Several operation in one machine

Dear All,
my clile requirement is they have one machine they produce several things for example there is mixing machine where they mix chocolate, nuts, biscuits, etc many things in one machine with different capacity how can i map this scenario in sap.
kindly help me in this regard i will be very obliged.
thanks in advance
irfan

Dear,
You need to assign the same work center (Machine) in routing of the material  chocolate, nuts, biscuits and define there operion time accordingly. So you can carry out the several operation in one machine .
Hope clear to you.
Regards,
R.Brahmankar

Similar Messages

  • I have one folder on an XSAN that one machine can not make changes to. Whenever I try to duplicate or copy a file in this folder I get 'The operation can't be completed because an unexpected error occurred (error code -50).'?

    I have one folder on an XSAN that one machine can not make changes to. Whenever I try to duplicate or copy a file in this folder I get 'The operation can’t be completed because an unexpected error occurred (error code -50).'
    The permissions are fine, and I have trashed the finder plist and reset the NVRAM.
    Anyone have a answer?
    Thanks

    Tips I received so far (thanks to A-Mac via Twitter http://www.a-mac.nl and Remco Kalf http://www.remcokalf.nl/)
    - make sure you have at least 10% of your harddisk in free space (I had only 5%).
    - do a PRAM-reset (http://support.apple.com/kb/ht1379)
    - perform a hardware test (http://support.apple.com/kb/HT1509)
    - make a complete backup (with for example Carbone Clone Copier, see http://www.bombich.com/)
    - after complete backup: use diskwarrior (boot from Diskwarrior DVD, first perform diagnostics, then perform "Rebuild" which rebuilds your file directory).
    So far I only cleared up some space on my HD, and already the problem occurs less.
    Still, I will go through the other tips too.
    (will post progress)

  • 10.6.8 introduces several problem with mail, on one machine doesn't start on another it can't be seen from Safari, is that normal?

    I don't what's going on with 10.6.8
    Mail is suffering several problems.
    first of all, I made all the standard routines... permissions, etc.
    1) on one machine it starts, the dock icon is bouncing endless, and even forcing the index rebuilt, doesn't help.
    2) on another machine, mail is not recognized by Safari, it is not there it says (My fear is that is Safari the problem? Strange)...
    Do you have any other issue with Mail?

    I have reinstalled the combo update, last night... The Mail app works ok on one mac, but is isolated, so no other app can send to Mail.app any email content.
    Here you have the snapshots.
    and this is the info.
    I don't know what to do more... Shall I fill a bug report?

  • How to handle sessions with two severs on one machine?

    All,
    I am having a problem with session cookies being overwritten when I host two apps on one machine running WebLogic 8.1 The apps are http://myserver:7300/app1 and http://myserver:7400/app2, and each runs in its own server.
    Users will often access both apps at once, in two browser windows. If the windows are different threads in the same process, the sessions collide. For Internet Explorer, this isn't usually a problem since clicking on the shortcut multiple times launches different processes by default. Some browsers (Firefox, etc.) won't let you have two windows under different processes. Attempts to launch a second window 'detect' the existing process and appear to spawn a new thread. When this happens there appears to be no way for the users to use both apps at once.
    I know this is happening because of the way session cookies are stored in the browser process' memory. The session cookies appear to me to be 'keyed' by the host name or ip address of the server. Does anyone know of a setting in WebLogic so that this 'key' includes the port or context root? Is this even something which can be controlled on the server side?
    Thanks for any help,
    Brian

    Not quite sure what your intent is, but if you want to avoid a clash how
    about giving each application a different default session cookie name.

  • Can I use aperture library on more than one machine

    My situation is thus:
    I have a Macbook Pro on which my Aperture Library resides, in wherever Aperture decided to put it when I bought the software.
    I now have a iMac, which obviously will be better than the Macbook for photo editing.
    But I want to be able to take my Aperture Library with me when I take the Macbook out and about, and if necesary still edit on the Macbook.
    Is there any way to share the Aperture Library, so that I can edit on the iMac, but leave the library on the Macbook, and then edit on the Macbook if I wish.
    I am the only user, and will only be using Aperture on one machine at any one time.
    I have searched archives but not managed to find the answer.

