Several problems, possibly due to updates.[SOLVED]

My touchpad just stopped working.
My flash drive needs to be plugged in at boot to mount.
My desktop has failed to load the background a couple times.
I updated the system mid afternoon.
I have fiddled with rc.conf to try to fix wireless, but I didn't change anything that should affect this.
Last edited by Raccoon1400 (2008-04-26 22:53:00)

Restarting hal, dbus does not help.  I'm pretty sure I had the flash drive working within the last week. I noticed today, after it stopped working, that system>preferences>removable drives and media no longer has the tab that lets me choose options about mounting and browsing flash drives.
bash-3.2# dmesg
Linux version 2.6.24-ARCH (root@artin) (gcc version 4.3.0 (GCC) ) #1 SMP PREEMPT Sun Mar 30 10:50:22 CEST 2008
Command line: root=/dev/sda7 ro
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
BIOS-e820: 0000000000100000 - 000000007fed3400 (usable)
BIOS-e820: 000000007fed3400 - 0000000080000000 (reserved)
BIOS-e820: 00000000f0000000 - 00000000f4007000 (reserved)
BIOS-e820: 00000000f4008000 - 00000000f400c000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
Entering add_active_range(0, 0, 159) 0 entries of 256 used
Entering add_active_range(0, 256, 523987) 1 entries of 256 used
end_pfn_map = 1048576
DMI 2.4 present.
ACPI: RSDP 000FC1D0, 0014 (r0 DELL )
ACPI: RSDT 7FED39CD, 0040 (r1 DELL M07 27D70205 ASL 61)
ACPI: FACP 7FED4800, 0074 (r1 DELL M07 27D70205 ASL 61)
ACPI: DSDT 7FED5400, 4766 (r1 INT430 SYSFexxx 1001 INTL 20050624)
ACPI: FACS 7FEE3C00, 0040
ACPI: HPET 7FED4F00, 0038 (r1 DELL M07 1 ASL 61)
ACPI: APIC 7FED5000, 0068 (r1 DELL M07 27D70205 ASL 47)
ACPI: MCFG 7FED4FC0, 003E (r16 DELL M07 27D70205 ASL 61)
ACPI: SLIC 7FED509C, 0176 (r1 DELL M07 27D70205 ASL 61)
ACPI: BOOT 7FED4BC0, 0028 (r1 DELL M07 27D70205 ASL 61)
ACPI: SSDT 7FED3A0D, 04DC (r1 PmRef CpuPm 3000 INTL 20050624)
Entering add_active_range(0, 0, 159) 0 entries of 256 used
Entering add_active_range(0, 256, 523987) 1 entries of 256 used
No mptable found.
Zone PFN ranges:
DMA 0 -> 4096
DMA32 4096 -> 1048576
Normal 1048576 -> 1048576
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0 -> 159
0: 256 -> 523987
On node 0 totalpages: 523890
DMA zone: 56 pages used for memmap
DMA zone: 1352 pages reserved
DMA zone: 2591 pages, LIFO batch:0
DMA32 zone: 7107 pages used for memmap
DMA32 zone: 512784 pages, LIFO batch:31
Normal zone: 0 pages used for memmap
Movable zone: 0 pages used for memmap
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 (Bootup-CPU)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to flat
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
swsusp: Registered nosave memory region: 00000000000a0000 - 0000000000100000
Allocating PCI resources starting at 88000000 (gap: 80000000:70000000)
SMP: Allowing 2 CPUs, 0 hotplug CPUs
PERCPU: Allocating 33200 bytes of per cpu data
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 515375
Kernel command line: root=/dev/sda7 ro
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
hpet clockevent registered
TSC calibrated against HPET
Marking TSC unstable due to TSCs unsynchronized
time.c: Detected 1596.001 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Checking aperture...
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 2057040k/2095948k available (2958k kernel code, 38052k reserved, 1092k data, 248k init)
SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
Calibrating delay using timer specific routine.. 3196.96 BogoMIPS (lpj=5324746)
Security Framework initialized
Capability LSM initialized
Mount-cache hash table entries: 256
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
using mwait in idle threads.
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU0: Thermal monitoring enabled (TM2)
SMP alternatives: switching to UP code
Early unpacking initramfs... done
ACPI: Core revision 20070126
ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
Using local APIC timer interrupts.
APIC timer calibration result 8312495
Detected 8.312 MHz APIC timer.
SMP alternatives: switching to SMP code
Booting processor 1/2 APIC 0x1
Initializing CPU#1
Calibrating delay using timer specific routine.. 3193.03 BogoMIPS (lpj=5320050)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU1: Thermal monitoring enabled (TM2)
Intel(R) Core(TM)2 CPU T5200 @ 1.60GHz stepping 06
Brought up 2 CPUs
net_namespace: 120 bytes
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG at f0000000 - f3ffffff
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
PCI quirk: region 1080-10bf claimed by ICH6 GPIO
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 11) *4
ACPI: PCI Interrupt Link [LNKB] (IRQs *5 7)
ACPI: PCI Interrupt Link [LNKC] (IRQs *9 10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 11) *3
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnpacpi: exceeded the max number of mem resources: 12
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
PCI-GART: No AMD northbridge found.
ACPI: RTC can wake from S4
Time: hpet clocksource has been installed.
Switched to high resolution mode on CPU 0
Switched to high resolution mode on CPU 1
system 00:00: iomem range 0x0-0x9fbff could not be reserved
