Several issues on new AT300-101

Hey guys.
I bought an AT300-101 a week ago, and I have some problem with it.
First:
I cant make a mass storage mode. Did i miss something? Or i need a special cable to connect to pc and copy files to the tablet (the manufacturer cable does not work?)
Second, its bigger problem:
The battery life is below average.
Browsering the internet via Wifi, with full brightness, and its over in 5 hour?
Or 2-3 hour bad piggies, angry birds, some gmail chat, and skype (this situation hold 4 hour)
and need to recharge.
It's normal? Or the tablet gone wrong?
Third:
How can i change the video resolution to better then 320, or 240. (In PC can be) in the youtube app, or somewhere? It looks terrible. Always play in the worst quality.
I hope somebody help me.
ps.: sorry for my bad english.

> I cant make a mass storage mode. Did i miss something? Or i need a special cable to connect to pc and copy files to the tablet (the manufacturer cable does not work?)
The AT300 supports the micro USB port. This port allows AT300 acting as a host or client. When acting as a client you can use this port to connect the tablet to a pc for data transferring.
If acting as a host, you can connect other portable devices like USB flash drive, USB HDD (only FAT) USB hubs powered by an AC adaptor, HiD (keyboards & mouses)
To connect table to PC plug the micro USB connector into the micor USB port and the other end of USB cable to the PCs USB port. The tablet should be recognized as a removable MTP (media transfer protocol) device or PTP (picture transfer protocol)
>The battery life is below average.
>Browsering the internet via Wifi, with full brightness, and its over in 5 hour?
The battery should be calibrated.. this means that you should charge and discharge the battery several times in the row. Furthermore decrease the display brightness and cancel the processes and apps runing in the background
>Third:
>How can i change the video resolution to better then 320, or 240. (In PC can be) in the youtube app, or >somewhere? It looks terrible. Always play in the worst quality.
You cannot change the tablet resolution! If you use a single apps for video watching, check if such app provides such option. But from my knowledge the Android OS uses the resolution provided by the tablet display.

Similar Messages

Several Issues on new Satellite laptop

I purchased a Toshiba Satellite C55D-B5203, part #PCSN4U-02U01U within the last month and I am having several issues with it. It came with Windows 8 and immediately updated to 8.1. As far as I am concerned, I am a computer dummy. So, any replies, please be very basic.1. When I first boot up the laptop, the keyboard will not work. The only way I have gotten it to work is to hold down the right shift key for about 30 seconds. This works but I dont feel like I should have to do this every time I start the computer.2. Occasionally, when I type a website in the search engine, it just refreshes and stays on the current page. Example: Home page is Yahoo.com, I type in google.com. It will let me type the website, but the processing circle goes around and just stays on yahoo.com. I have even tried searching for a site in search engine on the webpage and it still does not work. After 10 or 15 attempts, I can typically get it to start working. 3. Videos - more times than not, when a video pops up, like on facebook or youtube, the screen turns green. The audio will play but no video. I tried going to Internet Options, Advanced, and making ure the top checfk box is checked. It is. Still nothing. I have even tried unchecking the box and then it will work for a little bit. I would reset back to factory default but I have purchased office and quicken that I downloaded (don't have a hard copy) and i don't want to have to buy them again. Can anyone help? I am about ready to throw this laptop in the trash and try a different brand. I appreciate any help

This issue is closed. I upgraded to Windows 10, made a couple of changes and have not had any issues since.

Severe issues with new iMac. Do I need firmware update?

I purchased a new iMac at the end of September 2007. It still had Tiger on it and ran fine. I upgraded to Leopard at it's release and have had some problems ever since BUT THEY ARE GETTING WORSE.
I did a complete erase and install this past weekend but problems remain. I have to do a force shutdown with the power button sometimes and then things run slowly. I use Disk Warrior and rebuild the drive and also repair permissions and things seem to run fine for awhile. THEN the problems start again.
I know there is to be a Leopard update soon. Should I wait and see if that solves the issues? I also know there was a firmware update for the new iMac in the fall. When I did my erase and re-install this past weekend, I didn't do that update UNLESS it's already in the 10.5.1 update. Should I do it now?
I also recently got a LaCie 250 gig firewire hard drive. Sometimes it does not mount; but I've ran Disk Warrior and repaired permission on it also and no errors are reported. (I also have a 60 gb FireLite. It did not mount once; but mostly it's the LaCie that fails to mount ... but not always. 75% of the time it mounts fine.)
I just don't know what the problem is. I am very frustrated. I have NEVER had trouble like this with a Mac in all the years I've had one. I know one things for sure. I will NEVER again buy a new machine or operating system until they've been out at least six months
Any knowledgeable suggestions are much appreciated. Thanks so much.

