Severbackup not saving postgres dump in .ServerBackups folder?

It seems that the resulting backups generated by serverbackup don't all end up in the .ServerBackups folder in the root of the TimeMachine backup.
The OD sparse image ends up in /private/var/backups
The postgres dumpall.psql.gz ends up in /Library/Server/PostgreSQL For Server Services/Backup
Call me crazy, but it seems like the backup should land in .ServerBackups. Is this normal? Are there any bits spread around outside of the .ServerBackups folder, /private/var and /Library/Server? I'm workinging with a hosted mini and don't want to have to TimeMachine one entire drive to the other just to grab some simple service data.
Thanks.Peet

Check out my rotating backup script for an alternative:
http://www.practiceofcode.com/post/44574319896/updated-postgresql-backup-scripts -for-10-8-2-os-x

Similar Messages

How can I import my library that is saved on a external hard drive but it's not saved on the iTunes media folder?

I need to restore my computer to it's factory settings but I don't want to loose my playlists and my library (windows). I can copy any file from the computer because it's in good working order. All my music it's on a external hard drive, but there's lots of media files that I don't want to sync but need to keep! Any way to do that!?
Best Regards

h.cordero wrote:
I think that I didn't explain my self correctly, My iTunes media it's not consolidated. May I consolidate the media on a external drive (X:\). ?
Yes. But consolidate to X:\iTunes\iTunes Media.
The why I'm asking is because the music library (176gb) is way more than the computer drive (C:\). Remember that all the media is on a external hard drive (J:\)
The steps I gave earlier will work to copy the whole library onto the new drive, in the correct layout for future ease of use.
tt2

IWeb not saving changes when published to folder

Hello,
I'm very new to iWeb and to the whole web-design in general. My problem is when working in iWeb, and I save (or publish, if it isn't the same) to a folder, it goes fine the first time. But when I republish (I use republish in order to save my project) the changes I've just made i'snt there. When I go to the folder to check my website from the, I can't se changes there. That's very anoying (or how it's spelled )
Here's what I find odd:
ONLY when I restart my computer, the changes are there, and I can see them.
Why is that, and what do I do?
Kind regrds
Palle
Denmark

This may be too late to help you, I've just started to work with iWeb myself and discovered that if you go to the File Menu, you should see the option "Publish Site Changes", Click that and it will save the changes.
I've also noticed that the pages in the list on the left are 'red' if you've made changes to them and haven't published the changes, and blue when you have published.
(I'm also publishing to a folder for now)
Elizabeth

Downloads not saving to Downloads folder

Downloads are not saving to the designated "Downloads" folder in My Documents.
Instead, they are saving to C:\Documents and Settings\{username}\Local Settings\Temp.
Tools/Options setting is pointed at Downloads, but the files just aren't saving there.

It is possible that your anti-virus software is corrupting the downloaded files or otherwise interfering with downloading files.<br />
Try to disable the real-time (live) scanning of files in your anti-virus software temporarily to see if that makes downloading work.
See "Disable virus scanning in Firefox preferences - Windows"
*http://kb.mozillazine.org/Unable_to_save_or_download_files