system 00:00: iomem range 0x9fc00-0x9ffff could not be reserved
system 00:00: iomem range 0xc0000-0xcffff has been reserved
system 00:00: iomem range 0xe0000-0xfffff has been reserved
system 00:00: iomem range 0x100000-0x7fed33ff could not be reserved
system 00:00: iomem range 0x7fed3400-0x7fefffff could not be reserved
system 00:00: iomem range 0x7ff00000-0x7fffffff could not be reserved
system 00:00: iomem range 0xffb00000-0xffffffff could not be reserved
system 00:00: iomem range 0xfec00000-0xfec0ffff could not be reserved
system 00:00: iomem range 0xfee00000-0xfee0ffff could not be reserved
system 00:00: iomem range 0xfed20000-0xfed9ffff could not be reserved
system 00:00: iomem range 0xffa80000-0xffa83fff could not be reserved
system 00:02: ioport range 0x4d0-0x4d1 has been reserved
system 00:02: ioport range 0x1000-0x1005 has been reserved
system 00:02: ioport range 0x1008-0x100f has been reserved
system 00:03: ioport range 0xf400-0xf4fe has been reserved
system 00:03: ioport range 0x1006-0x1007 has been reserved
system 00:03: ioport range 0x100a-0x1059 could not be reserved
system 00:03: ioport range 0x1060-0x107f has been reserved
system 00:03: ioport range 0x1080-0x10bf has been reserved
system 00:03: ioport range 0x10c0-0x10df has been reserved
system 00:03: ioport range 0x1010-0x102f has been reserved
system 00:03: ioport range 0x809-0x809 has been reserved
system 00:08: ioport range 0xc80-0xcff could not be reserved
system 00:08: ioport range 0x910-0x91f has been reserved
system 00:08: ioport range 0x920-0x92f has been reserved
system 00:08: ioport range 0xcb0-0xcbf has been reserved
system 00:08: ioport range 0x930-0x97f has been reserved
system 00:0b: iomem range 0xfed00000-0xfed003ff has been reserved
PCI: Bridge: 0000:00:01.0
IO window: disabled.
MEM window: ed000000-efefffff
PREFETCH window: d0000000-dfffffff
PCI: Bridge: 0000:00:1c.0
IO window: disabled.
MEM window: ecf00000-ecffffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.3
IO window: e000-efff
MEM window: ecc00000-ecefffff
PREFETCH window: e0000000-e01fffff
PCI: Bridge: 0000:00:1e.0
IO window: disabled.
MEM window: ecb00000-ecbfffff
PREFETCH window: disabled.
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:01.0 to 64
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1c.3 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 723k freed
Simple Boot Flag at 0x79 set to 0x1
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Installing knfsd (copyright (C) 1996 [email protected]).
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:01:00.0
PCI: Setting latency timer of device 0000:00:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:01.0:pcie00]
Allocate Port Service[0000:00:01.0:pcie03]
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
Allocate Port Service[0000:00:1c.0:pcie03]
PCI: Setting latency timer of device 0000:00:1c.3 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.3:pcie00]
Allocate Port Service[0000:00:1c.3:pcie02]
Allocate Port Service[0000:00:1c.3:pcie03]
Linux agpgart interface v0.102
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input0
PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
Freeing unused kernel memory: 248k freed
libata version 3.00 loaded.
ACPI: PCI Interrupt 0000:00:1f.2[b] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ACPI: PCI interrupt for device 0000:00:1f.2 disabled
ata_piix 0000:00:1f.2: version 2.12
ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
ACPI: PCI Interrupt 0000:00:1f.2[b] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xbfa0 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xbfa8 irq 15
ata1.00: ATA-7: SAMSUNG HM160JI, AD100-12, max UDMA/100
ata1.00: 312581808 sectors, multi 8: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/100
ata2.00: ATAPI: Optiarc DVD+/-RW AD-5540A, 102C, max UDMA/33
ata2.00: configured for UDMA/33
scsi 0:0:0:0: Direct-Access ATA SAMSUNG HM160JI AD10 PQ: 0 ANSI: 5
scsi 1:0:0:0: CD-ROM Optiarc DVD+-RW AD-5540A 102C PQ: 0 ANSI: 5
CPU0: Temperature/speed normal
CPU1: Temperature/speed normal
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000bf80
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[b] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
Driver 'sd' needs updating - please use bus_type methods
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 21, io base 0x0000bf60
sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda:<6>usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
Driver 'sr' needs updating - please use bus_type methods
sda1 sda2 sda3 sda4 < sda5 sda6<6>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 22, io base 0x0000bf40
sda7 >
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
sd 0:0:0:0: [sda] Attached SCSI disk
sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.3: irq 23, io base 0x0000bf20
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 20, io mem 0xffa80000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 8 ports detected
usb 3-1: new full speed USB device using uhci_hcd and address 2
usb 3-1: configuration #1 chosen from 1 choice
usb 4-1: new low speed USB device using uhci_hcd and address 2
usb 4-1: configuration #1 chosen from 1 choice
usbcore: registered new interface driver hiddev
