Several issues with Satellite A100-569

Hello fellow toshers :)
I got a a100 569 laptop from a catalogue last may, last month it had to go off for repairs as the screen kept going blank and had to use the power button to shut it down and restart it again, also excessive paging issues along with my computer screen having a sort of mini earth quake.. so off it went and been back a week and these issues are still happening, i understand i they fitted a new hard drive and some circuit board.
I also have noted that I cant seem to get any upgrades from toshiba anymore regarding memory expansion.. this laptop is not even one year old so would appreciate any help this forum may be able to give me.
I will be ringing Toshiba up first thing tomorrow about the laptop still being faulty, also the online warranty facility doesnt recognise my serial number? very odd.
cheers people

Ta for the reply.. will try and phase question better but cant guarantee it ;)
I am thinking that 512mb is too low for vista to run properly without any glitches and need to know what MB in need and where to get it.
The issues I am still having is the screen going blank, only way to sort it is to hold down the power button for 5 secs then switch it back on.
Also the page shakes every now and again like a mini earthquake scene one sees at the movies or on the telly.
the laptop is or should be still under guarantee so really toshiba should sort it or give me another laptop.
when I run a systems health check the results say my laptop has excessive paging errors, steps i have taken is to increase the VR from 1024 to 3072 and turn off system restore but it still has excessive paging issues.
I want my laptop to run the way I paid for it to, and that is a laptop that can run windows vista basic without any issues, I am not happy with my laptop only 9 months old and having problems.
so basically i want to know why i am having the above problems and is/should 512mb be enough ram to run vista basic edition or have toshiba sold me a computer that is only up to half the job, if I do need to add more memory where can I get it from and what type as toshiba dont seem to offer any product support for my 9 month old laptop anymore.
thats the best i can do hope it is all crystal :-)

Similar Messages

Several issues with CS3

I have several issues with CS3. When I used Contribute 2 I
had no problems with the following.
1. I've imported from Word & copy & pasted but when I
align photos left, text on right and then publish, the pages goes
kookie and all out of alignment
2. Not able to resize/change color of text on master page but
am able to only when I make a new page
3. I get spaces between lines when I don't want them and
can't get spaces or move text over when I want to
4. I noticed that on my edit pages, sometimes the content
changes font size but it's okay when published
Can anyone help ? Thanks

On 7/1/07 11:52 AM, in article
[email protected], "Jean Y"
<[email protected]> wrote:
> My web guy did the following <<I updated the style
sheet and changed the text
> on the Conference page. The style sheet serves as a
template for the text on
> the page. In order for that to work, you need to make
sure that when you're
> editing text in Contribute, you do not select any other
paragraph style (Style
> 1, Style 2, body,etc.) for your text. If you do, the
text will be black.>>
That's right. If you type text and select one of the
available styles, fine.
But, as soon as you try to change color, font size, or any
other attribute,
Contribute will create a new style all on it's own.
> You mentioned <<someone has marked that text to
override the style sheet and
> turn it black >> I know nothing about changing a
style sheet and don't know
> what he means by 'editing text in Contribute'.
I looked at your style sheet. You only have white and black
as font colors.
The red color is a result of a Contribute-created style
(style 4) in one
instance and a font tag in another instance.
> As my web guy was only supposed to change the color and
width on our front
> page and make 2 pages public from the members only area,
these changes seem to
> have occurred on their own. There were also photos that
disappeared and others
> appeared in their place. I had to manually replace those
images. I usually cut
> and paste documents/images onto the web pages, althought
I discovered the
> 'insert word document' and did that on a few pages. At
times I want text in a
> color and that's always worked. These issues I'm having
I've never had before
> I
> changed to CS3, not upgrade but full version, and the
web guy then made the
> requested changes and then the problems showed up. My
web guy is not always
> quick to deal with changes or issues and does this as a
side line, as I guess
> a
> lot of guys do, which is frustrating at times. So the
site didn't show the
> visual problems, I cut and pasted the correct color text
into place.
>
> I've reviewed the pages that allow font size and color
changes with the admin
> choices, with the pages that don't allow these changes
and see no difference
> in
> the admin choices.
>
> Any other idea of what the problem may be ? Thanks for
any and all input.
>
The code doesn't really look all that good. For instance, on
the Conference
page, it looks like, for the photo cutline, you simply hit
the space bar to
move the text over to try to center the cutline below the
photo. You -could-
just create a centered style or tell Contribute to center
that paragraph and
it should create a centered style for you.
When I paste from a Word doc, I try to paste as unfomatted
text.

