Severe Jitter/Glitches with Audigy Value/SE in Windows 7 64bit

Hello all,
Im experiencing a severe sound jitter and random "clicks" in windows 7 when playing music and using the computer for browsing.
I didnt notice this problem before because i used to keep my computer idle while doing other stuff when playing music.
the sound plays as if it "slows down" or something when doing random activities on the computer
My setup is
Intel Core 2 Duo E6550
4GB DDR2 800 MHZ
Creative Sound Blaster Audigy Value/SE
Windows 7 64BIT
Gefore 8880GT
I use winamp for playback.
Im using the latest drivers from the creative site.
Is there anything I can do?
The sound so

Thanks for the reply jmacguire.
I'm using default values: 6 bit, 48000 hz (DVD Quality)
Which one do you recommend with the SB Audigy SE?
The sound distorts when listening music in youtube or other flash webpages, both in normal and in HQ settings.
I have tried almost everything. I think the drivers downoladed for Windows 7 works better.
Then the Autoupdate function downloaded some new drivers (version .0090 I think) and it screwed up the sound on the web.

Similar Messages

Help needed with Audigy Value! Please he

I just bought the sound blaster audigy value sound card so after disabling the onboard sound, i installed the card and the softwares and drivers. What happened was that the speakers were only making sounds from the woofer and the front center speaker, the other 4 speakers were transmitting no noise at all. I checked the device manager to see if the audigy value card was to be shown as working properly, and it was.
In a state of I-should-find-something-on-the-net-to-help-me state, I downloaded the new official drivers from this creative website, opened it but a message appeared that "it has not detected any audigy hardware". (there's sound but only from the woofer and the center speaker).
I have a creative 5. inspire 5200 series. Do you guys think there's a problem with my sound card, my speakers or the configurations of the cables or some driver thing.
Any help will be appreciated and thanked.

Have you
- connected cables properly?
- set speakers to 5. (on speaker settings panel)?
- disabled/enabled CMSS
---- (see http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=2563)
- set audio HW acceleration (Windows Audio settings)?
- tried to install drivers by these instructions?
jutapa

A few Problems/Glitches with InDesign CC 2014 on Windows 7 and CC on Mac OS 10.6.8

We're experiencing some quirky glitches with InDesign CC on a Mac running OS 10.6.8, and with CC 2014 on Windows 7. I'll indicate which system on each problem...
Anchored objects disappear when anchored into boxes that are, in turn, anchored into text flow.
We publish catalogs and anchor all our images to the accompanying text so that as we remove/add products, all the text and images flow together. We have several instances in which we use a box to highlight certain products. In that box might be 1, 2, 3, or more products, each with anchored images. When we anchor those boxes within the main text flow, many of the images inside the box disappear. The anchors are still there but we can't see the images. This is happening on both systems.
"Replace" field disappears when selecting anything from the “wildcard/special char.” menu in "find and replace". Windows.
Shift click to unlock master page items bring background item to foreground.
In CS4 and 5.5, if you shift-clicked to release an item from the master page, the top-most item was released. Now it seems as though the item that is farthest behind gets released first, which makes it impossible to select any other items if that one is a full-page background. Both systems.
Double/triple clicking on a word to select it does nothing.
You could literally click for 5 minutes and it wont select anything. You have to click off the box, use selection tool then click back onto the box and then it will work. You can move the cursor a few letters away and it will select the appropriate line or paragraph but it did not work this way in earlier versions. Both systems.
Any suggestions, or is it something we're doing wrong?
Thanks,
Lloyd

The list of obvious errors and glitches and illogical behaviour in all Indesign versions is long. With newer versions, some items disappeared from the list, but new ones were added.
Best is to use the Adobe bug report form to let Adobe know in hope, they really read, care and someday do something about it.

Query - Sampling speed in Device Control - Audigy Value

After installing the Hardware / Drivers etc for SB Audigy Value PCI card, Windows Control Panel shows one option named Device Control . Clicking on it opens a window wherein you can set the sampling speed for PCI/USB and SPDIF.
In case of PCI, I notice that the only two options 48 & 96 KHz are available. I would have expeted even 44. but it'ss not there..is this normal behavior of this control i.e. not to have 44. sampling option for PCI.
Thanks

chapas wrote:
Hello. Does the Audigy Value have true 24-bit support? I see a Creative application named "Device Control" that has some 24bit options, but I don't know if these are correct. Is 24-bit supported by software or hardware? If I change the option in "Device Control", will Winamp play in 24-bit's Thanks!
Yes audigy value has 24 bit support, winamp and all cd audio only support 6 bit,except HDCD it suppports 20 bit but only when you play it in HDCD player, and in windows you can play it using Windows Media Player 0Message Edited by Clickm3 on 04-08-2006 2:20 AM

