Several problems rendering

You may have seen this post of mine: http://forums.adobe.com/thread/1254005
Unfortunately, this isn't the only problem I've had and its starting to severely slow down my workflow when trying to export from premiere.
Maybe these could be solved if I could get the "Mercury Playback Engine GPU Acceleration" to work? I'm thinking maybe the computer doesn't have enough ram or something to do it all on software only.
When trying to export longer mp4s(by longer I mean more than 10 minutes or so), both AME and Premiere freeze, unable to get past a certain point. This requires me to export projects out in 2-3 different pieces, stitch them together in premiere and export it all again. One time, instead of freezing, the clips would have random segments where random frames would turn to different shades of green and magenta, skipping between the different layers of the timeline. and sometimes frames of black.
I had no problem with the kind of work I do on CS6 on a macbook mini but ever since we "upgraded" to a new imac with CC everything is a guessing game.
I'd appreciate any help anyone may have.

Also, I would add that it seems to be a problem when encoding in mp4s coming out of premiere because sometimes I just encode to mov and then convert that to mp4 just fine. Anyone?

Similar Messages

Adobe Bridge CS6 is malfunctioning after the last update raw 8.0.199. Several problems.

Anything known on this issue? Solutions? Even importing files from memory card is a problem.
In import window images are not diplayed as images but all the same blue mini images.
vertical files are changed into landscape positions and more. Mac version.
cj de vries

Op 12 apr. 2014, om 19:27 heeft Yammer <[email protected]> het volgende geschreven:
Re: Adobe Bridge CS6 is malfunctioning after the last update raw 8.0.199. Several problems.
created by Yammer in Bridge General Discussion - View the full discussion
http://helpx.adobe.com/bridge/kb/acr-84-bridge-cs6-metadata.html
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6292450#6292450
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6292450#6292450
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6292450#6292450. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Bridge General Discussion at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.
THNX Problem solved

QT plug-in several problems

Hi everyone,
i'm developing a website which use QT plug-in to display an interactive VR movie. This website is composed with a first page with link to a second page that is written with classic ASP and is divided into two frames (upper wich contains the QT and lower which is the target (named targetFrame) of the hotspots).
I control the QT-plg-in with javascript functions described here:
https://developer.apple.com/documentation/QuickTime/Conceptual/QTScriptingJavaScript/bQTScripting_JavaScri_Document/chapter_1000_section_6.html#//apple_re f/doc/uid/TP40001526-CH001-DontLinkElementID14
And i insert the QT OBJECT in my page with the javascript function suggested here:
https://developer.apple.com/documentation/QuickTime/Conceptual/QTScripting_HTML/ index.html
I have encountered several problems to realize this webpage and i ask your help:
1) in IE (6/7):
When the user open the second page, all is loaded perfectly, but if the second page were closed and reopened IE ALWAYS crash. I tried with Safari and Firefox but they works very fine.
2) in Firefox:
As i explained before, i control QT plug-in with javascript functions suggested by Apple, but Firefox don't recognize theese functions as valid functions and therefore not work.
3) QT 7.2:
To control the click of hotspot i use the object parameters like suggested by Apple,:
QT_WriteOBJECT('vr/vr1.mov','545', '340','','HOTSPOT1','mylink1.asp','TARGET1','targetFrame','HOTSPOT2','mylink2.a sp','TARGET2','targetFrame')
When i start to develope this website i used QT 6.5, and everything works fine, but when i have installed the QT 7.2, everytime i click on an hotspot it open the link in a new window instead of the target frame i choose.
As you can realize i cannot publish this website, beacause of this problems.
Please HELP ME!!!

Hi Kirk, thank you for your answer.
Unfortunately, i had to remove the Demo.
However, i know that the demo works fine with Safari.
The problems are with IE 6/7 or Firefox.
I have noticed a strange behavior of the Demo for the first problem.
I have converted all pages from asp to htm, and tried it in local.
It works very well and IE never crash.
I am driving crazy!

Since I upgrade my iphone 3gs to ios 5.1, I have several problems with network and wi-fi, any solution?

Since I upgrade my iphone 3gs to ios 5.1, I have several problems with network and wi-fi, any solution? (No jailbreak)
Most of the time the iphone cannot reach any network and when it can, there is no data transfer, I can only make calls and sms.