input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1d.3/usb4/4-1/4-1:1.0/input/input2
input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.3-1
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k
ACPI: PCI Interrupt 0000:0b:00.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:0b:00.0 to 64
ssb: Sonics Silicon Backplane found on PCI device 0000:0b:00.0
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
ssb: Sonics Silicon Backplane found on PCI device 0000:03:00.0
b44.c:v2.0
eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:19:b9:5e:58:c0
ndiswrapper version 1.52 loaded (smp=yes, preempt=yes)
usbcore: registered new interface driver ndiswrapper
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1b.0 to 64
ACPI: SSDT 7FED4134, 0244 (r1 PmRef Cpu0Ist 3000 INTL 20050624)
ACPI: SSDT 7FED3EE9, 01C6 (r1 PmRef Cpu0Cst 3001 INTL 20050624)
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: SSDT 7FED4378, 00C4 (r1 PmRef Cpu1Ist 3000 INTL 20050624)
ACPI: SSDT 7FED40AF, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624)
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU1] (supports 8 throttling states)
vboxdrv: Trying to deactivate the NMI watchdog permanently...
vboxdrv: Successfully done.
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 1.5.6 (interface 0x00050002).
ACPI: AC Adapter [AC] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
input: Lid Switch as /devices/virtual/input/input3
ACPI: Lid Switch [LID]
input: Power Button (CM) as /devices/virtual/input/input4
ACPI: Power Button (CM) [PBTN]
input: Sleep Button (CM) as /devices/virtual/input/input5
ACPI: Sleep Button (CM) [SBTN]
ACPI: Thermal Zone [THM] (54 C)
EXT3 FS on sda7, internal journal
Adding 2449872k swap on /dev/sda6. Priority:-1 extents:1 across:2449872k
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:01:00.0 to 64
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 169.12 Thu Feb 14 17:51:09 PST 2008
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is off for TX and off for RX.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
fuse init (API version 7.9)
usb 5-3: new high speed USB device using ehci_hcd and address 4
usb 5-3: configuration #1 chosen from 1 choice
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
usb 5-3: USB disconnect, address 4
eth0: no IPv6 routers present
Machine check events logged
CPU1: Temperature/speed normal
CPU0: Temperature/speed normal
CPU0: Temperature/speed normal
CPU1: Temperature/speed normal
Machine check events logged
CPU1: Temperature/speed normal
CPU0: Temperature/speed normal
atkbd.c: Unknown key pressed (translated set 2, code 0x87 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e007 <keycode>' to make it known.
Machine check events logged
CPU1: Temperature/speed normal
CPU0: Temperature/speed normal
Machine check events logged
CPU1: Temperature/speed normal
CPU0: Temperature/speed normal
Machine check events logged
CPU1: Temperature/speed normal
CPU0: Temperature/speed normal
Machine check events logged
CPU0: Temperature/speed normal
CPU1: Temperature/speed normal
Machine check events logged
usb 5-3: new high speed USB device using ehci_hcd and address 5
usb 5-3: configuration #1 chosen from 1 choice
usb 5-3: USB disconnect, address 5
usb 5-3: new high speed USB device using ehci_hcd and address 6
usb 5-3: configuration #1 chosen from 1 choice
bash-3.2# usbcore: registered new interface driver usbfs
bash: usbcore:: command not found
bash-3.2# usbcore: registered new interface driver hub
bash: usbcore:: command not found
bash-3.2# usbcore: registered new device driver usb
bash: usbcore:: command not found
bash-3.2# USB Universal Host Controller Interface driver v3.0
bash: USB: command not found
bash-3.2# ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20
bash: syntax error near unexpected token `('
bash-3.2# PCI: Setting latency timer of device 0000:00:1d.0 to 64
bash: PCI:: command not found
bash-3.2# uhci_hcd 0000:00:1d.0: UHCI Host Controller
bash: uhci_hcd: command not found
bash-3.2# uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
bash: uhci_hcd: command not found
bash-3.2# uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000bf80
bash: uhci_hcd: command not found
bash-3.2# usb usb1: configuration #1 chosen from 1 choice
bash: usb: command not found
bash-3.2# hub 1-0:1.0: USB hub found
bash: hub: command not found
bash-3.2# hub 1-0:1.0: 2 ports detected
bash: hub: command not found
bash-3.2# ACPI: PCI Interrupt 0000:00:1d.1[b] -> GSI 21 (level, low) -> IRQ 21
bash: syntax error near unexpected token `('
bash-3.2# PCI: Setting latency timer of device 0000:00:1d.1 to 64
bash: PCI:: command not found
bash-3.2# uhci_hcd 0000:00:1d.1: UHCI Host Controller
bash: uhci_hcd: command not found
bash-3.2# Driver 'sd' needs updating - please use bus_type methods
bash: Driver: command not found
bash-3.2# uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
bash: uhci_hcd: command not found
bash-3.2# uhci_hcd 0000:00:1d.1: irq 21, io base 0x0000bf60
bash: uhci_hcd: command not found
bash-3.2# sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
bash: syntax error near unexpected token `('
bash-3.2# sd 0:0:0:0: [sda] Write Protect is off
Last edited by Raccoon1400 (2008-04-26 00:51:06)

