Severe error(s) occured in phase PREP_INPUT/KX_CPYORG!

We are installing the EHP4 on a ERP 6.0 EHP4 ready ABAP system. ( MSCS
Installation)
We are using SAP EHP INSTALLER 7.00 .( latest version)
However , while in extraction phase we are getting following
error "evere error(s) occured in phase PREP_INPUT/KX_CPYORG!
Last error code set: Failed to copy 1 files, check 'KX_CPYORG.LOG' for
details"
We have checked that user SIDADM user has full rights over the
directory "
SAPGCP\sapmnt\GCP\SYS\exe\uc\NTAMD64"
Please advice where to look for errors and how to resolve them. Just an information i DID NOT stopped any services on both of nodes , as its an MSCS installation and i am running ehpi tool at server on which CI was installed and running the tool from CI /usr/sap/sid/ehpi directory.
There is no error in KX_CPYORG.log file .
2 ETQ399 Reading list file '
SAPGCP\sapmnt\GCP\SYS\exe\uc\NTAMD64\dbatoolsora.lst'
3 ETQ399 Copying file 'dbatoolsora.lst'.
3 ETQ399 Copying file 'dbatoolsora.mf'.
3 ETQ399 Copying file 'brarchive.exe'.
3 ETQ399 Copying file 'brbackup.exe'.
3 ETQ399 Copying file 'brconnect.exe'.
3 ETQ399 Copying file 'brrecover.exe'.
3 ETQ399 Copying file 'brrestore.exe'.
3 ETQ399 Copying file 'brspace.exe'.
3 ETQ399 Copying file 'brtools.exe'.
3 ETQ399 Copying file 'libsbt.dll'.
3 ETQ399 Copying file 'initSID.sap'.
3 ETQ399 Copying file 'sapconn_role.sql'.
3 ETQ399 Copying file 'sapdba_role.sql'.
3 ETQ399 Copying file 'ntenv2reg.exe'.
3 ETQ399 Copying file 'ARCHIVE_OFF.BAT'.
3 ETQ399 Copying file 'ARCHIVE_ON.BAT'.
3 ETQ399 Copying file 'ARCHIVE_TST.BAT'.
3 ETQ399 Copying file 'strdbs.cmd'.
3 ETQ399 Copying file 'CPIO.EXE'.
3 ETQ399 Copying file 'DD.EXE'.
3 ETQ399 Copying file 'MT.EXE'.
3 ETQ399 Copying file 'MKSZIP.EXE'.
3 ETQ399 Copying file 'UNCOMPRESS.EXE'.
1 ETQ399 Copied 915 files.
1EETQ399 Failed to copy 1 files.
Please advice
Regards
Edited by: Tech GCCIA on Oct 14, 2010 1:52 PM

In my case, it cannot overwrite some files, i could found it in the log.
See :
3EETQ399 Cannot write to '/usr/sap/TDD/SUM/abap/exe/libicudata50.a': Text file busy
3 ETQ399 Copying file 'libicui18n40.a'.
3 ETQ399 Copying file 'libicui18n50.a'.
3EETQ399 Cannot write to '/usr/sap/TDD/SUM/abap/exe/libicui18n50.a': Text file busy
3 ETQ399 Copying file 'libicuuc40.a'.
3 ETQ399 Copying file 'libicuuc50.a'.
3EETQ399 Cannot write to '/usr/sap/TDD/SUM/abap/exe/libicuuc50.a': Text file busy
I've just renamed these files for _bkp and runned again.
It works!
Thanks and I hope help you !!!
regards,
Eddie

Similar Messages

  • EHP6 - Severe error(s) occurred in phase PREP_INPUT/KX_CPYORG!

    Hi All,
    We are at the "extraction" stage of our EHP6 upgrade for pre-prod system, this serves as rehearsal for the execution of the same upgrade in production system.
    However, SUM is stopped due to below error.
    SUM - EXTRACTION phase stops at PREP_INPUT/KX_CPYORG, showing the error message below:
    Severe error occurred in phase PREP_INPUT/KX_CPYORG!
    Last error code set is: Failed to copy 1 files, check 'KX_CPYORG.LOG' for details
    And checking from log, it shows "4EETQ399 Source file 'exe_syb.lst' missing!". This file doesn't exist anywhere in the system. Also, checking from logs of previous EHP6 upgrade in our DEV and QAS systems, this file doesn't exist. And instead of "exe_syb.lst", what has been copied from previous upgrades is 'exe_db6.lst'. We are at HP-UX and DB6.
    Logs:
    4EETQ399 Source file 'exe_syb.lst' missing!
    1 ETQ399 Copied 821 files.
    1EETQ399 Last error code set is: Failed to copy 1 files, check 'KX_CPYORG.LOG' for details
    1EETQ204 Upgrade phase "KX_CPYORG" aborted with severe errors ("20140721180154")
    Please advise how to fix.
    Regards,
    Philip

    HI,
    Kindly share 'KX_CPYORG.LOG files for analysis.Meanwhile try to patch the kernel with latest available at SMP and recheck for permissions and ownerships under kernel directory.
    Regards,
    Gaurav

  • Severe error(s) occurred in phase PREP_INPUT/SUMCHK!

    Hi ,
    while performing the EHP7 upgrade during the extraction phase I faced below error.
    Severe error(s) occurred in phase PREP_INPUT/SUMCHK!
    Last error code set: tp failed with return code 232, check G:\SUM\abap\log\TPSQLSTD.OUT
    I have tried implementing the below parameter disp+work is stopped
    Env variable rsdb_ssfs_connect = 1
    rsdb/ssfs_connect = 0
    I have attached the TPSQLSTD log file below,Kindly share your inputs to fix above error.