Skizofrenias wrote:
Since I upgrade my iphone 3gs to ios 5.1, I have several problems with network and wi-fi, any solution? (No jailbreak)
Most of the time the iphone cannot reach any network and when it can, there is no data transfer, I can only make calls and sms.
iOS: Troubleshooting Wi-Fi networks and connections
iOS: Wi-Fi or Bluetooth settings grayed out or dim

10.6.8 introduces several problem with mail, on one machine doesn't start on another it can't be seen from Safari, is that normal?

I don't what's going on with 10.6.8
Mail is suffering several problems.
first of all, I made all the standard routines... permissions, etc.
1) on one machine it starts, the dock icon is bouncing endless, and even forcing the index rebuilt, doesn't help.
2) on another machine, mail is not recognized by Safari, it is not there it says (My fear is that is Safari the problem? Strange)...
Do you have any other issue with Mail?

I have reinstalled the combo update, last night... The Mail app works ok on one mac, but is isolated, so no other app can send to Mail.app any email content.
Here you have the snapshots.
and this is the info.
I don't know what to do more... Shall I fill a bug report?

Severe problem with 'Drill to Related' using drill icon

Hi
I have a severe problem with 'Drill to Related' in Discoverer Plus (10.1.2.54.25) using the drill icon of a worksheet:
1. Though existing no items to drill to are shown in the context menu (or pop-up list), instead it says just 'Drill to Related...'
2. Clicking on menue item 'Drill to Related...' results in 50% processor load (permanent) and no further update of the browser window (IE 7.0.5730.11) containig Discoverer Plus. There is no recovery of that state within about 20 minutes.
This behaviour is both highly reproducible and annoying.
When using the drill dialog instead of the icon the expected items are shown and 'Drill to Related' works fine. Although that is a workaround I don't think it acceptable to tell the end-users to use it.
I searched metalink for a hint but couldn't find anything.
Can anyone help?
Franziska

Hi S
This seems to be a bug that was fixed earlier since we didn't experience it having applied cumulative patch 3 earlier.
Something might be said about your problem in Metalink
Doc ID: Note:422575.1
Subject: Drilling With Discoverer Viewer 10g (10.1.2) Using Internet Explorer 7 (IE7) Fails With Javascript Error
We still had to apply the patch for the bug I mentioned earlier in this thread in order to be able to see and select an item to drill to. Unfortunately the problem with the processor load up to 50% and nothing happening is still there.
By the way IE 7 is certified now according to the Oracle certification information.
Hope this helps
Franziska

Several problems continuous since first installing Firefox. Personal google search settings don't save; remember me options on web sites like Facebook aren't remembered; Youtube and Flixy videos don't play despite removing/reinstalling/upgrading Firefox s

Several problems continuous since first installing Firefox. Personal google search settings don't save; remember me options on web sites like Facebook aren't remembered; Youtube and Flixy videos don't play despite removing/reinstalling/upgrading Firefox several times; upgraded the latest flash plugin today, but no difference, symptoms are black play box with youtube and white box with Flixy. Disbale AV and antimalware makes no difference either.
== URL of affected sites ==
http://

I have a new problem with secondary web pages opening up without any action on my part other than simply moving the mouse pointer across the screen.

My mac Mini has problem rendering images and video

THE PROBLEM:
My mac mini has problem rendering JPEG image. There are strips on the images. Other images such as GIF, PNG, TIFF, and BMP are displayed nicely.
The images shown in the links below illustrate the problem:
http://www.flickr.com/photos/terencewong/71481156/
http://www.flickr.com/photos/terencewong/73360989/
(Please note that this image is grabbed from my faulty Mac Mini and saved into TIFF. For uploading purpose, I converted it into JPEG on ANOTHER computer.)
For movies, AVI can be playback without problem. But when it is converted to MPEG, it looks like an untunned TV channel.
FIXES TRIED:
I did erase and install 3 to 4 times using both the install disc and my Tiger Family Pack. All ended up with strips on the JPEG images and the generated MPEG movies.
I've also tried to flash the firmware to 113-xxxxx-124 using ATI's october 2005 universal ROM update, however, the ROM Revision shown in System Profiler is still 113-xxxxx-116 no matter how many time I reboot the system.
INVESTIGATION:
Yesterday, I did some research and got to know that JPEG and MPEG are using DCT (Discrete Cosine Transform) for decompression. And the ATI Radeon 9200 chip provide such a transform on hardware basis, which free the CPU from doing something else. Feel free to point out my inaccuracy.
HARDWARE SPECIFICATION:
I bought the Mac Mini in the last Februray.
The system Boot ROM version is: 4.8.9f1
Display card is ATI Radeon 9200
Chipset Model: ATY,RV280
Revision ID: 0x0001
ROM Revision: 113-xxxxx-116
A POSSIBLE CONCLUSION:
I suspect that it is this part of the chip (the DCT) that is faulty.
Anyone know how to fix this problem?
Many thanks!

