Severe Error Ocurred on the Current Command REPORT BUILDER SSRS 2008

Hi,
I have a report with 6 tabs, I am using totally 8 Stored Procedures for it.I am using SQL SERVER 2008 R2 and the same in production also.
Everything works fine when I run the report in my local machine's BIDS, however, when I deploy it into the Production, it occasionally gives an error which reads "An error has occurred during local report processing. (rsProcessingAborted). Query execution
failed for dataset 'DS_xxxx'. (rsErrorExecutingCommand)
A Severe error occurred on the current command. The results, if any, should be discarded. Operation cancelled by user.
When I ran the SPs individually in the SSMS they are executing fine and the report itself works fine always in my local BIDS.
Also, This issue happend several weeks after the report was deployed to the production, i.e. it was working fine but suddenly it started giving this error, so I changed the global temp table I was using to a permanent table and then it worked fine for a
few more weeks, now, again, I am getting the same error occasionally, is there any way to avoid this error completely and can you list all the possible causes for this error, because it happens 2 times out of 5 runs so it is difficult to debug it also.
As for the Report it self, It is a simple report with a few spark line Charts and a mostly data charts. I am not using any CTEs or Global Temp Tables anywhere in the report.
Thanks You.

Hi,
I would suggest you increase the time out on the reports to 3600 and how it works.
You can set a default value for all reports in the Site Settings page.
The default timeout in SSRS for reports is 1800 seconds.
If still no progress, please check the RS log.
For more information, see
Set Report Processing Properties.
Thanks.
Tracy Cai
TechNet Community Support

Similar Messages

MS SQL server is going down frequently(10 days of gap) with exception message: "A severe error occurred on the current command. The results, if any, should be discarded".

MS SQL server is going down frequently(10 days of gap) with exception message: "A severe error occurred
on the current command. The results, if any, should be discarded". We are facing this issue for past two month.But funny thing is server will be up automatically with out any service restart manually. Also if we try to restart the SQL
server service manually then SQL server will be in a dead lock situation and it will not come up even if we wait for long time. Then we should do a windows server machine restart to
make the SQL sever up. As a suggestion from Microsoft to fix this kind of similar issue,
we have installed service pack 3 for SQL Server. But even after we are facing same issue.
Server Details:
Server OS: Windows Server 2008 R2
Two type of database servers are installed on server:
1. MS SQL Server 2008 R2
2. My SQL
Also Reporting server is configured for the purpose of generating SSRS report from a dot net website.
NOTE:Immediately after the data retrieval/save, we are closing the connection explicitly by the
application.
we have checked the windows event log and below are the details:
Log Name:      Application
Source:        ASP.NET 4.0.30319.0
Application information:
    Application domain: /LM/W3SVC/5/ROOT-1-130718142067856406
    Trust level: Full
    Application Virtual Path: /
    Application Path: E:\WebSpaceFolder\ACSQuiK\Production\
    Machine name: DBSERVER
Process information:
    Process ID: 148
    Process name: w3wp.exe
    Account name: NT AUTHORITY\NETWORK SERVICE
Exception information:
    Exception type: SqlException
    Exception message: A severe error occurred on the current command. The results, if any, should be discarded.
   at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
   at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
   at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
Log Name:      Application
Source:        Report Server Windows Service (MSSQLSERVER)
Description:
Report Server Windows Service (MSSQLSERVER) cannot connect to the report server database.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Report Server Windows Service (MSSQLSERVER)" />
    <EventID Qualifiers="0">107</EventID>
Could anybody can suggest any kind of fix for this issue? Thanks in advance.

Hi YesYemPee,
I have tried but still not clear about your issue, I would like you provide more details information about your issue based on below points to better analysis about the issue:
What action did you do and caused the error "A severe error occurred on the current command. The results, if any, should be discarded", did you run report on the web application or something else then the error happen?
If you rendering the report and got the error, please try to provide us more error information in the log files which path like:
C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVER\Reporting Services\LogFiles
If it is not the case in step1, Please try to provide SQL Server Error log(SQL Server Logs) and more details information.
If you still have any problem, please feel free to ask.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support