Sent messages aren't saved in the Sent Items folder in Outlook 2013

When we send a message in Outlook 2013, a copy of the message should be saved in the Sent Items folder by default. If Outlook doesn’t save a copy of the sent message, it may be caused by any one of the following
reasons:
The “Save copies of messages in the Sent Items folder”
option in Outlook is disabled.
The save location for sent messages was changed to another folder.
There is a custom view set on Sent Items folder, or the view on
Sent Items is corrupt.
Outlook Data File may be damaged.
To resolve the issue, use the appropriate method for your situation.
Enable the Save copies of messages in the Sent Items folder
option
To configure Outlook 2013 to save copies of your sent messages in the Sent Items folder, please follow these steps:
1. Click File tab > Options.
2. Click Mail on the left pane.
3. Scroll to the Save Messages section, select the check box before “Save copies of messages in the Sent Items folder”.
4. Click OK.
If it is the replying message that is not saving to the Sent Items folder, we need to disable the “When replying to a message that is not in the Inbox, save the reply in the same folder” option in the location mentioned above.
If you’re using an IMAP account, please also make sure you didn’t select the “Do not save copies of sent items” in Account Settings. To check this, Please refer to the following steps:
1. In Outlook, click File tab > Info.
2. Click Account Settings > Account Settings, and then double-click your IMAP account to open the
Change Account wizard.
3. Click More Settings button.
4. Under Sent Items heading, clear the check box before “Do not save copies of sent items”.
5. Click OK and click Next to complete the configuration.
Make sure there is no rule or anything else to redirect sent messages to other folders
To check if it is caused by Outlook rules, please follow these steps:
1. In Outlook 2013, click Home tab.
2. Click Rules > Manage Rules & Alerts.
3. In the rules list, check if there is any rule that applied to the sent messages may cause this issue.
In addition, some rules may be corrupt or hidden and we cannot see them from the rules list. We need to use the MFCMAPI tool to find and delete the corrupt/hidden rules. To do this, we can use the following steps:
1. Download MFCMAPI tool from: http://mfcmapi.codeplex.com/
2. Start MFCMAPI tool.
3. Click Session menu >
Logon, select the Outlook profile you are using and click OK.
4. Double-click the mailbox that contains the inbox rules that you want to delete.
5. A new window will open. In the new window, expand
Root Container or Root – Mailbox, and then expand
Top of Information Store or IPM_SUBTREE.
6. Right click on Inbox and select
Open associated contents table.
7. In the Inbox window, locate and then right-click the items that have the
IPM.Rule.Message message class, and then click Delete Message.
To identify a specific rule, you’ll have to select the rule in the top pane in MFCMAPI and then scroll down in the lower pane and look at the
Property name(s) column. Find the ptagRuleMsgName property name and check the value against the rule name you were trying to delete in Outlook.
8. In the Delete Item dialog, select
DELETE_HARD_DELETE from the Deletion Style drop-down menu.
9. Click OK.
Reset the view settings on Sent Items folder
If you accidently changed the view settings on Sent Items folder, this may cause some sent messages not visible in the folder. To check if you’ve set any view settings on Sent Items folder, please follow:
1. In Outlook, select Sent Items folder.
2. Click View tab from the Ribbon.
3. Click View Settings button. If you notice the
Reset Current View button is clickable, it means the view settings for Sent Items have been changed before.
4. Click the Reset Current View button and then check the Sent Items folder again.
Scan and repair the Outlook Data File
To repair the .pst file, please follow:
1. Find and start the Inbox Repair Tool in the following path:
For Outlook 2013 on a 32-bit version of Windows:
<disk drive>\Program Files\Microsoft Office 15\root\office15
For Outlook 2013 on a 64-bit version of Windows:
<disk drive>\Program Files(x86)\Microsoft Office 15\root\office15
2. In the Inbox Repair tool, click Browse to locate the PST file by using the Windows file system.
3. Click Start.
4. After the analysis scan has completed, it will present you with a scanning report and options for the next step. Click Repair button.
To repair the .ost file, since this type of data file is a copy of information saved on your mail server, we can just delete the OST file and restart Outlook to re-create a new one.
For more information about repair Outlook data files, please refer to this article:
Repair Outlook Data Files (.pst and .ost).
If you have any comments on this topic, please feel free to post here.
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Same problem here, connecting to a Groupwise (not latest) server. Whenever Mail.app 3 tries to upload/save a new messsage to the server, it would not save and completely lose the message!
I found slightly more information by turning off the "Save to server" option for Sent and Drafts, created a new message that I saved as draft, and then tried to manually move items to the Drafts or Sent folder on the IMAP server.
The error I received was: The message <message> could not be moved to the mailbox <mailbox>-<account>. The IMAP command "APPEND" (to <mailbox>) failed with server error: APPEND NotJunk.
To my inexperienced eyes, it looks like the latest version of Mail changed it's default IMAP handling commands that may be incompatible with older IMAP servers. Anyone else have more insight or know how I can get back Mail.app 2.x from Tiger?

