Sf 300

Dear's friend
I have struck in my some network configuration. I have two sf300 switches and cisco 827 router. Actually sf300 does not support dhcp server. I took cisco 827 as dhcp server and i create 4 dhcp pools in it.
How i can configure in sf300 to take dhcp service from cisco router 827. Isit possible to configure 827 with bvi interface, when i was try i got below error. Can anyone help me to configure bvi interface and i will link that bvi to vlan on sf300.
error in 827 router
Router(config-subif)#bridge-group 1
Bridging on a LAN subinterface requires that the interface be already
configured for Inter Switch Link (ISL) encapsulation or 802.1Q encapsulation
sf300 Configuration:
Int vlan 1
ip address 192.168.1.1 255.255.255.0
int vlan 2
ip address 192.168.2.1 255.255.255.0
int vlan 3
ip address 192.168.3.1 255.255.255.0
int vlan 4
ip address 192.168.4.1 255.255.255.0
How i can connect two sf300 switch for redundancy ? I connected giga4 SW1 and giga4 SW2 and mode trunk isit good or any other way i need to connect it.?
thanks in advance.

Tom still i have same problem.
See the below configuration of my switch
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2013.02.18 19:31:07 =~=~=~=~=~=~=~=~=~=~=~=
sh r
SW2(config)#$                                                 sh run
% Unrecognized command
SW2(config)#do sh run
config-file-header
SW2
v1.2.7.76 / R750_NIK_1_2_584_002
CLI v1.0
file SSD indicator encrypted
ssd-control-start
ssd config
ssd file passphrase control unrestricted
no ssd file integrity control
ssd-control-end cb0a3fdb1f3a1af4e4430033719968c0
vlan database
vlan 2-7
exit
voice vlan id 5
voice vlan oui-table add 0001e3 Siemens_AG_phone________
voice vlan oui-table add 00036b Cisco_phone_____________
voice vlan oui-table add 00096e Avaya___________________
voice vlan oui-table add 000fe2 H3C_Aolynk______________
voice vlan oui-table add 0060b9 Philips_and_NEC_AG_phone
voice vlan oui-table add 00d01e Pingtel_phone___________
More: , Quit: q or CTRL+Z, One line:
voice vlan oui-table add 00e075 Polycom/Veritel_phone___
voice vlan oui-table add 00e0bb 3Com_phone______________
ip dhcp relay address 10.1.6.252
ip dhcp relay enable
ip dhcp information option
bonjour interface range vlan 1
hostname SW2
interface vlan 1
no ip address dhcp
interface vlan 2
name " VLAN_2"
ip address 10.1.2.1 255.255.255.0
ip dhcp relay enable
interface vlan 3
name "VLAN_3"
ip address 10.1.3.1 255.255.255.0
ip dhcp relay enable
interface vlan 4
name "VLAN_4"
ip address 10.1.4.1 255.255.255.0
ip dhcp relay enable
interface vlan 5
name "IP Telephony VLAN"
ip address 10.1.5.1 255.255.255.0
ip dhcp relay enable
interface vlan 6
name "Switches VLAN"
ip address 10.1.6.1 255.255.255.0
ip dhcp relay enable
interface vlan 7
name "Master VLAN"
ip address 10.1.7.1 255.255.255.0
ip dhcp relay enable
interface fastethernet1
switchport mode access
interface fastethernet2
switchport mode access
interface fastethernet3
switchport mode access
interface fastethernet4
switchport mode access
interface fastethernet5
switchport mode access
interface fastethernet6
switchport mode access
interface fastethernet7
switchport mode access
interface fastethernet8
switchport mode access
interface fastethernet9
switchport mode access
switchport access vlan 2
interface fastethernet10
switchport mode access
switchport access vlan 2
interface fastethernet11
switchport mode access
switchport access vlan 2
interface fastethernet12
switchport mode access
switchport access vlan 2
interface fastethernet13
switchport mode access
switchport access vlan 2
interface fastethernet14
switchport mode access
switchport access vlan 3
interface fastethernet15
switchport mode access
switchport access vlan 3
interface fastethernet16
switchport mode access
switchport access vlan 3
interface fastethernet17
switchport mode access
switchport access vlan 3
interface fastethernet18
switchport mode access
switchport access vlan 4
interface fastethernet19
switchport mode access
switchport access vlan 4
interface fastethernet20
switchport mode access
switchport access vlan 4
interface fastethernet21
switchport mode access
switchport access vlan 4
interface fastethernet22
switchport mode access
switchport access vlan 4
interface fastethernet23
switchport mode access
switchport access vlan 4
interface fastethernet24
switchport mode access
switchport access vlan 4
interface fastethernet25
switchport mode access
switchport access vlan 4
interface fastethernet26
switchport mode access
switchport access vlan 4
interface fastethernet27
switchport mode access
switchport access vlan 4
interface fastethernet28
switchport mode access
switchport access vlan 5
interface fastethernet29
switchport mode access
switchport access vlan 5
interface fastethernet30
switchport mode access
switchport access vlan 5
interface fastethernet31
switchport mode access
switchport access vlan 5
interface fastethernet32
switchport mode access
switchport access vlan 5
interface fastethernet33
switchport mode access
switchport access vlan 5
interface fastethernet34
switchport mode access
switchport access vlan 5
interface fastethernet35
switchport mode access
switchport access vlan 5
interface fastethernet36
switchport mode access
switchport access vlan 5
interface fastethernet37
switchport mode access
switchport access vlan 5
interface fastethernet38
switchport mode access
switchport access vlan 5
interface fastethernet39
switchport mode access
switchport access vlan 5
interface fastethernet40
switchport mode access
switchport access vlan 5
interface fastethernet41
switchport mode access
switchport access vlan 5
interface fastethernet42
switchport mode access
switchport access vlan 5
interface fastethernet43
switchport mode access
switchport access vlan 5
interface fastethernet44
switchport mode access
switchport access vlan 5
interface fastethernet45
switchport mode access
switchport access vlan 5
interface fastethernet46
switchport mode access
switchport access vlan 5
interface fastethernet47
switchport mode access
switchport access vlan 7
interface fastethernet48
switchport mode access
switchport access vlan 6
interface gigabitethernet4
switchport trunk allowed vlan add 2-7
Description Connection To SW1
SW2(config)#