Similar Messages

  • Several Problems since installing five updates

    I installed five updates on 15/09/2014. (Updates: KB2995004, KB2993100, KB2990532, KB2979582, KB2975719)
    When I tried to print a document today I noticed that my default printer was missing. It appeared in the list of installed Printers (Control Panel) but not the dialog box. I restarted my computer to resolve this issue.
    I then noticed that my audio was not working. I clicked the Audio taskbar button and it started to detect and resolve problems however this was unsuccessful. I tried to manually start the Windows Audio service which gave me the following message: "Windows could not start the Windows Audio service on Local Computer. Error 0x800706cc: The endpoint is a duplicate."
    I had a feeling that it could have to do with the recent updates I've installed. I tried to open Control Panel but here's the strange part, it says 'Adjust your computer settings' like usual and then the Control Panel freezes and it becomes blank (all text below the navigation disappears). The only way to get rid of the Control Panel window is to restart Windows Explorer through Task Manager (In PC Settings, similar things happened). Then I did a Whole Computer scan with AVG and it found two threats (.exe files related to EID_pe_iscorrupted, not sure if this has any relation).
    I booted up safe mode and Control Panel worked fine, I repeated all the steps above with no success. I went to Windows Update and tried uninstalling the updates one at a time, when it restarted it said 'Failure configuring Windows Update Undoing changes'.
    Then I went to Computer > Properties (of the C drive) > Tools > Check. I checked for errors and it told me, 'Windows has found errors on this drive that need to be repaired. Close the dialog box and repair the drive'. Then I tried chkdsk /scan in Command Prompt. It told me to do an offlinescanandfix. I did this and restarted the computer. It was checking the disk and started up in safe mode with no sign of successful checking. I checked Event Viewer and there was nothing reported.
    I attempted System Restore in Safe Mode, fortunately there was a restore point created on 12/09/2014. Unfortunately when I tried to attempt this it only restarted again, telling me that it failed and gave me the error code: 0x80070570. I attempted this again after a clean boot and going into Properties of Block Level Engine Backup Service. It still gave me the same error code.
    I went back into the normal mode and attempted System Restore and Check drive. This time Windows said there were no errors with the drive and System Restore failed once again (same error code). Thankfully networking features are intact but Control Panel, Audio and System Restore are not.
    I am quite unsure if it's the recently installed updates or possibly a virus. 
    System Details:
    OS: Windows 8.1
    Manufacturer: HP
    Model: Pavillion 15-n270ea
    I've also posted this on Microsoft Community but I need to get help form other forums.

    Hey @TTYTOM ,
    Welcome to the HP Forums!
    I understand after some recent updates you're having issues with your notebook.
    Try these steps in safe mode to uninstall and block the update. It sounds like after removing updates your system is still trying to apply something recent.
    To do this follow these steps:
    1. Boot into safe mode: Windows Startup Settings (including safe mode)
    2. Press Windows Key + X.
    3. Click Programs and Features.
    4. Click View Installed Updates on the left hand side.
    5. Click on the Installed On heading to sort by date installed.
    6. Click on the update that was recently installed.
    7. Click Uninstall at the top.
    8. After you've uninstalled the updates test the startup.
    If it works, block the Windows updates that caused the issue:
    1. Press Windows Key + X.
    2. Click Control Panel
    3. Click System and Security.
    4. Click Windows Update.
    5. Click Check for updates to rescan for available updates.
    6. Click on # important updates are available. Where # is the number of available updates.
    7. Right click on the update and choose Hide update. If the update is not shown, click the Optional tab on the left.
    I would also suggest trying a system restore by booting into the recovery drive. Tap F11 on startup and you will be prompted to choose a region. Select US and click Troubleshoot. Click Advanced Options, and then choose the System Restore option. This should work better as Windows is not running during the process to block anything.
    Let me know if that works.
    Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    The Great Deku Tree
    I work on behalf of HP.

  • After update, several problems (battery, factory recovery, Message icon)

    After Froyo update, I found out several problems.
    1) Battery.
    It drains two times faster than before. My one does. My wife's one is worst (maybe 3-4 times faster and also the phone is hotter than mine).
    2) Factory Recovery option
    I could not find any factory recovery button from mine and wife's.
    3) "Message" icon
    My one has no "Message" icon. It has just three icons "Pone/Contacts/Applications" at the bottom of the screen.
    But my wife's has all four icons "Phone/Contacts/Message/Applications"
    I don't know how to correct these.

    It sounds like most of your issues can be found by doing a factory restore on the phone.  Settings>privacy>factory data reset. The icons are customizable.  Press icon to bring up all icons.  Touch and hold on the icon you want on the main screen. You can touch and hold on a blank spot on home screen to add a widget. 
    As for battery issues, the issue has been escalated to Samsung, and we are working with them to get a resolution as quickly as possible.
    Let us know if that helps out!

  • HT1338 After updating my mac to the new operating system I have had several problems.  Now my printer program is not working.

    After updating my mac to the new operating system I have had several problems.  Now my printer program is not working.
    Do you have any suggestions?

