Several test systems ?

Hi,
we have several Test systems (one is used for volume testing for example, another for training).
If I create a track transport connection from the development track to tracks for volume testing and training then the transports will be trigered only when I assemble the SC's.
Suppose I create the tracks after the SC has been assembled. How do I trigger the transports again into the other tracks if I dont want to reassemble the software components in the dev track ? Forwarding components would be nice but it seems to only be there after approval.
Thank you.

Hi,
I will correct myself. The sc's are transported after assembly <b>and approval</b>.
You can forward components manually once they've been approved.
See you

Similar Messages

Process Chain Triggered automatically when transported to test system

Hi All,
We modified several process chain and transported the process chain to Test system.
Few Process chain triggered automatically as the varient was set to immediate in development system.
Now we want to move the process chain to production. Do we need
1. new transport request with the variant to future date and discard the transport request which created issues
2. New transport request with the variant to future date and transport the new along with the old transport to production system
3. Change the start date in Test system and transport the same request to production
Kindly advice me on the action to be taken.

>
> Hi All,
>
> We modified several process chain and transported the process chain to Test system.
> Few Process chain triggered automatically as the varient was set to immediate in development system.
> Now we want to move the process chain to production. Do we need
>
> 1. new transport request with the variant to future date and discard the transport request which created issues
> 2. New transport request with the variant to future date and transport the new along with the old transport to production system
> 3. Change the start date in Test system and transport the same request to production
>
> Kindly advice me on the action to be taken.
Regarding 2: When the old transport is imported into production the start will be set to immediately and the process chain will execute. You should not use this option.
Regarding 3: Changing in Test system will not affect the content of the transport, it will still be the same as released from Dev.
We have avoided this annoying problem with process chains being executed when transports are imported by creating a "parent" process chain that simply triggers the process chain in question. This "parent" chain should not be transported. You then set the start option for the original process chain to "start by API/Event" then you can transport the original process chain whenever you want without any risk of the process chain being executed.
Regards,
Lars

Open and close posting periods on test system

Hello together,
to open and close posting periods is only allowed on the develepment und the production client, but not on the test client.
It is an customizing object, but the flag "current settings" is set, so you also can change the settings on the production system.
In the test system, it only can be changed by opening the system for customizing using SCC4 und change to "Changes without automatic recording".
Is there a way to allow open and close posting periods on the test system without opening the client for customizing?
Regards,
Michael

Hi Michael,
Please, refer to the note 356483. Proceed as following:
Call transaction SE54
Enter the Customizing object (view or table)
Select "Generated objects"
Choose "Create/change"
Select "no, or user, recording routine" in the bottom part of the screen
Save the change
The view in your case is V_T001B.
Regards,
Eli

How can I handle deploying multiple test systems on the same PC that have been developed using different versions of LabVIEW, TestStand, and/or Switch Executive?

The major issue here is that the test systems must be documented and validated before being released to the production floor. Given this if a test station has multiple test systems deployed on it that have been developed on various versions of LV, TS, and Switch exec how can I force the test system selected to use the correct versions of TS, LV, and Switch exec.? I understand that the solution would be to recomplie everything and bring them up to the latest version but that would then require re-validation according to the QA department. Any advice would be greatly appreciated.
It would be nice if theTS deployment was more like an LV executable... meaning when a LV executable is launched it always knows what LV runtime engine to use when there are multiple engines installed on a PC.

Hi,
Multiply versions of teststand can reside on the same system, but only one version can run at a time. They is a utility that has to be run to set the active version.
The SequenceFiles have a version number, and you will find an error will be generate if you try to Load the sequencefile in the wrong version of TestStand.
The labview VIs will only work providing the correct version of the RTE is also installed on your system, even a labview executabe requires the correct RTE to be installed, either as part of the executable installation or as a seperate installation, before the labview exe will work correctly.
I'm not fimilar with the Switch exec but I would expect that it will also require the correct lower level device drivers to be available for the version you are using.
Therefore, as you are indicating that some of your system are at a older version, its difficult to image how you could achive this, considering if you say you have different versions of the software(s). For a start, you may have the problem that newer code/ sequencefiles using additional functionatily not available in the older versions.
I would think your only solution would be to have different deployments covering the different versions you have, or at least bring all your test systems up to the same version of teststand.
Regards
Ray Farmer
Regards
Ray Farmer