    Hi Krishan,
    Have a close look with logs
    SAPup> Starting subprocess in phase 'SUMCHK' at 20140727092403
        ENV: DBMS_TYPE=ora
        ENV: NLS_LANG=AMERICAN_AMERICA.UTF8
        ENV: ORACLE_HOME=C:\oracle\QEC\11203
        ENV: ORACLE_SID=QEC
        ENV: PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC
        ENV: PATH=D:\usr\sap\QEC\DVEBMGS00\exe;C:\oracle\QEC\11203\bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;D:\usr\sap\QEC\SYS\exe\uc\NTAMD64
        ENV: SAPDATA_HOME=F:\ORACLE\QEC
        ENV: SAPSYSTEMNAME=QEC
        ENV: dbs_ora_schema=SAPSR3
        ENV: dbs_ora_tnsname=QEC
        ENV: rsdb_ssfs_connect=1
    EXECUTING D:\usr\sap\QEC\DVEBMGS00\exe\tp.EXE  "pf=J:\SUM\abap\var\DEFAULT.TPP" execdbscript QEC -x ..\var\SMODILOGCHECK.XQL
    This is D:\usr\sap\QEC\DVEBMGS00\exe\tp.EXE version 380.04.07 (release 720, unicode enabled)
    TRACE-INFO: 1:  [     dev trc,00000]  Sun Jul 27 09:24:03 2014                                                         2967  0.002967
    TRACE-INFO: 2:  [     dev trc,00000]  DlLoadLib success: LoadLibrary("dboraslib.dll"), hdl 0, addr 000007FEE71F0000
    TRACE-INFO: 3:                                                                                                           19  0.002986
    TRACE-INFO: 4:  [     dev trc,00000]      using "D:\usr\sap\QEC\DVEBMGS00\exe\dboraslib.dll"                              8  0.002994
    TRACE-INFO: 5:  [     dev trc,00000]  -->DbSlControl(con=-1,cmd=47=DBSL_CMD_IMP_FUNS_SET) -> changed=30, tagset=1       350  0.003344
    TRACE-INFO: 6:  [     dev trc,00000]  -->DbSlControl(con=-1,cmd=39=DBSL_CMD_SET_SINGLETASK)                              13  0.003357
    TRACE-INFO: 7:  [     dev trc,00000]  -->DbSlControl(con=-1,cmd=10=DBSL_CMD_DBCA_PTR_GET)                                11  0.003368
    TRACE-INFO: 8:  [     dev trc,00000]  -->DbSlControl(con=-1,cmd=10=DBSL_CMD_DBCA_PTR_GET)                                12  0.003380
    TRACE-INFO: 9:  [     dev trc,00000]  -->DbSlControl(con=-1,cmd=74=DBSL_CMD_CON_INFO_EXT_SUPPORT) -> rc=0=DBSL_ERR_OK, con_vers=0
    TRACE-INFO: 10:                                                                                                           36  0.003416
    As you are using kernel release 720.Parameter rsdb_ssfs_connect =1 will play role if you'll use kernel release higher than current.For use of SSFS try to upgrade kernel with the latest 740 or 741 and retry the phase again.
    Regards,
    Gaurav

  • Severe error(s) occured in phase MAIN_INIT/UCMIG_STATUS_CHK!

    Dear team,
    We have started Upgrading our existing SAP R/3 x200 system ( Windows 6.1 & oracle 10.2.0.5) to ECC 6.0 EHP5.
    All the processes upto 'check' completed without error.
    In preprocessing phase we got stuck at phase "MAIN_INIT/UCMIG_STATUS_CHK!" ( As shown bellow).
    Severe error(s) occured in phase MAIN_INIT/UCMIG_STATUS_CHK!
    Last error code set: The Unicode Conversion Preparations on the startrelease (transaction SPUMG) have not been finished, procedure cannot continue
    Trouble Ticket Generation
    A trouble ticket and an archive with all relevant log files have been generated. Trouble ticket: "D:\usr\sap\SND\upg\abap\log\SAPup_troubleticket.log" Log archive: "D:\usr\sap\SND\upg\abap\log\SAPup_troubleticket_logs.sar"
    We have manually done SPUMG as per note 1051576 (Our system is single code page system)
    But error still exist.. Kindly guide.
    Regards,
    Vishal

    Hello Vishal,
    Are you doing non-unicode R/3 x200 to unicode ECC 6.0 EHP5 upgrade? If yes, please go through CUUC upgrade document for pre-requisites.
    Please take a look at below threads. It can help you.
    CUUC - SPUMG Related Quary
    http://www.saptechies.com/combined-upgrade-unicode-conversion-cuuc-faq/
    Thanks,
    Siva Kumar
    Edited by: Siva Kumar Arivinti on Dec 9, 2011 7:36 PM

  • Severe error(s) occurred in phase PREP_INSTALL/SHDINST_OS Last error code set: Process H:\SUM\abap\exe/sapstartsrv.exe exited with -1

    Hi Experts ,
    Currently performing EHP7 upgrade I have faced error during the configuration phase , below attached was the error screenshot .
    error logs shows the below :
    Executing module 'PREP_INSTALL'.
    Execution of PREPARE module "Installation" begins at 20140302202456
    # Starting phase execution with maxpar = 6, scheduled: 14x'-'
    CURRENTPHASE PREP_INSTALL/SHDINST_OS
    ...started at 20140302202456
    # Using phase log file 'SHDINST_OS.LOG'.
    ..finished at 20140302202457 with status ABORTED.
    # Error message set: 'Process H:\SUM\abap\exe/sapstartsrv.exe exited with -1, see 'H:\SUM\abap\log\SAPup.ECO' for details'
    .begin dialog at 20140302202459
    SHDINST_OS log :
    1 ETQ399 Possibly the password for user ISNET\SAPServiceDEC entered in phase
    1 ETQ399 INITPUT was wrong. You can reset it by calling 'SAPup set stdpar'.
    1 ETQ399 Try to execute SAPSTARTSRV.EXE manually using the following syntax:
    1 ETQ399 H:\SUM\abap\exe\sapstartsrv.exe -r
    1 ETQ399 -p H:\SUM\abap\DEC\SYS\profile\START_DVEBMGS01_SAPECCDV -s DEC -n 01
    1 ETQ399 -U ISNET\SAPServiceDEC -P <PASSWORD> -e ISNET\decadm
    1 ETQ399 and check if the service SAPDEC_01 can be stopped and restarted.
    1EETQ399 Last error code set is: Process H:\SUM\abap\exe/sapstartsrv.exe exited with -1, see 'H:\SUM\abap\log\SAPup.ECO' for details
    1EETQ204 Upgrade phase "SHDINST_OS" aborted with severe errors ("20140302202457")
    Kindly advice to fix

    Hi Mohan,
    Solution of your issue is already present in SHDINST_OS.LOG
    Possibly the password for user ISNET\SAPServiceDEC entered in phase
    1 ETQ399 INITPUT was wrong. You can reset it by calling 'SAPup set stdpar'.
    1 ETQ399 Try to execute SAPSTARTSRV.EXE manually using the following syntax:
    1 ETQ399 H:\SUM\abap\exe\sapstartsrv.exe -r
    1 ETQ399 -p H:\SUM\abap\DEC\SYS\profile\START_DVEBMGS01_SAPECCDV -s DEC -n 01
    1 ETQ399 -U ISNET\SAPServiceDEC -P <PASSWORD> -e ISNET\decadm
    1 ETQ399 and check if the service SAPDEC_01 can be stopped and restarted.
    Read the log carefully.Have you performed the above mentioned steps from SHDINST_OS.LOG file at your end.
    Also just give a full restart your server,up all the required services & confirm the execution of the phase.
    Thanks,
    Gaurav

  • SUM : Severe error(s) occurred in phase PREP_INSTALL/SHDINST_OS!