My problems are: 1)Sometimies when I try to restart the computer, I get either a spinning beach ball or a blue screen and nothing else. OR sometimes it does re-start but keeps the other spinning circular thingie going. In either case, I have to push the power button for a few secons causing it to shut down hard. On the other hand, sometimes it behaves normally.
Other problems include slowness, such as finder windows opening very slowly or files showing up in finder windows very slowly.
I don't notice that this happens with any particular program. It seems sporadic. Sometimes the computer runs fine and then all of a sudden, the issues reappear.
I have used Disk Utility, Disk Warrior, repaired permission, etc. All the programs report that the discs are fine (the internal disc, the LaCie drive and the FireLite drive.) I did a complete erase and re-install. I have not used a hardware test disc. (I suppose there is one with the original restore discs; but I am using Leopard now so I'm not sure how that works. That was Tiger.)
I have suspected a lot of things. I stopped iDisk automatic mounting & syncing. I stopped syncing altogther. I've turned off Spaces and Time Machine. I don't let any programs load automatically except the bare minimum. I'm just very frustrated.
I did hear there was a firmware update in early November but 10.5.1 was released after that; and I have done all the software updates so I don't know if I need to do the firmware update. (This machine is one of the new thin aluminum iMacs introduced in August. I got mine in September.)

I have several issues that I hope you can help me out with. I am a professional photographer with a Mac with OS X 10.9.4: - I can only make ONE contact sheet in CS6 (from AUTOMATE) from pictures indicated in Bridge. If I want to make another contact sheet

I have several issues that I hope you can help me out with. I am a professional photographer with a Mac with OS X 10.9.4:
- I can only make ONE contact sheet in CS6 (from AUTOMATE) from pictures indicated in Bridge. If I want to make another contact sheet I need to shut down and restart CS6.
- Camera RAW: if I change any setting in Camera RAW (except exposure), having first optimized the exposure, the exposure will automatically return to zero. Sometimes when I've set exposure and cropped the picture in Camera RAW Plug-In, the effects are lost just by opening the picture in CS6.
- Sometimes if I crop a picture in Camera RAW, it may be impossible to open it again from Bridge!
- I cannot do lens corrections in Camera RAW, at all. The Camera RAW comment is that "it cannot load the correct lens type". Why?

Are you writing that when you select a large number of images in the bridge like a hundred thumbnails when you then use Bridge menu Tools>Photoshop>Contact Sheet II that Photoshop only produces a single contact sheet for the first few thumbnails and fails to produce additional contact sheets for the other selected thumbnails? Photoshop contact sheet II script should create as many contact sheet as needed for the numbers of thumbnails selected. Perhaps the script is hung or you have exhausted your machine resources.
ACR Crop tool does not crop the RAW file it records crop settings to be used during the conversion process. Camera RAW DATA is not altered. The only changes made to RAW Files is ACR Metadata may be added. Anything you do in ACR can be un-done in ACR. If you can not open a RAW File in ACR the Files is either corrupt or from a new camera ACR does not support yet. ACR should not corrupt RAW files.
If you do not have a lens profile for ACR I think you should still be able to do lens correction manually in ACR.
Some of what you write I don't follow could you post some screen captures of your problems often a picture helps.

Several issues - are they related?

I've been experiencing several issues with my new IMac, and I wonder if they are related.
First, the Adobe Flash plug in for Safari has been quitting unexpectedly. Then, Safari would start closing on its own. Finally, IPhoto also would suddenly quit.
This morning, I tried a manual update of software. It stopped about 3/4 of the way through with a message that the update may have been corrupted. It will try the install again the next time Updater runs.
I thought of putting these issues out there on their respective software forums, but I am guessing that they are all related since they all happened at the same time. Thank you, in advance, for any clues you can give to solving this mystery.