SB Audigy Value card Conflict with Modem re-booting my

My PC using Intel D95GAV M/B, 3.2GHz with XpSP2. On-board sound ok. Recently installed SB Audigy Value card. It is working perfectly. But with that card I can't use any modem function, any time if I dial or connecting to Internet or Outlook my PC gets re-boots. I already disabled on-board audio. different PCI slot tried. Then I replaced the Audigy card. Replaced the Modem. Audigy Value card tried with another 3 PCs. all are facing the same problem.
Please Help me!
4S7MD

Unfortunately if you read the release notes for the Vista compatible driver it tells you not to use it on your particular sound card ;(?http://us.creative.com/support/downl...rtype=&x=2&y=7?Notes:
DO NOT?install this driver for Sound Blaster Li've! 24-bit, Sound Blaster Audigy LS, Sound Blaster Audigy SE, or Sound Blaster Audigy Value.<However when you tell the site you have an Audigy Value card it directs you to these incompatible drivers
go go Creative

Help with Sound Blaster Audigy Value 24-bit..keeps crashing when connecting to the inter

pls help..every time i connect to the internet while playing mp3's or just any applications or programs that produces sound and even when streaming some clips through the internet, my computer restarts..any sound that is produced when i am online it will restart..but if i just surf the net without playing anything..it works fine...
how cn i solve this problem..
pls help..thnx
my spec:
AMD Sempron 2400+
Epox 8rda3i
Seagate 80gb
Palit GeForce 6600gt
Creative Sound Blaster Audigy Value 24-bit

screwguy_28 wrote:
is this the one?
IRQ 0 System timer OK
IRQ Standard 0/02-Key or Microsoft Natural PS/2 Keyboard OK
IRQ 3 Communications Port (COM2) OK
IRQ 4 Communications Port (COM) OK
IRQ 5 Uni'versal Serial Bus (USB) Controller OK
IRQ 6 Standard floppy disk controller OK
IRQ 8 System CMOS/real time clock OK
IRQ 9 Microsoft ACPI-Compliant System OK
IRQ 9 SCSI/RAID Host Controller OK
IRQ 0 MPU-40 Compatible MIDI Device OK
IRQ NVIDIA nForce PCI System Management OK
IRQ 2 PS/2 Compatible Mouse OK
IRQ 3 Numeric data processor OK
IRQ 4 Primary IDE Channel OK
IRQ 6 Sound Blaster Audigy OK
IRQ 8 SoftV92 Data Fax Modem OK
IRQ 9 NVIDIA GeForce 6600 GT OK
IRQ 2 Standard OpenHCD USB Host Controller OK
IRQ 22 Standard OpenHCD USB Host Controller OK
Everything seems to be OK so it's propably the drivers for your modem that is causing the issue. Just try if updating them helps anything.
Also, you can turn the MPU-40 (onboard MIDI/Game port) if you dont need it.
jutapa

Erorr with Creative Blaster Audigy Value

hi
i have one
Creative Blaster Audigy Value.
but when im run creatvie graphic equlaizer see this erorr :
Graphic Equalizer
The audio device supported by this application is not detected. The application will exit.
OK
what am i doing?

screwguy_28 wrote:
is this the one?
IRQ 0 System timer OK
IRQ Standard 0/02-Key or Microsoft Natural PS/2 Keyboard OK
IRQ 3 Communications Port (COM2) OK
IRQ 4 Communications Port (COM) OK
IRQ 5 Uni'versal Serial Bus (USB) Controller OK
IRQ 6 Standard floppy disk controller OK
IRQ 8 System CMOS/real time clock OK
IRQ 9 Microsoft ACPI-Compliant System OK
IRQ 9 SCSI/RAID Host Controller OK
IRQ 0 MPU-40 Compatible MIDI Device OK
IRQ NVIDIA nForce PCI System Management OK
IRQ 2 PS/2 Compatible Mouse OK
IRQ 3 Numeric data processor OK
IRQ 4 Primary IDE Channel OK
IRQ 6 Sound Blaster Audigy OK
IRQ 8 SoftV92 Data Fax Modem OK
IRQ 9 NVIDIA GeForce 6600 GT OK
IRQ 2 Standard OpenHCD USB Host Controller OK
IRQ 22 Standard OpenHCD USB Host Controller OK
Everything seems to be OK so it's propably the drivers for your modem that is causing the issue. Just try if updating them helps anything.
Also, you can turn the MPU-40 (onboard MIDI/Game port) if you dont need it.
jutapa