    Hi,
    I am currently upgrading my system from EHP6 to EHP 7 using Sofware Update Manager (SUM) version 10
    During the phase SHDINST_OS I am facing an issue with the following message :
    Cannot grant service start/stop permissions.
    SetEntriesInAcl failed: 534
    No mapping between account names and security IDs was done.
    This message is generated by the following command which is executed at this step :
    D:\usr\sap\SUM\abap\exe\sapstartsrv.exe -r -q -p D:\usr\sap\SUM\abap\system\<SID>\SYS\profile\START_DVEBMGS04 -s <SID> -n 04 -U .\SAPService<SID> -P <HIDDEN> -e SAP\<SID>adm
    After investigating, I realized that the user ".\SAPService<SID>" used in the command should be the domain one and so in this case SAP\SAPService<SID>.
    Do you know how I can force SUM to use the domain user SAP/SAPService<SID>instead of .\SAPService<SID>?
    Thanks in advance for your help.
    Chris

    Hi Divyanshu
    As mentioned in the log file SHDINST_OS.log I executed the following command in a command prompt
    1 ETQ399 Try to execute SAPSTARTSRV.EXE manually using the following syntax:
    1 ETQ399 D:\usr\sap\SUM\abap\exe\sapstartsrv.exe -r
    1 ETQ399 -p D:\usr\sap\SUM\abap\system\PE2\SYS\profile\START_DVEBMGS04  -s PE2 -n 04
    1 ETQ399 -U .\SAPServicePE2 -P <PASSWORD> -e SAP\pe2adm
    1 ETQ399 and check if the service SAPPE2_04 can be stopped and restarted.
    This command shows the GUI of SAPSTARTSRV.EXE with all the parameters filled in and after modifying the user .\SAPServicePE2 with the one from my domain ‘SAP’ => SAP\ SAPServicePE2. The system display a popup with the following message “Service Successfully installed”
    Regards,
    Christophe

  • Error occurred in phase PREP_INPUT/EXTRACTKRN_PRE

    Hi All,
    I am upgrading Solution Manager to 7.1 from solution Manager 7.0 EHP1. Operating system Windows Server 2003 and database Oracle 11.2.
    During the extraction phase (Extract Kernel) the following error occurred :
    Sever error(s) occurred in phase PREP_INPUT/EXTRACTKRN_PRE!
    Last error code set:Attribute 'nargs' not found in tag 'media'
    I have checked the SAP_up_troubleticket.log file and found the same errors as mentioned above.
    SAPup broke during phase EXTRACTKRN_PRE in module PREP_INPUT
    / Parameter input
    Error Message: Attribute 'nargs' not found in tag 'media'
    If someone had encountered the same problem then found the fix, can you please share the same.
    Thanks in advance .
    Harry

    I truncated to short path but did not work. I will try again.
    I tried to attached zip files but got same message again.
    Regards,
    Harry
    The MIDService file is not a very big. Please find the contents of the file MISDservice.log files are given below.
    May 14, 2014 4:29:10 PM [Info]: Starting service "MIDService" ...
    May 14, 2014 4:29:10 PM [Info]: Starting service "MIDService" ...
    May 14, 2014 4:29:10 PM [Info]: Reading scope from storage.
    May 14, 2014 4:29:10 PM [Info]: No scope in storage - creating initial scope.
    May 14, 2014 4:29:10 PM [Info]: Service "MIDService" started.
    May 14, 2014 4:29:10 PM [Info]: Service "MIDService" started.
    May 14, 2014 4:29:10 PM [Info]: Setting Kit ID to <null>
    May 14, 2014 5:02:59 PM [Info]: Attaching "D:\SOLMAN71\51042608" ...
    May 14, 2014 5:02:59 PM [Info]: Attached "D:\SOLMAN71\51042608"" with ID 88d5b6c2-4b5b-11e1-a27e-005056a204ff.
    May 14, 2014 5:02:59 PM [Info]: Updating storage ...
    May 14, 2014 5:02:59 PM [Info]: Storage updated.
    May 14, 2014 5:02:59 PM [Info]: Attaching "D:\SOLMAN71\51042609" ...
    May 14, 2014 5:02:59 PM [Info]: Attached "D:\SOLMAN71\51042609"" with ID 0c59c310-5e1c-11e1-b8b0-005056a204ff.
    May 14, 2014 5:02:59 PM [Warning]: inconsistent logical item
    May 14, 2014 5:02:59 PM [Info]: Updating storage ...
    May 14, 2014 5:02:59 PM [Info]: Storage updated.
    May 14, 2014 5:02:59 PM [Info]: Attaching "D:\SOLMAN71\51042610_1" ...
    May 14, 2014 5:02:59 PM [Info]: Attached "D:\SOLMAN71\51042610_1"" with ID c1d91112-4cdc-11e1-ca6c-005056a204ff.
    May 14, 2014 5:02:59 PM [Warning]: inconsistent logical item
    May 14, 2014 5:02:59 PM [Warning]: inconsistent logical item
    May 14, 2014 5:02:59 PM [Info]: Updating storage ...
    May 14, 2014 5:02:59 PM [Info]: Storage updated.
    May 14, 2014 5:02:59 PM [Info]: Attaching "D:\SOLMAN71\51042610_2" ...
    May 14, 2014 5:03:00 PM [Info]: Attached "D:\SOLMAN71\51042610_2"" with ID c1d91114-4cdc-11e1-98be-005056a204ff.
    May 14, 2014 5:03:00 PM [Warning]: inconsistent logical item
    May 14, 2014 5:03:00 PM [Warning]: inconsistent logical item
    May 14, 2014 5:03:00 PM [Warning]: inconsistent logical item
    May 14, 2014 5:03:00 PM [Info]: Updating storage ...
    May 14, 2014 5:03:00 PM [Info]: Storage updated.
    May 14, 2014 5:03:00 PM [Info]: Attaching "D:\SOLMAN71\51042610_3" ...
    May 14, 2014 5:03:00 PM [Info]: Attached "D:\SOLMAN71\51042610_3"" with ID c1d91116-4cdc-11e1-a11e-005056a204ff.
    May 14, 2014 5:03:00 PM [Warning]: inconsistent logical item
    May 14, 2014 5:03:00 PM [Warning]: inconsistent logical item
    May 14, 2014 5:03:00 PM [Warning]: inconsistent logical item
    May 14, 2014 5:03:00 PM [Warning]: inconsistent logical item
    May 14, 2014 5:03:00 PM [Info]: Updating storage ...
    May 14, 2014 5:03:00 PM [Info]: Storage updated.
    May 14, 2014 5:03:00 PM [Info]: Attaching "D:\SOLMAN71\SOLMAN_7_1_SR1_Krnl_Windows__OS_400_" ...
    May 14, 2014 5:03:00 PM [Info]: Attached "D:\SOLMAN71\SOLMAN_7_1_SR1_Krnl_Windows__OS_400_"" with ID 7598c6a0-53b8-11e1-831b-005056a204ff.
    May 14, 2014 5:03:00 PM [Warning]: inconsistent logical item
    May 14, 2014 5:03:00 PM [Warning]: inconsistent logical item
    May 14, 2014 5:03:00 PM [Warning]: inconsistent logical item
    May 14, 2014 5:03:00 PM [Warning]: inconsistent logical item
    May 14, 2014 5:03:00 PM [Warning]: inconsistent logical item
    May 14, 2014 5:03:00 PM [Info]: Updating storage ...
    May 14, 2014 5:03:00 PM [Info]: Storage updated.
    May 14, 2014 5:24:14 PM [Info]: Locating Data Unit with Kit ID d52484b0-0548-11e1-a98b-005056a204ff ...
    May 14, 2014 5:24:14 PM [Info]: Attributes:
    May 14, 2014 5:24:14 PM [Info]: osname=WINDOWS_X86_64
    May 14, 2014 5:24:14 PM [Info]: unicode=true
    May 14, 2014 5:24:14 PM [Info]: type=KERNEL
    May 14, 2014 5:24:14 PM [Info]: Matching item ID d29f9450-15ab-11e1-8d45-005056a204ff
    May 14, 2014 5:24:14 PM [Info]: Data Unit located under path D:\SOLMAN71\SOLMAN_7_1_SR1_Krnl_Windows__OS_400_\.\DATA_UNITS\K_720_U_WINDOWS_X86_64.