Some sent mails do not appear/are not saved in "sent messages" and are lost

i work with mail and 4 different imap accounts. about every 15th sent email "gets lost". i.e. i can follow the sending process in the activity window, and i hear the sending confirmation tone. and, usually, the mails even reach the receiver. BUT, the mails do not appear/are not saved in the "sent messages" folder and are lost. this is very unsettling, as there seems to be no recognizable pattern. can anyone help, or should i change to "entourage"? big thanks for replies
Message was edited by: Bassolino

Hi Bassolino and David,
I, too, have had this intermittent issue and wonder if you had found a solution?
In the past 3 weeks, two messages have been sent from my mac mail account, using the mail application (the only apparent common factor being that both messages had iphoto attachments), the recipients have received them - only I do not have a copy in my 'sent' folder.
They are not stored on the macintosh server either...
I have not altered any settings and this intermittent issue has just emerged.
Any help from 'Top Users' would be welcome. Thanks.

When I take a picture it is not saved in photo app

Hello,
I just bought a new IP4 and when I take a picture it is not saved in my camera roll folder (which doesn't exsist by the way).
Same problem for the videos. I can record one but I cannot have a look at it because it is not saved in the PHOTOS app.
Can someone help me out?
Regards,
Greg

Hi there christinefromsafety harbor,
You may want to try force closing all open apps and resetting the device as an initial troubleshooting step. Take a look at the articles below for more information.
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Turn your iOS device off and on (restart) and reset
http://support.apple.com/kb/ht1430
-Griff W.

Downloads of updates not saving, no prompts or icons in the Application folder-how do I ensure updates are saved?

I am following the instructions to download v 6 but receive no prompt to move the Firefox icon to the applications folder. I have done that anyway, but it's not saving-the latest version is July 11. I then get reminders to update all the time-what am I doing wrong?
I am working on a Mac laptop

A lot of people panic when they see Photoshop displaying differently from other software. But that's normal and expected. Here's what happens:
1. Photoshop is color managed and performs a document profile > monitor profile conversion when it displays. So whatever the document profile is, Photoshop will display correctly - unless you have CM policies set to "off" (...!)
2. Other applications, including many web browsers, aren't color managed and will just send the file numbers directly to the display. This distinction is extremely important, because there will be a slight difference. Again, that's normal. Photoshop is right and the other apps are wrong.
3. Without color management, it all hangs on how your monitor displays color. Most monitors are so close to sRGB that any sRGB file will display roughly correctly. This is why sRGB is the de facto web standard: it can live without color management. And that's why you should always convert web material to sRGB. Yes, that's the Edit > Convert to Profile option. You can also use Save For Web to do this if you check the appropriate boxes.

Mail attachments not saving to the folder I choose

My mail attachments are not saving to the folder I choose. When I select a file to save in the mail drop-down box, I am given options to save to a folder of my choice. However, when I select save the document is actually saved deep in some Mail Downloads area, not in my chosen folder. Has anyone had a similar problem and found a solution?

What kind of files are you trying to attach?
Is it all recipients having this problem or specific one(s)?
Could you possibly post a screenshot of the sent message from your side and a screenshot of what the recipient sees?
What happens if you send one of these messages to yourself?
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.
"All knowledge is worth having."

Using Windows: Send to -- Mail recipient, msg is sent OK, but not saved in Sent folder, with err msg about it. Sending from within Thunderbird: msg saved OK.

When using Windows 8.1 context menu: Send to --> Mail recipient, message is sent OK, but not saved in Sent folder, with error massage: There was an error saving the message to Sent. Retry? (selecting Retry doesn't help).
Similar issue happens when I open a ".eml" file and Reply of Forward it.
When composing a new message from within Thunderbird, all is OK, including saving in the Sent folder.
Already tried:
Compacting the Sent folder.
Compacting all folders of the account.
Uninstall Thunderbird and install the latest version (31.6.0).

