Several photos in one frame

Hi! Simple question - I think. I'm attempting to insert several photos into one shape in InDesign CS4. I'm sure it's something really simple but I'm just not figuring it out. Please help!!
Thanks in advance!

Thanks! I've done it before and just went back and redid it again and this time it worked. I must have been doing something wrong. Thanks again!!

Similar Messages

Is there a template where I can cut and paste several photos into one?

I am looking for a template where I can cut and paste from several different photos and make one collage. Can you help me find thius within the Photoshop program ?

Have you tried googling "photoshop template photo montage"?
If you are looking for pre-installed montage templates maybe you were thinking of Photoshop Elements.

I want to put several images on one sheet. In other words, I want to open a blank document and move photos on to it. Is this possible with Elements, and if so, how do I do it?

I want to put several photos on one sheet. In other words, I want to open a blank document and move several photos on to it. Is it possible to do this? If so, how?
Thanks, Leslie

lesliew13734700 wrote:
OK, another question. I opened a new blank file and the picture I want to move is in the Photo Bin. That image is 2 in. X 3 in. But, when I move it onto the blank image, which is 8X10, it fills up the entire space. I can't figure out how to put it in the new image in the correct size relationship.
Open the picture file, go to Image>resize>image size. Read what the resolution is in px/in, write it down, do nothing else here at this time
Go to File>new>blank file, Enter the dimensions , resolution the same value that you wrote down in step #1, background color to suit, ok it.
Go back to the picture file, go to Select>all, go to Edit>copy to put it on the clipboard
Go back to the blank file, go to Edit>paste
Get the move tool out of the toolbox, position the picture, and resize with the corner handles of the bounding box, if necessary..
Note: For printing, the rule of thumb is that the resolution be in the 240-300px/in range, although I have had good results below this value. For web work, 72 px/in is ok.

How do you move photos from one library to another in iPhoto 9.4.3

I have half 2009 photos in one library and the other half in a different library. I'd like to move several photos to one of the libraries to make a photo book. How do I do this?

use iPhoto Library Manager - http://www.fatcatsoftware.com/iplm/ -
Otherwise you can move the image and selected metadate by exporting form one library and importing into th eother
FWIW it is almost always better to have a single iPhoto library with all of your photos in it
LN

Insert two photos on one slide in iMovie 11?

I'm fairly new to iMovie but have had experience with Powerpoint presentations.
I am doing a project that has a lot of picture elements inserted in it. Is there a way I can place two photos in one frame and have them transition onto it? To make this clearer...one photo say goes to the left in frame, says in the shot, then the next photo pans right and both can be viewed on the one slide??
~Thank you

While you can use Photos in iMovie... it does not excel at it. You would be better off with something like Photo to Movie then importing that as part of your video project. BUT even with that tool it really does not support have 2 or more pictures on the screen at one time.
http://www.lqgraphics.com/software/phototomovie.php
You could use a program like Photoshop and do it there and use those photos or use Final Cut are the (2) ways I can think of.
-- Dan
Keeper of TheUnofficialiMovieFAQ.com

Combining multi photos into one?

I have taken several shots of a rally car going through a corner with a wide angle and would like to show the different positions of the car in the corner in one photo. the max to combine is 4 into 1

To combine several photos into one you need a program that can do compositioning. Aperture does not really support graphics compositioning. You will need to use an extertal editor that can layer images and supports alpha channels and transparency, like the the free GIMP, Pixelmator, Graphic Converter, Photoshop, or Photoshop elements.
With these programs you would be able to extract the cars in the different photos as a mask, make the background trasparent and overlay these masks onto the first image. This will work, provided you kept the camera pointing into exactly the same direction while taking the four pictures. Otherwise you will have to do lens correction as well to make the images match.
Regards
Léonie

I opened my iPhoto library today which was stored on an external hard drive and several of my videos now will not play. The weird thing is that each file shows a duration of 1 second and when I open them it just shows one frame. What the

I opened my iPhoto library today which was stored on an external hard drive and several of my videos now will not play at all. The weird thing is that each file shows a duration of 1 second and when I open them it just shows one frame. What the !&%$#@ Where did my original video files go?

Sounds like a good plan, you can never be to safe and having a second External HD is safer than one.
The only thing that I would do different, is setup the 3T as my TimeMachine Backup and then erase and move my Photos, Videos and perhaps even iTunes Media to the 1T. That way you will have room to backup both the Internal Hard Drive and the 1T External Hard Drive to the 3T using TimeMachine.
Take your time, study and use the > Time Machine - Frequently Asked Questions if you get stuck or aren't sure how to make the move.
Also see > iPhoto: How to move the Library folder to a new location
iMovie ’08: Storing or moving your video library to an external hard disk
and > iTunes for Mac: Moving your iTunes Media folder

How to hold several photos in the "order print" function of iPhoto? I only get one at a time.

I cannot get more than one photo to appear in the "order prints" section of iPhoto at a time. How do I move several photos over to order prints?

What is your iPhoto verstion? Assuming you are having the latest version on your new mac, it should work like this:
Select all photos at once in the event or album.
With the photos selected, use the command "File > Order Prints" from the main menu bar.
What happens, when you try that?
Léonie

I used to give my photo's keywords. Most of the time I have several photo's for the same keyword and it was possible to select all those photo's and give them the keyword in one move. Since of few weeks I can't do that anymore and I find it very annoying.