    Start by telling us what printer you hope to use.
    Look at the printer manufacturers site to see if they have a 10.9 print driver.
    Assuming you have tried to delete & re-add the printer it's possible that the model is no longer supported.
    You can also try the printing system reset…(I think 10.9 is the same as the Lion instructions).
    http://support.apple.com/kb/HT1341
    If the model is supported you should be able to add it & the driver will be downloaded.

  • Adobe Bridge CS6 is malfunctioning after the last update raw 8.0.199. Several problems.

    Anything known on this issue? Solutions? Even importing files from memory card is a problem.
    In import window images are not diplayed as images but all the same blue mini images.
    vertical files are changed into landscape positions and more. Mac version.
    cj de vries

    Op 12 apr. 2014, om 19:27 heeft Yammer <[email protected]> het volgende geschreven:
    Re: Adobe Bridge CS6 is malfunctioning after the last update raw 8.0.199. Several problems.
    created by Yammer in Bridge General Discussion - View the full discussion
    http://helpx.adobe.com/bridge/kb/acr-84-bridge-cs6-metadata.html
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6292450#6292450
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6292450#6292450
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6292450#6292450. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Bridge General Discussion at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.
    THNX Problem solved

  • HT4628 I am able to download updates and send and receive email so I know I have connection to my wireless router. However, when I click on Safari, I get the message "Safari quit unexpectedly." What is my problem and how do I solve?

    When I click on Safari, I get the message "Safari quit unexpectedly." I know I have access to my wireless net work because I just found and downloaded updates and can send and receive mail. What is my problem and hoe is it solved?

    As Outlook is not an Apple product, you will find more helpers familiar with Outlook here:
    Office for Mac forums

  • An error occurred when processing the spool request.  (Possibly due to memory problems)

    Hi SAP,
    My backgroud job is failing with log as shown below
    Job started
    Step 001 started (program ZMRS0065, variant SUS
    Step 002 started (program ZDRS0090, variant SUS
    Step 003 started (program ZFRS0305, variant SUS
    Step 004 started (program ZFRS0300, variant SUS
    Access error
    Job cancelled after system exception ERROR_MESSAGE
    An error occurred when processing the spool request.  (Possibly due to memory problems)
    Kindly help out in this issue
    Regards
    Mohammed

    Hello Mohammed,
    Have you seen any error in your SM21 system log and developer trace of spool work process
    during that time?
    The maximum size when create spool is 2GB.Pls also check if you are creating a spool
    larger than it.
    Best Regards
    Jie Bai

  • I have made many attempts to install the 11.1.4.62 iTunes update unsuccesfully! Error 6034, iTunes.exe has made an attempt to load the C runtime library incorrectly. I see that many people is having the same problem. How do I solve it...

    I have made many attempts to install the 11.1.4.62 iTunes update unsuccesfully! Error 6034, iTunes.exe has made an attempt to load the C runtime library incorrectly. I see that many people is having the same problem. How do I solve it...

    Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components; this won't affect its library, but that should be backed up anyway.
    (99115)

  • What does this statement mean: "There is a problem with your authentication, possibly due to inactivity. For your safety, you have been logged out and must sign in again to continue?"

    I am able to make it to the site for about 2 seconds and then I am quickly logged off and the statement, "There is a problem with your authentication, possibly due to inactivity. For your safety, you have been logged out and must sign in again to continue."
    I don't have a clue as to the problem but since this is impacting my participation in these classes and ultimately could have a negative impact on my grade, I am more than a little concerned!

    Have you allowed this site to set cookies?