Similar Messages

LaserJet Pro 300 M351A Wireless Accessory?

On the HP website it clearly states that my printer (HP LaserJet Pro 300 color M351) DOES have a "wireless capability" ...
This statement is to be found under the "Technical Details" section in the paragraph entitled "Connectivity and Communications":
Wireless capability - Optional, enabled with purchase of a hardware accessory
I've Googled high and low and I cannot find out:
What is meant by "a hardware accessory"
Is it a print server device? Is it a wireless usb adapter? What?
I have an urgent need to add this device to a small wirless network, but I can't figure oyt how to?
Please help - anyone?

Hi,
Wireless optionality is available with the HP Jetdirect ew2500 802.11b/g Wireless Print Server (J8021A), that can be found listed within the Supplies and Accessories section below:
http://www8.hp.com/emea_middle_east/en/products/printers/product-detail.html?oid=4346029&jumpid=oc_r...
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

ID5.5 image dpi cut from 300 to 150 in save as ps, acrobat to pdf

When I submitted book interior to printer, they said some images were 150 dpi. I checked the ID file links, and they showed them as 300 dpi. My process to pdf was: from ID, save as postscript file, then use Acrobat Pro with the PDFx1a2001 profile to create the pdf. Any thoughts on where in this process the images would be downgraded to 150 dpi? Here is the file as ID shows it:
Thanks for any suggestions.

Not really.
http://www1.lightningsource.com/ops/files/pod/LSI_FileCreationGuide.pdf
Take care, Mike

Todos os mais de 300 dolares de aplicativos comprados anteriormente na App Store, sumiram quando tive que redefinir minha senha, tive que formatar o computador e nao tenho backup, o que fazer?

A cerca de 1 ano adquiri um Iphone 4 e um Ipad 1, durante cerca de 8 meses comprei mais de 300 dolares de aplicativos na Apple Store.
Ocorre que vendi este Iphone e o Ipad em questao, mas mesmo aswsim tive o cuidado de desinstalar os aplicativos para poder reinstala-los em outro equipamento caso fosse necessário.
Neste intervalo de tempo, ocorreu um problema no meu computador pessoal e tive que formatar a maquina perdendo o backup feito por meio do Itunes, recentemente comprei um Iphone 4S desbloqueado de fabrica e fui obrigado a redefinir minha senha na Apple Store uma vez que sequer lembrava dela.
Ao entrar no site pelo Itunes, minha surpresa foi que todos os aplicativos comprados anteriormente não constavam na sessão (minhas compras) estando apenas os adquiridos a partir de entao.
Como devo fazer para não perder mais de 300 dolares gastos em apolicativos lá?? Como reaver os aplicativos comprados?