A severe error occurred on the current command - select into

Hi
I am making a backup of a table before working on the original, but when I try a simple select into statement I receive 'Msg 0, Level 11, State 0, Line 0 - A Severe error occurred on the current command. The results, if any, should be discarded.'
I am able to run a select query on the original table with the same where clause I am using in the select into statement and it runs without error.
Does anyone know why this is happening?
Server 2008 64bit, SQL Server 2008r2
Thank you for any help

This is a generic message that informs you that something went very wrong, either in SQL Server itself or in the client API.
If open a command promptt and try the same command running from SQLCMD or OSQL, what happens? If things seems to work well, run a simple second command like "SELECT 1" to make sure that this works. (The use a different API from SSMS, why it is
worth testing.)
Also look in the SQL Server error log. If you see a stack dump which appeared at the same time as you ran the SELECT INTO statement, then it's clear that the accident was in SQL Server.
I would recommend that you run DBCC CHECKDB on the database, as the root cause could be corruption.
Erland Sommarskog, SQL Server MVP, [email protected]

A severe error occurred on the current command. The results, if any, should be discarded(Not Always)

We have a DotNet website which is deployed on a physical server(windows server 2008 r2). The application is started to using for live. Most of the time application is working fine. But some times we have noticed the application is failed to communicate
with MS SQL 2008 R2 database and as result the below error is displaying:
"A severe error occurred on the current command. The results, if any, should be discarded. at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject
stateObj, Boolean callerHasConnectionLock, Boolean asyncClose) at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean&
dataReady) at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) at System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean
enlistOK) "
If we tried to connect the database server the same issue is showing:"A severe error occurred on the current command. The results, if any, should be discarded"
The issue will be resolved automatically after 30-45 minutes . Please let us know if any fixes can be done to resolve this issue.
NOTE: We have installed SQL Server 2008 service pack 3 as per the suggestion from experts .But still the issue pwersist.

Hello,
When this issue occurs have you check the existing connections? If an app was unclean developed it can happen that the app opens connection by connection, but never closed them correctly and when all available connections are in use, such an error can occur.
Olaf Helper
[ Blog] [ Xing] [ MVP]

"A severe error occurred on the current command. The results, if any, should be discarded." + Full-text-index Sql Server 2008 R2 SP1

Hello.
I have a problem with SQL Server 2008 R2 SP1:
I have a table with the full-text index-activated on 3 fields of type nvarchar.
When I try to open a transaction (ex: BEGIN TRAN {inserts} COMMIT) to insert multiple rows, I get the following error: "A severe error occurred on the current command ...".
I checked the Sql Server Logs and the Event Viewer on the machine, but nothing was logged.
I found a workaround: disable full-text-index => Do stuff => enable full-text-index, but this is very annoying (especially when i use the Data Compare to update that table on the Development Environment).
Help!!!

I concur with Tom. Upgrade to SP3. This may resolve the issue.
Since you say that there is nothing in the SQL Server errorlog, this may be an API issue. Try running the same commands through the command-line tools SQLCMD or OSQL to see how this turns out.
Erland Sommarskog, SQL Server MVP, [email protected]

A severe error occurred on the current command. The results, if any, should be discarded.

I have a strange situation on a database, which are on SQL Server 2008 R2 Express SP2. The database size is something around 90 MB.
When a user try to insert a record inside one table, he receive an error message, and the program is disconnected from the database. I tried to investigate this issue, and I discovered that when user try to insert one row the trigger for
insert invoke also the trigger for update and sql server crushes with "A severe error occurred on the current command. The results, if any, should be discarded."
I have checked from SQL Server Management Studio to run a direct Update on the specific table. The same error occurred.
I have run DBCC CheckTable and no errors have been found. I also have run DBCC CHECKDB and no errors.
Because I also have 3 other different databases, with the same functionality, on the same server which are going well with more than 100 000 records in that specific table, and the triggers are going well for more than 5 years, I have assumed that some
problems occurs inside the database. That is why I have copied all the records from the "damage" database to a new one. This means that inside the new databases the indexes are regenerated and a new space will be allocated.
The same strange things are happening. The same table can not be updated with a very basic Update statement.
I am looking for a patch or KB to solve this issues.
Any ideas are will be appreciated.
Thank you