Windows vista issues on Satellite A100-036

Hi. I have a Toshiba satellite A100-036 laptop with windows vista home basic 32 bit and I have the following problems.
1.They replace me the hard disk at a store. I only have the Toshiba recovery dvd that I used to format the windows. They told me that I can't use it any more because the restore partition of the disk is lost. If I want to do a format again what do I have to do?
2. Every time I turn on the laptop the touchpad scrolling doesn't work. I go to control panel > mouse and it shows me this message: "Unable to connect to synaptics pointing device driver. If you have installed another PS/2 pointing device driver please unistall the synaptics driver by clicking on the yes button. You then need to reinstall your pointing device driver for your external device again. Do you want to unistall the synaptics driver now?" I click No and after that it works again and the synaptics pointing device icon appear again in the task bar. If I restart the laptop it doesn't work again and I have to do the same things.
3. Every time I turn on the laptop the bluetooth doesn't work and the bluetooth icon doesn't appear in the task bar. I have to go to device manager, unistall the driver, go to control panel > bluetooth local com and it works again. Every time I turn on the laptop I have to do this.
4. Every time I turn on the laptop the security center is turned off and I have to turn it on or the automatic updates are off and I have to turn them on.
5. Some times it doesn't install the automatic updates and it shows me the error code 8000FFFF.
Could anybody help me? Thanks.

> 1.They replaced me the hard disk at a store. I only have the Toshiba recovery dvd that I used to format the windows. They told me that I can't use it anymore because the restore partition of the disk is lost. If I want to do a format again what do I have to do?
If you have created the Toshiba Recovery Disk in the past, you can use it in connection with new HDD. The Toshiba Recovery Disk would set the notebook back to factory settings which mean that you will get installed Windows system, Toshiba drivers and additional software.
>2. Every time I turn on the laptop the touchpad scrolling doesn't work. I go to control panel > mouse and it shows me this message: "Unable to connect to synaptics pointing device driver. If you have installed another PS/2 pointing device driver please unistall the synaptics driver by clicking on the yes button. You then need to reinstall your pointing device driver for your external device again. Do you want to unistall the synaptics driver now?"
>I click No and after that it works again and the synaptics pointing device icon appear again in the task bar. If I restart the laptop it doesn't work again and I have to do the same things.
Go to Toshiba EU driver page and download the Synaptics touchpad driver. Install the touchpad driver and reboot the notebook. Usually this should fix your issue.
> 3. Every time I turn on the laptop the bluetooth doesn't work and the bluetooth icon doesn't appear in the task bar. I have to go to device manager, unistall the driver, go to control panel > bluetooth local com and it works again. Every time I turn on the laptop I have to do this.
This is strange. Usually the BT should work if BT stack was installed properly. Please note that you have to enable the BT using FN key (FN+F8). This combination enables and disables the WLan too. So ensure you did it correctly.
> 4. Every time I turn on the laptop the security center is turned off and I have to turn it on or the automatic updates are off and I have to turn them on.
Please check this: [Turn automatic updating on or off|http://windows.microsoft.com/en-us/windows/turn-automatic-updating-on-off#turn-automatic-updating-on-off=windows-vista]
> 5. Some times it doesn't install the automatic updates and it shows me the error code 8000FFFF.
[Error code 0x80000FFFF when you download updates on a Windows Vista-based computer|http://support.microsoft.com/kb/946414/]