  • EhP4-Upgrade: error in phase PREP_INPUT/KX_CPYORG

    Hi!
    I try to execute a EHP4 upgrade for SAP ECC system with EhP Installer.
    The programm stopps after several repeat attempts in the the phase PREP_INPUT/KX_CPYORG.
    The error I get is:
    CURRENTPHASE PREP_INPUT/KX_CPYORG
    ...started at 20090320163915
    Using phase log file 'KX_CPYORG.LOG'.
    Kernel is replicated from D:\usr\sap\GE6\SYS\exe\nuc\NTAMD64.
    Error message set: 'File 'D:\usr\sap\GE6\SYS\exe\nuc\NTAMD64\##f' does not exist: The system cannot find the file specified.
    ...begin dialogue at 20090320164430
    How can I solve this problem?
    Thank you very much!
    regards
    Ju00FCrgen

    Hi
    Don't know if it is still relevant (or even the same issue) but I had a similar problem with a file ##f not found directly after a mention of "reading dbclient.lst" in the log, and I fixed it by opening dbclient.lst in notepad and saving it again as ANSI. The original was Unicode and I noticed some other .lst file was ANSI. Hope this helps.
    Best regards
    Mischa

  • EHP4 Installation: Error in Phase PREP_INPUT/KX_CPYORG

    Hi!
    I try to execute a EHP4 installation for SAP ECC system with EhP Installer.
    The programm stopps after several repeat attempts in the the phase PREP_INPUT/KX_CPYORG.
    The error I get is:
    CURRENTPHASE PREP_INPUT/KX_CPYORG
    ...started at 20090320163915
    Using phase log file 'KX_CPYORG.LOG'.
    Kernel is replicated from D:\usr\sap\GE6\SYS\exe\nuc\NTAMD64.
    Error message set: 'File 'D:\usr\sap\GE6\SYS\exe\nuc\NTAMD64\##f' does not exist: The system cannot find the file specified.
    ...begin dialogue at 20090320164430
    How can I solve this problem?
    Thank you very much!
    regards
    Ju00FCrgen

    Hi,
    Iam in the process of installing EHP-4, i am unable to find the dowload locations for EHP-4.
    Can anyone help me in downloading these packages for ECC6.0. Currently i dont have Solution Manager 7.0 to download these packages from Maintenance Optimizer.
    Thanx,
    SBS Administrator.

  • EHP5 Installation: Error in Phase PREP_INPUT/KX_CPYORG

    Hi there,
    happy new to year to all of you
    I have a problem with the EHPI (latest version). In Phase "PREP_INPUT/KX_CPYORG"  i get the following error:
    KX_CPYORG.LOG:
    1 ETQ200 Executing actual phase 'PREP_INPUT/KX_CPYORG'.
    1 ETQ399 Source directory: D:\usr\sap\BIL\SYS\exe\nuc\NTAMD64
    1 ETQ399 optional list file 'dbclient.lst' not found at directory 'D:\usr\sap\BIL\SYS\exe\nuc\NTAMD64' - copy files skipped
    1 ETQ399 optional list file 'igsexe.lst' not found at directory 'D:\usr\sap\BIL\SYS\exe\nuc\NTAMD64' - copy files skipped
    1 ETQ399 optional list file 'sapcrypto.lst' not found at directory 'D:\usr\sap\BIL\SYS\exe\nuc\NTAMD64' - copy files skipped
    1 ETQ399 Using copy list: instance.lst
    1 ETQ399 Using copy list: instancedb.lst
    1 ETQ399 Copying files from 'D:\usr\sap\BIL\SYS\exe\nuc\NTAMD64' to 'D:\usr\sap\EHPI\abap\exe'
    2 ETQ399 Reading list file 'D:\usr\sap\BIL\SYS\exe\nuc\NTAMD64\instance.lst'
    The problem here is its an unicode System - ever was! and there is no path D:\usr\sap\BIL\SYS\exe\ nuc \NTAMD64 but a D:\usr\sap\BIL\SYS\exe\ uc \NTAMD64
    The Systems' profile parameter OS_UNICODE says: "uc". DIR_CT_RUN says "D:\usr\sap\BIL\SYS\exe\uc\NTAMD64"
    So why does the EHPI think this is a Non-Unicode system?
    Any ideas?
    regards,
    Markus

    When i check the files "BIL_DVEBMGS00_BILBO.PPR" and "START_DVEBMGS00_BILBO.PPR" from the EHPI directory D:\usr\sap\EHPI\abap\log\ i do find entries like
    2 DIR_CT_RUN                     User:                                SAP: D:\usr\sap\BIL\SYS\exe\nuc\NTAMD64
    and
    2 OS_UNICODE                     User:                                SAP: nuc
    But the question remains. Where does it take these ones from? The System profiles do not refer to "nuc" anywhere but always to "uc".