there is a file as response to one of my tests to investigate which command is responsible for this error.
Current time is 21:18:39 08/18/13.
=====================================================================
       BugCheck Dump
=====================================================================
This file is generated by Microsoft SQL Server
version 10.50.4000.0
upon detection of fatal unexpected error. Please return this file,
the query or program that produced the bugcheck, the database and
the error log, and any other pertinent information with a Service Request.
Computer type is Intel(R) Core(TM) i7 CPU         860 @ 2.80GHz.
Bios Version is INTEL - 1072009
BIOS Date: 09/23/09 11:58:43 Ver: 08.00.10
8 X64 level 8664, 2 Mhz processor (s).
Windows NT 6.1 Build 7601 CSD Service Pack 1.
Memory
MemoryLoad = 16%
Total Physical = 8125 MB
Available Physical = 6755 MB
Total Page File = 16248 MB
Available Page File = 14719 MB
Total Virtual = 8388607 MB
Available Virtual = 8380163 MB
***Stack Dump being sent to d:\MSSQL10_50.MSSQLSERVER\MSSQL\LOG\SQLDump0084.txt
SqlDumpExceptionHandler: Process 52 generated fatal exception c0000005 EXCEPTION_ACCESS_VIOLATION. SQL Server is
terminating this process.
* BEGIN STACK DUMP:
*   08/18/13 21:18:39 spid 52
*   Exception Address = 0000000000886B00 Module(sqlservr+00000000001F6B00)
*   Exception Code    = c0000005 EXCEPTION_ACCESS_VIOLATION
*   Access Violation occurred writing address 0000000000000000
* Input Buffer 214 bytes -
*               begin transaction    insert into DocContabile   select * f
* rom gunoiDocContabile      rollback
* MODULE                          BASE      END       SIZE
* sqlservr                       0000000000690000 00000000042A1FFF 03c12000
* ntdll                          0000000077730000 00000000778D8FFF 001a9000
* kernel32                       0000000077510000 000000007762EFFF 0011f000
* KERNELBASE                     000007FEFD6E0000 000007FEFD74AFFF 0006b000
* ADVAPI32                       000007FEFE090000 000007FEFE16AFFF 000db000
* msvcrt                         000007FEFE300000 000007FEFE39EFFF 0009f000
* sechost                        000007FEFF590000 000007FEFF5AEFFF 0001f000
* RPCRT4                         000007FEFF5B0000 000007FEFF6DCFFF 0012d000
* MSVCR80                        0000000071710000 00000000717D8FFF 000c9000
* MSVCP80                        0000000071600000 0000000071708FFF 00109000
* sqlos                          00000000715F0000 00000000715F6FFF 00007000
* Secur32                        000007FEFD1E0000 000007FEFD1EAFFF 0000b000
* SSPICLI                        000007FEFD3B0000 000007FEFD3D4FFF 00025000
* pdh                            000007FEF90C0000 000007FEF910DFFF 0004e000
* SHLWAPI                        000007FEFDE50000 000007FEFDEC0FFF 00071000
* GDI32                          000007FEFE3A0000 000007FEFE406FFF 00067000
* USER32                         0000000077630000 0000000077729FFF 000fa000
* LPK                            000007FEFDE40000 000007FEFDE4DFFF 0000e000
* USP10                          000007FEFF970000 000007FEFFA38FFF 000c9000
* USERENV                        000007FEFC850000 000007FEFC86DFFF 0001e000
* profapi                        000007FEFD510000 000007FEFD51EFFF 0000f000
* WINMM                          000007FEFB320000 000007FEFB35AFFF 0003b000
* IPHLPAPI                       000007FEFAD70000 000007FEFAD96FFF 00027000
* NSI                            000007FEFDFB0000 000007FEFDFB7FFF 00008000
* WINNSI                         000007FEFAD60000 000007FEFAD6AFFF 0000b000
* opends60                       0000000071590000 0000000071597FFF 00008000
* NETAPI32                       000007FEFAEB0000 000007FEFAEC5FFF 00016000
* netutils                       000007FEFAEA0000 000007FEFAEABFFF 0000c000
* srvcli                         000007FEFD060000 000007FEFD082FFF 00023000
* wkscli                         000007FEFAE80000 000007FEFAE94FFF 00015000
* LOGONCLI                       000007FEFCB90000 000007FEFCBBFFFF 00030000
* SAMCLI                         000007FEFAE60000 000007FEFAE73FFF 00014000