Hi-
Please clarify- which iMac are you using? One of the new 27" or 21" iMacs? If not, what exactly?
First, the Adobe Flash plug in for Safari has been quitting unexpectedly. Then, Safari would start closing on its own. Finally, IPhoto also would suddenly quit.
What exactly is happening here? Is some flash playing, and then suddenly without any error message Safari quits? What website? All or just some (or random?)
Immediately after safari quits, iPhoto also quits? No error message- it just quits?
This morning, I tried a manual update of software. It stopped about 3/4 of the way through with a message that the update may have been corrupted. It will try the install again the next time Updater runs.
Please explain- exactly what do you mean by 'Manual Update of software?" Exactly what file did you download from Apple.com to do this manual update?
I thought of putting these issues out there on their respective software forums, but I am guessing that they are all related since they all happened at the same time. Thank you, in advance, for any clues you can give to solving this mystery.
There are a lot of variables going on here- maybe it is all related, or maybe not. We need to isolate some of these variables so we can troubleshoot in a systematic way.

Several problems with new itunes??!!

Getting much of the same issues with new version of itunes. Printing up cd covers, the playlist gets all jumbled up for some reason. Also, the thing that really gets me livid is before you used to be able to randomize your playlist and the order would change. This was cool if you were going to burn a cd and just wanted a random order different than the order you put the songs in your playlist. Now it seems you have to move the songs around instead of itunes "shuffle" changing the order for you. The shuffle does work for playback but not when you want to burn your cd in a different random order like the old itunes used to. I also used to like the old itunes that would show the cd artwork bigger during playback. Now it doesn't seem to have that feature. "Recently Played" folder doesn't appear to work as well. Itunes Store appears to be much slower while searching for music and tends to freeze up a lot. Sampling songs in the store also seems to need to "rebuffer" way more than the old version. Most of the time, I don't mind the updates. It takes some time getting used to it but eventually it gets easier. This update, however, I am not very happy with. Especially not being able to shuffle my "playlist" order. That ***!!

looks like this is a known issue for the album covers printing jumbled. several work arounds would be to try print in black and white theme. You can also try to save as a pdf and print from another application like word or paint or something

No updates for AT300-101

I have a AT300-101 and the android version of this powerhorse is still 4.1.1.xxxxx, no updates, why?
I'm begining to develop android aplications, turn the usb debugmode, and nothing!!!! I'm in windows 8.1 x64!,
With my nexus4 i plug the usb cable and "voila"! I get the device ready!!!
What do you expect,
TOSHIBA PEOPLE, wake up!!!!
Daniel Reis

This is user-to-user forum.
I don't think you will get more information and details about the update philosophy from forum members and Toshiba enthusiasts.
But fact is that updates are available via Service Station and Toshiba provides updates for different devices.
Im owner of new Excite Pro and yesterday I received an update to Jelly Bean 4.3

Macbook 2009 Not working properly [Error -50 and other several issues]

Hello there!
I am having several issues with my Macbook, they all showed unexpectedly. Most applications would not work, such as Disk Utility or Pages. Safari couldn't load any webpage, just after a long time it was able to display them. Also, I was having some kind of error -50 when trying to move or delete any file, and iTunes was showing the following message; "iTunes can't verify the identity of the server "ax.itunes.apple.com". The certificate for this server is invalid. You might be connecting to a server that is pretending to be "ax.itunes.apple.com". I couldn't turn off the computer either, when I tried to doing so it wouldn't do anything, I had to press the power button to turn it off. After that, I turned the computer on, everything showed up as normal but after a few seconds later the computer suddenly turned off, I tried again but I got the same result. Afterwards, I tried in recovery mode, and weirdly, it didn't show any problem. I ran disk utility and verified the hard drive but it says it's working perfectly. The SMART status also says the hard drive is fine.
What could this mean? All these problems appeard suddenly, I've never had any of those issues before.
I have a late 2009 Macbook with Mavericks Installed,
4GB of RAM,
A 320GB Seagate Hard drive,
And a 250MB Graphics Card.
Thanks for your help!

