Severe test trying to register for this forum...

I've just registered for this forum, but I needed every ounce of my technical wits to achieve that...
I was asked for a "Screen Name" so ended up with Apodida (Hi there, other "Swifty" and "Swiftie").
Then I was asked for "*Word verification by reCAPTCHA".
The problem was, no CAPTCHA image appeared. My browser (Opera) accepts all images, so I presumed a browser issue and tried Firefox... same result. IE9... same again. Chrome v23... same. Safari... same.
If you think I'm laying it on a bit thick, it's because I seem to be heading for: http://swiftys.org.uk/images/dilbert.gif
The answer was to disable JavaScript, as the page then works in a purely textual mode. Of couse, no one who needs this information will find their way here...

Thanks for the answer, Apodida.
The problem is even more complicated that can be imagined.
You must have javascript enabled in order to log into the main HP Passport screen. If it is not enabled, the button to login using your username and password will not appear. If you can't log into HP Passport, you can't participate in any discussions.
However, if you've never participated in the discussion forum and do not have a forum username associated to your HP Passport account, you'll need to register a username and go through the ReCaptcha test to prove that you're a human being. If you have Javascript enabled in your browser, the ReCaptcha image will not appear on the screen. Therefore, you must disable Javascript in order to register and participate in the forum.
That is just plain dumb. It's certainly apparent to me that the discussion forum and the HP Passport website are managed by different web devs/admins who aren't talking to each other because their separate browser requirements are at conflict with each other. The end result - the users suffer, leaving the impression that HP doesn't know how to take care of their business.

Similar Messages

Need my Email Address Switched for This Forum-Been Trying for a Week

Need my Email Address Switched for This Forum-Been Trying for a Week.
Can an Administrator PM me and switch it?
thank you!

See post here for more information, but this is officially resolved!
As of 09/29/09, you can now change your email address for the forum via My Settings even if you have a community-only id. Many thanks to the mods for this update!
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.
"All knowledge is worth having."

Communication channel not working -- No Adapter Registered for this channel

Hi Experts,
I see the status of one of my Communication Channels (In RWB Communication Channel Monitoring) as
"No Adapter Registered for this channel".
I saw one of the threads related to this but could not fins a suitable reason for it as our issue seems to be different here.
We have recently deployed the SFTP adapter and PI team is testing this communication channel and they got this error.
I checked and found that SFTP adapter (in the JAVA EE applications) was not working and when I tried to start ,its giving error
failed to start.
additional status message as
Status Details: Cannot load class "com.advantco.pi.af.adapter.sftp.SPIManagedConnectionFactory". Possible reasons: 1) class file cannot be found in the JARs located in the RAR file,
2) class file cannot be found in referenced loaders,
3) failed to initialize some static block(due to unhandled exception),
4) failed to load or there is incompatibility with some native parts, or
5) cannot load a class related to it, due to some reasons above.
Could you guys suggest from where exactly is it trying to pick up the files.
is it u201Cu2026/j2ee/cluster/apps/xxxxxxx/SFTP Adapteru201D ????
Can anyone suggest the possible reasons and the root cause of it
Regards,
Yogi

Hi Yogi,
i am glad you solved the problem.
If you have any issue with the Advantco SFTP adapter, best is to send an email to "support at advantco.com" directly.
Peter Ha * SAP NetWeaver PI Architect * Advantco International LLC
www.advantco.com

When trying to register for efax, my printer says it cannot connect to the internet. eprint works.

when trying to register for efax on my HP Photosmart 7515, my printer indicates it cannot connect to the internet. The eprint works works great. The wireless network test results indicate connectivity PASS.

Hello Stevej13,
The first thing I would do is follow step six in this document to set a static IP: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02817031&cc=us&dlc=en&lc=en&product=4023246&tmp...
When it askes for DNS information, enter in Google's DNS. Preferred DNS = 8.8.8.8 Alt DNS = 8.8.4.4
If that does not help, if you could provide me with the following information it would help me out. First, who is your ISP( Internet Service Provider, i.e. Comcast, AT&T, Verizon, ect.)? Second, who is the maker of your router? Lastly, what is the model number and firmware version of your router?
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

What are rules of etiquette for this forum?