* BatchParser                    0000000071560000 000000007158CFFF 0002d000
* IMM32                          000007FEFE060000 000007FEFE08DFFF 0002e000
* MSCTF                          000007FEFE1F0000 000007FEFE2F8FFF 00109000
* psapi                          00000000778F0000 00000000778F6FFF 00007000
* instapi10                      0000000071320000 000000007132CFFF 0000d000
* cscapi                         000007FEF7FA0000 000007FEF7FAEFFF 0000f000
* sqlevn70                       0000000071100000 0000000071303FFF 00204000
* CRYPTSP                        000007FEFCE50000 000007FEFCE66FFF 00017000
* rsaenh                         000007FEFCA70000 000007FEFCAB6FFF 00047000
* CRYPTBASE                      000007FEFD440000 000007FEFD44EFFF 0000f000
* BROWCLI                        000007FEF8B80000 000007FEF8B91FFF 00012000
* AUTHZ                          000007FEFCF70000 000007FEFCF9EFFF 0002f000
* MSCOREE                        000007FEF8980000 000007FEF89EEFFF 0006f000
* ole32                          000007FEFDC30000 000007FEFDE32FFF 00203000
* credssp                        000007FEFC960000 000007FEFC969FFF 0000a000
* msv1_0                         000007FEFCD90000 000007FEFCDE0FFF 00051000
* cryptdll                       000007FEFD090000 000007FEFD0A3FFF 00014000
* kerberos                       000007FEFCCD0000 000007FEFCD83FFF 000b4000
* MSASN1                         000007FEFD5B0000 000007FEFD5BEFFF 0000f000
* schannel                       000007FEFCB00000 000007FEFCB55FFF 00056000
* CRYPT32                        000007FEFD7D0000 000007FEFD939FFF 0016a000
* security                       0000000071390000 0000000071392FFF 00003000
* WS2_32                         000007FEFF360000 000007FEFF3ACFFF 0004d000
* SHELL32                        000007FEFE5D0000 000007FEFF357FFF 00d88000
* OLEAUT32                       000007FEFDED0000 000007FEFDFA6FFF 000d7000
* ncrypt                         000007FEFCF20000 000007FEFCF6CFFF 0004d000
* bcrypt                         000007FEFCEF0000 000007FEFCF11FFF 00022000
* mswsock                        000007FEFCDF0000 000007FEFCE44FFF 00055000
* wship6                         000007FEFCFB0000 000007FEFCFB6FFF 00007000
* wshtcpip                       000007FEFC720000 000007FEFC726FFF 00007000
* ntmarta                        000007FEFC620000 000007FEFC64CFFF 0002d000
* WLDAP32                        000007FEFE410000 000007FEFE461FFF 00052000
* ntdsapi                        000007FEF7AF0000 000007FEF7B16FFF 00027000
* bcryptprimitives               000007FEFC9D0000 000007FEFCA1BFFF 0004c000
* SAMLIB                         000007FEFBE10000 000007FEFBE2CFFF 0001d000
* CLBCatQ                        000007FEFD960000 000007FEFD9F8FFF 00099000
* sqlncli10                      0000000063720000 00000000639DCFFF 002bd000
* VERSION                        000007FEFC650000 000007FEFC65BFFF 0000c000
* COMCTL32                       000007FEFA110000 000007FEFA1AFFFF 000a0000
* COMDLG32                       000007FEFDFC0000 000007FEFE056FFF 00097000
* SQLNCLIR10                     00000000636E0000 0000000063716FFF 00037000
* netbios                        000007FEF4340000 000007FEF4349FFF 0000a000
* xpstar                         0000000063650000 00000000636D7FFF 00088000
* SQLSCM                         0000000063640000 000000006364DFFF 0000e000
* ODBC32                         000007FEF0AC0000 000007FEF0B70FFF 000b1000
* ATL80                          0000000063620000 000000006363FFFF 00020000
* odbcint                        00000000635E0000 0000000063617FFF 00038000
* clusapi                        000007FEF91B0000 000007FEF91FFFFF 00050000
* resutils                       000007FEF9190000 000007FEF91A8FFF 00019000
* xpstar                         00000000635B0000 00000000635D4FFF 00025000
* dbghelp                        0000000063330000 000000006348DFFF 0015e000
*     P1Home: 000000000BB6A950: 00000000C0000005 0000000000000000 0000000000886B00 0000000000000002 00000000
What else should I have to do?
Thank you,
Horia