Bluscreen issue on Satellite A100

Hi,
I just both a Satellite A100 - 788, 8 of 10 times when I am trying to play something in media player I get a blue screen with a message regarding a problem with a file called aativvaxx.dll .... Page fault in nonpage area..... I tried to find a newer driver for the ATI X1400 card but I didn't find any.
Please help!
Thanks in advance,
Eugen

Hi
Did you mean the ativvaxx.dll?
I found a useful page which provides a single .dll files:
http://www.afreedll.com/dll/info/ativvaxx_dll.html
You could try to download this file and could replace the old version with the downloaded version.
But you should firstly check if the downloaded file is a newer version and backup the file before replacing it with a new copy.
But generally you should always use the graphic driver from the Toshiba page.
If you want to use another drivers, you can do it at you own risk.

Several severe Issues with the Nokia 808 (camera, ...

Hey Guys,
I was a avid user of the Nokia N8 with its amazin camera features. So i made the switch to the 808. While the initial Impression was awesome, when traveling over the last few days my experience wasn't that great. There are several in part very severe issues i am having:
1st and foremost: the cameras automatic shutter speed is too low for nearly every shot. No, my hands are not too shaky, I've doing professional photgraphs since 10 years now and am able to shoot with 1/10th and lower. Yet, when enjoying a boat tour in Copenhagen and taking pictures of the passing scenerey, nearly all images have noticeable motion blur due to the slooooow movement of the boat. And this in bright daylight. The only way to bypass this was by using the sports mode - but then again you are limited to 5 megapixels. You can also notice the very long shutter time when simply taking a picture of your local metro station. MOst of the people walking by have motion blur.
This brings me to issue number 2: I really don't get why i am unable to influence the focus method. You get the Landscape and Sports mode (which use a fixed focus) but that's not available in the creative mode. So even when doing simple panoramic shots in the creative mode in 5, 8 or 34 megapixels the camera has to focus. Problem here: when shooting panoramic stills the focus sometimes decides to focus on a nearby person instead of the 'big picture'.
Issue number 3: When manually selecting a very low ISO value (for decent night shots) the Camera makes that artificial shutter sound WAY before the shutter actually closes. Therefore you THINK that taking the picture is already done and move the camera around. This results in awful images
Issue number 4: Battery usage is way to high on the 808. I was able to take my N8 around town all day, shoot over 300 (Yes, 300) images, do a bit of navigation, email, browse and tak without the battery being drained below 15%. I ran out of battery with the 808 after only 136 images, 15 mins of Navigation, Wireless Lan and 3G turned OFF. So the entire point of having a device that combines phone and camera and lasts all day is simply gone I had usage times of 3-4 days with the N8 (when not on vacation) - the 808 is drained after the first night under the very same conditions.
To sum it up - i'd like to see the following things fixed/added:
- Behaviour of the automatic shutter
- Option to manually select shutter
- Option to select different focus methods (on / off ) in creative mode
- BATTERY USAGE NEEDS TO BE IMPROVED!
- black on white color theme for email
- ability to select multiple images in album view like before
- ability to get additional information on the image like with the n8 when you press and hold and select 'details'
- Ablity to turn of autofocus in video mode
- when deleting an email while reading the email, display the previous mail instead of the inbox
Would be great to get some feedback from you guys on that!
thanks
-daniel
Solved!
Go to Solution.