  • Error in start of phase PREP_INPUT/PROFREAD

    Hi Team,
    We are facing the follwing error while 'RESET PREPARE' and it is not accepting the DDIC and SAPServiceER4 password also...
    >> 2009/09/29 18:31:04  START OF PHASE PREP_INPUT/PROFREAD
    >>>> Passwords <<<<
    Enter the password for SAP user DDIC in client 000:
    DDIC PASSWORD [***********]: ***********
    Enter the password for the operating system account .\SAPServiceER4:
    OS PASSWORD [***********]: ***********
    ERROR: DDIC password does not work: RFC call to  failed with key RFC_E
    NICATION (open): SAP_CMINIT3 : rc=20 > Connect to SAP gateway failed
    Connect_PM  DEST=ER4, GWHOST=hydhtc100381d, GWSERV=sapgw00, SYSNR=00
    LOCATION    CPIC (TCP/IP) on local host with Unicode
    ERROR       partner 'hydhtc100381d:3300' not reached
    TIME        Tue Sep 29 18:31:38 200
    RELEASE     710
    COMPONENT   NI (network interface)
    VERSION     39
    RC          -10
    MODULE      nixxi.cpp
    LINE        3143
    DETAIL      NiPConnect2: 10.136.175.23:3300
    SYSTEM CALL connect
    ERRNO       10060
    ERRNO TEXT  WSAETIMEDOUT: Connection timed o.
    Please suggest the solution...
    Also please let me know that for upgrading ECC 6.0 can we use EHP Installer version more than 7.0 ?
    Waiting for your response...
    Vibhor

    Hi Vibhor,
    In resetting of upgrade you don't need DDIC user and sapservice<sid> password.
    You can reset upgrade by using below command:
    Change to the EHPI/abap/bin directory (Windows: EHPI\abap\bin)
    Enter the following command:
    ./SAPehpi reset prepare (Windows: .\SAPehpi.exe reset prepare)
    Delete the EHPI directory.
    Start SAPehpi again.
    Also, In order to upgrade ERP to EHP4 you cannot use EHPI of version higher than 7.0.
    Thanks
    Sunny

  • Unexpected severe error has occured in Jdeveloper

    Hello everyone,
    today i installed Oracle Jdeveloper 11.1.1.7. I tested o create some Java & HTML Applications and it worked.  After i had installed the BPM-Studio Extension,i tested the creation of BPM-Projects. Every creation of a BPM-Process was followed by a error warning. For Instance:
    Performing action Delete[ from oracle.ide.navigator.ProjectNavigatorWindow ]
    Invoking command: [ from oracle.ide.navigator.ProjectNavigatorWindow ]
    Started CommandProcessor transaction: Delete TestProcess.bpmn on thread AWT-EventQueue-0 at batch level 1
    Finished CommandProcessor transaction on thread AWT-EventQueue-0 at batch level 0
    Performing action Delete Application[ from oracle.ide.navigator.ApplicationNavigatorWindow ]
    Performing action Delete Application[ from oracle.ide.navigator.ApplicationNavigatorWindow ]
    Invoking command: [ from oracle.ide.navigator.ApplicationNavigatorWindow ]
    Performing action Exclude Project Content[ from oracle.ide.navigator.ApplicationNavigatorWindow ]
    Invoking command: [ from oracle.ide.navigator.ApplicationNavigatorWindow ]
    Performing action Run[ from oracle.ide.navigator.ProjectNavigatorWindow ]
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Performing action Save[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: [ from oracle.ide.ceditor.CodeEditor ]
    Started CommandProcessor transaction: Auto Save Actions on thread AWT-EventQueue-0 at batch level 1
    Finished CommandProcessor transaction on thread AWT-EventQueue-0 at batch level 0
    Performing action Run[ from oracle.ide.navigator.ProjectNavigatorWindow ]
    Performing action New...[ from oracle.ide.runner.RunLogPage ]
    Performing action Show Overview
    Performing action Process[ from oracle.bpm.fusion.studio.navigator.ProjectNavigatorWindow ]
    Invoking command: Move End
    Invoking command: Changes in Buch entnehmen
    Invoking command: Add Activity
    Invoking command: Move End
    Invoking command: Changes in Buch zur Theke bringen
    Invoking command: Add Activity
    Performing action Save[ from oracle.bpm.fusion.studio.editor.ProcessEditor ]
    Invoking command: [ from oracle.bpm.fusion.studio.editor.ProcessEditor ]
    Invoking command: [ from oracle.bpm.fusion.studio.editor.ProcessEditor ]
    Uncaught exception
    java.lang.NullPointerException
      net.miginfocom.layout.Grid.addLinkIDs()
      net.miginfocom.layout.Grid.<init>()
      net.miginfocom.swing.MigLayout.checkCache()
      net.miginfocom.swing.MigLayout.getSizeImpl()
      net.miginfocom.swing.MigLayout.preferredLayoutSize()
      o.bpm.ui.layout.MigLayout.preferredLayoutSize(MigLayout.java:114)
      j.a.Container.preferredSize(Container.java:1788)
      j.a.Container.getPreferredSize(Container.java:1773)
      jx.s.JComponent.getPreferredSize(JComponent.java:1662)
      o.ii.editor.SplitPane.doLayoutBottomTabs(SplitPane.java:536)
      o.ii.editor.SplitPane.doLayout(SplitPane.java:522)
      j.a.Container.validateTree(Container.java:1688)
      j.a.Container.validateTree(Container.java:1697)
      j.a.Container.validateTree(Container.java:1697)
      j.a.Container.validateTree(Container.java:1697)
      j.a.Container.validateTree(Container.java:1697)
      j.a.Container.validateTree(Container.java:1697)
      j.a.Container.validateTree(Container.java:1697)
      j.a.Container.validateTree(Container.java:1697)
      j.a.Container.validateTree(Container.java:1697)
      j.a.Container.validateTree(Container.java:1697)
      j.a.Container.validate(Container.java:1623)
      jx.s.RepaintManager$2.run(RepaintManager.java:691)
      jx.s.RepaintManager$2.run(RepaintManager.java:689)
      j.security.AccessController.doPrivileged(Native Method)
      j.security.ProtectionDomain$1.doIntersectionPrivilege(ProtectionDomain.java:76)
      jx.s.RepaintManager.validateInvalidComponents(RepaintManager.java:688)
      jx.s.RepaintManager$ProcessingRunnable.run(RepaintManager.java:1676)
      j.a.event.InvocationEvent.dispatch(InvocationEvent.java:251)
      j.a.EventQueue.dispatchEventImpl(EventQueue.java:733)
      j.a.EventQueue.access$200(EventQueue.java:103)
      j.a.EventQueue$3.run(EventQueue.java:694)
      j.a.EventQueue$3.run(EventQueue.java:692)
      j.security.AccessController.doPrivileged(Native Method)
      j.security.ProtectionDomain$1.doIntersectionPrivilege(ProtectionDomain.java:76)
      j.a.EventQueue.dispatchEvent(EventQueue.java:703)
      j.a.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:242)
      j.a.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:161)
      j.a.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:150)
      j.a.EventDispatchThread.pumpEvents(EventDispatchThread.java:146)
      j.a.EventDispatchThread.pumpEvents(EventDispatchThread.java:138)
      j.a.EventDispatchThread.run(EventDispatchThread.java:91)
    Could someone give me an explanation for this issue?
    Regards
    Julstorm
    Ps: I defined my JDeveloper Home directory in different directory as the Jdeveloper Installation. I installed Jdeveloper from a jar-File(java jdk 1.7.0_45 )

