Several Problems with the GeForce3 Ti200

I am having several problems with my GeForce3 Ti200 card. First, anytime I click on the MSI Clock or MSI Information tabs in the Display Properties Window, it gives me the following error message:
"Run a DLL as an App has encountered a problem and needs to close. We are sorry for the inconvenience."
Once I close that message, the tabs disappear until I reopen the Display Properties window again. I have updated the drivers to the most recent version and still the same problem.
Next....When the additional nVidia drivers load...ie NVidea WDM A/V Crossbar...etc... All load fine except the one titled nVidia WDM Video Capture (universal). Once again, I have downloaded the most recent drivers and none would help. Here is my system information:
798 Mhz AMD Athlon
512 MG memory
Windows XP Version 2002 SP1
Creative SP Live
NEC Multisunc 95
TDK CDRW Generic DVD
Hard Drive WD 60Gig
Any help would be great!!

I have finally succeeded in making my video capture work.
However, not without a few more headaches. My "Double Image - Half Height" capture was my own stupidity.... I had the captures set for 30 fps -- setting them to 29.97 fixed that.
BUT I found this out when I had the latest nVidia display drivers (53.03) paired with the latest nVidia WDM drivers (2.20). The glorious full-height, single-frame screen capture had a bright white strip across the video approximately 1/3 of the total height.
You have to understand that I've been Googling this problem for several days... The one thing I think I've found out is that _Nobody_, including MSI, nVidia (especially nVidia!), or anywhere else, has really solved the problems people are having with these WDM drivers.
So here are the reasons I found out there for a White Bar across the picture:
(1) Improper installation of drivers - this supposedly causes a problem with 720 X 480 captures only. I had the bar on 640 X 480 captures as well.
(2) nVidia has gotten into bed with Bill Gate$(Micro$oft), Jack Valenti(Hollywood) and others to "protect digital rights". Newer versions of the WDM drivers (since which version? Does anyone know?) PUT the white bar across the video on purpose if the video you are capturing is copyrighted. The thing is, I was capturing an 8mm home video!
So, you decide, reason 1 or reason 2... I decided to try for #2.
I uninstalled WDM 2.20, ran the DriverCleaner2, and installed WDM 1.08 drivers. Guess what? No white bar. Now I can capture with Wincoder, VirtualDub, or Director's Cut 6.5. This is with nVidia Display Drivers 53.03 and WDM drivers 1.08 installed. I'm now thinking of the folks at nVidia the same way I think of Bill G and Jack V; they are all a bunch of rich, greedy scumbags. It is OK with them if they sacrifice your home videos in the name of their wealth.

Similar Messages

Having several problems with the my new Galaxy S III

I just got the Galaxy S III and I'm having a few issues..
1. My email - It will sync and bring in new messages, but if I delete a message in a web browser, it won't show that I've done that in my phone.
2. Auto rotate in the photo gallery - I have the "Auto-rotate" box checked but when I'm in the photo galley, it doesn't matter how I turn the phone, everything stays horizontal.
3. Backup assistant - it has pulled a bunch of weird cartoon pictures and lots of friends facebook profile pictures onto the backup assistant. Is there any way to pick what gets backed up or will I have to just go in and manually delete all this stuff?
Thanks for the help!!

1. What email client do you use? I know a lot of them use a different server for web and mobile devices... Also can be how the app stores the cached info for messages you have read..... They don't really use a live refresh for the entire inbox..... Basically it stores them in the apps cache and that does not refresh.....
2. That is an odd one... I would try (hail mary) clearing the cache and data for the gallery....Settings> Application Manager> All programs> go down to gallery and clear data....... (this may change your wallpapers back to default.) If that doesn't work try to recalibrate the the gyroscope in the display settings.... Again a long shot but the only thing I can think of at the moment...
3. For this very reason I stopped using Backup Assistant because I was tired of it backing up all my Album Art and various cached photos and icons.... I now use dropbox to store just the photos I want to back up... There are various apps in the Play Store that make this a snap that allow you to set the folders and times of backup...