Por favor, perceber que este é um usuário fórum de usuários. Estamos todos os usuários de produtos da Apple como você. Se você teve dificuldade com a Apple os serviços de tecnologia, então você precisa falar com alguém mais acima na cadeia como umrepresentante do cliente. Ter todos os seus fatos, mas ser breve. Uma história com longas tiradas é tedioso.

How do I take 300 dpi photos with my iPhone 4s? And how do I export them to my MacBook Pro at 300 dpi to use as I want to print photos.

How do I take 300 dpi photos with my iPhone 4s?
And how do I export them to my MacBook Pro at 300 dpi to use as I want to print photos.
I have been using the standard camera on the iPhone and require 300 dpi to create photo books as the photos are resized according the layout.
Your time and assistance in appreciated.
Thanks

Thanks Tonefox!
After looking at a few of the links I found a mathematical equation that assisted me.
Inches = Pixels/DPI
eg: 3 inches = 300 pixels/100 DPI
Using this equation and the fact that iPhone 4s takes photos that are 3264 x 2448 I was able to work out the largest print I could make with 300 DPI.
Width 3264 pix/ 300 DPI = 10.88 inches
Height 2448 pix/ 300 DPI = 8.16 inches
Therefore, the largest print (with 300DPI) I can make of these photos is 10.88 inches x 8.16 inches.
Which is great!
So is it critical for me to change the dpi in say photoshop or does it not matter as long as I don't go above the 10.88 inches x 8.16 inches?
From what I can gather the smaller I resize the photo the higher the DPI and the bigger I stretch the photo the lower the DPI?
Further clarification will be much appreciated. Thanks

HT4910 i save my photos to camera roll. then back up but can't see it on icloud. why? we just lost 300 photos on my other iphone because we do not get proper help. that's why i need to learn now.

i save my photos to camera roll. then back up but can't see it on icloud. why? we just lost 300 photos on my other iphone because we do not get proper help. that's why i need to learn now.

You can't view your back up files at icloud.com.
You can't view your camera roll and you can't view your Photo Stream files at icloud.com.
The icloud back up plan allows you to "restore" your iOS device from the files you backed up at icloud.com.

Getting a hp mce remote for touchsmart 300-1125

I want to add a remote control to my HP Touchsmart 300-1125 and am thinking to order the 5070-5600 HP remote (random link: http://cgi.ebay.com/HP-COMPAQ-5070-5600-Media-Center-Remote-Control-/330414657906#ht_805wt_911).
I wonder about two things:
1) The IR Receiver *is* built-in, isn't it? (Device Manager lists a functional eHome IR device)
If in doubt, where should I look for the IR receiver sensor on the case?
2) I think the 5070-5600 remote lists as being made for the older IQ series of Touchsmarts. Will it work with the newer 300 series?
Thanks
Mike
This question was solved.
View Solution.

All MCE remotes from the past 8 years send out the same codes. There are a few newer HP specific codes, but 95% of the buttons are exactly the same, grab a 5 year old Gateway MCE remote, it'll work just the same as a new HP one!

Envy 120 cartridges. HP 300 or HP 60?

Dear Support,
Few months ago I bought a new HP Envy 120 All-in-one-printer and I'm happy with it. Now the print cartridges are quite out so I'm preparing to buy a replacement.
I really don't know what is the correct code. That is: if I go to printer webpage, Tools, Product Information, Print Gauge, I see that the part number for cartridges is HP 300. Then I click the link "Order supply" (..Sureidentifier will identify the printer for you), but the supply is not identified (the search engine of suresupply doesn't even recognize "HP 300"). If I search for "Envy 120", the suggested replacement is HP 60.
Which is correct? HP 300 or HP 60?
What about region limitations? I bought the printer from Amazon, I don't know where it really comes from.
Thanks in advance.
This question was solved.
View Solution.