    Is it possible to simply share the directory that contains the necessary file(s).
    If your Library is in the location that aperture picks by default, then it will be in your "Pictures" folder - look for a file with a name like "Aperture Library. aplibrary".
    What you will need to share depends on your import strategy for the master images. If you use managed masters, and all your master images reside inside the Aperture library, then you simply need to make this library file accessible  or copy it to an external disk.
    If on the other hand your masters are referenced, then I would recommend to consolidate them into the library before you share the library and then share the consolidated library.
    If you will share your library over the network or just by moving it to an external device is really up to you, but you might consider  the following pros and cons:
    - If you want to profit from the faster CPU on your iMac, then you should keep the library on the fastes volume that is available, and a network volume might be much slower than a directly connected volume.
    - if the network fails during a critical operation your library might get corrupted, if it resides on a network volume - there have been quite a few problems reported in this forum.
    That is why I suggested to use your Macbook as directly mounted external volume, that leaves the library in its place on the Macbook Pro - no need to copy - and you have a very quick and stable connection,  but the decision is yours to make. You will have to be comfortable with the workflow you choose.
    HTH
    Léonie

  • I have a desktop PC and a Macbook Pro.  Can I install my CC programs on more than one machine/OS at the same time?

    I'm looking to start using Adobe CC but I use more than one machine in my daily life - a Win8.1 PC and a Mac OSX laptop - can anyone tell me definitively whether I can install the desktop applications for CC on both and sync all my online files to whichever machine I happen to be using at the time?

    Cloud License allows 2 activations http://www.adobe.com/legal/licenses-terms.html
    -Install on a 2nd computer http://forums.adobe.com/thread/1452292?tstart=0
    -Windows or Mac does not matter... 2 on the same operating system, or 1 on each

  • How to transfer DATA from one machine to another using  DBlink

    I want to transfer data from one machine to another both having oracle 8.0.5 with AIX operating system using DB link. CAn any one help me in this task

    Step one - Create and test SQLNet connections between the databases.
    Step two - Create at least on database like from one database to the other:
    CREATE DATABASE LINK linkname
    CONNECT TO user identified by password
    USING 'tnsnamesentry';
    Step three - use the dblink linkname in dml statements eg:
    insert into emp@linkname
    (select * from emp);

  • Photoshop CS5 keeps crashing on one machine in our lab

    Photoshop CS5 keeps crashing on one machine in our lab.
    There are no message as to why its crashing, it just tells us and offers to shut it down.
    What logs would I be looking at -= What are they called and where are they?
    We're running Photoshop CS5 with all patches as part of the master suite.
    The PC is running Win 7 with SP1 and all patches.
    Thanks
    Shel

    Click Start and type event log into the search box.  When View Event Logs comes up, click it.
    Navigate to Windows Logs - Application.  Look for red error messages corresponding to times when Photoshop crashes.  Look specifically for Faulting Module indications.
    Good general advice is to go to the web site of the maker of the video card in that machine and download/install their latest update for the specific hardware and operating system.
    -Noel

  • I have deactivated XPro on one machine and need to activate on this one

    I have deactivated XPro on one machine and need to activate on this one

    And "this one" refers to what? You need to explain better and provide the necessary technical information liek operating system and so on.
    Mylenium

  • How to directly wire in more than one machine

    Hello all,
    I am probably going to buy this router. Right now I have one machine right near the cable modem so it can be directly wired in. My laptop and Imac can hook up wirelessly. I see that there is one LAN port for a machine to be directly wired in.
    What if I want to wire up more than one machine directly to the Airport Extreme router with actual ethernet cable (for better reliability). There is only one LAN side port. Do I just get a simple ethernet switch and then plug the machines into it? Is that reliable. If so which switch.
    Thanks.
    -Josh

    Joshua, depending on what kind of Modem your Internet Service Provder has furnished you with you simply run the Ethernet cable from the port you hook a machine to, direct to the WAN port on the Airport EXtreme Base. The one with the circle of dots. The LAN port on the AEBS can be used for hardwired connection, it's the one with 2 arrows pointing away from one and other.
    Or you can run an ethernet cable from this same port on the AEBS to a HUB and wire in several, or you can use a multiport switch...
    There are a multitude of ways to hook this up and almost all come with a diagram and explain in a step by step... This should do it for you...Good Luck..Don