Y 70-70 screen : problems with the black and white colors

Hi all, I just bought a Lenovo Y70-70 and already encountered several problems with the screen :- I had to change the notebook twice because of clearer zones on the black and because of dead pixels- The model I have now still presents irregularities in the black : if the screen is black, I can still see a few clearer zones on it, especially (but not exclusively) on the edges- concerning the white, I am a bit disappointed too : this color present zones that are sometimes ok, sometimes more yellow. Even if it is subtle, I nevertheless particularily see this effect when reading or typing, due to an optical effect that amplifies the phenomenom when text is displayed which tires my eyes. I also see it on colors like beige or grey. As I use this computer to play but also to work, it is uncomfortable. What I would like to know is if these problems are inherent to the screen, or if it is a defect. What should I do ? Did other people encounter the same problems ? I didn't find any setting to improve it. I found that these problems may be link to these, reported on the Y50-70 :- https://forums.lenovo.com/t5/Lenovo-P-Y-and-Z-series/Y50-Yellow-Dark-Yellow-Screen-Calibration/td-p/1868613- http://www.amazon.com/gp/customer-reviews/RCQNONXIKJJ5D/ref=cm_cr_pr_viewpnt?ie=UTF8&ASIN=B00MCJQ6MI#RCQNONXIKJJ5D Othewise this notebook is OK, playing with it is a real pleasure. Thank you for your answer,S.

Installation of Mavericks is the culprit here. Lightroom versions 4.4 and earlier are not fully compatible with OS 10.9.x. There will be no more updates to Lightroom version 4.x so the only fix is to upgrade Lightroom to 5.0 or later or reinstall an older OS on Mac.

Y70-70 screen : problems with the black and white colors

Hi all, I just bought a Lenovo Y70-70 Touch and already encountered several problems with the screen :- I had to change the notebook twice because of clearer zones on the black and because of dead pixels- The model I have now still presents irregularities in the black : if the screen is black, I can still see a few clearer zones on it, especially (but not exclusively) on the edges- concerning the white, I am a bit disappointed too : this color present zones that are sometimes ok, sometimes more yellow. Even if it is subtle, I nevertheless particularily see this effect when reading or typing, due to an optical effect that amplifies the phenomenom when text is displayed which tires my eyes. I also see it on colors like beige or grey. As I use this computer to play but also to work, it is uncomfortable. What I would like to know is if these problems are inherent to the screen, or if it is a defect. What should I do ? Did other people encounter the same problems ? I didn't find any setting to improve it. I found that these problems may be linked to these, reported on the Y50-70, supposing the screens of both models are the same (which I don't know) :- https://forums.lenovo.com/t5/Lenovo-P-Y-and-Z-series/Y50-Yellow-Dark-Yellow-Screen-Calibration/td-p/1868613- http://www.amazon.com/gp/customer-reviews/RCQNONXIKJJ5D/ref=cm_cr_pr_viewpnt?ie=UTF8&ASIN=B00MCJQ6MI#RCQNONXIKJJ5D Othewise this notebook is OK, playing with it is a real pleasure. Thank you for your answer,S.

There can be several things that could effect your issue. If you are using a color calibration device, it may change your white balance. Check and verify that you really are using pure white when filling, a value of 255, 255, 255 thats red, green, and blue. Check and see what color mode you are in, are you in 8 bit, 16 or 32 bit. Are you in RGB, CMYK, or other color mode.
I am sure there are a few other things, that I haven't thought of at the moment that can effect your issue.
The next question is what do you mean by black and white? or should I say how did you make it that way. Was it already a black and white (grayscale)? or did you convert it in photoshop and if so how. The reason I ask is there are more than one way to convert a color image to black and white and how you do it will effect the final outcome.