New Audigy Value card completely nonfunctional in windows server 2

Hi all,
I just bought a new Creative Audigy Value card for use in a windows server 2008 system that will control the electronic school bells system in the academy I work at. It's desperately important that we get a sound working on this server so that the bells can ring again.
Anyway, so here's the problem - the sound card, once installed, says that it is installed properly (i've used x64 vista drivers .0077 and .0065A from creative's website, installed and reinstalled several times) but in the vista system tray, it just shows the speaker with the X on it. When you click "go to mixer" it says "there are no audio devices installed."
In the audio properties, you can see the icon for the "sound blaster audigy", but although you can SEE the buttons for "configure" and "test" - clicking on them yields nothing at all.
I'm really at my wit's end here. The school needs its bell system, which this server plays through it's sound card. What can i do to get this sound card working like it's supposed to be? any ideas?

Yes, well, the box in the store had a sticker on it that said it was compatible with Windows Vista 64bit and 32bit, so I assumed that a 64bit server would be fine for it, but perhaps my assumption was incorrect.
At least if you tell me, that you're 00% sure that this card is not compatible with Server 2008, I will be able to move on and look for something else and use this card for a workstation instead.
As for the first commenter - thanks, but yeah I had already made sure that both the audio service and audio endpoint driver were automatically starting up with the server, so that's not the issue.
So, Mr/Ms Creative Moderator - I checked the page and it does not specifically mention Server 2008, just Vista. Can you let me know for sure that this card is not compatible? If you can tell me no, at least I can write it off as a stupid mistake. If you tell me that it should work though, I feel like I will have to keep trying to force this one to work.
Thanks!

Errors/Glitches with my brand new Equium A200 15I (incl video hardware)