  • [SOLVED]wlan0 up - Operation not possible due to RF-kill

    Hello everyone.
    I've encountered trouble trying to activate my wlan0 interface and I was wishing that someone here might be able to help me.
    $ip link
    1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default
    link/loopback
    2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT group default qlen 1000
    link/ether
    3: wlan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
    link/ether
    My attempt at trying to activate wlan0 renders the following;
    $sudo ip link set wlan0 up
    RTNETLINK answers: Operation not possible due to RF-kill
    Unblocking everything with RF-Kill does not seem to change much in particular:
    $rfkill list all
    0: hp-wifi: Wireless LAN
    Soft blocked: yes
    Hard blocked: no
    1: phy0: Wireless LAN
    Soft blocked: yes
    Hard blocked: yes
    $sudo rfkill unblock all
    $rfkill list all
    0: hp-wifi: Wireless LAN
    Soft blocked: yes
    Hard blocked: no
    1: phy0: Wireless LAN
    Soft blocked: no
    Hard blocked: yes
    Enabling/Disabling the wifi-button on my keyboard only changes the Hard Blocked-parameter of hp-wifi. The Soft block remains unchanged regardless of me trying to unblock all with rfkill.
    The following is the output of dmesg | grep phy0
    $ dmesg | grep phy0
    [ 7.460715] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5390, rev 0502 detected
    [ 7.465387] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 5390 detected
    [ 7.500363] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
    dmesg | grep hp-wifi renders nothing.
    Additional Information:
    $uname -r
    3.12.2-1-ARCH
    Entire output of lsmod
    Module Size Used by
    hid_generic 1161 0
    usbhid 40577 0
    hid 90678 2 hid_generic,usbhid
    arc4 2008 2
    rt2800pci 11055 0
    rt2800lib 74595 1 rt2800pci
    rt2x00pci 2664 1 rt2800pci
    rt2x00mmio 2945 1 rt2800pci
    rt2x00lib 37807 4 rt2x00pci,rt2800lib,rt2800pci,rt2x00mmio
    joydev 9671 0
    eeprom_93cx6 2193 1 rt2800pci
    mac80211 466554 3 rt2x00lib,rt2x00pci,rt2800lib
    cfg80211 412854 2 mac80211,rt2x00lib
    uvcvideo 72900 0
    kvm_amd 52575 0
    videobuf2_vmalloc 3280 1 uvcvideo
    videobuf2_memops 2343 1 videobuf2_vmalloc
    videobuf2_core 28027 1 uvcvideo
    kvm 389125 1 kvm_amd
    videodev 111140 2 uvcvideo,videobuf2_core
    hp_wmi 7627 0
    media 11751 2 uvcvideo,videodev
    radeon 1284675 6
    sparse_keymap 3154 1 hp_wmi
    crc_ccitt 1371 1 rt2800lib
    rfkill 15651 2 cfg80211,hp_wmi
    r8169 58399 0
    microcode 15216 0
    evdev 10989 13
    mii 4035 1 r8169
    pcspkr 2035 0
    k10temp 3058 0
    psmouse 85428 0
    ttm 63411 1 radeon
    serio_raw 5049 0
    rtsx_pci_ms 7266 0
    drm_kms_helper 36286 1 radeon
    memstick 7472 1 rtsx_pci_ms
    drm 238206 8 ttm,drm_kms_helper,radeon
    sp5100_tco 5824 0
    thermal 8532 0
    battery 6837 0
    wmi 8419 1 hp_wmi
    i2c_piix4 10592 0
    snd_hda_codec_realtek 40772 1
    i2c_algo_bit 5399 1 radeon
    i2c_core 24164 6 drm,i2c_piix4,drm_kms_helper,i2c_algo_bit,radeon,videodev
    ac 3332 0
    acpi_cpufreq 10779 0
    video 11228 0
    snd_hda_intel 36904 0
    shpchp 25465 0
    button 4677 0
    snd_hda_codec 149633 2 snd_hda_codec_realtek,snd_hda_intel
    snd_hwdep 6340 1 snd_hda_codec
    snd_pcm 77709 2 snd_hda_codec,snd_hda_intel
    snd_page_alloc 7242 2 snd_pcm,snd_hda_intel
    snd_timer 18726 1 snd_pcm
    snd 59173 6 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_pcm,snd_hda_codec,snd_hda_intel
    soundcore 5450 1 snd
    processor 24935 3 acpi_cpufreq
    ext4 474187 4
    crc16 1367 1 ext4
    mbcache 6082 1 ext4
    jbd2 83504 1 ext4
    sr_mod 14898 0
    cdrom 34848 1 sr_mod
    sd_mod 30789 6
    rtsx_pci_sdmmc 14332 0
    mmc_core 95691 1 rtsx_pci_sdmmc
    ahci 22896 5
    libahci 21401 1 ahci
    rtsx_pci 32049 2 rtsx_pci_ms,rtsx_pci_sdmmc
    libata 170792 2 ahci,libahci
    ehci_pci 4000 0
    ohci_pci 4072 0
    ohci_hcd 23937 1 ohci_pci
    ehci_hcd 59220 1 ehci_pci
    usbcore 180136 6 uvcvideo,ohci_hcd,ohci_pci,ehci_hcd,ehci_pci,usbhid
    scsi_mod 130669 3 libata,sd_mod,sr_mod
    usb_common 1656 1 usbcore
    Entire output of lspci
    00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 14h Processor Root Complex
    00:01.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Wrestler [Radeon HD 6320]
    00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode]
    00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
    00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
    00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller (rev 42)
    00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA) (rev 40)
    00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller (rev 40)
    00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI to PCI Bridge (rev 40)
    00:14.5 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI2 Controller
    00:15.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB700/SB800/SB900 PCI to PCI bridge (PCIE port 0)
    00:15.1 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB700/SB800/SB900 PCI to PCI bridge (PCIE port 1)
    00:15.3 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB900 PCI to PCI bridge (PCIE port 3)
    00:16.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
    00:16.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
    00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 0 (rev 43)
    00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 1
    00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 2
    00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 3
    00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 4
    00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 6
    00:18.6 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 5
    00:18.7 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 7
    02:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5209 PCI Express Card Reader (rev 01)
    06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 05)
    07:00.0 Network controller: Ralink corp. RT5390 Wireless 802.11n 1T/1R PCIe
    It is worth mentioning that this problem has remained persistent throughout multiple linux distributions that I've tried on my laptop. The Wifi works fine in Windows 7 but as soon as I switch to any linux distro it stops working.
    I intend to put your advice to good use so any help would be very appreciated.
    Last edited by FunkDojo (2013-12-05 13:02:45)

    As I can see you have two wireless interaces, when i see only phy0 with rfkill, it's maybe your hp-wifi that force to disable phy0 interace. I think if you blacklist the driver it might allow phy0 to be enabled.
    Please download and install lshw available in the community repo and enter in a terminal :
    $ lshw -c network
    Last edited by maxarsys (2013-12-05 06:26:05)

  • [SOLVED] Problem w/ lxdream after updating/reinstalling OS.