    Hi,
    sorry for my english i am not a native speaker, so that some of the expressions i use could soud "weird". I have  JDeveloper Studio 11.1.1.7.0 installed. The BPM Extension is ORACLE BPM Studio 11.1.1.6.0.15.53. I have already installed and reinstalled Jdeveloper and BPM Studio several times but every time after i have a process created my Jdeveloper crashes. That is the reason why i posted this request.
    Regards
    JulStorm

  • An unexpected severe error has occurred in JDeveloper 11.1.1.2.0

    Hi all
    i am using JDeveloper 11.1.1.2.0 on MAC OS 10.5
    however i am facing this problem when i click on preview and get the following error
    Uncaught exception
    java.lang.NullPointerException
    ice.pilots.html4.OutlinePainter.addRectangle(OutlinePainter.java:198)
    ice.pilots.html4.ObjectBox.paintChunk(ObjectBox.java:730)
    ice.pilots.html4.InlineBox.paintChildren(InlineBox.java:787)
    ice.pilots.html4.InlineBox.paintChunk(InlineBox.java:691)
    ice.pilots.html4.InlineBox.paintChildren(InlineBox.java:787)
    ice.pilots.html4.TableCellBox.paint(TableCellBox.java:438)
    ice.pilots.html4.OutlinePainter.drawBox(OutlinePainter.java:279)
    ice.pilots.html4.TableRowBox.paint(TableRowBox.java:385)
    ice.pilots.html4.OutlinePainter.drawBox(OutlinePainter.java:279)
    ice.pilots.html4.TableRowGroupBox.paint(TableRowGroupBox.java:328)
    ice.pilots.html4.TableBox.paint(TableBox.java:1019)
    ice.pilots.html4.OutlinePainter.drawBox(OutlinePainter.java:279)
    ice.pilots.html4.PositionedBox.do_paint(PositionedBox.java:284)
    ice.pilots.html4.PositionedBox._paint(PositionedBox.java:294)
    ice.pilots.html4.PositionedBox._paint(PositionedBox.java:315)
    ice.pilots.html4.PositionedBox._paint(PositionedBox.java:315)
    ice.pilots.html4.PositionedBox._paint(PositionedBox.java:315)
    ice.pilots.html4.PositionedBox._paint(PositionedBox.java:315)
    ice.pilots.html4.BoxList.paint(BoxList.java:32)
    ice.pilots.html4.CSSLayout.paint(CSSLayout.java:635)
    ice.pilots.html4.DocPaneXml.docPaint(DocPaneXml.java:665)
    ice.pilots.html4.swing.DocPanel.paintInto(DocView.java:1341)
    ice.pilots.html4.swing.DocPanel.paintComponent(DocView.java:1322)
    jx.s.JComponent.paint(JComponent.java:1017)
    jx.s.JComponent.paintChildren(JComponent.java:852)
    jx.s.JComponent.paint(JComponent.java:1026)
    jx.s.JComponent._paintImmediately(JComponent.java:5086)
    jx.s.JComponent.paintImmediately(JComponent.java:4870)
    jx.s.RepaintManager.paintDirtyRegions(RepaintManager.java:829)
    jx.s.RepaintManager.paintDirtyRegions(RepaintManager.java:714)
    jx.s.RepaintManager.seqPaintDirtyRegions(RepaintManager.java:694)
    jx.s.SystemEventQueueUtilities$ComponentWorkRequest.run(SystemEventQueueUtilities.java:125)
    j.a.event.InvocationEvent.dispatch(InvocationEvent.java:209)
    j.a.EventQueue.dispatchEvent(EventQueue.java:633)
    j.a.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:296)
    j.a.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:211)
    j.a.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:201)
    j.a.EventDispatchThread.pumpEvents(EventDispatchThread.java:196)
    j.a.EventDispatchThread.pumpEvents(EventDispatchThread.java:188)
    j.a.EventDispatchThread.run(EventDispatchThread.java:122)
    any idea please?
    Thanks

    Id this happening for any project or a specific one?
    If it happens to any project try to remove the system directory.
    (for location of the system directory do help->about->properties->ide.prefdir