Hello…I own an 808 PureView device. At the outset, I must congratulate you for creating such a marvelous device. It’s in all dimensions a brilliant Smartphone and has no major lags except a few which I would like to mention as suggestions to improve the general smoothness and usefulness of its User Interface (henceforth-UI).
The in-built gallery lacks ‘mark multiple items’ option which, if integrated, can be fruitfully used to delete or send multiple items though Bluetooth. Also, the in-built gallery lacks ‘renaming’ function which would otherwise be helpful in organizing the gallery items, and in giving custom names which are easy to remember and deal with.
The generic MUSIC PLAYER lacks the track/music search function from within the music player, and so, to search a song out of the vast collection, the user has to use the generic SEARCH application by exiting or minimizing the music player, which in itself is a cumbersome exercise. The search function, if integrated into the music player, will help a great deal in making the music experience really customized and precise as also time saving.
The in-built VIDEO editing options available in the video viewing dashboard are relatively much naïve and rudimentary as compared to PureView’s lesser predecessor, the N8. Now, since 808 is a full-fledged camera Smartphone, it is bit logical on part of the user to expect the video editing dashboard to be as efficient and complete as the photo editing dashboard of the same is. Advance options like adding music clip can be added to the video editing console to mitigate the need of using any third party application to do so, and thus, it will further enhance the utility drawn from the cell-phone UI in terms of video editing and viewing.
The generic MESSAGING application has the default view as CONVERSATIONS view and manual selection every time is required to switch the view to FOLDERS mode. If there had been an option to make a choice in setting the folders view or the conversations view as default as per users convenience, it would have been again a smooth messaging experience.
To end up, the generic CONTACT application lacks the facility to edit the contact labels unlike the one which was available in S60 V3 devices (I owned N79 prior to owing 808 PureView and so I am well aware of this utility). Facility to edit the contact labels makes it easy to differentiate between multiple contact numbers of the same contact so as to have an ease of remembrance and clarity of use.
I earnestly hope that Nokia will incorporate some or all of these suggestions in the next-to-come firmware upgrade for Belle FP1 devices. These modifications/additions, if done and made, will make the Belle OS fully competent with its various other contemporaries as it just lacks these things but otherwise is a fluid and extremely useful OS. I request you to kindly pay due heed and consideration to my observations and work towards making the Belle OS an all-encompassing mobile platform. Thanking You.

Several issues with iTunes Match

I recently bought the iTunes Match service. And I've run into several issues here.
1) The music in my library was purchased months ago with another Apple ID that I've forgotten. They're all currently available on iTunes Store with the same content (I've verified this). But when I tried to match these songs, 10 percent of them failed. For example, when I attempted matching Beyonce's self-titled album, which I bought on the day of its release, only "Pretty Hurts" successfully matched. The others are all in "Uploaded" status. This is very confusing.
2) I understand that recently there're a lot of songs being upgraded into "Mastered For iTunes" version. But some tracks (shown in Matched status) in my library were downloaded a long time ago and don't carry that quality. So I deleted the local copies of them, and re-downloaded from iCloud. But then the songs remain to be the original version instead of the updated ones. For example, in Lana Del Rey's album "Born To Die", songs like "Born To Die" "Video Games" "Blue Jeans" "Dark Paradise" all don't carry the "Mastered For iTunes" logo after my attempt.
3) Before I turned on iTunes Match, all albums carry the option "Show Complete Album" (I rarely purchase the entire album, usually I just pick songs to buy). But after I re-downloaded the entire library, that option is missing. All I see is this.
I've been upsetting with these problems these days. It would be really helpful if any of you guys have some solutions. Thank you.

When I went to restore my phone, I may have found the cause of these problems. I never deleted all of my original synced songs before enabling iTunes Match.
When I just went to do the restore, I figured I'd delete all of my songs, then disable iTunes Match. After deleting about 3.5 GB of music and disabling iTunes Match, I ran the sync to backup my iPhone. It said there was still 2.2 GB of music. I checked my phone just in case and there was 2.2 GB there, probably the original synced songs that I never removed.
Anyway, I'm doing the restore now just in case and will respond tomorrow with how everything is working.