    Hi,
    Yesterday I've made update on OS and then I've got Kernel panic... So I've recovered data and reinstalled OS (it was the best option for me, because previous system was such a mess). After installing OS I've compiled by myself lxdream and after copying 'bios data' to ~/.lxdream it gaves me "Illegal instruction" ("Bledna instrukcja" in polish). So, I've tried compiling from the AUR and I've got this same result. Before update/reinstall everything was working ok. This is from 'gdb lxdream' and typing 'run':
    Starting program: /(path_to)/lxdream
    [Thread debugging using libthread_db enabled]
    [New Thread 0xb3357b70 (LWP 1745)]
    ALSA lib pcm.c:7236:(snd_pcm_recover) underrun occured
    Program received signal SIGILL, Illegal instruction.
    0x0809547f in gl_reset_state () at drivers/video_gl.c:36
    36 glOrtho( 0, video_width, video_height, 0, 0, 65535 );
    (gdb) _
    My system spec:
    AMD Athlon 2000+ (1.6GHZ)
    512MB RAM in one DDR module (Kingston)
    80GB HDD PATA (Segate)
    Nvidia GeForce FX 5500 AGP (w/ using nvidia-96xx)
    Creative SB16 listed by lspci as Ensoniq 5880B
    I'm using xorg-server 1.7.5.902-1 and nvidia-96xx/nvidia-96xx-utils.
    It's not bug in alsa, because on previous install I've got alsa underrun occured and everything was working ok. Also it have other optional audio drivers (alsa,esd,sdl,null). Even on 'null' it's not working.
    I don't know what a problem is with lxdream, because previously it was working ok with the same drivers and 3rd party applications/libraries.
    It looks that some package after update have broken compatibility. I need this emu, because it's needed for me for Homebrew Development.
    I'll test lxdream on second PC with similiar specs, that have ArchLinux slightly outdated.
    It's my first post and sorry for my English, I'm Polish.
    Thanks a lot.
    // it works okay on second (not mine) pc, it has xorg-server 1.7.5.901 and open source ati radeon drivers (called 'radeon'), I don't know if that helps, if I would know how to debug it...
    Update:
    It looks that it's ia gtk or gl/glx bug, because when I comment this line 'glOrtho( 0, video_width, video_height, 0, 0, 65535 );' it runs, but when I get cursor over GL display it will crash with:
    Program received signal SIGILL, Illegal instruction.
    on_video_window_mouse_motion (widget=0xadff940, event=0xae03c18,
    user_data=0xae94600) at gtkui/gtk_win.c:133
    133 int x = (int)event->x;
    So it's looks that it is a GL/GLX or GTK bug. On that PC gtk version is 2.18.7, mine is 2.20.0.
    Update:
    I think, that it is a GTK 2.20.0 related problem...
    Update:
    Marked with 'SOLVED' flag in the subject.
    Last edited by XionKH10 (2010-04-06 09:35:48)

    Here you go:
    mail:~ dude$ ls -l /var/clamav/
    total 14736
    -rw-r--r-- 1 clamav clamav 610351 Nov 30 03:44 daily.cvd
    -rw-rw---- 1 clamav clamav 2 Nov 29 21:44 freshclam.pid
    -rw-r--r-- 1 clamav clamav 6924820 Nov 3 16:31 main.cvd
    and when I do the following:
    mail:~ admin$ ls -l /var/amavis/
    ls: : Permission denied
    So I tried the same command as root:
    mail:~ dude$ ls -l /var/amavis/
    ls: : Permission denied
    mail:~ dude$ sudo ls -l /var/amavis/
    Password:
    total 24
    lrwxr-xr-x 1 root clamav 33 Aug 12 10:38 .spamassassin -> /private/var/clamav/.spamassassin
    drwxr-x--- 4 clamav clamav 136 Sep 11 13:05 amavis-20060911T130530-11951
    drwxr-x--- 4 clamav clamav 136 Sep 11 13:26 amavis-20060911T132643-12041
    drwxr-x--- 4 clamav clamav 136 Nov 30 11:46 amavis-20061130T114636-17606
    drwxr-x--- 4 clamav clamav 136 Nov 30 11:49 amavis-20061130T114901-17679
    -rw-r----- 1 clamav clamav 0 Apr 12 2006 amavisd.lock
    -rw-r----- 1 clamav clamav 3 Nov 29 21:44 amavisd.pid
    srwxr-x--- 1 clamav clamav 0 Nov 29 21:44 amavisd.sock
    -rw-r--r-- 1 clamav clamav 3 Mar 20 2005 whitelist_sender
    I see something odd with the symlink in the first row. Is this the problem? If so, then how would I fix it?

