SF300-24 DHCP Server not responding (worked once but not again)
Tried to get the new firmware DHCP Server option working but after turning it off and back on it doesn't seem to give any addresses anymore.
Anyone else having troubles or success actually using the SF300 v1.4 DHCP Server?
I even tried factory default reset but no luck.
When I did have it working everything was good but the older Cisco Meraki would not get an IP address so I had to revert to an older DHCP server. When I tried again today by turning the older server off and the SF300 back on, none of the Windows machines that previously would work would get an address.
Am running:
System Summary
System Information
System Operational Mode:
L2 Mode
System Description:
SF300-24 24-Port 10/100 Managed Switch
System Location:
Edit
System Contact:
Edit
Host Name:
switche2653d
Edit
System Object ID:
1.3.6.1.4.1.9.6.1.82.24.1
System Uptime:
0 day(s), 0 hr(s), 37 min(s) and 28 sec(s)
Current Time:
17:33:23;2014-Aug-06
Base MAC Address:
00:25:84:e2:xx:xx
Jumbo Frames:
Disabled
Software Information
Firmware Version (Active Image):
1.4.0.88
Firmware MD5 Checksum (Active Image):
66ab3618cb29023da5ce7c2177e6c3d4
Firmware Version (Non-active):
1.3.7.18
Firmware MD5 Checksum (Non-active):
1f59c2af2f50786e1a8a3146de42c867
Boot Version:
1.3.5.06
Boot MD5 Checksum:
da44c9c583e5a8a274f911c4d16f501e
Locale:
en-US
Language Version:
1.4.0.88
Language MD5 Checksum:
N/A
TCP/UDP Services Status
Edit
HTTP Service:
Enabled
HTTPS Service:
Enabled
SNMP Service:
Disabled
Telnet Service:
Disabled
SSH Service:
Disabled
Serial Number:
DNI15xxxxx
PID VID:
SRW224G4-K9 V01
Tried to get the new firmware DHCP Server option working but after turning it off and back on it doesn't seem to give any addresses anymore.
Anyone else having troubles or success actually using the SF300 v1.4 DHCP Server?
I even tried factory default reset but no luck.
When I did have it working everything was good but the older Cisco Meraki would not get an IP address so I had to revert to an older DHCP server. When I tried again today by turning the older server off and the SF300 back on, none of the Windows machines that previously would work would get an address.
Am running:
System Summary
System Information
System Operational Mode:
L2 Mode
System Description:
SF300-24 24-Port 10/100 Managed Switch
System Location:
Edit
System Contact:
Edit
Host Name:
switche2653d
Edit
System Object ID:
1.3.6.1.4.1.9.6.1.82.24.1
System Uptime:
0 day(s), 0 hr(s), 37 min(s) and 28 sec(s)
Current Time:
17:33:23;2014-Aug-06
Base MAC Address:
00:25:84:e2:xx:xx
Jumbo Frames:
Disabled
Software Information
Firmware Version (Active Image):
1.4.0.88
Firmware MD5 Checksum (Active Image):
66ab3618cb29023da5ce7c2177e6c3d4
Firmware Version (Non-active):
1.3.7.18
Firmware MD5 Checksum (Non-active):
1f59c2af2f50786e1a8a3146de42c867
Boot Version:
1.3.5.06
Boot MD5 Checksum:
da44c9c583e5a8a274f911c4d16f501e
Locale:
en-US
Language Version:
1.4.0.88
Language MD5 Checksum:
N/A
TCP/UDP Services Status
Edit
HTTP Service:
Enabled
HTTPS Service:
Enabled
SNMP Service:
Disabled
Telnet Service:
Disabled
SSH Service:
Disabled
Serial Number:
DNI15xxxxx
PID VID:
SRW224G4-K9 V01
Similar Messages
-
Link to tabbed panel works once, but not again
I have successfully linked from text in one tabbed panel to open another panel on the same page, using SpryURLUtils.js.
<a href="?tab=2#TabbedPanels1">
var TabbedPanels1 = new Spry.Widget.TabbedPanels("TabbedPanels1", {defaultTab: params.tab ? params.tab : 0});
When I return to the panel containing the link, the link no longer functions. So basically, it will work once, but not twice.
Thoughts on what's happening?The example that you gave is great for opening a tab in a new page.To open panels on the same page see here http://labs.adobe.com/technologies/spry/samples/tabbedpanels/tabbed_panel_sample.htm
Gramps -
- I changed a new case, battery and a headphone jack, after that iTunes didn't really wanna recognize my iPhone
- I've had the same problem earlier too, before ^that
- I have the latest version of iTunes
- I've tried to remove all USBs and reconnect iPhone many times, and rebooted both PC and phone
- I had the error 1611 while trying to restore on my PC -> I tried on another computer, worked
- my PC's iTunes recognized my iPhone once after restoring but not anymore
This is really annoying, I would be so thankful if you can help me.+ I have reinstalled my iTunes.