  • An unexpected severe error has occurred in JDeveloper 11.1.1.10

    Hello,
    I have got the following error after trying to execute TestCase.
    Probably it would make sence if the developers make an automatic collection of the errors.
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Delete Previous Word[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Member Completion[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Member Completion[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Performing action Save[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: [ from oracle.ide.ceditor.CodeEditor ]
    Started CommandProcessor transaction: Auto Save Actions on thread AWT-EventQueue-0 at batch level 1
    Finished CommandProcessor transaction on thread AWT-EventQueue-0 at batch level 0
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Member Completion[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Member Completion[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Paste[ from oracle.ide.ceditor.CodeEditor ]
    Performing action Save[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: [ from oracle.ide.ceditor.CodeEditor ]
    Started CommandProcessor transaction: Auto Save Actions on thread AWT-EventQueue-0 at batch level 1
    Finished CommandProcessor transaction on thread AWT-EventQueue-0 at batch level 0
    Performing action Make [ from oracle.ide.ceditor.CodeEditor ]
    Performing action Maximize Toggle[ from oracle.jdeveloper.compiler.CompilerPage ]
    Invoking command: Insert Line[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Delete Previous[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Paste[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert Line[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Delete Previous[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Smart Indent[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert Line[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert Tab[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Indent Block[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert Line[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert Line[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Smart Indent[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert Line[ from oracle.ide.ceditor.CodeEditor ]
    Performing action Save[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: [ from oracle.ide.ceditor.CodeEditor ]
    Started CommandProcessor transaction: Auto Save Actions on thread AWT-EventQueue-0 at batch level 1
    Finished CommandProcessor transaction on thread AWT-EventQueue-0 at batch level 0
    Invoking command: Delete Previous[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert Line[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Delete Previous[ from oracle.ide.ceditor.CodeEditor ]
    Performing action Save[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: [ from oracle.ide.ceditor.CodeEditor ]
    Started CommandProcessor transaction: Auto Save Actions on thread AWT-EventQueue-0 at batch level 1
    Finished CommandProcessor transaction on thread AWT-EventQueue-0 at batch level 0
    Invoking command: Insert Line[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Member Completion[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Member Completion[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Delete Previous[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Member Completion[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Automatic Import[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Delete Previous[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Member Completion[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Paste[ from oracle.ide.ceditor.CodeEditor ]
    Performing action Save[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: [ from oracle.ide.ceditor.CodeEditor ]
    Started CommandProcessor transaction: Auto Save Actions on thread AWT-EventQueue-0 at batch level 1
    Finished CommandProcessor transaction on thread AWT-EventQueue-0 at batch level 0
    Performing action Make ujdbc.jpr[ from oracle.ide.ceditor.CodeEditor ]
    Performing action Make [ from oracle.ide.ceditor.CodeEditor ]
    Performing action Make [ from oracle.ide.ceditor.CodeEditor ]
    Performing action Maximize Toggle[ from oracle.ide.ceditor.CodeEditor ]
    Performing action New...[ from oracle.ide.navigator.ProjectNavigatorWindow ]
    Invoking command: Class Generation[ from oracle.ide.navigator.ProjectNavigatorWindow ]
    Invoking command: Insert Line[ from oracle.ide.ceditor.CodeEditor ]
    Performing action Save[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: [ from oracle.ide.ceditor.CodeEditor ]
    Started CommandProcessor transaction: Auto Save Actions on thread AWT-EventQueue-0 at batch level 1
    Finished CommandProcessor transaction on thread AWT-EventQueue-0 at batch level 0
    Performing action Make [ from oracle.ide.ceditor.CodeEditor ]
    Performing action Maximize Toggle[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert Line[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert Line[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Smart Indent[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert Line[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Performing action Expand Template[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Template[ from oracle.ide.ceditor.CodeEditor ]
    Performing action Undo Template[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Delete Previous[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert Line[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Delete Previous[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Paste[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Performing action Save[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: [ from oracle.ide.ceditor.CodeEditor ]
    Started CommandProcessor transaction: Auto Save Actions on thread AWT-EventQueue-0 at batch level 1
    Finished CommandProcessor transaction on thread AWT-EventQueue-0 at batch level 0
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Performing action Save[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: [ from oracle.ide.ceditor.CodeEditor ]
    Started CommandProcessor transaction: Auto Save Actions on thread AWT-EventQueue-0 at batch level 1
    Finished CommandProcessor transaction on thread AWT-EventQueue-0 at batch level 0
    Performing action Make [ from oracle.ide.ceditor.CodeEditor ]
    Performing action Maximize Toggle[ from oracle.ide.ceditor.CodeEditor ]
    Performing action Code Assist[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert Line[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Import Completion[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Import Completion[ from oracle.ide.ceditor.CodeEditor ]
    Performing action Save[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: [ from oracle.ide.ceditor.CodeEditor ]
    Started CommandProcessor transaction: Auto Save Actions on thread AWT-EventQueue-0 at batch level 1
    Finished CommandProcessor transaction on thread AWT-EventQueue-0 at batch level 0
    Performing action Go to Bookmark 1[ from oracle.ide.ceditor.CodeEditor ]
    Performing action Code Assist[ from oracle.ide.ceditor.CodeEditor ]
    Started CommandProcessor transaction: Add Exceptions To Method Header on thread AWT-EventQueue-0 at batch level 1
    Invoking command: Add Exceptions To Method Header
    Invoking command: audit-transform-end
    Finished CommandProcessor transaction on thread AWT-EventQueue-0 at batch level 0
    Performing action Save[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: [ from oracle.ide.ceditor.CodeEditor ]
    Started CommandProcessor transaction: Auto Save Actions on thread AWT-EventQueue-0 at batch level 1
    Finished CommandProcessor transaction on thread AWT-EventQueue-0 at batch level 0
    Invoking command: Insert Line[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert Line[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Performing action New...[ from oracle.ide.navigator.ProjectNavigatorWindow ]
    Invoking command: Class Generation[ from oracle.ide.navigator.ProjectNavigatorWindow ]
    Invoking command: Delete Previous[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert Line[ from oracle.ide.ceditor.CodeEditor ]
    Performing action Save[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: [ from oracle.ide.ceditor.CodeEditor ]
    Started CommandProcessor transaction: Auto Save Actions on thread AWT-EventQueue-0 at batch level 1
    Finished CommandProcessor transaction on thread AWT-EventQueue-0 at batch level 0
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Delete Previous[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Performing action Save[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: [ from oracle.ide.ceditor.CodeEditor ]
    Started CommandProcessor transaction: Auto Save Actions on thread AWT-EventQueue-0 at batch level 1
    Finished CommandProcessor transaction on thread AWT-EventQueue-0 at batch level 0
    Invoking command: Insert Line[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Smart Indent[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert Line[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Delete Previous[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Delete Previous Word[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Performing action Save[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: [ from oracle.ide.ceditor.CodeEditor ]
    Started CommandProcessor transaction: Auto Save Actions on thread AWT-EventQueue-0 at batch level 1
    Finished CommandProcessor transaction on thread AWT-EventQueue-0 at batch level 0
    Invoking command: Insert Line[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Performing action Expand Template[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert Line[ from oracle.ide.ceditor.CodeEditor ]
    Started CommandProcessor transaction: Add Javadoc Comments on thread AWT-EventQueue-0 at batch level 1
    Invoking command: Add Missing Javadoc Tags
    Invoking command: audit-transform-end
    Finished CommandProcessor transaction on thread AWT-EventQueue-0 at batch level 0
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Delete Previous[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Delete Previous[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Delete Previous[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Performing action Save[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: [ from oracle.ide.ceditor.CodeEditor ]
    Started CommandProcessor transaction: Auto Save Actions on thread AWT-EventQueue-0 at batch level 1
    Finished CommandProcessor transaction on thread AWT-EventQueue-0 at batch level 0
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Delete Previous Word[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Delete Previous Word[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Delete Previous Word[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Delete Previous[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Delete Previous[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Paste[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert Line[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Delete Previous[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Performing action Save[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: [ from oracle.ide.ceditor.CodeEditor ]
    Started CommandProcessor transaction: Auto Save Actions on thread AWT-EventQueue-0 at batch level 1
    Finished CommandProcessor transaction on thread AWT-EventQueue-0 at batch level 0
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Performing action Save[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: [ from oracle.ide.ceditor.CodeEditor ]
    Started CommandProcessor transaction: Auto Save Actions on thread AWT-EventQueue-0 at batch level 1
    Finished CommandProcessor transaction on thread AWT-EventQueue-0 at batch level 0
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Delete Previous Word[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Delete Previous Word[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Delete Previous[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Delete Previous[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Delete Previous[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Delete Previous[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Delete Previous[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Delete Previous[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Delete Previous[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Performing action Save[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: [ from oracle.ide.ceditor.CodeEditor ]
    Started CommandProcessor transaction: Auto Save Actions on thread AWT-EventQueue-0 at batch level 1
    Finished CommandProcessor transaction on thread AWT-EventQueue-0 at batch level 0
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Delete Previous[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Performing action Code Assist[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert Line[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert Line[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Delete Previous[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Import Completion[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Import Completion[ from oracle.ide.ceditor.CodeEditor ]
    Performing action Save[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: [ from oracle.ide.ceditor.CodeEditor ]
    Started CommandProcessor transaction: Auto Save Actions on thread AWT-EventQueue-0 at batch level 1
    Finished CommandProcessor transaction on thread AWT-EventQueue-0 at batch level 0
    Invoking command: Class Completion[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Automatic Import[ from oracle.ide.ceditor.CodeEditor ]
    Performing action Save[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: [ from oracle.ide.ceditor.CodeEditor ]
    Started CommandProcessor transaction: Auto Save Actions on thread AWT-EventQueue-0 at batch level 1
    Finished CommandProcessor transaction on thread AWT-EventQueue-0 at batch level 0
    Performing action Previous File[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert Line[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Paste[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Delete Next[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert Line[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Performing action Save[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: [ from oracle.ide.ceditor.CodeEditor ]
    Started CommandProcessor transaction: Auto Save Actions on thread AWT-EventQueue-0 at batch level 1
    Finished CommandProcessor transaction on thread AWT-EventQueue-0 at batch level 0
    Invoking command: Paste[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Replace[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Replace[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Replace[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Performing action Maximize Toggle[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Paste[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Paste[ from oracle.ide.ceditor.CodeEditor ]
    Performing action Save[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: [ from oracle.ide.ceditor.CodeEditor ]
    Started CommandProcessor transaction: Auto Save Actions on thread AWT-EventQueue-0 at batch level 1
    Finished CommandProcessor transaction on thread AWT-EventQueue-0 at batch level 0
    Invoking command: Paste[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Delete Previous Word[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Member Completion[ from oracle.ide.ceditor.CodeEditor ]
    Performing action Save[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: [ from oracle.ide.ceditor.CodeEditor ]
    Started CommandProcessor transaction: Auto Save Actions on thread AWT-EventQueue-0 at batch level 1
    Finished CommandProcessor transaction on thread AWT-EventQueue-0 at batch level 0
    Invoking command: Replace[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Member Completion[ from oracle.ide.ceditor.CodeEditor ]
    Performing action Save[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: [ from oracle.ide.ceditor.CodeEditor ]
    Started CommandProcessor transaction: Auto Save Actions on thread AWT-EventQueue-0 at batch level 1
    Finished CommandProcessor transaction on thread AWT-EventQueue-0 at batch level 0
    Invoking command: Replace[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Delete Previous[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Member Completion[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Performing action Save[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: [ from oracle.ide.ceditor.CodeEditor ]
    Started CommandProcessor transaction: Auto Save Actions on thread AWT-EventQueue-0 at batch level 1
    Finished CommandProcessor transaction on thread AWT-EventQueue-0 at batch level 0
    Invoking command: Replace[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Performing action Save[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: [ from oracle.ide.ceditor.CodeEditor ]
    Started CommandProcessor transaction: Auto Save Actions on thread AWT-EventQueue-0 at batch level 1
    Finished CommandProcessor transaction on thread AWT-EventQueue-0 at batch level 0
    Invoking command: Replace[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Member Completion[ from oracle.ide.ceditor.CodeEditor ]
    Performing action Save[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: [ from oracle.ide.ceditor.CodeEditor ]
    Started CommandProcessor transaction: Auto Save Actions on thread AWT-EventQueue-0 at batch level 1
    Finished CommandProcessor transaction on thread AWT-EventQueue-0 at batch level 0
    Invoking command: Replace[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Member Completion[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Replace[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Insert[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: Member Completion[ from oracle.ide.ceditor.CodeEditor ]
    Performing action Save[ from oracle.ide.ceditor.CodeEditor ]
    Invoking command: [ from oracle.ide.ceditor.CodeEditor ]
    Started CommandProcessor transaction: Auto Save Actions on thread AWT-EventQueue-0 at batch level 1
    Finished CommandProcessor transaction on thread AWT-EventQueue-0 at batch level 0
    Performing action Maximize Toggle[ from oracle.ide.ceditor.CodeEditor ]
    Performing action New...[ from oracle.ide.navigator.ProjectNavigatorWindow ]
    Performing action New...[ from oracle.ide.navigator.ProjectNavigatorWindow ]
    Invoking command: Create StringUtilTest
    Best,
    Tim