I have a problem with the synchronisation of my iPhone and iPad with Outlook 2007 on my 64-bit Windows 7 PC. For several years, I have had no problems with the synchronisation by cord connection and iTunes between these programmes. However, a few months

I have a problem with the synchronisation of my iPhone and iPad with Outlook 2007 on my 64-bit Windows 7 PC. For several years,
I have had no problems with the synchronisation by cord connection and iTunes between these programmes. However, a few months ago I decided to use Mobile Me. However, there were problems with duplication of calendars and then “rogue events” – which could not be deleted – even if deleted on Outlook and on the iPhone (or both at the same time) – they would just reappear after the next synchronisation. All other synchronisation areas (eg Contacts, Notes etc) work fine.
I have looked for help through the Apple Support Community and tried many things. I have repaired my Outlook. I have repaired my .pst file in Windows. I have re-installed the latest version of iTunes on my PC. I have re-installed the firmware on my iPhone. I have tried many permutations on my iPhone. I have closed down all Mobile Me functions on the iPhone. I have spent upwards of 24 hours trying to solve this problem.
What am I left with? Outlook works seamlessly on my PC. My iPhone calendar now has no events from my calendar, but does not synchronise through iTunes. Nor does it send events initiated on the iPhone to the Outlook. I am at the point of abandoning iPhones and iPads altogether. I need to have a properly synchronising calendar on my phone. Do you have any suggestions?

In the control panel goto the "Lenovo - Power Manager" and click the battery tab, there is a maintenance button in there that will let you change the charging profile for your battery. (from memory, so exact wording may be off)
The lower the numbers you use there, the longer the battery *should* last. These batteries degrade faster at higher charge levels, however storing them at too low of levels is also not good for them... I've read that 40% is optimal, but just not realistic if you use your computer.
--- ThinkPad T61 / Win 7 / Core 2 / 4gb RAM / Nvidia / Still used daily --- ThinkPad Edge 15/ i5 / Win 7 / TrueCrypt / 8gb RAM / Hated it, died at 1 yr 1 mo old --- ThinkPad T510 / Win 7 / TrueCrypt / i5 / 8gb RAM / Nvidia / Current primary machine --- ThinkPad X220 / i7 / IPS / 4gb / TrueCrypt / My Road Machine

? I have a problem with the cloud app. i have downloaded it several times and have no problem. when it runs it then opens up but stays blank so i cant see my apps or download any HELP

? I have a problem with the cloud app. i have downloaded it several times and have no problem. when it runs it then opens up but stays blank so i cant see my apps or download any HELP

>opens up but stays blank
BLANK Cloud Screen http://forums.adobe.com/message/5484303 may help
-and step by step http://forums.adobe.com/thread/1440508?tstart=0
-and http://helpx.adobe.com/creative-cloud/kb/blank-white-screen-ccp.html

I cant install itnes 10.6.3 on my system(Dell xps 64-bit) , ive tried everything possible by downloading it several times but it keeps telling me 'there is a problem with the windows installer package. A program required 4 dis install to cmplete cant run

i cant install itnes 10.6.3 on my system(Dell xps 64-bit) , ive tried everything possible by downloading it several times but it keeps telling me 'there is a problem with the windows installer package. A program required 4 this install to complete cannott run. Please contact your service vendor?.. Please what can i do?

Try the following user tip:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

Is anyone having problems with the battery heating up and draining the power? Mine has been doing this for about 2 months now.

Is anyone having problems with the battery heating up and draining the power? Mine has been doing this for about 2 months now.

This is a major problem with Lollipop, but yo said it started 2 months ago. Several people have fixed problem by removing FaceBook And Face book messenger and then re loading the apps again. You might want to clear your cache before reloading. Not sure this is your problem, but worth a try. Good Luck

I reset my iPhone5 and I'm putting my ID and password in and it says there is a problem with the server when trying to restore all my information with iCloud backup. What do I do?

I was having several problems with my iPhone5, apps crashing everywhere, nothing working. My father who is very tech savvy told me we would have to restore the iPhone using the iCloud. So I went to settings, erased all my stuff and got the grey starting screen. I got up to the point where it says to enter your Apple ID and Password and I couldn't remember so I went on Apple.com and changed my info so I could remember it no matter what. I got the email saying that my info has been changed and accepted and all that but now when I put the information in its says that there is a problem connecitng to the server.
Help!