Hi,
I just treated myself to a new laptop last Saturday and have thus only had it for about 3 and a half days so far but I noticed a few small things that I weren't sure were errors/faults or if they were just because its new, such as the fact that sometimes I type things with the keyboard and some of the letters don't appear on screen, which I think is probably more to do with me not typing or pressing heavily enough on the keys rather than anything else, its not happening so much now...the touch pad gets a bit sticky too and it thinks I want to scroll up and down when I want to move the cursor not scroll sometimes but I manage to get it to work, I think most laptops have glitches like this and presumably I could help fix it by calibrating the touch pad(?) I haven't had time to look into that yet though... there are a few other things though and most worryingly just this morning I got a video hardware error message, so now im a fair bit worried/suspicious that there may be a real fault with it and would like to know if this is the case, whether its something I can possibly fix (im no real expert especially with hardware but I can always try downloading and installing updates/fixes and that sort of thing if it'd fix problems).
The main thing which is worrying me most, is that this morning a message suddenly came up on screen, warning me that there had been a video hardware error, yesterday evening, which I clicked on a button I think to load more info. and I took this screen cap of it:-
http://img528.imageshack.us/img528/724/errorscreencapcw1.jpg
I thought it may help to show the actual full message rather than just trying and pasting the info., well ok to be honest I didn't notice it let you copy it to clipboard but oh well (oops lol).
I know there's a topic about a similar error but I didn't want to butt in on that discussion as I presume that should be for that persons error to be discussed, mine may be slightly different I don't know... I followed the instructions given in that discussion and checked the device manager and no hardware faults are showing up there, btw it says in the device manager, under display adapters, that its a Mobile Intel 945GM Express Chipset Family, im sure all the A200 15I laptops have the same card but I thought I'd just clarify that. Incase that wasn't the right thing to check I also checked under 'sound, video and game controllers' (as the error said it was a video hardware error) where it lists the only one as being 'Realtek High Definition Audio' and I checked the properties there, on both under properties it says that the device is working properly, with no signs of any faults...
The thing is, I had read online somewhere that there is some issue with the graphics or video cards. I'd read that they can be glitchy and sometimes break down after the one year. I'd also asked my dad about this and we checked that it was an Intel graphics card that came with this laptop, which it is, and we reckoned that Intel chips should be as reliable as any other brand really... so I didn't think that there should be a problem, though if there is I have until next September to get it fixed before the warranty expires!
What surprises or kind of worries me though, is that the error message was only presented to me this morning. It dates the error as having occured at 19:53pm... I was using it last night and infact I went to have a shower and I put the laptop screen down before I went to shower at around 7:35pm, I presumed that its ok to just close the lid and it would automatically go into hibernate mode or something similar(?) im wondering if that had something to do with it, as I 7:53pm would have been roughly when I came back and lifted the lid/screen up again to use the laptop again... I can only presume, given the time it quotes, thats what caused the fault?
It does give me the option to 'update driver software' and 'scan for hardware change' within the device manager, should I run both or either of those perhaps? is this a common glitch? should I be worried at all etc...
Any help is much appreciated, if more info. is needed then let me know and ill clarify what I can. Also in terms of whats installed, I have quite a few programs, for graphics I have an old version of Paint Shop Pro which I installed yesterday morning, it seemed to install fine, thats Paint Shop Pro 7 from Jasc, I also have some converter programs (for vid files, 3GP and stuff), AVG Virus scan, Spybot Search & Destory, DBPowerAmp, FTP Commander, Quicktime and Real Player, fairly basic stuff like that, nothing much else just my old pics and vid files I transferred from my old XP laptop to this one, in my documents... I don't have any high powered or complicated games or anything else like that installed. Also at the time the video hardware error message states, all that was running when I had the lid down (or before I put the lid down) would have been Windows Live Messenger (though im pretty sure I signed out before putting the lid down) and an IE window, im pretty sure thats all, I wasn't working on anything else just checking the 'net...
There are some other things I've noticed too that I thought perhaps I should mention(?), one thing I've noticed it doing is the screen going blank and then coming back very quickly, alot. I've already asked about this a day or so ago as by then I realised that it was only doing that before loading the 'Windows needs your permission to continue' window/message, which apparently its supposed to do and is something to do with the computer switching from displaying the normal desktop to the secure desktop, which I sort of understand lol.
So I believe that isn't anything to worry about but I have noticed over the lastday or so, that the screen seems to do this more, going blank then coming back again, even when that permission message doesn't show up.
For instance this morning when I first put it on and went to check my home page, I clicked on a link at the bottom of the page or wherever to load another page within the website and the screen went blank for a moment before coming back a second later with the requested page. Is this normal too? or a Vista related glitch, or is there a possibility there may be a glitch with the monitor? im guessing it may be more of a Vista thing but I thought I'd ask here just incase, I decided not to pay for any extra insurance/extended warranty as I'm very careful with my items and take good care of them and so I'm being careful to try and spot any faults early on while they may be fixable under the basic warranty and what-not...
Another thing I've noticed is that to start with, when I pressed and held the 'FN' button, a range of black and white icons appeared on screen which told me which F button(s) to use to make certain adjustments, it still does that when I try it now but at other times, it doesn't show the icons, no matter how long I hold the 'FN' button down. That doesn't really matter since I can tell from the symbols on the keys on the keyboard which buttons to press but its just inconsistent, is there a reason why sometimes the row of icons on screen will show up when I press and hold the 'FN' button and other times it won't show at all?
Also sometimes if I move the cursor right to the top of the screen, those icons load as they seem to always be located at the very top of the screen but sometimes this is a problem, if im trying to click on something else and one of those icons comes up instead... im sure you can switch this option off somehow but should I be worried that the icons don't always show when I press and hold the right button(?) just trying to be cautious!
I think this post is long enough and I can't think what else I could possibly add to help, so I'll leave this here. I don't mean to seem too paranoid but thought it best to mention this stuff incase anyone recognises these glitches/errors and can recommend a quick way to fix any problems before they may develop into anything worse... many thanks in advance for any help with any of these issues!!
(mods let me know if im wrong to include so many things in one topic, I kind of did this quickly and I apologise if im breaking any rules I don't mean to, if possible please break this into a few different topics or I can do this, though ill be at work frm 2-9pm today so might not be back and able to check here until Thursday morning (October 4th))

