Several Views in separated files

Hello, i'm learnning Flex and i've got a dummy question. I was reading some books about flex and actionscript but i was not found the answer. The question is: when i create a new Application in flex, i have a <Application> tag, and all the code are in this file. I have several actionscript files but, if i want keep several views i am doing with Flex States, but: If i want do very different views? if i want to have the Views in a separated file?
Thanks for a lot.

For DW MX 2004 on Windows, go to Edit > Preferences >
Site. Set the
"Always show" menu to "Local Files on the Left". I think it's
the
same for DW MX.
Hope this helps,
David Alcala
Adobe Product Support
>I'm using DW MX (not 2004 or DW8), and somehow the Site
Files window's display
>of Remote and Local files got switched around. Now Remote
files are on the
>left, and Local files are on the right. Not a huge deal,
but it's
>counterintuitive to me, and I'd like to restore the
normal setup.
>
> How do I reset the view to the normal scheme? (Local on
left, Remote on right)
>I can't see any way to do it.

Similar Messages

Problems viewing large tif files in preview

i'm having trouble viewing large tif files in preview. the tif files are on a cdrom - when i click on the file to open it, it opens only the first 250 pages of the file. the file has approximately 3,000 pages. how can i get preview to open the rest of the pages?
thanks for any suggestions.
mac mini Mac OS X (10.4.6)

no trick - i didn't create the cdrom but it only has 3 tif files with approximately 3000 pages each, not 3000 large tif files. plus several smaller pdf files, but those aren't giving me any problems.
i don't know whether they're compressed, but i still can't get more than the first 250 pages to open, even after copying the file to my desktop. if anyone has any other ideas, i'd much appreciate it.
mac mini Mac OS X (10.4.6)

How can I quickly view pdf files like I can do with Windows Picture and Fax viewer for jpg files?

How can I quickly view pdf files like I can do with Windows Picture and Fax viewer for jpg files? I need to look at several thousand PDF files. It takes too long to open each one individually. The only thing I could think of is combining them into large groups and then using the Navigation index. But I like the way windows Picture and Fax Viewer does it because you can keep the files separate. Combining PDFs causes loss of individual file names. That would be a problem since I do need to have the individual file names.

Windows Picture and Fax Viewer is a DLL and is started via a rundll32.exe call and can't be set as an application to handle images in Firefox 3 and later versions.
Try to set Windows Picture and Fax Viewer as the default viewer in Windows, then it should be listed automatically in the Mozilla Firefox Browse dialog.
*http://www.winhelponline.com/articles/115/1/Windows-Picture-and-Fax-Viewer-as-the-default-viewer-in-Mozilla-Firefox.html
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

The finder window for an external USB hard disk suddenly started separating files by time (today, yesterday, etc.) and stopped allowing me to change column width, order, etc. Also the header bar shifted to flat white from gray.

The finder window for an external USB hard disk suddenly started separating files by time (today, yesterday, etc.) and stopped allowing me to change column width, order, etc. Also the header bar shifted to flat white from gray.
All was normal until the icon for the disk stopped showing up on the desktop when I would plug it in. I rebooted the computer, and the disk icon now shows up but this new look to the finder window started as a result. The hard disk does not have this problem when I use it on another Mac running Snow leopard. Also, two other external hard disks that I use on this computer running lion 7.4 still have the normal header bars with columns that can be reordered, etc.
I have tried looking in preferences and other places but have not seen this discussed.

Well duh - I finally figured out that somehow in the View options for the hard drive, the "arrange by" option had been changed to "by date" from "none". Not sure how that happened, I had never used the "view options" menu tem before. Changing "arrange by" back to "none" gets the gray column headers and the collapsible folder icons back.

Is it possible to make master pages with several title in one file? & Can I define page range from

Is it possible to make master pages with several title in one file? & Can I define page range from which page to which should be specific title?

While the number of master pages is not unlimited, you can have quite a few in any file. I've never seen the limit documented, but it's in the hundreds, or more likely thousands. There is, I believe, a page limit of 9999 pages per document, but I don't know if that includes the masters or if they are counted separately.
You can choose a page range in the Pages panel, then assign a master to them manually, and I beleive there are some scripts floating around that can assign a master page based on the appearance of a paragraph style (for chapter start pages, for example).

View the .rtf file not display the data in BI Publisher Enterprise.