Hello there!
Thanks for your reply! I have no anti-virus software installed, but I have (rather said, had) CleanMyMac though. I installed the demo version and ran it only once. I was curious about it, I had no idea it could make as much damage as MacKeeper.
Also, I scaned again my internal Hard Drive with Disk Utility using the OS X Installation DVD, and according to the report, the partition where the operative system is located is corrupted. Disk Utility tried to repair it but failed, and the most reliable option was to reformat the disk. I proceeded to reformatting it but unfortunately the process was not succesful - I got an error that reads; "POSIX reports: The operation couldn’t be completed. Cannot allocate memory". I tried to reformat the disk using the terminal, but I was only able to erase it, not to format it. I did a research and I found out the problem might be the SATA cable, (https://discussions.apple.com/thread/3507546).
Could that explain also the weird behaviour when I was using the computer? I guess my best bet now is to get a new SATA cable.

On-Going Issues with New Serviices - New Verizon Customer

Good evening. This is the 1st time that I've had to voive my frustrations and disappointment on a forum but I don't know what else to do. I have only had Verizon Fios for 6 weeks and I have yet to watch anything on TV since no imformation is being filtered to my TV; I keep receiving Set-Top box is off-line. My Internet and phone services were spotty in the beginning but they are working great now. I've had 3 different technicians visit my residence to re-install the boxes, router, cables, and I had all-new equipment again. However, I'm still having issues in with the Program Guide and all Menu options are still unavailable.
However, nothing has worked and I've exhausted all possible resolutiions to no avail. The last technician was at my residence for 7 hours last week and had to call Verizon's tech support, It was determined that it was something on Verizon's end that they needed to fix. It's been over a week, and I have yet to hear anything on my current open Help Ticket. Has anyone had any serious issues with their services when they first signed for FIOS? I'm at the point that I am seriously considering cancelling my services even though I already made 2 payments against my account. Most of my friends, new neighbors and family members have FIOS and rave how great it is, and constantly talk about all the movies on On Demand. Unfortunately, I can't relate because I can't access anything on my TV. It's a pain in the **bleep** when you are trying to watch something but you have no idea what the hell you are watching because the Program Guide is unavailable, including the rest of the Menu options. I really would hate to cancel all of my services but I'm at a loss at what to do anymore. Has anyone experiences severe issues in which they had to cancel their services because Verizon was unable to solve the issues? Thank you for your attention and time in this matter.

Since we haven't heard back from you as requested in your private support case, it appears you do not need further assistance. It was our pleasure to help get this squared away. Please make a new post anytime you need our assistance.
Anthony_VZ
**If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan

Several issues with iTunes syncing

Okay so I have an iPhone 4s 32GB iOS 6.1.2. an recently purchased a new windows 8 laptop that has iTunes 11 on it. I find several issues and have not been able to resolve so hopefully someone will have some suggestions.
1. iCloud will not back up contacts
2. iTunes will only show 11 of my 200+ purchased songs
3. iTunes sync over wifi shows my old laptop (which I removed before syncing with new computer) but will not show the new laptop.
4. After I purchased about 5 new songs and a few apps I attempted to sync with iTunes on the new laptop and while all my songs and apps from my last sync are there I cannot get the new items to sync back to iTunes no matter what I do.
I have turned off iCloud and backed up to iTunes via USB but still nothing is working. I have seen lots of other forum posts here and all over the web but none of the problems or solutions seem to fit my situation exactly. I am hesitant to reset the phone because I dont want to loose my contacts or the new content I have purchased. Any help would be awesome.

UPDATE. I did a reset and it did remove the old computer from my Wifi Sync screen but now my personal hotspot option is gone, I cannot connect to wifi at all and I still cannot get the phone to sync to iTunes.