  • Severe problems with System Preferences after updating to OS 10.8

    After updating my MacBook Pro (2Ghz Intel Core i7) from MacOS 10.6.8 to 10.8 I have severe problems with accesing System Preferences.
    For each of the topics (XXX) listed below, I get the following message, when selectiong the topic:
    "To use the XXX preference pane, System preferences needs to quit and reopen"/OK/Cancel
    After quiting and reopening the same message appears again...
    Topics (XXX):
    Desktop & Screen saver
    Security & Privacy
    Notification
    iCloud
    Mail, Contacs & Calendars
    Date & Time
    Software Update
    Dictation & Speech
    Startup Disk
    After updating to Mac OS 10.8.1 the problem persist.... Any suggestions or fixes?
    Best Regards
    Carsten

    1. Open Disk Utility and repair permissions
    2. Open Finder, press Option key, select Go > Library, open Preferences folder and delete com.apple.systempreferences.plist
    3. Go to System Preferences > Users and Groups, create an user and check if the issue appears
    4. Backup the data and press Command and R keys in boot. Open Disk Utility, select the drive, erase it and install Mountain Lion. When Mountain Lion asks for the backup, only move your user files

  • I'm having problems with 7.1 update my flash "flashes" now when I receive txt's and notifications! And I'm also having problems with freezing and wifi problems! How do I solve this?

    I'm having problems with 7.1 update my flash "flashes" now when I receive txt's and notifications! And I'm also having problems with freezing and wifi problems! How do I solve this?

    Doh! Rectified flash!
    But when face timing 2 seconds after it connects wifi disconnects? Any thoughts

  • Error Message: Change of update mode not possible due to open V3 update

    Hi Gurus,
    I got error message when i change update mode (LBWE) from V3 to Direct or Queued delta method.
    Error Message: Change of update mode not possible due to open V3 update
    Long text: You are not allowed to change the update mode for application 11 from V3 to another method. This is because there are still V3 update entries for update module MCEX_UPDATE_11 that have not been processed yet.
    Pls anyone give solution for this.
    Thanks
    Muthu

    Hi Sreeni,
    i did check in all the below Tcode as you adviced.
    1. Clear all record at SM13, LBWQ / SMQ1, Setup tables, RSA7 for particular datsasource or application..
    2. For LBWQ provide date range and delete not required records.
    I did not get the 3rd point " Need to clear in CLINTS of R/3 system" of your reply.
    what does that mean?
    I checked all the above tcodes and got the same message as no queue or data exists".
    I went SBIW tcode and activated my data source and try to change the Update mode but still it is throwing error message as "Change of update is not possible due to open V3"
    Please help me out.
    It will be very helpful for me if you could share steps or docs regarding this issue.
    Thanks,
    Shailaja

  • [SOLVED] Several problems with PulseAudio under Xfce4

    So, yesterday I sat down to set up pulseaudio on my machine (I want to try and use it for my 'networked-audio system' of the future).
    I was aware of the fact that pulseaudio does have several problems. particularly with ALSA-compatibility, but I was ready to give it a shot anyway and hope for the best.
    Of course that did not happen...
    I installed everything (including packages for backward compatibility with ALSA) and while sound still works (what a relief), I have several problems now:
    1. Pulseaudio does NOT save it's volume levels  - Volume levels for Pulseaudio are gone after next reboot, I was trying to look into this, but found no workable solution.
    2. Strange behaviour of apps when changing volume - This is REALLY annoying.
    When I am in a music app for example (e.g. Banshee) and am trying to increase/decrease volume, the current sound (song) will 'mute' when I am moving the slider and only 'resume' after I release it.
    Any ideas are much appreciated,
    Thanks,
    SOLVED: It seems that all my alsa channels were automatically muted when pulseaudio was first enabled.
    Strange, Is this because pulseaudio wants you not to use alsa or something? :-)
    Last edited by MatejLach (2012-09-02 19:30:45)

    vacant wrote:
    I'm using just alsa now but when I used pulseaudio I used "pacmd" to set suitable volumes. Something like
    pacmd set-default-volume (and then volumes in the range 0-65000?)
    anyway, "pacmd info" will have the correct command.
    I was not aware of this, very useful - Thank you.
    Last edited by MatejLach (2012-09-02 19:31:53)

Maybe you are looking for

  • Looking for a Reminder App?

    Beginning to enjoy the Razr Maxx - bountyful features!  One thing I was hoping to find was a way to have the phone send a Tone or Vibrate when it has received a new Voicemail; or email for that matter. Coming from a Blackberry, there was a program ca

  • Syntax Error with EXPORT statement in ECC 6

    Hi All, I have one issue with EXPORT statement syntax. I have declared data like below: DATA: BEGIN OF mem_id,           mandt LIKE sy-mandt,           uname LIKE sy-uname,           modno LIKE sy-modno,         END OF mem_id. export the memory id   

  • Organization Problems.  Can no longer put songs in playlists.

    First "Why am I reposting my earlier question?" ANSWER: 1.  I had to post my question a second time because as you can see my first post isn't showing as a question anymore nor does it allow me to recheck the   "box" that turns my post into a  questi

  • How do I change the time format in the menu bar?

    I've gone to system preferences - language - date and time, and customized the time for 24 hour time with no colon between HH and MM.  The menu bar time display doesn't reflect this:-( There are some 5 year old posts about this not working, but nothi

  • Locks in CCM 2 publishing

    Hi All, I published a catalog in CCM 2 but I cancelled the job via SM37 and now I can no longer publish because it still has locks on the catalog I'm trying to publish... Does anyone know where/how I can remove these locks?? Thanks very much, Paula.