Hi,
Platform: OBIEE 10g in NT XPsp2
View the .rtf file not display the data in BI Publisher Enterprise.
Step 1, I created Answer-request, create .rtf file with Word and add the request name, Add bar chart and table, preview PDF is working fine with data, Upload this template to Answers, View Template from Answer is working fine with data.
Step 2, Answers – More Products > BI Publisher > My Folders > Create a new report > Edit > Data Model > New > Type: SQL Query > Data Source: Oracle BI EE > Query Builder > from SupplierSales assign Customer, Periods, Sales Facts (select Region, state, Year, Units Shipped) > Results > Save > Save
Click Layouts > New > enter Name ….. > Click Layouts > borrows .rtf file in Manage T file > Upload > Save > Click View
It is showing only the .rtf file without data. Why there is no data?
Please guide me to solve this issue.
Thanks,
Jo

Thanks for you reply,
Our scenario is this report is basically a dissconnected mode report... we are developing these reports for mobile clients.
We dint face this kind of issue while developing other reports.
So please let us know if you have any idea on why we are facing this issue.
Regards,
Maneesh

Viewing Animated GIF files in Preview

Hello...
I'm trying to figure out why I cannot view animated GIF files within Preview. When I search within Preview's help I get this...
*1. Open the animated GIF file in Preview.*
*2. If the window's drawer isn't already visible, choose View > Drawer.*
*The drawer contains a thumbnail image for the animated GIF. The number of frames in the animation appears in the lower-right corner.*
*3. Click the triangle beside the thumbnail image.*
*Preview shows all the frames in the animated GIF. When you click a frame, the animation stops and Preview displays that frame.*
Now at the end of number 3 it states that "the animation stops", so according to that statment Preview should be "playing" the animation until I click a certain frame to stop it. Well mine doesn't do this, SO what's going on?
Oh, my OS is v10.4.10 and Preview is v3.0.9(409).
Thanks!

Preview in Panther did play animated gifs, although it was a bit clunky at it. Evidently they intended to fix this in Tiger, but instead they ended up breaking it completely. To play an animated gif you now need to do so in a browser, such as Safari. Preview no longer plays them at all.
Francine
Francine
Schwieder

How to view aspx PDF files in Safari 4.0.3

Hi,
Using Safari 4.0.3 on os 10.5.8. I'm trying to view PDF files that are supposed to be viewed and editable within the browser (this is how the site works on a pc using internet explorer). When I click the relevant icon on the site, the site asks me if I'm sure I want to view that file (this is normal), and I click accept. Then Safari simply downloads the aspx file into the downloads folder. To the extent I could open the aspx manually using Reader (I can't), it wouldn't help anyway because the file is meant to be edited within a web browser, and within the pdf there are options to "save," "save and close," etc. I need to be able to open and view this file from within Safari.
I have the latest Adobe reader and made sure the settings allowed for opening of PDFs from the internet.
Any thoughts?
Thanks.

I concur with Kirk Olson1's comment above, and have been unable to solve this 'til reading this post.
Change the .aspx extension of a saved file to .pdf and presto, Preview opens the doc for reading without complaint. This may not solve the problem the user has with editing the file within their browser. But the .aspx file, without a doubt, is in fact a file of "some" sort that is readable by Preview. As to the properties of editing the file, I can't speak to that. Since I am using this to read and save my bank statement, I would hope that the ASPX file is a signed document that can't be edited without the change being detectable... otherwise, what purpose is served by introducing a new filename extension ASPX for PDF files???
I've had the same "Browser can't view/open ASPX file" problem under Mac OS 10.5.* and Safari and Firefox. A bank provides me with "PDF" files (so they say) that download (to view, or file-save-as) with the .aspx filename extension. Firefox 3.5.* doesn't handle them. I've not downloaded Adobe products to my Mac and have avoided doing so because I don't want Adobe mucking with the way Preview works, etc.
In an experiment, I am unable to coerce Preview to open a copy of the same file while it had the .aspx extension (via Ctrl-Click the aspx file, Open_With, Enable All Applications to Open). Preview just sits there without opening the file, no error dialog, and I don't see any telltale warnings in the console log either. The same file, with a filename extension changed, no problem opening and viewing.

How do I view ipod music files with out using I tunes?

I trying to view my Ipod music files without using itunes. But when I conect my Ipod to my pc I can only view contacts, notes, and caladar through the driver.
How do I view ipod music files with out using I tunes?

they should be under ur my music folder if u have windows

Read Tilda separated file from Application Server

I have a requirement to read a tilda separated file from application server and write a tilda separeted output to application server. Please suggest how to to get data from tilda separated file to internal table ? and also How to create a tilda separated file from internal table to application server.