Probelms while replicating Data Source and transport into test system

I find the following error messages whilre transporting into test system.
DataSource 0EC_PCA_1 does not exist in source system of version A.
Mapping between data source 0EC_PCA_1 and source system is inconsistent.
DataSource 0EC_PCA_1 does not exist in source system of version A.
Field AFABE will not be delivered from DataSource 0EC_PCA_1 in source system.
any ideas please..........
Enhanced the Extract structure and activated the data source in Source system
Replicate the Data source in BI and install the Infosource through BI Content activated and transport them to Test system.

Hi,
1.First transport the data source from R/3 dev to R/3 quality
2.Replicate the data source in BI Quality ( make sure you that in the data source tab, you are searching the data source below the appropriate source system ---otherwise you data source may not appear)
3.goto rsd1in BI development for activataing the info objects which you have added extra in the info source (z info objects )
activate these info objects and collect in another request
4.transport these info objects from BI dev to BI quality
5.transport entire data source to bw quality.
Thanks,
Tarun Brijwani.
Edited by: Tarun Brijwani on Apr 6, 2009 4:26 PM
Edited by: Tarun Brijwani on Apr 6, 2009 4:26 PM

How to setup a BW test system?

Hi
We are having R/3 and now we are planning to install BW. Now a few questions are coming to us like...
1. In what cases we need a test system? Can we bypass test system and have development and productive system only?
2. How to setup a test system? Should we reload data from R/3 test system or can it be sourced from BW Productive system (in order to get more historical data)?
3. Has anybody setup a test system and loaded data from BW Productive system before?
Any suggestions will be highly appreciated.
Regards,
Pundit

Hi Arjun,
It is depends on client, for eg:say if client follows Sixsigma processes, then give much importance on Quality. So in this scenario it becomes much clear to have Quality box, If for other clients who don't have much Quality processes in place. you can take up the Quality (test) in Development box itself.
And it also depends on data you want have test on. For some clients they move much of their historical data for testing purpose..
Also some clients mainatain all 3 boxes(Dev,QA & Prod.)in sink..so that it would be easy for any changes or whatsoever.
Hope this helps...
Best Regards,
DMK
*Assign points if it helps...

OSS note is not working in production but works correctly in test system .

hello friends ,
weh have implemented one OSS notes , which is working corectly in Test system , but not working in production .
Could you please let me know , what could be the reason ?
OSS note no 1064273-
Regards,
Manoj

Pls. check with Basis if the OSS note has been implemented properly and successfully.

For one Urgent Change during performing the Approval(chnging the status to 'To be Tested') system does not recognize any changes using the CTS WBS BOM in the development system. The transaction is therefore incorrect or the status was reset by the system.

For one Urgent Change while performing the one of the Approval before changing the status to 'To Be Tested'
We are getting below error.
The system does not recognize any changes using the CTS WBS BOM in the development system. The transaction is therefore incorrect or the status was reset by the system.
COuld anyone please help us to know, How it can be resolved?
We also have this below error.
System Response
If the PPF action is a condition check, the condition is initially considered as not met, and leads to another warning, an error message, or status reset, depending on the configuration.
If the PPF action is the execution of a task in the task list, and the exception is critical, there is another error message in the document.
Procedure
The condition cannot be met until the cause is removed. Analyze all messages in the transaction application log.
Procedure for System Administration
Analyze any other messages in the task list application log, and the entries for the object /TMWFLOW/CMSCV
Additional Information:
System cancel RFC destination SM_UK4CLNT005_TRUSTED, Call TR_READ_COMM:
No authorization to log on as a trusted system (Tr usted RC=0).
/TMWFLOW/TU_GET_REQUEST_REMOTE:E:/TMWFLOW/TRACK_N:107
For above error Table /TMWFLOW/REP_DATA_FLOWwas refreshed as well but still the same error.