Several issues with WRT54G

I just purchased a WRT54G to replace a damaged BEFW11S4. It’s version is v8.00.0, Jan. 16, 2007. The router is located in an upstairs bedroom. Downstairs is the Wireless Adapter WUSB11, Version 1.07. The connectivity between the two is fine. Here are the issues I am having.
Issue 1.
WEB encryption does not work. I setup the WRT54G for WEB, set the Passphrase and save the settings. I setup the WUSB11 with the same Passphrase and reset everything. The Wireless connection is establish but I do not obtain an IP address from the router. I have tried this several times with the PC and the Router next to me for easy configuration. Does anyone have any insight on what I might be doing wrong? Understand that when I had my BEFW11S4 the WEB worked great.
Issue 2.
I attempted to do the Install Wizard that came with the WRT54G, why, I don’t know. It got to a point in which I needed to enter IP addresses. Since my PC uses Dynamic IP, I canceled the Wizard. Ever since doing this, my PC is taking a long time to boot. Once booted, the WUSB11 is not being started. I get a 169.x.x.x IP address. I have added the IPAutoconfigurationEnable in the Registry but that did not change anything, except I do not get the 169.x.x.x address anymore.
It seems that something was loaded during the Wizard that was not removed on the Cancel. I’ve tried turning off my Virus program and my Firewall. Nothing changed. So there seems to be a process running that is looking for other IP connections. I recall having this problem before, but I don’t remember what I did to turn it off.
Again, if anyone might have any insight on what might be happening, I would appreciate it.
PC is running WinXP Home with SP2. WRT54Gv8, WUSB11v1.07.Message Edited by Brian_D on 06-01-200707:52 PM

Thanks...
System Restore fixed everything. I still don't know why I was having issues. But, a restore allowed me to get the WUSB11 back on line and WEB is also working.
My symptom for issue 2 was the PC booted with icons of programs starting appearing in the icon tray, but the virus program had a red x indicating it was disabled. About two minutes later x went away and the WUSB11 icon appeared in the tray. Only then could I open the Network Properties.
All this was too strange, but a simple restore back to a day or two before I purchased the WRT54G brought every thing back to normal. Now the PC runs as it should and my internet connection is available about 30 sec from boot up.
Thanks again for your comments.

Strange burning issue on Satellite A100

Hi!
I just stumbled on a curious problem. When I burned a DVD with Nero, it worked fine. The 2nd one worked but after playing the movie for about 38 minutes the movie just stops playing and the light on the DVD burner lights up consciously. I've already tried reburning the movie and burned another one but both stop playing after about 38 minutes (burned them with another computer and burner: the movies worked).
But then I notice a lot of errors in the windows log:
Damaged block in device \Device\CdRom0.
And another thing I noticed: the DVDs were burned at 6x, not the 8x speed the burner of this laptop supports.
Does this mean the DVD burner is broken?
With regards,
Bart Grefte
Toshiba Satellite A100-638
Nero burning rom 6.6.0.3
Philips DVD+R 4,5GB 1-8 speed

Hi
In my pinion it usually caused by a scratched or damaged cd. Try to clean it and see if it helps. If it works fine with some disks then its not the drive.
Some drives dont accept every media. Many CDs and DVDs are not compatible and therefore the drive burns the files not properly on the CD or DVD.
You could check different medias for the similar problems.
One little tip: In the user manual you should find a list of compatible CD and DVD. I think you should try to burn files or movies on one of the mentioned medias. Possibly it will work.

Several issues with iTunes syncing

Okay so I have an iPhone 4s 32GB iOS 6.1.2. an recently purchased a new windows 8 laptop that has iTunes 11 on it. I find several issues and have not been able to resolve so hopefully someone will have some suggestions.
1. iCloud will not back up contacts
2. iTunes will only show 11 of my 200+ purchased songs
3. iTunes sync over wifi shows my old laptop (which I removed before syncing with new computer) but will not show the new laptop.
4. After I purchased about 5 new songs and a few apps I attempted to sync with iTunes on the new laptop and while all my songs and apps from my last sync are there I cannot get the new items to sync back to iTunes no matter what I do.
I have turned off iCloud and backed up to iTunes via USB but still nothing is working. I have seen lots of other forum posts here and all over the web but none of the problems or solutions seem to fit my situation exactly. I am hesitant to reset the phone because I dont want to loose my contacts or the new content I have purchased. Any help would be awesome.