A server error occurred on the current command. the results if any should be discarded in SQL 2008 R2

Hi,
I am using SQL server 2008 R2 and also MultipleActiveResultSet = true and Pooling = true (default value) in connection string.
While executing query 'IF ORIGINAL_LOGIN() = SUSER_SNAME() EXECUTE AS USER = 'MyUser'', I received error stating 'A server error occurred on the current command. the results if any should be discarded'. At the same time I could check that SqlConnection
state is also closed.
I have also fired 'REVERT' query If I find such exception and again try to execute same query again. but no luck. I received the same exception while executing query (Execute As) again.
What can be the solution to avoid such exception and make my code working?
Thanks,
Ashish

Login failed for user 'sa'. The user is not associated with a trusted SQL Server connection.
Above issue occurs genrally when authentication mode is set to Windows Authentication insted Mixed Mode.
You can change the authentication mode of the SQL server from “Windows Authentication Mode (Windows Authentication)” to “Mixed Mode (Windows Authentication and SQL Server Authentication)”.
Run following script in SQL Analyzer to change the authentication
LOGIN sa ENABLE
GO
ALTER LOGIN sa WITH PASSWORD = '<password>'
GO
http://blog.sqlauthority.com/2007/04/14/sql-server-fix-error-18452-login-failed-for-user-null-the-user-is-not-associated-with-a-trusted-sql-server-connection/
But as per the first post it seems issue is different have you observerd Error log?
Check out at C:\Program Files\Microsoft SQL Server\MSSQL.n\MSSQL\LOG\ERRORLOG
Location might differ as per the Server configration
Please click the Mark as answer button and vote as helpful if this reply solves your problem

A Servere Error Occured on the Current Command, The Result, If Any, should be discarded Message (10:17:1)

Hello
I am getting Following error when I predd add button. On this add button I do Bulk Copy insertion in some of tables.
I am using Linq to sql classes. At my side error is not comming. But at client side error is comming. They have more than 1 lac data. I am not getting why this kind of error occured?
So can anybody please tell me possible causes of this error?
If possible then can anybody sugest me any solution for it?
Thanking you in advance..
Regards
Vipul

So can you please analyse it & tell me the possible reasons for this kind of error..
Did you check the SQL Server error log? That might provide details as to the underlying cause of the error.
& also if possible then can you please send me basic solution that you can sugest me..
One method that might avoid the problem to insert in smaller batches line 10,000 rows. Use a separate data table for the SqlBulkCopy and perform the WriteToServer in a loop. Copy up to 10K rows from the source to target data table and
execute WriteToServer in each iteration.
A more robust method is to create your own DataReader that batches the rows. The original data table could be used as the source.
Dan Guzman, SQL Server MVP, http://www.dbdelta.com

ABAP Run time Error whle executing the Balance sheet report in FGI0

Hi,
I am getting the below ABAP Run time error while executing the Balance Sheet report in FGI0.It was working before but now it is giving the error.Kindly help me in solving this.
Runtime Errors         MESSAGE_TYPE_X
Date and Time          06/12/2009 15:17:17
Short text
     The current application triggered a termination with a short dump.
What happened?
     The current application program detected a situation which really
     should not occur. Therefore, a termination with a short dump was
     triggered on purpose by the key word MESSAGE (type X).
Error analysis
     Short text of error message:
     RAISE RKD_CONDITION_READ       (internal error)
     Long text of error message:
      Diagnosis
          The program was terminated because a situation occurred which
          should not have arisen.
      Procedure
          Analyze the situation and contact SAP.
     Technical information about the message:
     Message class....... "KH"
     Number.............. 299
     Variable 1.......... "RKD_CONDITION_READ"
     Variable 2.......... " "
     Variable 3.......... " "
     Variable 4.......... " "
Trigger Location of Runtime Error
    Program                                 SAPLKYPR
    Include                                 LKYPRU31
    Row                                     36
    Module type                             (FUNCTION)
    Module Name                             RKD_CONDITION_READ
Thanks
Supriya

Hello,
Please refer SAP
Note 971535 - dump when deleting characteristic with hierarchy
Regards,
Ravi