Assuming that your display is tightly connected, thus the problem is not caused by something as simple as that, the fact that a full erase and install has not removed the problem would, I think, point to this being a hardware issue, and given that everyone's mini (with the possible exception of some of the latest ones) has the same video chipset as yours, and do not suffer the problem that you appear to, it seems very likely that your mini has a fault which is in need of repair.
If you have an Apple Store nearby, I would take it there to have it checked out - at the very least they should be able to replicate your problem using an in-store display, and if not, thusly suggest it's something external to the mini and concerning your display or something very unusual in the immediate environment of the mini. If you don't have an Apple Store in reach, I'd take the system to an Apple authorized service provider since at the present time it is under warranty.

My old version of outlook express has several problems, will these be imported into a new thunderbird account

My old version of Outlook Express has gained several problems. It is time to change, will these errors be imported into a new Thunderbird account. I'm hoping that all would be well based on the belief that the two programmes are totally different.

You're not saying what problems you have with OE, so how should anyone guess?
There is no such thing as a 'Thunderbird account'. You do have an account with your email provider. You can use OE or Thunderbird to access that account.
But Thunderbird is not your email provider.

Several Problems with Visual Editor 1.1

I have installed the latest version of visual editor and also the emf and gef version required,the problem comes when i try to create a new Vsual class after i choose the property of the class such as name and so on and clicked finish My visual editor is empty.....the palette for visual component doesn't appear.
The visual editor creates a little window and duplicates it evrey time i click in the visualEditor page......please help me...i don't know what i have to do.... i tried the impossible but visual editr still doesn't work!

Mmm yes it's true, I have a virus checker on my computer...
and I have tried it twice to download WLS6.1 and always the same problem....so
I'll try again.
As for the last point (quick deploy of ejbs without compiling the classes)- Has
anybody managed to do it? It really could be helpful is somebody, who managed
to deploy a bean like this (without compiling) could post it to me, so I can examine
it...
You can mail it to [email protected]
Thanks
Francesco
David Felts <[email protected]> wrote:
It sounds like there is a problem with your downloaded version of the
installer.
Perhaps your download was corrupted by a running virus checker - we've
seen that
before. If you have a virus checker active, flush your browser cache,
turn off the
virus checker and reboot. Attempt to download again and run the install
program.
You should be prompted for the password and JDK 1.3.1 should be installed
on your
system.
Francesco wrote:
Hi all,
I have downloaded WLS 6.1 (NT /2000 version) but
I found several problems with it.
1) During the installation I'm not asked anymore
a password for my domain (feature or bug?)
2) The installation doesn't install jdk1.3.1
as required by setEnv.cmd. I have arranged the problem
pointing to my elder jdk1.3.0 that comes with WLS 6.0 but I don't knowif it's
correct this behaviour.
3) I have read in the docs that it's possible to deploy
EJB in a very quick way, without even compiling the classes.
So I have tried to pack the basic stateless Trader example
like this:
META-INF\
ejb-jar.xml
weblogic-ejb-jar.xml
examples\
ejb\
basic\
statelessSession\
Trader.java
TraderBean.java
TraderHome.java
TradeResult.java
But then I get only a Stack-trace full of exceptions stating that
<3-set-01 13.58.26 GMT+02:00> <Error> <Management> <Error deployingapplication
\config\mydomain\applications\basic.jar: java.lang.reflect.UndeclaredThrowa
bleException>
Is anyone aware about how to solve this problems?
Thanks
Francesco

Having problems rendering

Hello everyone:
OK now I'm having problems rendering. I have about 6m:22sec of video that I need to render. But I get this Render Error:
Insufficient disk space. Free up space with the Render Manager and Retry?
There is no files in the Render Manager Section?
What do I do. The project is on a 1 TB Western Digital Ext Hard Drive with plenty of HD space.
Any help would be great.
This is not my day
Damon

The project is on a 1 TB Western Digital Ext Hard Drive with plenty of HD space.
Fine. But where are the Render files being written to and how much space is on that drive?
Look at your Scratch Disks setting to find out.