If you are in Test System, you can use function module AA_AFABER_DELETE to totally delete the depreciation area (tcode SE37, specify chart of depreciation and depreciation area), After that recreate your depreciation area and run AFBN. But before you do that, have you created a retirement transaction type that limits the posting on your new depreciation area? If not create one.
Hope this helps.
Thanks!
Jhero

Strange problem in report Execution in test system

Hi,
As something strange going on my program in test system.
1) Executing the program in Development system using SE38->program name->F8. the program executes and display selection screen fraction of seconds.
issue:
When i am doing same process in TEST System(using SE38->program name->F8) the execution process is min 1 or 2 min , then i am gettign the Selection screen.
I have checked other programs in TEST System but it doesnu2019t happen to any other programs on TEST system.
Program functionality--
i am using 2 table and MARA and Z table, Using Selection screen i am extracting the data into output screen and excel download
Dispaly
1)if user select the Radio button output to screen in selection screen
Display data into screen using some color formatted
2)if user select the Radio button output to file in selection screen
I am using OLE Automation Controller to get the Output excel download some color formatted data
please let me know how to rsolve this type of isssue in Test system...
plz respond when you find the time.
Regards,
AS
Moderator Message: Urgency downgraded.
Edited by: kishan P on Apr 13, 2011 11:59 AM

Yes ..
INITIALIZATION. Event i have written code like free the objects ans clear Work Area and Refresh the Internal tables
And
*-to highlight the comments on selection-screen
LOOP AT SCREEN.
    IF SCREEN-GROUP1 = 'RM1'.
      SCREEN-INTENSIFIED = '1'.
      MODIFY SCREEN.
    ENDIF.
ENDLOOP.
Add entries to get the search help values
PERFORM SEARCHELP_REGION.
PERFORM SEARCHELP_COUNTRY.
At selection screen event i am getting the search help for the region and country
AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_REGN-LOW.
*Search help for Region
PERFORM SEARCHHELP_REGN_F4.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_CTRY-LOW.
*Search help for Country
   PERFORM SEARCHHELP_CTRY_F4.
using FM :*FM for F4 help for returning the value to be displayed
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
Please let me know is it couse problem in TEST System....
so how to resolve the issue...
Regards,
SR

Cannot find the Web Content repository in test system under KM Content

Hi Experts,
We have implemented Web Page Composer in our development landscape. I have created a web page with the required content in the development and now wish to transport this web page and its content to our test system.
However when I navigate to Content Administration -> KM Content, inside the root directory I am not able to find the Web Content repository within which all WPC content resides.
I want to know what configuration has to be done in the test system so that the Web Content repository becomes available within KM Content.
Thanks and Regards,
Saurabh

Hi,
I just want a confirmation on whether I will have to deploy the .SCA file for Web Page Composer in my test and production systems to be able to use the web pages I have created in the development environment.
Regards,
Saurabh

BSP pages in test system after transport have same URL as development

Hi. I have just transported some BSP's from our development into our test system and have encountered a problem.
The URL's of each page is the same as it was in the development system, so when we try and use the pages in the test system we get a "service can not be reached" error.
I am relatively new to BSPs and this is the first time I have transported them. I presumed the URL would update to reflect each server.
Have I missed a setting or something? I searched on SDN but could not find a similar post.
Thanks a lot for your help.
Regards,
Dave.

Hi,
check whether the service is active in transaction SICF
(it may become inactive, when there is patch applied, upgrade , etc)
then you will get one screen there then what you need to do is
without entering anything just click execute and expand the tree to
default_hots->sap->bc->bsp->sap-> under this node you should be able to see your BSP name . right click on it and click activate.
here The BSP Name is nothing but the BSP Application name. When you create a BSP applicaiton, a SICF service is created along with the BSP application. All the request that the user makes to this BSP application is processed by the service only with the help of this corresponding SICF service.
regards
Bhavana

How do CVI7.0 runtime engine and TestStand3.0 runtime engine work in a test system?