  • Query takes long time from one machine but 1 sec from  machine

    I got a update query which is like a application patch which takes 1 sec from one machine.I need to apply that on the other machine where application is installed
    Both applications are same and connecting to the same DB server.The query ran from second machine takes so long time ....
    but i can update other thing from the secon machine.
    IS there anything to do with page size ,line size
    Urgent Please

    HI
    Everything is same except from the diff machine.
    Any client version issue because the script us so wide like 240 chars
    PLAN_TABLE_OUTPUT
    | Id | Operation | Name | Rows | Bytes | Cost |
    | 0 | UPDATE STATEMENT | | | | |
    | 1 | UPDATE | IDI_INTERFACE_MST | | | |
    | 2 | INDEX UNIQUE SCAN | PK_IDI_INTMST | | | |
    Note: rule based optimization, PLAN_TABLE' is old version
    10 rows selected.
    Message was edited by:
    Maran.E

  • How to authorise more than one machine (1 tablet Android and one PC running Windows XP Pro) with the same Adobe ID ?

    How to authorise more than one machine (1 tablet Android and one PC running Windows XP Pro) with the same Adobe ID ?

    Cloud License allows 2 activations http://www.adobe.com/legal/licenses-terms.html
    -Install on a 2nd computer http://forums.adobe.com/thread/1452292?tstart=0
    -Windows or Mac does not matter... 2 on the same operating system, or 1 on each

  • Why might a VI break when building an executable on one machine versus another?

    I have a large test application that is designed to work on several machines. In the process of testing I go to each machine and open the project on the machine I am testing. When I am satisfied the project is behaving as expected  I build the executable and test that it is working as expected. This is where my problem occurs.
    More Background: This software was originally meant to run one test at a time and was upgraded to run multiple tests at the same time(sharing resources and the like). To accomplish this, another VI was written that opened instances of the original VI (clone). I don't know if this is common, however this has been in use for a while and is known to work even after the migration to the network(probably not the problem).
    My issue is that I can build the software on one machine and it will work on another machine, yet when I try to build the same exact project from the other machine it will no longer open the instance of the original VI. I probed the error wire and it indicates that the VI must be broken. So I open the VI and it has no errors.
    I have no idea how to diagnose this any further. Anyone have any ideas?
    -Nate
    Solved!
    Go to Solution.

    Try mass compiling the entire project hierarchy prior to making a build. Also, if you are dynamically launching VI's, you must put them in the "Always Include" section of a Build Spec.
    Do either of these things help?
    a.lia-user-name-link[href="/t5/user/viewprofilepage/user-id/88938"] {color: black;} a.lia-user-name-link[href="/t5/user/viewprofilepage/user-id/88938"]:after {content: '';} .jrd-sig {height: 80px; overflow: visible;} .jrd-sig-deploy {float:left; opacity:0.2;} .jrd-sig-img {float:right; opacity:0.2;} .jrd-sig-img:hover {opacity:0.8;} .jrd-sig-deploy:hover {opacity:0.8;}

  • DMZs in one machine, debate

    Solaris Containers are ideal for server consolidation . I have thought about integrating DMZ services (www, mail, dns, db, catalog) into one physical machine. I'll provide a simple scenario.
    I have seen examples in various presentations about using zones in a "virtual" multi-tiered environment, where you separate these server roles into containers in one physical machine.
    Today, in a highly secured enterprise network archictecture, most of these services mostly run in different DMZs and are usually put into practice through use of switching and VLANs.
    So where am I going with this?
    Web-example:
    You have DMZ:s: WWW, APP, DB.
    - The WWW DMZ consist of multiple web servers/lets say they will be clustered zones.
    - The APP DMZ consist of 2 app.
    - The DB DMZ consist of several database servers.
    Now, this is only the production environment. There will be a similar setup for test and development.
    In total this gives a minimum of 18 zones in one machine, all need to have strict communcation rules through filtering.
    Here's the actual question:
    Would it make sense to separate these DMZs physically by adding 3 (3 dmz) physical NICs into that machine and physically connect these DMZ-NICS to a switch, configured to be on separate VLANs?
    Is it even possible to do this technically? Is it even sane to have these services running in the same physical machine? I bet some security folks would consider this insane. Can IP filter running in a global zone filter traffic between zones? If not, then my solution could work, sending the traffic out and back in through an external firewall.
    I wish to have a debate whether this is a good solution for DMZ consolidation of services.
    Thank you.