-
When my iPad is connected to the internet via WiFi I can pretty much browse without problems. However, there are certain instances where a web page is requested and I get, after a bit of time passes, “Safari could not open the page because the server stopped responding”. Repeated attempts to access these web pages via WiFi connection always yield the same results. However, if I turn off WiFi I can access the same pages almost instatntly via cellular connection. Any suggestions?
What is the URL which won't open?
-
Linked server problem, its works locally but not from remote machine
Hi,
i am using the application NAV and have written the query in the application. am using automation variable to link to the SQL Server.
The problem is that , the query which i have written executes only when i am working on local machine .
I mean when i want to execute the same query from remote machine through my app Dynamics NAV then its not getting executed.
Thanks in advanceDepends on what you are trying to do and what security you are using.
What error did you get?
If you are using windows authentication then take a look at delegation
http://www.databasejournal.com/features/mssql/article.php/3696506/Setting-Up-Delegation-for-Linked-Servers.htm
Regards, Ashwin Menon My Blog - http:\\sqllearnings.com -
Quadra 4000 and Lion worked once but not anymore
HI all
I just bought a new MacPro that came with Lion on it. I added a Nvidia Quadra 4000 to and it all worked just fine. Cuda picked it up and it worked fine with Adobe Premire 5 and Davinci Resolve.
I simply restarted my computer and now it's not regognising the card any more.
Does anyone have any suggestions please, it worked just fine and now after a restart it's not working at all.+ I have reinstalled my iTunes.
-
HT1386 I cant download a playlist from my itunes (PC) to my iPad it worked once but not anymore ?
I cant sync my playlist from itunes (pc) to my ipad ? It syncs drop box but nothing else
Hello JLHINC,
Thank you for using Apple Support Communities!
I have a few things to recommend here. First if you havent already, restart the iPhone and computer and try again.
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
Restarting your device
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider.
Press and hold the Sleep/Wake button until the Apple logo appears.
Next, if needed I would backup your device to iTunes and restore it.
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
Take care,
Sterling -
Installer works once, but never again
I created an installer using PackageMaker. This package installs my app bundle and a local copy of postgres 9.1.
I also created an uninstaller that runs the Postgresql un-installer script, removes my app bundle and uses pkgutil to "forget" the receipt.
The installation on the end user machine works if the app has never been installed.
Running the un-installer appears to remove all the necessary parts, include the .bom and .plist from the receipts db tree.
Running the installer again ends with an error:
PackageKit: Install Failed: PKG: pre-install scripts for "com.mycompany.myapplication.pkg"\nError Domain=PKInstallErrorDomain Code=112
Digging through the logs I uncovered one error: psql command not found. This was in the log for the script that add roles to dbms. Interestingly, the postgres installer succeeded. pgAdmin fires up and the basic postgres schema, etc., are present.
So why can't the installer script find psql on this second invocation?Hello Jnielsen,
If you have tried the 5 R's and the iPod is still not mounting in iTunes, there are several possibilities. Additional troubleshooting for most potential causes are described in this article:
http://support.apple.com/kb/TS1369?viewlocale=en_US
Before taking it back to the reseller, if you have the option to do so, test it on another computer.
Charles -
ATV2 woked once, but not again.
I have a new ATV2, HomeSharing worked the first time I turned it on, now it doesn't. I had the same problem last week before I switched to ATT U-Verse, but it's doing the same thing. Worked once, but not again. Any suggestions?
Sounds like there's something up with the local network
Have you had a look at this?
http://support.apple.com/kb/TS2972 -
BEFSR41 V3.0 - DHCP server periodically stops working; rest of functions ok
I have a BEFSR41 V3.0 latest firmware (1.0.5).
Sometimes the DHCP server will stop working. The rest of the functions are ok. I normally monitor the unit via PING and unfortunately, this won't alert me if the DHCP server stops working because the unit still responds to a ping.
Does anyone know of a fix?
The workaround is to power cycle the unit, but that needs me to be at the office and I'm not always here.It is the DHCP server within the Linksys BEFSR41 that intermittently stops working. I do not have another DHCP server on the network.
I'm curious why changing the MTU would help. If you could explain, I'd certainly give that a try.
At the moment, the BEFSR41 serves as the DHCP server and firewall for our guest network. I keep an eye on it by enabling external ping response. However, I have found that the firewall part of the BEFSR41 will work and it will respond to a ping. But newly connected computers won't get an IP address lease. I power cycle the unit and its DHCP server will work again. The trouble is, because the unit responds to a ping, I won't know if the DHCP server is not working until someone reports it. And I'd like to be proactive about things.