I developed code modules from CVI 7.0, and test sequence from TestStand 3.0. Now I want to deploy all to a test system. Should I create distribution kits for CVI and TestStand, and install to a target PC? Do each kit include the RTE? How do the runtime engine work in a system?

hp7550,
I saw your post earlier entitled "what is a run-time engine?". It looks like this post is addressing the same issue.
To answer your questions, it is not necessary to create a distribution kit for your CVI code modules. You can simply install the CVI Run-time Engine, which you can find if you go to www.ni.com and click on the Drivers and Updates link on the left-hand side.
Then you will need to deploy your TestStand system using Tools >> Deploy TestStand System in the Sequence Editor. That tool will go out and gather all the CVI code modules your sequence calls - unless you are calling a DLL or something dynamically inside of a code module; in which case, you need to add that dynamically called DLL (or code module) to your TestStand workspace.
To install the TestStand Run-time Engine, make sure the Install TestStand Engine option is checked on the Installer Options tab of the deployment utility. You can customize what gets installed with the engine by clicking on the Engine Options.
For more information on deployment, see Chapter 14 of the TestStand Reference manual (Help >> Search the TestStand Bookshelf...).
To answer your last question a run-time engine simply gives you access to the compiled code that corresponds to the functions you used from the CVI or TestStand libraries during development.
I hope that helps.
Best Regards,
Matt P.
Applications Engineer
National Instruments

How to transport the DATABASE TABLE into the Test system ?

Hi Experts,
I am working on BI7, I had created Database table in BDV system using SE11. Tech_name is ZGLACC_TEMP. I had activated it. I had used this database table for the purpose of writing the start routine in the transformation. while I am transporting the transformations to the test system, It is showing as syntax error in ABAP program,
In BDV system there are no syntax errors. it is working fine,
So now I have to transport the database table to test system so that I can transport the transformations into Test system without any error.
Kindly anyone can give the answer , it will be appreciate and points will be assigned.
thanks
sekhar

Hi Sekhar,
Go to SE11, go into the change mode of your table and change the Object Directory entry (Goto -> Object Directory Entry) to some valid package (other than $tmp). Then it will ask for a transport request. Give a transport request and then I believe you know what to do with that transport.
Another thing to keep in mind ... transport all the data elements and domains you have created for this table. Change their Object Directory Entry and assign them to the same transport request.
Best regards,
Kazmi

Transfer to ECC fails in the SCM 7.0 testing system

We use only DP and are upgrading from SCM 5.0 to SCM 7.0. The planning book from where we transfer the Demand Plan to to ECC has a time bucket profile set up where it is maintained in months and the display is in weeks. The transfer to ECC happens in weekly buckets. Beacuse of this in the testing system for SCM 7.0 - the transfer fails as the system says that "Transfer to R/3 with mixed periodicites is not allowed".
The transfer has worked fine in SCM 5.0 version for over 3 years. Any suggestions here will be greatly appreicated.
Thanks,
Sarita Doddi

Hi Sarita,
Please check the link below. It clearly states the data view used for the transfer process should have one periodicity only.
A planning buckets profile with one periodicity only (if it contains more than one periodicity, the job is aborted with an error)
http://help.sap.com/saphelp_scm70/helpdata/en/5f/176d4160168147e10000000a1550b0/frameset.htm
If you need different aggregation levels for the transferred demand (e.g weekly for 2 months forllowed by monthly for 10 months), you may have to release the demand in 2 steps.
Step 1: Release with a data view with only 2months in weekly buckets
Step 2: release with a dataview month 3 to month 12 in monthly buckets.
Regards
Ashok

Transferring the application from development system to test system

Hi All,
I have developed Web Dynpro application in one system ( which is development system) as "Local Object" . Now i want to transfer the whole application to another system ( which is the test system) .Can anyone please tell me the steps needed to transfer it.
Regards,
Muzammil.

Hi Muzammil,
There are 2 ways.
1. open the local objects right click copy the WD component and provide a package which is not a temp. object and then you can transport.
Note: when you copy the application will not be copied.
2. in se80. go to other functions -> write transport entries -> relocation of object with package change -> Provide a package and a description a
and your component is ready to be transported...
Create application before transport..
Hope this helps
Regards,
Kinshuk

Several test systems ?

Similar Messages

Maybe you are looking for