I have posted a few basic questions in recent times about java programming issues. Right now I am using JBuilder2005. I am relatively new to the Java progarmming community, and I don't know if JB2005 is considered evil over say, WebSphere, Eclipse, etc. But responses I have received for my basic questions (which I ended up finding my own answers to) have been less than friendly.
Case:
>>
Re: assing which servlet is the startup page? Author: IanSchneider Mar 11, 2005 3:54 PM (reply 1 of 1)
You gots to be crazy if you think I'm helping you with your assing. Whats JB2005 anyway? Whatever it is, it sounds like its an impediment to you knowing whats going on. Try looking in your web.xml and actually understanding how servlets work.
<<
I have received responses similar to this for other posts where people are conscientiously steering me in the wrong direction. Well, I am not posting to ruffle any feathers, but since I have not seen any specific rules on what to post/not post other than no disruptive stuff, my question is if this forum is like a Pay forum and/or an anti Borland forum (vs a forum for exchanging information on Java programming).
While I'm at it I am trying to use a DataExpress control from JB2005 to connect to an Access Database (for practice - we have Oracle but I am practicing on Access). I select the driver
sun.jdbc.odbc.JdbcOdbcDriver
then it asks for the URL, it gives me this option in the ...:
jdbc:odbc:MS Access Database
so where do I add the location of the mdb file? I can't get the control to connect. I can connect to Access if I just use code and read/insert rows of data, but I want to use a DataExpress TableDataSet control so I can load it up with rows of data from a database file in a client application. I can load up an html table of data in a servlet for display . But how can I display data the same way in a client app?
Is this forum even the correct forum for me to ask this question - or should I look for a Borland forum?
Thanks.

I have posted a few basic questions in recent times
about java programming issues. Right now I am using
JBuilder2005. I am relatively new to the Java
progarmming community, and I don't know if JB2005 is
considered evil over say, WebSphere, Eclipse, etc.
But responses I have received for my basic questions
s (which I ended up finding my own answers to) have
been less than friendly.I don't think people care for your brand of IDE (I'm using both JBuilder 2005 and Eclipse). People might be wary of newbies using any IDE, as they're usually in over their heads.
You gots to be crazy if you think I'm helping you
with your assing. Whats JB2005 anyway? Whatever it
is, it sounds like its an impediment to you knowing
whats going on. Try looking in your web.xml and
actually understanding how servlets work.Obvious: you posted a homework assignment, and people kicked your butt. And I guess Ian just didn't recognize "JB2005" means JBuilder 2005. I wouldn't say it's his fault.
I have received responses similar to this for other
posts where people are conscientiously steering me in
the wrong direction.Didn't happen in the above case.
Well, I am not posting to
ruffle any feathers, but since I have not seen any
specific rules on what to post/not post other than no
disruptive stuff, my question is if this forum is
like a Pay forum and/or an anti Borland forum (vs aNeither. But I urge you to read the following link:
http://www.catb.org/~esr/faqs/smart-questions.html
It's not at all about the etiquette for this forum, but for fora in general.
then it asks for the URL, it gives me this option in
the ...:
jdbc:odbc:MS Access Database
so where do I add the location of the mdb file? IYou don't. That's a mapping provided by the OS. Go to "System Controls" -> "Data Sources (ODBC)" or search the help for it if you don't find it, and set up the Access driver.

SOAP channels in rwb showing error "No Adapters registered for this channel

SOAP channels in rwb is showing error "No Adapters registered for this channel",
what is the problem?
i tried to locate and restart the SOAP adapter from Visual admin, but couldnt find it in visual admin, pls help in locating it in visual admin

Hi,
In Visual Admin, Cluster tab --> Server -> Services -> Deploy --> Radiobutton Application
--> sap.com/com.sap.aii.af.soapadapter --> Press start / stop
This way youmay restart the SOAP adapter.
Also Please check if there is any cahce problem, Try to refresh it. & SAP Note- 856597
Thanks
Swarup

SOAP : No adapter registered for this channel

hello everybody,
i'm working with a PI 7.1
i have a interface RFC - PI - SOAP.
when i look on Communication Channel Monitor i see this error on my soap CC
No adapter registered for this channel
i restart J2ee and applicate CPA cache refresh.
i tryed to create a new soap cc but no result. still to have this problem.
Any suggestion?
thanks
Alex

HI Alex,
Edit the channel and do some dummy changes and activate again. also go to ID -> Menu Environment -> Clear SLD Data Cache. Also check the cache notifications.
Then perform CPACache refresh using PIDIRUSER and this url.
http://XIHost:JavaPort/CPACache/refresh?mode=delta
http://XIHost:JavaPort/CPACache/refresh?mode=full
If this does not work then you may check Visual Admin -> Soap Adapter service and restart it....
Thanks,
Naveen

No adapter registered for this channel FOR JDBC COMM CHANNEL

Hi Friends,
We installed JDBC driver(for Oracle) and it works correctly from Visual Administrator.
We have created comm channel 'jdbc_receiver'.
However, when we check in "Adapter Monitoring", it is not active (Green color) and short text says 'No adapter registered for this channel'. Where should we look further to resolve the issue ? How do we test this comm channel from XI box ?
Thanks.
Niranjan

Hi Niranjan,
How you solved the problem?
I have deployed JDBC driver (sqljdbc4.jar) according tohttp://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00b4a020-4ae6-2c10-5a95-fed4ad9a4b60?QuickLink=index&… .
Driver deployed successfully and I have checked it in folder \usr\sap\xxx\DVEBMGS30\j2ee\cluster\bin\ext\com.sap.aii.adapter.lib\lib and it's found ok. But this adapter type not showing in Communication Channel only RFC and SOAP are showing there. I have restarted the server also.