    OK, NAT seems to be the solution for now. I will look into that.
    I did a bit of research about this and found this paper:
    http://www.sun.com/datacenter/consolidation/solaris10_whitepaper.pdf
    This is an extract from chapter 8 (by the way, great paper):
    "Traffic between zones hits the loopback before it hits the higher layers of the IP stack where IPsec resides. IPsec can be used between zones if traffic is forced to go out onto the wire via the routing table. Firewalls such as IP Filter can not filter traffic between different zones, such as between the zone and the global zone because this traffic is looped back within IP. IP Filtering is the same as IPsec, in terms of hitting the loopback between zones. One way to implement IP Filtering between zones is to put the zones in separate subnets with routers between them so that traffic is forced outside of the system. This introduces a slight trade-off in performance for higher security between applications running in different zones. If using firewalls, install them in the global zone and then configure specific rules for the zone itself. Packets sent from the zone always have the zones IP address as the source address, so this property can be used to filter traffic from the zone."
    I might have misunderstood it, or the above is incorrect.
    Next step is try to build this with any solution possible. I will post any success.

  • MDM 7.1 SP7, Install Several Instances in one database?

    Hello,
    we are investigating to install MDM 7.1 Sp7 with several instances to separate impact in different repositories, but with one database (oracle). Has someone done this kind of installations? Has it improved stability?
    Regards,
    Alexander Türk

    Hello,
    This clearly says, it adds a new, but nothing of multiple instances.
    For an MDM environment to work, we require three Servers, Master Data Server(MDS), Import Server(MDIS), Syndication Server(MDIS).
    MDIS and MDSS run in conjunction with MDS.
    This refers to the multiple instances, but in all it will an single installation across environment.
    You will have the basic Development, Quality and production, each will have a different installation.
    an extract from help.sap.com site
    Support for Installing and Running Multiple MDM Server Components on a Single Machine
    Starting from MDM 7.1 SP06, you can install and run multiple MDM server components on one physical machine.
    One advantage of installing multiple MDM server components on a single machine, as opposed to loading multiple MDM repositories on a single Master Data Server (MDS), is that parallel execution of imports/syndications to/from loaded MDM repositories is possible. Another advantage is that you can have two repositories for separate projects on two different MDM versions on the same machineu2014resulting in reduced TCO. (In previous releases you would be required to separate the repositories on two different MDM servers, and adhere to the recommendation that the Master Data Import Server (MDIS) and Master Data Syndicator Server (MDSS) be run on a separate machine from the Master Data Server (MDS)).
    Each Master Data Import Server (MDIS) and Master Data Syndicator Server (MDSS) must be configured to work with one particular MDS only.
    You can distribute the MDM server components according to the following hardware configuration options:
    ●      Multiple Master Data Servers on one machine with remote MDM Import/Syndication Servers on a second machine, and a DBMS on a third machine.
    ●      Multiple Master Data Servers and MDM Import/Syndication Servers on one machine with a remote DBMS on a separate machine.
    ●      Multiple Master Data Servers, MDM Import/Syndication Servers, and a DBMS all on one machine.
    Test results show that hardware sizing parameters are almost identical for all the aforementioned configuration options; therefore the configuring option you choose should be based solely on your preferred hardware setup.
    More information:
    ●      http://service.sap.com/installmdm71 ® MDM 7.1 Installation Guides for Windows and UNIX (see updated section: Maintaining Multiple MDM Servers on a Host)
    ●      http://service.sap.com/installmdm71 ® MDM 7.1 Sizing Guide (see new section: Configuration Options for MDM Server Components)
    Regards,
    Abhishek
    Edited by: Abhishek Biwal on Feb 21, 2012 3:30 PM
    Edited by: Abhishek Biwal on Feb 21, 2012 4:56 PM

Maybe you are looking for