Hi Mario,
If the printer provided with the 60 ink cartridges, it is only intended to accept those cartridges for America.
The 300 ink cartridges are intended for the same printer but for Europe.
If you moved to another country in Europe you should contact the local HP Support in order to reset yoru pritner to acept those cartridges.
Please let me know what region you are from so it will be possible to provide you the local contact details for a such.
Regards and happy new year
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

I had 800 songs on my iPhone. My iPhone dumped all my songs and when I tried to re-sync my music it told me I was only authorized 300 of the 800 songs.

I had 800+ songs on my iphone when tonight my iphone decided to dump all of my music. I tried to sync all of my music back onto my iphone and it told me I was only authorized 300 of my songs. All of the songs came from the same macbook in the first place, why the **** won't they all sync now? There's been no change or variation except my iphone dumping songs. How the **** am I not authorized? I paid for all of them! I'm seriously getting tired of apple's overpriced junk. It never works right that and nothing but screws up and screws us as consumers.

I was doing dishes and listening to music on my phone. I tried to change the song and all the music was gone. Then when I plugged it into my macbook to resync it all it told me I'm not authorized all of the songs. It would only sync 300 of the 800 on my itunes that are on my macbook. And it's been the same macbook and same itunes account all along. Never changed. That's why I'm confused. I paid for all this music and now I just don't have it anymore cause they say so... Also, this isn't the first time my iphone has dumped all my music, it's happened twice before, but let me sync all my music back onto it the other two times.

Dont work driver on Scanner ScanJet 300 on winows 7

Please, create new drivers for Scanner ScanJet 300 on Windows 7 platform. I have this divace. Dont work it on Windows 7. Windows 7 and drivers of ScanJet 300 scanner are not complianted.

Hi @Per-Morten
I suspect your question would be better answered in the HP Enterprise Business Community, as your HP Printer is a commercial model.
My technical expertise is with consumer products and software, I am sure the commercial folks would be happy to help if you re-post your question for them to answer. The HP Enterprise Business Community is an HP Forum designed for the Commercial and Enterprise customers to help one another. I am sure you will find some HP folks there to help too.
Click here to view the Printing and Digital Imaging. When the page opens you will see the option to 'Log in' or 'Register Now' on the right. The commercial forums are separate from the consumer boards, thus you will need to register if you don't already have a commercial account.
You may find the HP Scanjet 5400c Scanner Drivers page helpful while you wait for somebody in the commercial Forum to respond to your inquiry.
Best of luck.
- In support of Movember
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

How to insert 300 data from associative array to backend table in PL/SQL

HI ALL,
I'm posting my code here:
Creating back end table:
Create table orlando
( id number(20),
calltype number(12),
     gateway_name varchar2(25),
     accounting_id varchar2(18),
     start_time_system_ticks number(11),
     node_time_zone      varchar2(25),
     start_date varchar2(10),
     start_time varchar2(10),
     softswitch_response number(11),
     alerting number(11)
Creating package:
CREATE OR REPLACE PACKAGE r IS
type apollo_rec is record(
id number(20),
calltype number(12),
     gateway_name varchar2(25),
     accounting_id varchar2(18),
     start_time_system_ticks number(11),
     node_time_zone      varchar2(25),
     start_date varchar2(10),
     start_time varchar2(10),
     softswitch_response number(11),
     alerting number(11)
TYPE bin_array IS TABLE OF apollo_rec INDEX BY BINARY_INTEGER;
PROCEDURE rr (state_array bin_array);
END ;
SET SERVEROUT ON
CREATE OR REPLACE PACKAGE BODY r IS
PROCEDURE rr (state_array bin_array) IS
BEGIN
FOR i IN 1 .. state_array.COUNT LOOP
INSERT INTO orlando(id,calltype,gateway_name,accounting_id,start_time_system_ticks)VALUES(state_array(i).id,state_array(i).calltype,state_array(i).gateway_name,
state_array(i).accounting_id,state_array(i).start_time_system_ticks);
COMMIT;
END LOOP;
END ;
END ;
I've run this code in i*SQL PLUS.But when I run this code for 5 entries there is no error but when I modify the insert statement for 300 entries(300 identifiers in the insert statement)
it gives me error:
Warning: Package Body created with compilation errors.
Errors for PACKAGE BODY R:
LINE/COL      ERROR
7/2      PL/SQL: SQL Statement ignored
7/14      PL/SQL: ORA-00913: too many values
Is there any feature in PL/SQL to decrease the entries in insert statement and make the insert statement along with the program small and increase the program performance.
Edited by: 983040 on Jan 20, 2013 11:11 PM