Hi again,
This some sample code for outputing data on application server with tilda separator.
OPEN DATASET p_file FOR OUTPUT IN TEXT MODE ENCODING DEFAULT. " MESSAGE msg.
IF sy-subrc <> 0.
     message i812(LQ).
     LEAVE LIST-PROCESSING.
ENDIF.
LOOP AT gs_input INTO wa_input.
    CONCATENATE wa_input-wadat_ist
                wa_input-sort2
                wa_input-name1
                wa_input-street
                wa_input-region
                wa_input-post_code1
                wa_input-zzchep
                wa_input-vbeln
                wa_input-bstkd
                wa_input-zfrom
                wa_input-zland
                wa_input-zccode
                wa_input-zrcvd
                wa_input-zfref
                wa_input-znorc
                wa_input-zsepr
                wa_input-zvers
                wa_input-zlout
                wa_input-zinfo
                wa_input-zinco
                wa_input-zsqal
                wa_input-zscod
                wa_input-zrqal
                wa_input-zeqal
                wa_input-zecod
                wa_input-zcust
                wa_input-ztran INTO g_path SEPARATED BY '~'.
    TRANSFER g_path TO p_file.
    CLEAR : g_path, wa_input.
ENDLOOP.
CLOSE DATASET p_file.
Hope this will be helpful for you.
Regards,
Vijay

~~~how can i view a pdf file in a servlet?~~

hi..
i just need to view the .pdf files in a servlet page.all the pdf files are stored in my web module(i am using the glassfish server).can anybody tell me how to do it?
thanks a lot....

Provide a link? I mean, linking a PDF in an HTML page is hardly a Java programming problem.

Viewing .pct / .pict files in Bridge CS3

Hello there, I'd like to view .pct / .pict files in Bridge, but I am not getting any previews. I've tried to find a topic about this but haven't had any luck. Does anybody know a way to view them... a plug- in maybe. Or is that going to be the 'way it is'?
Actually just jumped on a MAC and pct files do preview, but no luck on any of the Windows machines.
Thanks a million!

That IS odd. I saved a file from Photoshop as a 32-bit .pct and I can
confirm that Bridge (on Windows) does not preview or thumbnail it. On the
other hand, I can't find any other program, free or pay, that fails to view
the file, so it obviously presents no technical difficulties...
Regards,
Trez

Mavericks 10.9.1. Freezes or trackpad becomes slow and unresponsive when viewing downloaded PDF files in Preview.Help!

The earlier post was my first attempt at posting and had some typos. Repeated with typos corrected.
I have a Macbook Pro Retina 13" Late 2013 with preinstalled Mavericks.I now have the 10.9.1 update. Almost from the time of purchase in Nov '13, I have been experiencing freezes and slow & unresponsive trackpad. I have more or less narrowed this symptom as happening when viewing downloaded PDF files. The only option is to force eject, if available or shut down. I spoke to Support as I thought it was a RAM issue and they told me that in Mavericks RAM showing almost full was normal as it uses RAM differently. They took me through some resets and cleaning up which has helped a little but freezing stll happens. This never happened with my Macbook AIr running Lion. Any suggestions?
Shankar9
Macbook Pro Retina 13" Late '13-Mavericks 10.9.1
Macbook Air 13" Mid '11-Lion
Macbook Aluminium 13" Late '08-Snow Leopard

So a PDF file that you can view in Preview on your MBA causes your new MBP to lock up and/or slow down. Is this right? Also you say more or less narrowed down to PDFs with Preview but does the computer exhibit this behavior with other programs and if so under what conditions? And how much free hard drive space do you have?
Viewing memory use in Mavericks is different than with previous versions of the OS. Today it looks like we need to pay attention to what Apple calls Memory Pressure which is gauged by the bar graph in Activity Monitor and to the Virtual Memory being used. When the memory pressure graph bar gets too high it turns red and that's bad news. Looking at how much memory is being used doesn't help - I have a 16GB computer and with almost nothing running it still shows something like 15.79GB used but the memory pressure graph is just a think green line. So unless you see the memory pressure bar turning red lets not worry about memory usage at the moment.
If among the things AppleCare had you do was reinstall Mavericks then I recommend a trip to the Apple store - and take a problem PDF file with you to demonstrate.

Hi. Having trouble viewing a downloaded file from a site. iPad is telling has not got a app to open file ,but have downloaded so many now and none of them are any help. Tried this on my android phone still nothing. Please can anyone help as slowly ma

HHi having trouble viewing a downloaded file from a site my iPad is telling me I don have a app to open file . And have downloaded loads of apps and still no joy . Have tried this on my android phone to and still nothing. Please can anyone help as slowly going crazy. Thanks tim

What type of file? From what site? What Apps have you downloaded for it?
Perhaps if you provide details of what you are doing we can provide more precise help.

View Crystal Report File from SDK

Hello All,
I want to View Crystal Report File (.rpt file) from SDK (using VB 6 )
I have already try following code on my Add On :
   Public Sub RunCrystalReport()
   Dim crlApp As New CRAXDDRT.Application
   Dim crlRep As CRAXDDRT.Report
   Set crlRep = crlApp.OpenReport("D:\ReportTest.rpt")
   Dim CRAX2 As CrystalActiveXReportViewerLib12Ctl.CrystalActiveXReportViewer
   Set CRAX2 = Form2.CRAX
   CRAX2.ReportSource = crlRep
   CRAX2.ViewReport
   End Sub
But, nothing happen
Could some one help one for this ?
Thanks a lot
Regards,
Arie
SDK Beginner

Amazing Sir !!...
I could run my report through B1 SDK right now...
Many thanks to you Sir..
Just one more thing, The Horisontal and Vertivcal Scroll control wasn't appear. Do I have to add scroll object or someting like that
Many thanks again to you Mr. Porcelli
Arie

Several Views in separated files

Similar Messages

Maybe you are looking for