Several issues with CS3

I have several issues with CS3. When I used Contribute 2 I
had no problems with the following.
1. I've imported from Word & copy & pasted but when I
align photos left, text on right and then publish, the pages goes
kookie and all out of alignment
2. Not able to resize/change color of text on master page but
am able to only when I make a new page
3. I get spaces between lines when I don't want them and
can't get spaces or move text over when I want to
4. I noticed that on my edit pages, sometimes the content
changes font size but it's okay when published
Can anyone help ? Thanks

On 7/1/07 11:52 AM, in article
[email protected], "Jean Y"
<[email protected]> wrote:
> My web guy did the following <<I updated the style
sheet and changed the text
> on the Conference page. The style sheet serves as a
template for the text on
> the page. In order for that to work, you need to make
sure that when you're
> editing text in Contribute, you do not select any other
paragraph style (Style
> 1, Style 2, body,etc.) for your text. If you do, the
text will be black.>>
That's right. If you type text and select one of the
available styles, fine.
But, as soon as you try to change color, font size, or any
other attribute,
Contribute will create a new style all on it's own.
> You mentioned <<someone has marked that text to
override the style sheet and
> turn it black >> I know nothing about changing a
style sheet and don't know
> what he means by 'editing text in Contribute'.
I looked at your style sheet. You only have white and black
as font colors.
The red color is a result of a Contribute-created style
(style 4) in one
instance and a font tag in another instance.
> As my web guy was only supposed to change the color and
width on our front
> page and make 2 pages public from the members only area,
these changes seem to
> have occurred on their own. There were also photos that
disappeared and others
> appeared in their place. I had to manually replace those
images. I usually cut
> and paste documents/images onto the web pages, althought
I discovered the
> 'insert word document' and did that on a few pages. At
times I want text in a
> color and that's always worked. These issues I'm having
I've never had before
> I
> changed to CS3, not upgrade but full version, and the
web guy then made the
> requested changes and then the problems showed up. My
web guy is not always
> quick to deal with changes or issues and does this as a
side line, as I guess
> a
> lot of guys do, which is frustrating at times. So the
site didn't show the
> visual problems, I cut and pasted the correct color text
into place.
>
> I've reviewed the pages that allow font size and color
changes with the admin
> choices, with the pages that don't allow these changes
and see no difference
> in
> the admin choices.
>
> Any other idea of what the problem may be ? Thanks for
any and all input.
>
The code doesn't really look all that good. For instance, on
the Conference
page, it looks like, for the photo cutline, you simply hit
the space bar to
move the text over to try to center the cutline below the
photo. You -could-
just create a centered style or tell Contribute to center
that paragraph and
it should create a centered style for you.
When I paste from a Word doc, I try to paste as unfomatted
text.

Several issues with iPod touch. please help!

Ok. So i have several issues going on with my iPod touch. i got it for Christmas in 2010, i have recently updated it. after the update these issues have happened.
1. Screen won't rotate. Photos won't rotate. The screen won't rotate for horizontal keyboard use. Even for some apps that you have to rotate the screen, it just wont rotate. i have tried everything! i have read other discussions about this issue and they said there is a lock with an arrow around it in the top right corner, in my ipod there is not.
2. After i updated my iPod i noticed about 20 of my songs went missing! they are no where to be found on my iPod AND my iTunes! I purchased all of those 20 songs and am kind of mad they randomly disappeared. i have looked in every place a song could be and they are not there.
3. I have recently downloaded some apps and wheni went to try them, they would almost load and then crash and go back to the home screen. a bunch of my apps do that now. i have tried restarting my iPod and i have tried to open the apps like a million times and everytime they crash and goes to the home screen of my iPod. they are all free apps. some of the apps are: Impossible Test: summer, angry birds, angry birds: rio, angry birds: seasons. some of them i have been able to play a couple times, then they randomly stared crashing.
someone please help me with these problems! thank you!

For #1:
- Have you restored the iPod from backup?
- Have your restored the iPod to factoery defaults/new iPod?
If restoring from backup does not solve a problem then your likely have a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
For #2:
If you are in the USA and using the latest iTunes then you can redownload music via the iCloud beta. See:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Otherwise you can contact iTunes and they MAY allow a redownload. See:
Apple - Support - iTunes
For #3:
Try:
iOS: Troubleshooting applications purchased from the App Store

Iphoto6: several issues: 1st my library is so messed up, everytime I delete a photo, in the next moment I look at a file the deleted photo has quadrupled, as with files, dates wrong

iphoto6: several issues: 1st my library is so messed up, everytime I delete a photo, in the next moment I look at a file & the deleted photo has quadrupled, as with files, dates are all wrong, missing a few years.............