http://www.apple.com/support/itunes/contact/
In countries where the iTunes Store only sells apps, the accepted payment methods are Visa, MasterCard, and American Express. Other payment types such as gift cards, store credit, monthly allowances, ClickandBuy, and PayPal are not accepted. Depending on your App Store country, prices may be listed in your local currency, US Dollars, or Euros. http://support.apple.com/kb/HT5552

Problem with HP pavillion dv7 giving message (a problem with the internal fan enter = shutdown

HP Pavillion DV7 notebook PC
Windows 7 64
intel I5
6 gig memory
service pack 1
I am trying to identify a problem with my HP Pavillion dv7 laptop
Several months ago it started getting hot and showing messages about problems with the internal fan and battery. It would say enter = shutdown and shut off. I suspected a bad battery so I checked it without it just plugging it in with the power cable. It seemed to work better so I assumed that was the problem.
I ordered a new battery and it worked for a while. The problem came back and is getting worse. I can run it without the battery for a while but it gets got and shows the same message.
I read on here that flashing and updating the bios worked for some but the latest update gives me an error IHISI not support BIOS then Insyde flash not supported.
any help would be great this PC has a lot of info on it and I dont think it is a lost cause
thanks

Hi duddy, sorry to hear that you are having issues with your computer over heating. I have found a document that will assist you with Restoring the BIOS. http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c02693833&lc=en&product=5199538&tmp...
I have also found a document that will assist you with Troubleshooting and Overheating and Auto shutdown issue. http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c03904182&lc=en&product=5199538&tmp...
If you are still having issues, please let me know and I will be happy to offer more assistance..
Thank you.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

I am having a problem with the FireFox browser. I have attached two files that best describe the problem. I have labeled them A & B. A is the way it should lo

I am having a problem with the FireFox browser. I have attached two files that best describe the problem. I have labeled them A & B. A is the way it should look and B is what happens after I have I opened several tabs. I can get it back to normal if I click on VIEW than click on customize. When the customize window appears FireFox returns to its normal state. I than click on the done box and go back to what I have been doing. I tried resetting FireFox back to default settings, but that did not correct the problem.
This began happening about a month ago. Is there a way I can fix this problem? Thanks for your help.I don't know how to attach my 2 attachments that shows the problem I am having.
[email address removed to protect your privacy and security]
<! [email protected] -->

I found the images here: https://support.mozilla.org/en-US/questions/977542#answer-501598

There is a problem with the security certificate of the proxy server. Error code 18 and 38.

Hi All,
After several hours and a short night of sleep I'm out of ideas and hopefully someone here can help me trying to solve this one. First of all the situation:
Exchange 2013 on a remote location with a CA-certificate.
Outlook 2010 and 2013 on different locations, locally installed and on RDS.
When I open Outlook on my laptop all is fine, no errors, good sync, no problem. But when I open Outlook on our Remote Desktop Servers with Outlook 2013 I'm getting errors like "There is a problem with the security certificate of the proxy server. The
name on the security certificate is invalid or does not match the name of the site. Outlook is unable to connect to this server. (Error code 18)". Opening Outlook 2010 the message is the same, but the error code now is 38.
After this Outlook opens and is working, there's one more error though. After a while an security warning pops up with the message: "Information you exchange with this site cannot be viewed or changed by others. However, there is a problem with the
site's security certificate. * The security certificate was issued by a company you have not chosen to trust. View the certificate to determine whether you want to trust the certifying authority. * The security certificate is valid. * The name on the security
certificate is invalid or does not match the name of the site."
Strangest thing is, it is the certificate of my RDS! It isn't my valid en officially bought certificate from my mailserver. What's going on? I'm out of options, what I've tried so far (in random order):
- restarting mailserver and AD;
- restarting switches;
- restarting routers;
- restarting RDS, AD and all other servers;
- bypassed proxyserver for RDS;
- created a new profile;
- checked recently installed updates;
- checked certificate on mailserver;
- checked RDS on a different location, working fine.
Nothing helped, what can I do next? Please advice.
Regards.

