, parental R and Everyone to "no access"
3. I apply to enclosed Items
4. I set the permission of the Temp folder to admin RW, parental RW and Everyone to "no access"
5. I apply to enclosed Items
6. I go to "File Sharing" in the Preferences and activate SMB sharing for both users
7. I delete all previous shares
8. I add the Disk and use the proposed permissions which are admin RW, parental R, Everyone "no access"
9. I add the Temp folder and use the proposed permissions which are admin RW, parental RW, Everyone "no access" - Funny, there is a new Group called "Temp" created which has custom access on both sharepoints
10. I connect to the mac over a Windows machine (NTLM auth set appropriatly). Now I try to create a folder on the root of the Disk share, I get a denied message.
BUT WHEN I GO INTO A SUBFOLDER (eg. ITUNES or IPHOTO), WHICH HAS ALSO JUST "R" PERMISSION FOR THE PARENTAL USER, I AM ABLE TO RW, DELETE AND DO EVERYTHING!!!
TO RECAPITULATE: THE SHARING PERMISSIONS ARE "R", AND THE FILE PERMISSIONS IN THE RESPECTIVE FOLDERS FOR THE RESPECTIVE USER ARE ALSO JUST "R". BUT THE USER CAN DO EVERYTHING IN THE SUBFOLDERS!!!I recently discovered a severe Security issue with the windows sharing an permission settings:
I have two users, an admin user and a parental controlled user. On my mac mini, i have a external harddrive connected. On the harddrive, i have three folders, Itunes, Iphoto (Package) and a Temp Folder. I want to share the Harddrive RW for the admin, but only R for the parental user. But the Temp folder should be accessible for RW for the parental as well.
1. I set the Drive checkbox "ignore ownership" off.
2. I set the permissions of the drive to admin RW, parental R and Everyone to "no access"
3. I apply to enclosed Items
4. I set the permission of the Temp folder to admin RW, parental RW and Everyone to "no access"
5. I apply to enclosed Items
6. I go to "File Sharing" in the Preferences and activate SMB sharing for both users
7. I delete all previous shares
8. I add the Disk and use the proposed permissions which are admin RW, parental R, Everyone "no access"
9. I add the Temp folder and use the proposed permissions which are admin RW, parental RW, Everyone "no access" - Funny, there is a new Group called "Temp" created which has custom access on both sharepoints
10. I connect to the mac over a Windows machine (NTLM auth set appropriatly). Now I try to create a folder on the root of the Disk share, I get a denied message.
BUT WHEN I GO INTO A SUBFOLDER (eg. ITUNES or IPHOTO), WHICH HAS ALSO JUST "R" PERMISSION FOR THE PARENTAL USER, I AM ABLE TO RW, DELETE AND DO EVERYTHING!!!
TO RECAPITULATE: THE SHARING PERMISSIONS ARE "R", AND THE FILE PERMISSIONS IN THE RESPECTIVE FOLDERS FOR THE RESPECTIVE USER ARE ALSO JUST "R". BUT THE USER CAN DO EVERYTHING IN THE SUBFOLDERS!!!
Maybe you are looking for
-
JBO-26061: Error while opening JDBC connection, null password given; logon
Dear all, i have this problem and am trying to solve it since 4 days and still the same the problem is when i create a new project every thing works fine but what happen is when i change the connection or create new Connection in the bc4j, this what
-
Save_text function module for multiple entries
HI friends, Iam facing a following senario. Iam using save text function module ie: save_text to save the sales text for the line items in va01 transaction. Iam able save the text for single entry but iam not able to save the text for muliple entrie
-
Theres very little sound coming from my speaker and people cant hear me i phone 4
theres very little sound coming from my speaker when i play music and ringtone it was working fine last night also when its going straight to voicemail when people ring but then coming through as a missed call, then when i recive calls i can hear peo
-
URGENT!!!!! JDev is not showing my project (when I opened it this morning)
Hello All, I am using JDev 10.1.3.4 for the last 3 months and all was well. I worked in it yesterday night and everything was working as expected. I saved my work before logging off and when I opened it this morning, I don't see my application/projec
-
The title pretty much describes the query. I do not want to use any other sort of file converter to pull the RAW files into Lightroom or the like. I am hoping that Adobe will answer. Cheers, Keith.