I used to give my photo's keywords. Most of the time I have several photo's for the same keyword and it was possible to select all those photo's and give them the keyword in one move. Since of few weeks I can't do that anymore and it's very annoying. What can I do to get back to the former situation?

. Since of few weeks I can't do that anymore and it's very annoying. What can I do to get back to the former situation?
Check, if you have the "Primary Only" option enabled. Then keywords will only be applied to the "Primary Image":
See: Keywords or ratings are applied only to one of the selected images - why?
Uncheck the little square button with the "1".

I'm trying to order album and I'm getting this message:Your book seems to have frames on one or more pages that do not contain photos. You must either change the layout of those pages or place photos in those frames before you can proceed with this book.

I'm trying to order an album and I'm getting this message:
Your book seems to have frames on one or more pages that do not contain photos. You must either change the layout of those pages or place photos in those frames before you can proceed with this book.
As far as I can see I have placed pictures on all the pages. I admit that on some pages I could have placed 3 or 4 pictures but I chose to use ony one or two. Could that be the problem?

Yes -
Your book seems to have frames on one or more pages that do not contain photos. You must either change the layout of those pages or place photos in those frames before you can proceed with this book.
The error seems pretty clear - you must have a photo in evey photo frame in order to place your order - so you must either change the layout (if you only want one photo on a page then use a layout with one photo) or put photos in the spots you have not filled
LN

I have just downloaded Elements 11 & there is only one frame (basic) in collage, how do I get more?

I have just upgraded from Elements 7 to Elements 11 but find in the photo Collage there is only one frame, how do I get more, my old 7 had a good variety???

Hi Wobygong5,
I am afraid PSE11 has just one theme, ie. Basic.
However you can go to Expert mode, and then create a new image of the size you want, and then insert frames from the Graphics panel. You can insert as many frames as you want.
But Photo Collage will offer you just one theme.
-Rahul.

PRINTING more than one photo on one page but not at iPhoto's preset sizes

Ahhh! This is so frustrating!
I have several photos which have been downsized to 7.2 x 7.2 cms. I would like to print them all out on one page and eventually add them to a specific photoframe. By printing onto one page it saves expensive photopaper and the enviroment!
However, Im stuck with iPhotos preset sizes which are no good to me! Why is there not a custom size option? Or just an option to print out the photos as the size they genually are?
I would rather not guess the size and use 'N-UP' or 'Sampler'. I just want to print out several small phots onto one page.
Please help me.
Thanks.
Tc

Hi Tct,
I use Portraits and Prints for my printing templates. There are a lot included with the program and the Pro version you can make your own templates to use.
Portraits and Prints

In Photoshop Elements 11 attempting to blend two photos ( layering one on another) when I click on a brush, I get a smart brush which doesn't do what the instruction say it should do. Instead I can get the eraser to do what I need to do. Why the confusion

In Photoshop Elements 11 attempting to blend two photos (layering one on another) I click on brush and get a smart brush which doesn't do what the instructions say it will do. I can get the eraser to do what I want. Why the confusion???

I click on brush and get a smart brush which doesn't do what the instructions say it will do.
The Brush tool (Keyboard B) has several different brushes in the same slot. Right click on the brush icon and you will see them, or press B sequentially.
The Smart Brush tool (Keyboard F) has two items in the slot.
Since you did not provide reference to "the instructions", it is difficult to remedy the "confusion." that exists.
I suspect that the recipe calls for a mask, and painting with a black brush to mask out certain areas.
It would help if you post the instructions and what your goal is with more specificity.

Multiple screens in one frame

Hi all,
I'd like to know how to be able to display multiple screens within one frame. Depending on the choice made on the first screen, the second screen should be either "View Default" or "Modify Default." The modifying will involve a number of other screens.
One idea is to group by Panel and control panels. Any better idea?
Regards,
Omer

Do you mean multiple displays in one frame? If so, you have several options. With JTabbedPane you could dynamically add new views to the frame, with the disadvantage of only being able to see one at a time. JSplitPane allows you to nest various views within one frame, though has the disadvantage of having extremely complex display logic when several split panes are displayed at the same time, and of displaying all displayed panes simultaneously.
Perhaps the best possibility is to use JDesktopPane, within which you can insert as many JInternalFrames as you want.

Loading a sound file from the library to play it in one frame

I am new to actionscript. I have a flash file with several frames. In each frame I need to play a sound file.
I've added all the sounds to the library and done all the necessary steps to export for actionscript.
Here's my code to play the sound in one frame.
var sound1:Sound = new Cal10101();
sound1.play();
This works great to play the sound. I am using buttons to move to the next frame. When I click the button to move to the next frame, I need the sound from frame 1 to stop and a new sound which would be Cal10102 to start playing.
How do I stop the sound from frame 1 from playing when I go to the next frame?
Thanks,
Steve

what you should do is use:
var sound1:Sound = new Cal10101();
var sound1SC:SoundChannel = sound1.play();
and before you goto the next frame execute:
sound1SC.stop();
// but you'll probably find it easier to use:
SoundMixer.stopAll();
before going to the next frame

Several photos in one frame

Similar Messages

Maybe you are looking for