UPDATE. I did a reset and it did remove the old computer from my Wifi Sync screen but now my personal hotspot option is gone, I cannot connect to wifi at all and I still cannot get the phone to sync to iTunes.

Several Issues with iTunes, please assist.

Good AFternoon Folks.
I would appreciate any feedback or assistacne regarding iTunes and some very frustrating errors I have encounterd. I am running 7.5 iTunes on Windows Vista 64bit, Quad Core. This is my issues I have noticed and HATE:
1. iTunes no longer burns CDs. The green check marks show up, but no data is rippe. Burning doesn't work either.
2. iTunes in Album Art view, album art sometimes just disappers and doesn't come back. I have to got to CD Universe and copy the ablum art since iTunes doens't have the art. Frustrating.
3. iTunes has deleted several albums and songs. Its funny, the information is listed in the library, but when you click on it it says "I can't find it, show me/search, blah". I have lost at lease 9 albums/100 songs. Now I have to go and get my CDs out of a box in the atic to add them back. Man, I knew I should have boacked up the library.
4. iTunes in Album Art coverflow sometimes out of no were adds another picture of an album. So if I have one album (Dark Side) sometimes next to it is another album of Dark Side, just when you click on the second album art it goes back to the first. Makes things messy.
Anyways, these have been my issues with iTunes and I tell ya, if I can't figure out some of the more frustrating issues, I am going to change my software. But what syncs with an iPod Classic? Media Monkey? Thanks folks.

UPDATE. I did a reset and it did remove the old computer from my Wifi Sync screen but now my personal hotspot option is gone, I cannot connect to wifi at all and I still cannot get the phone to sync to iTunes.

Several issues with iPod touch. please help!

Ok. So i have several issues going on with my iPod touch. i got it for Christmas in 2010, i have recently updated it. after the update these issues have happened.
1. Screen won't rotate. Photos won't rotate. The screen won't rotate for horizontal keyboard use. Even for some apps that you have to rotate the screen, it just wont rotate. i have tried everything! i have read other discussions about this issue and they said there is a lock with an arrow around it in the top right corner, in my ipod there is not.
2. After i updated my iPod i noticed about 20 of my songs went missing! they are no where to be found on my iPod AND my iTunes! I purchased all of those 20 songs and am kind of mad they randomly disappeared. i have looked in every place a song could be and they are not there.
3. I have recently downloaded some apps and wheni went to try them, they would almost load and then crash and go back to the home screen. a bunch of my apps do that now. i have tried restarting my iPod and i have tried to open the apps like a million times and everytime they crash and goes to the home screen of my iPod. they are all free apps. some of the apps are: Impossible Test: summer, angry birds, angry birds: rio, angry birds: seasons. some of them i have been able to play a couple times, then they randomly stared crashing.
someone please help me with these problems! thank you!

For #1:
- Have you restored the iPod from backup?
- Have your restored the iPod to factoery defaults/new iPod?
If restoring from backup does not solve a problem then your likely have a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
For #2:
If you are in the USA and using the latest iTunes then you can redownload music via the iCloud beta. See:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Otherwise you can contact iTunes and they MAY allow a redownload. See:
Apple - Support - iTunes
For #3:
Try:
iOS: Troubleshooting applications purchased from the App Store

HT1918 My name is Paul Augsburger I have had several issues with my account and they are now fixed with one exception, I have two Apple ID accounts, and I would like to combine them. Please contact me at pra1949 (at) me (dot) com for further information.