Hi Isla
Your message is really, very, very long. I think its too long to read it twice ;)
. Regarding all your issues on this notebook well. it looks like you have installed many 3rd party programs and applications. In such case its not easy to say if such issues are software or hardware related. But I presume its software.
I checked your screenshot pic but I have never seen such error message. But it looks like something wrong with the graphic card driver. The message says something about Live Kernel Event
A kernel's services are requested by other parts of the operating system like graphic card driver for example.
In such case I would recommend updating the graphic driver. According to you message its a Intel GPU. So you could check the Intel page for the compatible graphic chip driver.
Regarding the FN key issue;
The Toshiba FlashCard utility controls the FN key functionality. I have read in this forum that this application does not run smoothly and in some cases it causes some issues. The new update should solve the problems. You should check the Toshiba driver page. The FlashCard Utility is a part of the Toshiba Value added package.
So finally one more hint:
You should always check for the Vista updates on the Microsoft page. This OS is not perfected and Microsoft releases very often patches and fixes
Hope it could helps a little bit.
If necessary just ask for more info :)
Regards

PO with Zero value in SRM

Dear All;
We are using SRM7.0 with classic scenario i.e shopping cart is created in SRM and PO is triggered in SRM but created in ERP.
Sometimes, the buyer gets a shopping cart with several lines. After negotiation with the supplier, he agrees (the supplier) to give one of the items as free.
While converting SC to PO in SRM, the system asks to enter a price so that PO can be created in ERP. Then the buyer has to put 1 then goes to the ERP and tick the free indicator flag.
Is there a way to create a PO with Zero value from SRM?
Thanks

Hi ,
After the price is entered in the PO in SRM , delete the price conditions in the conditions tab at the item level in SRM . This will mark the free goods tick in the ECC automatically .
This works in our extended classic system .
-Hari.

Saound blaster audigy value windows vista 32 bit problem in driver compatibility!!!

i have installed the sb audigy value latest drivers july 9 2007?and it installed clean and then after a few restart it will detect again the standard?pci to pci bridge and sound devices... when i am using?xp this does not happenwhat is wrong with your drivers? i am installing the?drivers?again and again and same thing happen and my settings reverting always to 6 bit 48khz my card is 24 bit 96khz in the first install... and after a few restart?the setting for 24 bit and 96khz?will dissapear and the only available is 6 bit 48khz somtimes not working? kindly help me... plz... all my problem in windows vista 32 bit has been resolve this is the only one remaining...

Graphic drivers for the iMac is a regular question, and there are some tips and answers. I'd have skipped Vista, too much like beta and gone for 7, but you have it now....
Check the end of this thread with tips:
http://discussions.apple.com/thread.jspa?threadID=1866970&tstart=0&messageID=112 87449#11287449
And take a look for other similar threads.

A filter value for Query is set with some value automatically

Hello SAP sourcing Guru!
I created a query which has several filters.
Some of Filter's type is VLV.
When I preview the query somehow the filter values are already set with some value even though I did not set the default value.
For example, filter name is Region and there are four regions: Asia, NA, Europe, and SA.
I want to select one of them from drop-down menu. But Asia was already selected when I clicked the preview button for the query. I want to see "Please Select" instead of Asia from drop-down menu. I did not select "Prefill value from cache" for the filter. I made the filter Optional only. I did not set Default Value either for the filter.
Any clues?
Thank you for your response in advance.

Hi,
In the Default value field of the filter prompts, you need to mention the Class Reference ID of the corresponding field. E.g., if you have Contract document phase as a filter, then in that if you want to display a blank or none value, then you should use null:2016.
Similarly for vlv type, the system has a value 616. Hence if you want to display a None value insteead of Asia, use the following in the Default value field:
0:616:null.
The way to find the class reference ID is to goto the RG > Class Reference > Look for the field that you are attempting to default on.
Hope this helps,
Vikram

Edit Procedure with selected values

Hi,
I have an edit form where i drugged my view as an adf form.
I created in my Application Module a method called "save()" which what i do is just commit:
try {
getDBTransaction().commit();
} catch (JboException ex) {
getDBTransaction().rollback();
throw ex;
On my form i have some radio buttons. One of them is called LandType, with two options (OptionA and OptionB).
Please note that this is an edit operation so there is a preselected value when i edit a record.
I created some entity level validation which is conditional based on the selection of the above radio button. For example i have 2 input boxes, "InputA" and "InputB". If the user selects "OptionA" the "InputA" is required. If the user selectd "OptionB" then "InputB" is required.
For the create operation everything runs smoothly.
For the edit operation i face this problem.
I have a record with "OptionA" selected and "InputA" with some value ("InputB" is empty)
When i change to "OptionB", i render the "InputB" text box and i get my error message for an empty field("InputB"). If i press again save (calls my commit method in my AppModule) then the radio button from "OptionB" goes back to "OptionA" and if i click again save, it saves the changes!!!
How can i overcome this? I want the new value selected to remain.
Thanks
Antonis