Sounds like your database is damaged.
Try these in order - from best option on down...
1. Do you have an up-to-date back up? If so, try copy the library6.iphoto file from the back up to the iPhoto Library allowing it to overwrite the damaged file.
2. Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
3. If neither of these work then you'll need to create and populate a new library.
To create and populate a new *iPhoto 6* library:
Note this will give you a working library with the same Rolls and pictures as before, however, you will lose your albums, keywords, modified versions, books, calendars etc.
Move the iPhoto Library to the desktop
Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
Go into the iPhoto Library on your desktop and find the Originals folder. From the Originals folder drag the individual Roll Folders to the iPhoto Window and it will recreate them in the new library.
When you're sure all is well you can delete the iPhoto Library on your desktop.
In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption.
Regards
TD

Multiple issues with new installation

I have several issues with my fresh installation of arch (just got myself a free old-as laptop , thus trying out arch for the first time as I usually run gentoo), and I'm not sure where these should go. I figure that I may as well lump them all at once while I'm at it.
The laptop model is a Toshiba Dynabook TX/430DX Japanese laptop similar to a Tecra A2 afaik.
1. If I use stock ARCH kernel, when I load up x11 it seems to be using some wrong drivers or something. Tried with and without xorg.conf. The screen is all fuzzy etc. However, I compiled my own kernel (the Zen sources), took out a whole bunch of drivers I knew I wouldn't be using (etc. SATA/IDE/extra whatnot so that it would merely take 3 hours to compile the kernel), x11 works fine. HOWEVER with the zen sources, when I close x11 I can't exit to console. I get some sort of weird artefact from what happened to be on the screen, or it just goes black. It does actually seem to be in console as I can turn off the laptop with ctrl.alt.del and the capslock etc seems to work fine. I'm thinking of recompiling the zen sources with the stock arch kernel config when I have the time just to see what happens, but I'm not too sure it'd help.
The VGA device is an: Intel Corporation 82852/855GM Intergrated Graphics Device (rev 02), using the intelfb module.
2. In most consoles I've used, if you type in part of a command then press ctrl.up/down, it autocompletes with previous commands you've run matching what you've already entered. However, in my install it brings me to the very first command in my bash history. How do I make it autocomplete previous commands?
3. When I use wvdial (I have a mobile modem), I get odd characters as shown in the screenshot posted.
I don't think it's a unicode issue, as ncmpcpp displays properly. This displays itself both in the console and in x11 (screenshot).
4. If I'm using the stock kernel and I stop wvdial, I get a whole bunch of kernel error trace messages. After this, anything that goes to dmesg will be displayed to whatever terminal I'm on (but not actually echoed, it gets overwritten if I change screen etc). Wvdial is also prone to crashing, sometimes taking out the whole laptop. However, while using the zen kernel I do not suffer this issue at all.
Any help in helping me find the source of these issues would be greatly appreciated. They're not showstopping issues, but extremely irritating nonetheless.
Thanks in advance.
EDIT: I created a zen kernel based on the arch stock kernel. Unsurprisingly, I still suffer from the x11 video issue. However, I don't have issues with number 4.
Last edited by ugugii (2009-06-14 00:57:37)

People are probably going to want to know the make/model of the lappy before they can
help.
Deej

I have an Airport Extreme as my router and am using time capsule to extend the network in my new house. My ISP is only providing me 4-5 ip addresses and wants me to set up my router to issue out new ip addresses for all my devices.How do I fix this?Help

I have an Airport Extreme as my router and am using time capsule to extend the network in my new house. My ISP is only providing me 4-5 ip addresses and wants me to set up my router to issue out new ip addresses for all my devices.How do I fix this?Help.
They said I need to change my settings to NAT settings. I haven't been able to figure out or find anything. I have also spoken to Apple Support on the phone for hours without being able to figure out how to do this ( i don't think he knew much either lol.) Please help me because I've got about 15-20 devices in my house that require to be connected to the internet and this is just making things ridiculously slow and painful for me.
Thanks!

It is on DHCP & NAT under router mode yet my isp is still the one issuing ip addresses to my devices instead of the router issuing them

Several issues on new AT300-101

Similar Messages

Maybe you are looking for