Please contact me at pra1949 (at) me (dot) com for any further contact I don not monitor the suelefriends (at) gmail (dot) com email.
I have had several iisues with my Apple ID accounts and spent many hours at the APPLE store in Richmond Va. getting them fixed. The technician was wonderful, patient and very knowlegeable, however he was not able to complete the task and said I needed to contact Apple support for the final step. During the process of fixing things I ended up with two APPLE ID accounts. my main accout is suelefriends (at) gmail (dot) com and the second account is "pra1949 (at) me (dot) com" I have most of my apps tied to the main account with only a few to the pra1949 account. I also have $25 worth of credit on the pra1949 account. Because of the two accounts it still makes updating apps very confusing and very cumbersome. I would like to have the two accounts merged so I end up with one account with all the money and APPS tied to it, that way I only need one password to update. I hope this is possible.
Paul Augsburger
<E-mails Edited by Host>

These are user-to-user forums, you are not talking to Apple here and they don't monitor these forums - I've asked the hosts to remove yout account ids from your post.
In terms of combining accounts it's not currently possible to do so, nor to copy/transfer content from account to another.

Several issues with 2.4

There are a few issues I'm having with the 2.4 update. First, I just imported a bunch of shots. Now, on my second monitor, I'm in Loupe mode. The preview is pixelated. When I zoom up the image on the main monitor, it's just fine. This was not LR's behavior with 2.3 - the image looked the same when zoomed to 1:1 on both monitors. What's up with this?
Second, why hasn't Grid mode on 2nd monitor been fixed? I choose a dozen images in Grid mode on second monitor and add a keyword only to have that keyword applied to one image. This has been a bug/feature ever since LR started to support dual monitors. When, if ever, will this very annoying issue get fixed?
Third, after I edit an image in a external editor and then return to LR Grid mode, LR *insists* on changing my sort order. No matter what I do to keep sort order as "File Name," it keeps changing it to "Capture Time" or "Added Order." This has to stop. How?
Thanks.
Antonio

dpick2 wrote:
With 2.4, I am now having issues with keywords and captions only being applied to one photo even though many are selected. This is on my Dell Laptop running Xp.
This was not the case with 2.3.
Check that Library/Menu/Metadata/Show Metadata Only for Target Photo is NOT checked! Also that you are in Griid mode and selected multiples in the Grid.
Don

Re: Windows Vitual PC with Satellite A100-906

Hi,
can I use Windows Virtual PC on my laptop Satellite A100-906? My CPU support virtualization but I cant install Windows Virtual PC.
In BIOS I havent setting for virtualization enable.
Thanks

Hi
As far as I know the notebook uses the CORE2 DUO T5600(1.83GHZ) CPU.
According to the Intel page the VT is supported by this CPU:
Check this:
http://ark.intel.com/Product.aspx?id=27254&processor=T5600&spec-codes=SL9SG,SL9SP,SL9U3,SL9U7,SLA4E
Therefore it should be possible to use the Intel Virtualization Technology.
Update the BIOS and check if there is a option which could enable / disable the VT.
Greets

Several issues with Flash Player 10

This has been a problem for the last few month and I haven't been able to figgure out how exactly to fix it.
Half of the content I try to view online, simply wont work. Livestreams will remain at their loading display, YouTube works fine until I put it in to fullscreen, at which point the message "Press ESC to exit Fullscreen" will remain on the video, not fading. I've had several other problems with videos just refusing to load at all, I'll press play but that's all that'll happen. No buffer, nothing.
Anyone have any idea what's going on?

Hi again, Do you have adblock enabled in the FF(Firefox) extensions or add ons? If so Disable it until the Flash Player issues are resolved please.
Using FF, look for the plug-in SWF and make sure it is version 10.0.45.2(latest version of Flash Player) and that it is enabled.
What Anti-Virus program do you use and does it have a Firewall? The version number of the A/V would be helpful also.
If the A/V does not have a Firewall do you use any Firewall other than the Windows Firewall?
Do you have Flash Player installed in IE8 also?
Thanks,
eidnolb

Several issues with Satellite A100-569

Similar Messages

Maybe you are looking for