Some glitch in my blogging software currently prevents me from posting it on my blog, but I've uploaded a 10.1.3.3-based example workspace here:
http://otn.oracle.com/products/jdev/tips/muench/condreq/OptionalRequiredFields.zip
This is the example blurb that will eventually appear as example #124 on my blog when I am again able to upload to it.
This example illustrates how to validate and render
conditionally-required attributes. After running the included
CreateTables.sql script to create the
OPTIONAL_REQUIRED_TEST table, run the TestPage.jspx to
see that when a row has its RowType attribute set to the value
A then the ValueA inputText component renders, while if
its RowType attribute is instead set to the value B then
the ValueB inputText field renders. These fields set the
showRequired property to true to show the required field
indicator to the end-user even though the underlying ValueA and
ValueB attribute are not marked as mandatory. The conditional
mandatory validation is performed in the TestEntity entity
object using entity-level method validators. The radio group UI
component is marked to have its autoSubmit property true, and
the ValueChangeListener method in the backing bean for the page
sets a request-scope attribute as a flag to indicate that the row type
is changing. This flag is then referenced by the
ConditionalValidationPageController -- identical in function to
the one you might have seen in Example# 62 "Cascading Lists in JSF" --
which is configured to be used by the TestPage by setting the
ControllerClass property of its page definition. This
customized page controller avoids validating the row if it detects
that the row type is changing. The conditional rendering of the ValueA
or ValueB inputText components is handled declaratively using an
appropriate EL expression for the component's rendered
property. When the autoSubmit radio group (with component id
"RowTypeRadio") causes its partial-page request, the panelForm
component in which the ValueA and ValueB inputText's reside is
declaratively "repainted" by having its partialTriggers
attribute set to that "RowTypeRadio" id value. By performing the
partial-page triggering on the enclosing panelForm component, you
avoid the gotchas related to having PPR events delivered to
currently-unrendered components.

How to select rows with min value on a specific column

I have a query:
select
m.x1,
round (to_date (l.y1, 'mm/dd/yyyy HH:MI:SS AM') - m.x2, 0) as numofdays
from
table1 m,
table2 l
where
l.x3 = m.x3 and
to_date (l.y1, 'mm/dd/yyyy HH:MI:SS AM') >= TO_DATE('01012013','MMDDYYYY') and
and I got this result table:
x1 (ID)
numofdays
001
5
001
10
002
2
003
3
003
1
004
0
005
66
several ID's have multiple values on the second column, I want to have only distinct IDs with smallest "numofdays" like this:
x1 (ID)
numofdays
001
5
002
2
003
1
004
0
005
66
Any ideas?

Hi,
The most general and versatile way is a Top-N Query:
WITH   got_r_num AS
    select
            m.x1,
            round (to_date (l.y1, 'mm/dd/yyyy HH:MI:SS AM') - m.x2, 0) as numofdays
    ,       ROW_NUMBER () OVER ( PARTITION BY m.x1
                                 ORDER BY      to_date (l.y1, 'mm/dd/yyyy HH:MI:SS AM') - m.x2
                               ) AS r_num
    from
          table1 m,
          table2 l
    where
          l.x3 = m.x3 and
          to_date (l.y1, 'mm/dd/yyyy HH:MI:SS AM') >= TO_DATE('01012013','MMDDYYYY') and
SELECT x1, numofdays
FROM    got_r_num
WHERE   r_num   = 1
If you'd care to post CREATE TABLE and INSERT statements for your sample data, then I could test it.
Notice that the sub-query (got_r_num) is exactly what you posted, only with a new column (r_num) added to the SELECT clause.

Show abscence quota with 0 value

Hello all,
I need several quotas to be showed in IT2006 though their value (entitlement) is 0.
These quotas have to be created first day of the year with 0 value entitlement, and then as the year goes by, they are increased depending on several criteria.
These quotas are calculated via time evaluation (RPTIME00) and all of them work fine, except for this issue about when they still have a 0 value.
Thank you very much in advance.
Gonzalo

with zero value quota can not be generated as andy said write a LSMW to create a quota with zero value.
regards,
mohammed

Severe Jitter/Glitches with Audigy Value/SE in Windows 7 64bit

Similar Messages

Maybe you are looking for