Found a thread that solves half my problem (https://social.technet.microsoft.com/Forums/office/en-US/70d18244-889a-4d95-ac3f-e234672a82b2/there-is-a-problem-with-the-proxy-servers-security-certificate-error-when-starting-outlook?forum=exchangesvrclients).
The first message can be suppressed by adding this to the Exchange config:
set-outlookprovider -Identity EXCH -CertprincipalName msstd:webmail.domain.tld
set-outlookprovider -Identity EXPR -CertprincipalName msstd:webmail.domain.tld
Giving the command get-outlookprovider, gives me empty information regarding the certprinipalname. Filled
this and after recreating the profile or deleting the ost-file I still have the second alert with the local certificate of my RDS.
Not completely where I want to be, any help regarding the second alert is greatly appreciated!

I created one apple I'd when I started using the iPad. After some days, I had to create a new apple I'd as there was some problem with the first one. Now at some places still my old apple I'd is appearing. Pls adv how I change this to my new apple Id.

I created one apple I'd when I started using the iPad. After some days, I had to create a new apple id
as there was some problem with the first one. Now at some places still my old apple Id is appearing. Pls adv how I change this to my new apple Id.

Anything you downloaded with the first Apple Id will forever be tied to it, and will always require it to update.
The question here is, why did you think you needed to create a new Apple ID? What was the problem with the first one?
To get rid of th old one, you'll need to delete everything you downloaded with it, and then sign out of the ID in several places around the iPad.
Go to Settings->iTunes & App Stores->Apple ID->Sign out.
Repeat the process, for Facetime, Messages, Mail and any other App you need to sign out of.

Problem with the AF of my new 18-135mm EFS IS STM lens

Hello,
The lens came with the EOS Rebel T5i bundle.
The auto focus is working incorrectly, focusing closer than the detected area. This is happening when I use the viewfinder. When a picture is taken using the “direct view” (LCD display) it focus correctly.
I didn’t use the camera a lot since I bought it, now looking the first pictures I see that this problem is happening since I bought it.
I changed the zoom lens with another Canon camera and then my new Rebel T5i works fine and the same problem happens with the other camera, therefore I’m sure that the problem is in the lens and not in the camera body.
The out of focus is more noticeable when I'm taking pictures in 18mm position to an object farther than 2 meters but it is happening in any zoom position. It is clear when I compare the same picture taken with the viewfinder with one taken with the LCD Display.
I updated the body firmware and the problem continues.
Is it possible to update the lens firmaware? I couldn’t find them in the canon webpage.
I will go into an important trip next week, therefore I will not have time to send the camera to repair.
Any idea?
Thanks!

You may want to rent a lens for your trip and get this lens to service.
You'll want to be sure it really is a problem with the lens (it sounds like it is from your description). Test the lens against a "flat" target (such as a wall). You can hang something on the wall with high-contrast (newspaper works great) and put the camera on a tripod. The idea is that (a) the camera is definitely not moving, (b) the focus target is definitely not moving, and (c) the target is flat and there are no distracting objects in the field of view so it's not possible for the focus system to decide to lock focus on anything OTHER than your intended target.
Next... deliberately turn the focus ring to put the camera out of focus (so that the camera HAS to move the focus). This is mildly tricky with an STM lens since there's no mechanical link from the focus ring to the lens -- it's electronic. The lens only accepts focus input when focus is active (e.g. half-press the shutter button, etc. to wake it up.) I run focus all the way in and test several times, then run focus all the way out and test several times (that way it has to move focus in both directions.)
If the lens is consistently focusing closer, then it will need service.
Tim Campbell
5D II, 5D III, 60Da

HT1926 can't install quicktime or itunes on windows 7 get the error message There is a problem with the windows installer package. A program required for this install to complete could not be run

please help. Can't install quictime player or itunes on windows 7. Get the error message There is a problem with the windows installer package. A program required for this install to complete could not be run. Have followed all the steps suggested and still no luck.

thank you for trying to help. I do not have apple software update on my computer. I have tried to install several programs so i could install it but every installation will not finish and rolls back and says no changes were made to my computer so i can't install the update. I even tried to force install as administrator but nothing works. Any help would be greatly appreciated. I have windows 7 64 bit.

Several Problems with the GeForce3 Ti200

Similar Messages

Maybe you are looking for