Message Edited by boomer on 04-06-2009 05:17 PM -
Safari - "web pages not responding" about once an hour. I'm about to switch to Chrome if I can't fix this. Help?
Regarding #1, your post says you have a beta version of Firefox 4. That may well be incorrect, but that is why the site says you do not have the latest version.
Losing graphics on the bookmarks toolbar and not having a working back button are not normal, but I'm not sure whether you want to troubleshoot Firefox 4, roll back to Firefox 3.6, or just move on.
How can we help? -
cffeed caching works locally but not on server
So I got my new Hostek account set up (woohoo!) and I've started uploading some basic files so I can do thinks like validate my code and make sure everything's working. One thing that does not work (but does locally) is my news feed caching.
Pulling in two RSS feeds was seriously slowing down my index page loading, so I stole a trick from Ray Camden on caching the feeds. It works perfectly on my dev machine at home, but doesn't work on my hosted account.
Here's the exact code being used:
<cfset feedurl = "http://velonews.competitor.com/feed">
<cfset cacheTime = #createtimespan(1,0,0,0)#>
<cfif not structKeyExists(application,"rsscache") or dateDiff("n", application.rsscache.created, now()) gt cacheTime>
<cffeed source="#feedurl#" query="entries">
<cfset application.rsscache = structNew()>
<cfset application.rsscache.data = entries>
<cfset application.rsscache.created = now()>
</cfif>
<ul>
<cfloop query="#application.rsscache.data#" startrow="1" endrow="6">
<cfoutput><li><a href="#rsslink#">#title#</a></li></cfoutput>
</cfloop>
</ul>
I tried wrapping a try/catch around the top section (above the <ul>) and still got nothing for an error message. The page just stops being rendered at that first <ul>.
I'm not sure why it works locally but not on the web server. Any ideas?Miraculously, I got it working.
I changed this:
<cfloop query="#application.rsscache.data#" startrow="1" endrow="6">
<cfoutput><li><a href="#rsslink#">#title#</a></li></cfoutput>
</cfloop>
To this:
<cfoutput maxrows="6" query="application.rsscache.data">
<li><a href="#rsslink#">#title#</a></li>
</cfoutput>
And bingo! It worked. Perhaps it's an idiosyncrasy between CF9 and CF10. -
The buttons to my old iPod nano 1st or 2nd gen (I don't remember) do not respond/work. Can this be fixed??
The Sad face icon is usually a very good indication of a hardware malfunction or failure usually with the iPod's Hard Drive, which would also explain the loud clicking noise you are hearing.
I assume you have seen this article yet?
iPod display's a sad iPod icon
If you are up for the challenge, you can also try all of the troubleshooting mentioned described by another forum member Mitch 751.
https://discussions.apple.com/thread/1193481?start=0&tstart=0
B-rock -
My iphone's screen goes black and it behaves like that it is switched off.No switches work and the power button also does not respond.The ringtone do not also respond.The only way to switch on the phone is to press home button and power button together.
Pressing the Home button and the sleep/wake or on/off button together until you see the Apple logo and then release is called a reset.
If no change after a reset, the next step is restoring your iPhone. -
My iPhone will not respond even once it is hooked to iTunes nor will it respond when I hit the power (reset) button. The screen mentions that the system is checking for "borrowed blocks" (small writing in the top right corner).
Are you using the charger and cable that came with the phone?
Are you using an unauthorized third party charger?
Maybe you are looking for
-
plz help, i need to update my iphone and it wont let me HELP!!!!! i also try to sync music to it and when i do it freezes the computer and the rainbow spiral thingy shows up
-
Adobe Edge Animate CC / 2014: Saving issue, program locks up when saving or Save-As
Edge Animate CC (and CC 2014) regularly freezes up when I hit save or save-as. When the programs does save without crashing/freezing it goes through a nail-biting screen flickering sequence, the mouse becomes inactive, the warning '( Not Responding)
-
I have users that want to access GW with different clients than the GW client (smart phone, Thunderbird etc). They can POP the email from the server to their client, but cannot send. In troubleshooting, I'm trying to telent to port 25 on the public I
-
500ml,300ml glasses. How will you dole out 100ml,200ml water? this is the problem.. I need to use this in a program...but unable to solve it. pls help! s it possible to solve??
-
Can't install TCS4 on two different XP SP3 systems
I can't install the TCS4 trial version on two different XP SP3 systems. Adobe has no solution to this problem. The Installer says "System Requirements" as error message after selection of the different applications. Then I get the link to the Adobe T