When using Windows 8.1 context menu: Send to --> Mail recipient, message is sent OK, but not saved in Sent folder, with error massage: There was an error saving the message to Sent. Retry? (selecting Retry doesn't help).
Similar issue happens when I open a ".eml" file and Reply of Forward it.
When composing a new message from within Thunderbird, all is OK, including saving in the Sent folder.
Already tried:
Compacting the Sent folder.
Compacting all folders of the account.
Uninstall Thunderbird and install the latest version (31.6.0).

Files not saving correctly in section of the folder CS4

When I go to retrieve a saved JPEG to upload to an editor, the jpeg is stored in the folder, but not accessibe by "day" some of these jpegs are ending up in folders within the folder for exampe June 2009 . I am just opening the folder and saving it in the general folder.
This is very annoying.
I have just upgraded to Win 7 from Vista.
I should have quick access to the photos by the current month or day-

There is a difference between Save and Save As in QuickTime Player. When you Save after trimming, the trimmed data remains in the file and takes up the same amount of space as before. When you Save As, the trimmed data is not included and you end up with a smaller file.
I don't know why CS5 is behaving differently but it's more efficient to Save As and it will solve the CS5 problem too.

Message not saved in sent messages folder

Hi everybody,
When I send a mail by the Collaboration Launch Pad and check the option: "Save copy in Sent Messages Folder" I get this error:
"Message has been sent, but could not be saved in the sent messages folder; check the mail server entry in your user mapping data."
Please is anybody there who can help me to properly configurate that option or tell me how to remove it from the body?
Thanks in advance,
Antonio

Hi Antonio,
Saving the mesage means writing that e-mail in the senders "sent item" folder in the mailbox. Thus make sure that the users mail server name and user and password is correct for the system Exchange.
Also check SAP Note 738965.
Also there is this this specific port that should be open on the SMTP server for the mail to be saved in the "sent items" folder. I dont remember what port is it. Will try to figure out and let you know.
Also make sure that your Exchange transport has the sent items folder name.
Akhilesh
Using telnet check that the SMTP server can be reached on port 25. If not then there is no way you can save the messages in the sent items folder using the collaboration tools.
Message was edited by: Akhilesh Mahto

Warehouse Task NOT Getting Saved, getting dump "Posting_illegal_statement"

HI All,
While trying to "create + save" warehouse task for the inbound delivery (in EWM 9.1) , warehouse task numbers are getting generated but not saved. I am getting an update error saying "update was terminated for author ___" . On checking the dump in ST22, it mentions the error as "POSTING_ILLEGAL_STATEMENT" ,ABAP Program "SAPLSYDB" and application component "BC-DB-DBI".
Please help.

Hi Jayson,
The error is related to the ABAP coding of the particular program. The program related to sales and billing.
The error you get must be the user own output screen.
Please refer to the SAP Note for further analysis and solution.
http://service.sap.com/sap/support/notes/1472777

Windows 8.1 folder view settings not saved

Hello, Everyone
Windows 8.1 Each folder view settings not saved what i can do.I
want different view settings in each folder likes folder 1 i want large thumbnails & folder 2 small
What i can do to resolve the issue thanks in advanced.
I don't have any backup no system restore I also try to rest or restore default view settings but none are working for me.

Hi,
This is default behavior. It is not possible to set Windows Explorer to remember individual folder view settings for folders included in libraries. All libraries and its included folders share the same view.
Karen Hu
TechNet Community Support

Email sent from an icloud alias not saved in sent folder

I have a couple aliases set up for my primary icloud email account.
When I send a message from my "primary" email address (using the pull-down list to select the "From:" address) a copy of the message appears in the Sent folder. However, if I select one of the aliases as the "From:" address, the message is delivered to the recipient but does NOT show up in the Sent folder. Anyone know why?

The "recall" feature is not a feature of Outlook. It is a feature of Microsoft's proprietary Exchange system, and it only works if you and the recipient are both using Exchange Server email accounts.
http://office.microsoft.com/en-us/outlook-help/how-message-recall-works-HA001091 760.aspx
iCloud does not use Microsoft Exchange - it uses the industry standard IMAP protocol for email.

Severbackup not saving postgres dump in .ServerBackups folder?

Similar Messages

Maybe you are looking for