Basic example (ran on 11.2.0.3):
SQL> create table testtab( id number, day date, val varchar2(30) );
Table created.
SQL>
SQL> create or replace package TestTabLib as
2
3          type TTestTab is table of testtab%rowtype;
4
5          procedure InsertRows( rowArray TTestTab );
6
7 end;
8 /
Package created.
SQL>
SQL> create or replace package body TestTabLib as
2
3          procedure InsertRows( rowArray TTestTab ) is
4          begin
5                  forall i in 1..rowArray.Count
6                          insert into testtab values rowArray(i);
7          end;
8
9 end;
10 /
Package body created.
SQL>
SQL> declare
2          rowArray        TestTabLib.TTestTab;
3 begin
4          --// populating the array - using a bulk fetch as
5          --// an example
6          select
7                  object_id, created, object_name
8                          bulk collect into
9                  rowArray
10          from    all_objects
11          where   rownum < 11;
12
13          --// bulk insert array
14          TestTabLib.InsertRows( rowArray );
15 end;
16 /
PL/SQL procedure successfully completed.
SQL>
SQL> select * from testtab;
        ID DAY                 VAL
       100 2011/12/05 09:16:03 ORA$BASE
       116 2011/12/05 09:16:04 DUAL
       117 2011/12/05 09:16:04 DUAL
       280 2011/12/05 09:19:09 MAP_OBJECT
       365 2011/12/05 09:19:10 SYSTEM_PRIVILEGE_MAP
       367 2011/12/05 09:19:10 SYSTEM_PRIVILEGE_MAP
       368 2011/12/05 09:19:10 TABLE_PRIVILEGE_MAP
       370 2011/12/05 09:19:11 TABLE_PRIVILEGE_MAP
       371 2011/12/05 09:19:11 STMT_AUDIT_OPTION_MAP
       373 2011/12/05 09:19:11 STMT_AUDIT_OPTION_MAP
10 rows selected.
SQL>
SQL> declare
2          rowArray        TestTabLib.TTestTab;
3 begin
4          --// populating the array - using a custom build
5          --// loop example such as a Java front-end will
6          --// use reading data from user input form
7          rowArray := new TestTabLib.TTestTab();
8          rowArray.Extend(2);     --// user entered 2 values
9          for i in 1..rowArray.Count loop
10                  rowArray(i).id := i;
11                  rowArray(i).day := trunc(sysdate);
12                  rowArray(i).val := 'value '||to_char(i,'000');
13          end loop;
14
15          --// bulk insert array
16          TestTabLib.InsertRows( rowArray );
17 end;
18 /
PL/SQL procedure successfully completed.
SQL>
SQL> select * from testtab where val like 'value%';
        ID DAY                 VAL
         1 2013/01/21 00:00:00 value 001
         2 2013/01/21 00:00:00 value 002
SQL>

How to get more than 300 results for a search

Hi all,
When we search for something in a peoplesoft, we get 300 default results right.
Is there a way we can change that to 500 or 600 or any.
Please help me.
Thank you,
Bye.

I heard that we have to do some settings in psappserv.cfg file to get more than 300 rows in a search. Is that true?
Please help me.
Thank you,
Bye.

My ipod wont let me put more then around 300 songs on it.

I had dropped my iPod with a case on, and picked it up and it was fine. It still runs fine and all, but when I try to put songs on it from my iTunes, it only puts on around 300 and then iTunes freezes and wont let me put anymore on. I have tried with a couple computers, so its not iTunes thats the problem. Anyone know how to fix this?