Trying to register for WIFI

I'm trying to register for free wifi. I'm a BT Broadband customer who joined around mid September 2013. I've downloaded the app to my Galaxy tablet but when i try and login using my e mail i get the message that this user name is not sa primary e mail - not sure I reallly understand! It is my primary e mail and I have no other BT ID. Please could someone advise me?
Thanks
lyn
Solved!
Go to Solution.

Have you used this link to register
https://www.bt.com/wifi/secure/optin.do?s_cid=con_FURL_btfon/optin
and this link to check your status
https://www.bt.com/wifi/secure/status.do;jsessionid=yNnFThkJrwnbf0t7Qh4Qy4l0Y1CJlrvf1h9pHvC8N2v7N26J...
and have you got a BTID
https://www.bt.com/reg/consumer/displayPage.do;jsessionid=yNnFThkJrwnbf0t7Qh4Qy4l0Y1CJlrvf1h9pHvC8N2...
You should use your primary email address to log on. It is not your BTID unless you have made your BTID the same as your email address and password. The primary email address is the one which BT gave you when you first signed up. It is usually sent to you and will be something like [email protected]

RSS Feed for this forum

Hi,
I am connected to the RSS feed of this forum and the feed is sending only the first line of the text entered. So most of the times I get something like Hello, or Hi , and I don't have at least the few first lines.
Would it be possible to change the feed to add more lines ?
Oracle Application Express (APEX)
Thanks
Francis.

Anyone know how to setup to actualy post. I have tried quite a few options in Outlook Express but keep getting this error. I have put in my email address I use here, [email protected] Server adobeforums.com username agent86oz (and [email protected]) and my password.
Outlook Express could not post your message. Subject 'Re: RSS Feed For This Forum?', Account: 'adobeforums.com', Server: 'adobeforums.com', Protocol: NNTP, Server Response: '482 authentication rejected', Port: 119, Secure(SSL): No, Server Error: 482, Error Number: 0x800CCC17

Firefox search plugin for this forum

Hey!
I made a Firefox search plugin for this forum:
http://cip.uni-trier.de/zaplatynski/moz-search/
I am just too lazy for the two clicks to get the search form!
Note: The installation instructions apply just for the Uni Trier search plugins... I need there a redirection page.
I hope it will be usefull for everyone. I plan to make one for the AUR too.
So long,
Marian
P.S. If I get some time, I will make a nicer icon...

Finally, I made it available:
http://cip.uni-trier.de/zaplatynski/moz … linux.html
Reviewed all search plugins by others and adapted them if needed.
Please post any comments bugs. I will do some plugins for google in the next time.
Greetings,
Marian

How to change email address login for this forum

I no longer have the email address I use for this forum and was wondering how to change it if possible?

One of these links should help you:
http://www.info.apple.com/support/howtoid.html
Apple ID Assistance Form/Feedback

I'm trying to register for an iCloud account with my apple ID but it's telling me it needs to be an email address. I try and amend my username so it's the same as my email address but nothing happens! HELP?!

Hi - I'm trying to register for an iCloud account (I've just had a baby and am terrified I'm going to lose all my photos of him!) but when I try and register, it tells me it needs an email address so I go to edit my username and try and amend it so my email address and username are the same thing but nothing is happening. I keep going round in circles - can someone help?!

Where are you trying to amend your username?
It should be done at http://appleid.apple.com/

SuccessFactors adapter "No adapter registered for this channel" issue

Hi Experts,
Scenario - SAP PO 7.4
Success Factor -> (SFSF Adaptor) PO (File Adaptor) -> File Share on PO server (Folder Name: SFSF/SFReceiver)
I am getting "No adapter registered for this channel" in the communication channel monitor.
Appreciate your help.
Srinu

Hi Srinivasulu,
Please can you go to NWA and have a look under Application Resources: Overview.
Search for the SuccessFactors adapter and make sure that the status on it is green.
This will always tell you if it was installed successfully.
Regards,
Jannus Botha

RWB - No adapter registered for this channel (JDBC)

Hi Experts,
All my JDBC communication channels have the following log in RWB:
No adapter registered for this channel
When executing an interface, SXMB_MONI shows:
Object not found in lookup of SapXIJDBCAdapterService
We have aready performed a CPACache refresh as mentioned on another threads but the problem persists.
I performed dummy changes in the CC and even created a new one but the log still remains the same.
Please advise what else can be done to solve the issue. We are using PI 7.1.
Regards,
Daniela

Hello,
Try checking in the Netweaver Administrator if the JDBC service is running?
There is also a dependency of modules in between the SapXIJDBCAdapterService and SapXIFileAdapterService. Please check that the File Adapter service is started also.
Regards,
Sarah

Severe test trying to register for this forum...

Similar Messages

Maybe you are looking for