    This post lacks any useful information!
    What is the question? Or is it a statement?
    Timo

  • When create new projec "An unexpected severe error has occurred"

    I've update to JDeveloper when create new project i get the following error
    Sep 11, 2010 8:33:43 AM oracle.jdevimpl.rescat2.hook.DTExtensionLoader loadAdapters()
    WARNING: error while registering resource catalog adapter factory [oracle.webcenter.content.internal.model.rc.ContentInitialContextFactory] for connection type [oracle.webcenter.content.internal.model.rc.ContentConnectionType]
    oracle.classloader.util.AnnotatedClassNotFoundException:
         Missing class: oracle.webcenter.content.internal.model.rc.ContentConnectionType
         Dependent class: oracle.jdevimpl.rescat2.hook.DTExtensionLoader
         Loader: ide-global:11.1.1.0.0
         Code-Source: /C:/Oracle/Middleware/jdeveloper/jdev/extensions/oracle.jdevimpl.rescat2.jar
         Configuration: extension jar in C:\Oracle\Middleware\jdeveloper\jdev\extensions
    This load was initiated at ide-global:11.1.1.0.0 using the Class.forName() method.
    The missing class is not available from any code-source or loader in the system.

    Did anyone find out why this is happening?I just installed Jdeveloper and I am facing the same problem
    Cheers
    Sridhar

Maybe you are looking for