Install base API error Material Transaction errored prior to the current tr

All,
I wrote a script to update the install base installed date using API - csi_item_instance_pub.update_item_instance.
Script updated many successfully, but, for many I am getting following error:
You have Material Transaction_id (12169418) errored Prior to the Current Transaction. You need to process that first.
You have Material Transaction_id (12020011) errored Prior to the Current Transaction. You need to process that first.
I tried to reprocess using API again, but, it does update.
Does any one encountered this before ? What's causing this issue and resolution for same ? Is there any data issue, if so where ?
Thanks much

Nagmohan,
Thanks for quick update...
I found that progam you mentioned 'Install Base Error Correction and Synchronization Program' and ran that with options Show instances - Y, Mode - C, Force all data fix - Y.
I don't see any change what so ever in the csi_txn_errors. Though, I didn't ran the update API program.
For testing purposes, I took one inventory_item_id from the csi_txn_errors table to see how many errors it got.
Inventory_item_id = 304076
Found there are 123 rows for this items. processed_flag D-20 ; E-103 ;
I am enclosing few of data from the table here.
I understand from you that we need to clean these errors by some means, so, we need to look at each one in sequential order, then, try to resolve that to get to next one and so on until all the errors cleared. Also, is that business users needs to do something over here to fix these errors ? Or each one have it's own resolution ?
Why did Install Base error correction program did not fix the issues ? Is the program expected to fix the error by correcting the issue internally ?
Thanks much,
TRANSACTION_ERROR_ID MESSAGE_ID ERROR_TEXT PROCESSED_FLAG CREATION_DATE
1 12224 10818 Transaction prior to freeze_date in install parameter D 10/6/2007 8:10:40 PM
2 12227 10822 Transaction prior to freeze_date in install parameter D 10/6/2007 8:10:40 PM
3 12229 10828 Transaction prior to freeze_date in install parameter D 10/6/2007 8:10:40 PM
4 12230 10832 Serial control is now inappropriate for this txn. Knocking this D 10/6/2007 8:10:40 PM
5 12225 10820 Transaction prior to freeze_date in install parameter D 10/6/2007 8:10:40 PM
6 12226 10824 Transaction prior to freeze_date in install parameter D 10/6/2007 8:10:40 PM
7 12228 10826 Transaction prior to freeze_date in install parameter D 10/6/2007 8:10:40 PM
8 12231 10830 Serial control is now inappropriate for this txn. Knocking this D 10/6/2007 8:10:40 PM
9 12950 12718 Transaction prior to freeze_date in install parameter D 10/6/2007 8:11:23 PM
10 12952 12722 Transaction prior to freeze_date in install parameter D 10/6/2007 8:11:24 PM
11 12954 12726 Serial control is now inappropriate for this txn. Knocking this D 10/6/2007 8:11:24 PM
12 12947 12710 Transaction prior to freeze_date in install parameter D 10/6/2007 8:11:23 PM
13 12948 12714 Transaction prior to freeze_date in install parameter D 10/6/2007 8:11:23 PM
14 12949 12716 Transaction prior to freeze_date in install parameter D 10/6/2007 8:11:23 PM
15 12951 12720 Transaction prior to freeze_date in install parameter D 10/6/2007 8:11:24 PM
16 12953 12724 Transaction prior to freeze_date in install parameter D 10/6/2007 8:11:24 PM
17 13574 14556 Transaction prior to freeze_date in install parameter D 10/6/2007 8:11:58 PM
18 13575 14560 Transaction prior to freeze_date in install parameter D 10/6/2007 8:11:58 PM
19 13573 14554 Transaction prior to freeze_date in install parameter D 10/6/2007 8:11:58 PM
20 13576 14562 Serial control is now inappropriate for this txn. Knocking this D 10/6/2007 8:11:58 PM
21 144067 34168 Either sub type has change owner code as "E" ,so the external party_id: (47598 ) E 12/6/2007 7:02:11 PM
22 144133 34396 This customer item instance is currently in an Internal location INVENTORY and it is an Invalid location for the type of transaction being processed. E 12/8/2007 7:23:16 AM
23 145027 34578 You have Material Transaction_id (4844377) errored Prior to the Current Transaction. You need to process that first. E 12/10/2007 12:04:35 PM
24 168201 41858 You have Material Transaction_id (6048616) errored Prior to the Current Transaction. You need to process that first. E 1/30/2008 4:31:33 PM
25 168195 41840 You have Material Transaction_id (4869894) errored Prior to the Current Transaction. You need to process that first. E 1/30/2008 4:18:43 PM