It could be an indication that the hard drive was damaged during the fall. I would recommend doing a disk diagnostic on the iPod's HD using the instructions given by turingtest2 in this older thread. He also covers what the resulting numbers indicate. From there we can try to determine if the iPod has any life left or if it's time to bite the bullet.
https://discussions.apple.com/thread/3784647?start=0&tstart=0
B-rock

G3/300 B&W Dual Display issues

I'm attempting to hook a second monitor to my machine. The primary monitor is an Apple Studio Display 17" CRT. I'd like to hook a second VGA monitor up. I put in a second ATI Rage card, and haven't yet gotten it to work. Here's the info from system profiler on the card I've put in:
Under PCI Cards:
pci1002,80:
Type: VGA-Compatible Controller
Bus: PCI
Slot: J11
Vendor ID: 0x1002
Device ID: 0x4750
Subsystem Vendor ID: 0x1002
Subsystem ID: 0x0080
Revision ID: 0x005c
Under Extensions:
ATIRagePro:
Version: 1.4.4
Last Modified: 3/26/05 5:29 PM
Get Info String: ATIRagePro 1.4.4.2 (3166)
Location: /System/Library/Extensions/ATIRagePro.kext
kext Version: 4.0.4
Load Address: 0x26efc000
Valid: Yes
Authentic: Yes
Dependencies: Satisfied
Integrity: Correct
I'm running 10.4.9, and can't seem to figure this one out. Any thoughts?
G3 B&W 300 Mac OS X (10.4.9) 768MB RAM/100GB/Airport Extreme

Phirefenix,
Welcome to the discussions. First question: are you sure it is a Mac compatible video card? If not, the second comment will not work.
During startup, after the studio display lights up but before the software starts to load, hit the reset button on the front of the computer. This will give what I call a 'warm boot' and eliminate some esoteric issues. If that works, buy a new PRAM battery. If that does not work, verify question one.
Ji˜m

When I try to connect my iPhone to my laptop to import photos and videos it says there are no files or folders under "Apple Iphone". My laptop recognises my phone and my camera roll has around 300 photos and videos but none of them come up on my laptop?

The memory on my Phone is really bad so i cant store much. The pictures i am trying to import are really important and i cant lose them. My phone has been playing up a lot and im afraid of losing the pictures so tried to import them onto my laptop. Its a windows 8 and every time i connect my iphone a window automatically opens titled "Apple iphone" but underneath it says "no files or folders". How can i resolve this?
Also the apple store have told me not updating may be causing problems but i cant update due to no space. i have 3 apps, around 300 photos/videos and no music. it is 16gb so i dont know why im having this problem

This is how you import photos/videos:
http://support.apple.com/kb/HT4083
Is that what you're doing?