Here are some extremely severe problem of lumia

There are several severe problems have not solved by nokia. One of these important things mentioned by customers was "Data Sense". This is an important feature for all of the customers, to know how much data they used. In addition, there is a link talked about that
http://discussions.nokia.com/t5/Nokia-Lumia/How-can-i-get-Data-Sense-or-Nokia-counter-from-WP8-Store...
said the problem has been solved. However, there is no solution.
Some one just said it is depending on carrier and nokia take no responsibility for that... Why Nokia hold this attitude to your customer? Are there any solution you can give us? The store even has no similar software for that.
I don't want to mention there are so much functions are locked, and we have no choice to do it by ourselves. Could I change the system to other countries to solve those problems? or give us a schedule but NOT "later" or "at the end of year" how and when this company unlock those functions for their nokia follower

You think it's important to 99% of Windows Phone users but seeing how this issue is hardly ever brought up and generally if it does the same bunch pops in to comment it's more likely to be a single digit number if that.
Would data monitoring be useful? certainly, especially where unlimited or affordable large data plans are rare.
Is it a dealbreaker? hardly, at least not in general.
Do I think Nokia should provide the previously available tool for WP8? Yes they should
Click on the blue Star Icon below if my advice has helped you or press the 'Accept As Solution' link if I solved your problem..

After update, several problems (battery, factory recovery, Message icon)

After Froyo update, I found out several problems.
1) Battery.
It drains two times faster than before. My one does. My wife's one is worst (maybe 3-4 times faster and also the phone is hotter than mine).
2) Factory Recovery option
I could not find any factory recovery button from mine and wife's.
3) "Message" icon
My one has no "Message" icon. It has just three icons "Pone/Contacts/Applications" at the bottom of the screen.
But my wife's has all four icons "Phone/Contacts/Message/Applications"
I don't know how to correct these.

It sounds like most of your issues can be found by doing a factory restore on the phone. Settings>privacy>factory data reset. The icons are customizable. Press icon to bring up all icons. Touch and hold on the icon you want on the main screen. You can touch and hold on a blank spot on home screen to add a widget.
As for battery issues, the issue has been escalated to Samsung, and we are working with them to get a resolution as quickly as possible.
Let us know if that helps out!

Anyone experiencing severe problems with Aperture3 after loading Lion?

I am experiencing severe problems with my Aperture 3 programme since installing Lion OSX, in fact it is almost unusable after about 15 minutes operation. My computer is only used for photography and is otherwise unburden. I would appreciate any help at allplease.

Try the Aperture forum, and you might want to describe the issue in moe detail there to get help.
Regards
TD

Several problems under Arch

New to using Arch64 and having several problems.
Hal seems to be mounting a random 100mb partition from one of my windows XP NTFS drives.
Anything I download using firefox is corrupt, and does not appear under firefox's "downloads" section. - 2.0.0.6 (Any file downloaded is labeled a "plain text document" that is unreadable with 0 byte size)
My understanding is that Wine now offers a 64bit version, but this still requires multilib which arch is not, yet I've found no helpful guide to arrive at a multilib arch to use wine.
Does pacman not have a method for globally uninstalling no longer needed dependencies, or is this handled at the "pacman -Rd" level.

New problem is fglrx broke after a pacman -Syu (updated fglrx during it.)
# fglrxinfo
_X11TransSocketINETConnect() can't get address for localhost:6000: Name or service not known
Error: unable to open display :0
I was wrong on hal, after bringing the drive back i noticed the 100mb partition hal is mounting is "really" supposed to be my /boot partition. But when i boot up it uses the "boot" folder mounted on "/" named "boot" instead of "/dev/sdc1" which is supposed to be "/boot".
If I change it in fstab to mount /dev/sdc1 partition correctly as /boot, it boots from "/dev/sdc3"'s /boot instead, then loads /dev/sdc1 as "/boot" afterwards.
Any suggestions, it is hard to explain.

Several problems rendering

Similar Messages

Maybe you are looking for