26 169223 42238 You have Material Transaction_id (6048754) errored Prior to the Current Transaction. You need to process that first. E 2/1/2008 2:17:01 PM
27 169211 42162 You have Material Transaction_id (6048616) errored Prior to the Current Transaction. You need to process that first. E 2/1/2008 8:52:50 AM
28 170277 42680 You have Material Transaction_id (6072810) errored Prior to the Current Transaction. You need to process that first. E 2/5/2008 3:27:28 PM
29 190286 46872 You have Material Transaction_id (6075528) errored Prior to the Current Transaction. You need to process that first. E 3/6/2008 6:43:27 AM
30 190288 46876 The source item instance 304076, in Subinventory STAGE, for Organization 193 in Oracle Install Base does not exist. Please verify that any receipt transations were successful. (ITEM=304076) E 3/6/2008 6:49:20 AM
31 207309 50410 You have Material Transaction_id (6635323) errored Prior to the Current Transaction. You need to process that first. E 3/28/2008 11:12:24 AM
32 209320 51074 You have Material Transaction_id (7279930) errored Prior to the Current Transaction. You need to process that first. E 4/1/2008 11:44:27 AM
33 241414 57434 You have Material Transaction_id (6151851) errored Prior to the Current Transaction. You need to process that first. E 5/12/2008 4:05:12 PM
34 241435 57484 No instance is found for the inventory location attributes E 5/12/2008 7:01:04 PM
35 242428 57654 No instance is found for the inventory location attributes E 5/13/2008 7:00:39 PM
36 242419 57602 You have Material Transaction_id (7332482) errored Prior to the Current Transaction. You need to process that first. E 5/13/2008 2:44:11 PM
37 244522 58180 You have Material Transaction_id (8291855) errored Prior to the Current Transaction. You need to process that first. E 5/15/2008 7:00:52 PM
38 244499 58102 You have Material Transaction_id (6151851) errored Prior to the Current Transaction. You need to process that first. E 5/15/2008 1:42:11 PM
39 247465 60310 The source item instance 304076, in Subinventory UCORE, for Organization 193 in Oracle Install Base does not exist. Please verify that any receipt transations were successful. E 5/30/2008 10:48:36 AM
40 266432 81460 Invalid Instance Id Provided. The Item Instance ID (537385) provided is Either Expired or it does not exist in Installed Base Tables. E 9/19/2008 7:01:26 PM
41 275056 87920 "You have encountered an unexpected error in Call_to_Contracts, with error ORA-01403: no data found.
" E 10/22/2008 7:01:39 PM
42 275055 87918 "You have encountered an unexpected error in Call_to_Contracts, with error ORA-01403: no data found.
" E 10/22/2008 7:01:36 PM
43 276087 89296 "You have encountered an unexpected error in Call_to_Contracts, with error ORA-01403: no data found.
" E 10/30/2008 7:01:21 PM
44 276135 89564 "You have encountered an unexpected error in Call_to_Contracts, with error ORA-01403: no data found.
" E 10/31/2008 7:01:38 PM
45 276153 89618 "You have encountered an unexpected error in Call_to_Contracts, with error ORA-01403: no data found.
" E 11/3/2008 8:45:52 AM
46 276155 89622 You have Material Transaction_id (12743392) errored Prior to the Current Transaction. You need to process that first. E 11/3/2008 8:48:13 AM
47 276179 89690 "You have encountered an unexpected error in Call_to_Contracts, with error ORA-01403: no data found.
" E 11/3/2008 9:31:46 AM
48 276223 89868 You have Material Transaction_id (12743411) errored Prior to the Current Transaction. You need to process that first. E 11/3/2008 1:45:18 PM
49 276205 89772 You have Material Transaction_id (12743982) errored Prior to the Current Transaction. You need to process that first. E 11/3/2008 11:32:40 AM
50 276180 89694 You have Material Transaction_id (12743974) errored Prior to the Current Transaction. You need to process that first. E 11/3/2008 9:32:23 AM
51 276318 90432 "You have encountered an unexpected error in Call_to_Contracts, with error ORA-01403: no data found.
" E 11/5/2008 2:51:48 PM
52 276370 90758 No instance is found for the inventory location attributes E 11/6/2008 7:01:02 PM
53 276360 90686 You have Material Transaction_id (12744871) errored Prior to the Current Transaction. You need to process that first. E 11/6/2008 2:05:38 PM

Error While Executing the Asset history report S_ALR_87011990

Hi,
I am getting the below error while executing the Asset History Report - S_ALR_87011990
No data was selected
Message no. AB064
Kindly advice me

Hi,
Thi may be a authorisation issue. I doubt that it will get recorded in su53 for report executing. Check with basis guy for respective asset class authorization.