Macbook Air running extremely slow - kernel_task at 300% cpu usage

I purchased my Macbook Air roughly 15 months ago and it's performance has constantly been impressive since I purchased it - until roughly a fortnight ago. I came home from work one afternoon and it was running at a snails pace. I had recently upgraded to Yosemite though I'm unsure if this had anything to do with it. I had also recently installed FitBit software to sync to my new FitBit flex.
It has continued to run in this manner constantly since the problem began. It is ridiculously slow, every single request takes a very long time to respond. Logging in takes forever. When I click on an app to open it, the icon bounces for 30 seconds or more, and it's not a smooth bounce either, it's quite a jagged bounce!
I'm hoping someone is able to provide some advice, guidance or help. The laptop is no longer covered by the 12 month Manufacturer Warranty, and I did not purchase an Apple Care plan as no Apple product I've owned before has experienced issues like this.
This whole experience is killing me! I'm suspecting hardware failure and I'm just so sad that this could happen to the laptop I've loved so much since I bought it!
The problem:
The kernel_task process is constantly running at 300% or higher cpu usage, with Activity Monitor indicating the processor is being maxed out by a system task. Also, the laptop's fan is constantly running at full capacity - from the moment the laptop turns on, or wakes up.
What I think the problem might be:
As a result of many, many Google searches, it appears that this behaviour may be due to the Macbook Air thinking it is overheating - and I will clarify here that it certainly is not. It is cool to touch, always, when this problem occurs. (yet the fan is almost taking off!). As a result of the MacBook Air thinking it's overheating, it not only is running the fan at a very high RPM (confirmed with iStat), but it also is intentionally choking the system with 'simple requests' in attempt to cool the computer down. Apparently this is a built-in feature of OS X. The kernel has priority over user tasks, causing all user tasks to be granted a lower priority, causing the computer to run INCREDIBLY SLOW. Even as I'm typing this, I'm about two sentences ahead of what is showing on the screen!
Steps I have taken:
- Read widely across the internet with every possible relevant search term I can think of
- Downloaded iStat to see if any of the temperatures are too high (they all seemed fine..)
- Disabled Bluetooth and Wifi. (no change)
- Reset SMC (multiple times.., no change)
- Reset PRAM (multiple times.., no change)
- Drained the battery completely (2 or 3 times, no change)
- Install Windows 7 on BootCamp in attempt to bypass the issue (CPU usage was 100% constantly in Windows also)
- Uninstalled FitBit software (no change..)
- Uninstalled other software I did not need (no change..)
- Attempt to boot into Safe Mode / Recovery Mode (even in this modes, the same thing is happening)
- Repaired Disk Permissions
- Backed up all personal data
- Used the built-in Internet Recovery mode to format my Macintosh HD and re-install a fresh copy of OS X (Mountain Lion). (no change…)
- Re-upgrade to Yosemite (no change..)
I've downloaded EtreCheck and here is the output:
Problem description:
OS X is running incredibly slow. kernel_task process is constantly using 300% and upward CPU usage.
EtreCheck version: 2.1.5 (108)
Report generated 20 December 2014 3:38:49 PM AEST
Click the [Support] links for help with non-Apple products.
Click the [Details] links for more information about that line.
Click the [Adware] links for help removing adware.
Hardware Information: ℹ️
MacBook Air (11-inch, Mid 2013) (Verified)
MacBook Air - model: MacBookAir6,1
1 1.3 GHz Intel Core i5 CPU: 2-core
4 GB RAM
BANK 0/DIMM0
2 GB DDR3 1600 MHz ok
BANK 1/DIMM0
2 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en0: 802.11 a/b/g/n/ac
Video Information: ℹ️
Intel HD Graphics 5000 - VRAM: 1024 MB
Color LCD 1366 x 768
System Software: ℹ️
OS X 10.8.5 (12F45) - Uptime: 1:24:6
Disk Information: ℹ️
APPLE SSD SD0128F disk0 : (121.33 GB)
disk0s1 (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / : 120.47 GB (106.42 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
USB Information: ℹ️
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
User Login Items: ℹ️
uTorrent Application (/Applications/uTorrent.app)
Internet Plug-ins: ℹ️
QuickTime Plugin: Version: 7.7.1
JavaAppletPlugin: Version: 14.6.0 - SDK 10.8 Check version
3rd Party Preference Panes: ℹ️
None
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
      17% WebProcess
      16% storeagent
      15% Safari
      9% WindowServer
      9% repair_packages
Top Processes by Memory: ℹ️
404 MB repair_packages
395 MB WebProcess
129 MB Safari
86 MB App Store
64 MB Finder
Virtual Memory Information: ℹ️
1.77 GB Free RAM
1.76 GB Active RAM
140 MB Inactive RAM
623 MB Wired RAM
425 MB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Dec 13, 2014, 09:47:32 PM /Library/Logs/DiagnosticReports/Kernel_2014-12-13-214732_[redacted].panic [Details]
Dec 13, 2014, 08:31:50 PM /Library/Logs/DiagnosticReports/Kernel_2014-12-13-203150_[redacted].panic [Details]
Dec 13, 2014, 04:54:18 PM /Library/Logs/DiagnosticReports/Kernel_2014-12-13-165418_[redacted].panic [Details]
Dec 13, 2014, 07:05:03 AM /Library/Logs/DiagnosticReports/Kernel_2014-12-13-070503_[redacted].panic [Details]
Dec 20, 2014, 02:15:38 PM Self test - passed

Hi,
I have an update so I thought I would share in case any other users are experiencing a similar problem.
I made an appointment with the Genius Bar at the Apple Store.
I went in and they ran a thorough diagnostic check on my Macbook Air and determined that the sensors were indeed faulty - several were providing no information "No reading" instead of providing a temperature. Thus, the Air was unaware of the temperature across multiple components.
Despite the laptop being outside the 12 Month Manufacturer Warranty, the Apple Store determined that it was covered under warranty through Australian Consumer Law - the laptop is now in for a complete repair under warranty at no cost to myself.
I couldn't be happier.

Sf 300

Similar Messages

Maybe you are looking for