An error ocurred during the installation of assembly 'Microsoft. VC80.crt,type="win32", version="8.0.50727.4053".publickKeyToken="1fc8b3b9a1e18e3b".processorArchitectu re="amd64".Please refer to help and support for more information. HRESULT: 0x80071A30

An error ocurred during the installation of assembly 'Microsoft. VC80.crt,type="win32", version="8.0.50727.4053".publickKeyToken="1fc8b3b9a1e18e3b".processorArchitectu re="amd64".Please refer to help and support for more information. HRESULT: 0x80071A30
Instale iTunes perfectamente, conecte mi iPone y me dijo que necesitaba otra version que borrase la actual y instalase la nueva, borre la que tenia, y al instalar la nueva me salia esto y no tengo forma de instalarla. Ya hice los tutoriales de la pagina, y nada.

OK. If both of you are Windows 7. Make sure you go to Windows update (START button, type in Windows Update). Check for updates and update whatever that are available. (especially Microsoft .NET Framework 4 )
After that see if you still get this error message.
The last resort would be to unistall and reinstall the whole thing.
Follow the steps below:
1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
2. You should remove all instances of iTunes and the rest of the components listed below:
it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
Use the Control Panel to uninstall iTunes and related software components in the following order:
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch

Error ocurred in the derivation rule

Hi Guys
I am trying to create a sales order. But having this error
(error ocurred in the derivation rule) Msg no. K/111
How do I fix this please.
Thanks

Hi
The error desciption means that the issue is in the derivation rules for the source fields.
No entry in a derivation rule was found for the specified source fields.
The derivation rule was set up so that an error message appears when this happens.The required derivation rule entry would need the missing source fields.
Please click on the error message which should give you the missing source fields list. Maintain configuration in tcode KEDE and KEDR for the these fields and save,
Let me know if there are any issues. Hope this helps.
Karthik

Error during executing the tp command 'tp Connect DEV...

Dear All,
   There is error when I SPAM support package SAPKB70010.(SAP ECC6.0)
   Info:
   Import phase 'CHECK_REQUIREMENTSS'
   \HOSTNAME\SAPMNT\trans\bin\TPPARAM
   Error during executing the tp command 'tp connect DEV...'
   TP return cod:'0208', tp message:'error in transportprofil (param missing,unknow..'tp output
   sapmnt\trans\bin\TPPARAM could not be opened.
EXIT
ERROR:
System: Parameter SAPEVTPATH not set. Batch jobs cannot be started.
Error in
hostname\sapmnt\trans\bin\TPPARAM: transdir not set.
tp return code Summary:
TOOLS:Hightest return code of single steps was:0
ERRORS: Highest tp internal error was:0208
My environment:
Win2003 X64
Oracle 10.2
SAP ECC 6.0 Basis 700 09
Kernel patch num:254
How to solve the issue?
Thank you very much!

Hi
2 possible problems.
1) tp is using the wrong profile
2) the profile is not complete
For 1, specify the profile when using the tp command e.g. tp connect dr1
pf='/usr/sap/trans/DR1/bin/TPPARAM'
For 2 you need to edit the TPPARAM file and insert the correct values e.g.
DR1/sapevtpath = /usr/sap/$(system)/SYS/exe/run/sapevt or you can add
it into the command line with the -D option
At the command prompt enter 'tp connect' and the help file will be
displayed for that command with the available options
Cheers
Nirav Kundaria

An error ocurred during the installation of assambly

trying to install the new itune have the older one just got the 4S but cant use it on my curent itune have an error ocurred during the installation of assambly it what it says and then back tracks and stops

These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? (For example, 8007000B.)

Severe Error Ocurred on the Current Command REPORT BUILDER SSRS 2008

Similar Messages

Maybe you are looking for