Sfari freezes when changing time

I had a series of freezes from safari recently, and I think I have found the cause:
Running bootcamp I sometimes boot under windows, and when I boot back to Mac the clock time has changed. So i reset it back to normal (using Date and Time ), but if I have safari running at the time it just freezes. The rest of the computer is fine, as the menu bars are, it's just the actual pages that freeze (can't scroll down, click on links ...). I can just restart safari but that some times means having to redo a lot of stuff which can be problematic.
Anyone else have that problem or know how to fix it ?

Hello Sura,
Should we presume you did the "Daylight Saving Time Update".
if you did not, this below is quoted from this article About Daylight Saving Time changes in 2007
February, 2007 "Daylight Saving Time Update
Apple is providing software updates for Mac OS X 10.3, 10.4 and later based on worldwide time zone information available as of January 8, 2007. To make sure that your clock maintains the proper time, simply install the updates that are shown for your computer in Software Update.You should install these updates even if your computer is used in a time zone that is not affected. For more details about the available updates, or if you have an earlier Mac OS version, see below."see the full article for more
You can download it here
Hope this helps. some.
Eme'~[)

Similar Messages

My MBP with RD's Facetime camera freezes when changing portrait to landscape during facetime calls on the display of the person who i'm calling to, but it shows alright on my side, what's going on?

My MBP with RD's Facetime camera freezes when changing portrait to landscape during facetime calls on the display of the person who i'm calling to, but it shows alright on my side, what's going on?
Another thing is that on Skype, whenever i clicked to sharescreen it only show a complete black out window. nothing else.
Tried restore OSX mountain lion, doesn't work. what should i do?

kaeandcolesmon,
If you open the recovery drive (partition) it should only have a single folder (Recovery).
To make sure that your not saving restore points to that drive.
See:
Start, Control Panel, System, System Protection tab. Make sure the D drive partition is set to OFF so that it does not save there.
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

Can I set calender invite to set at the same time, even when changing time zone. for example I am in the UK have set a meeting for 10am in NYC for weds, but when getting to NYC it is still set at 10am and doen't adjust to time zone?

Can I set my Calendar invites on a IOS 7 device to set at the same time, even when changing time zones. For example I am in the UK and need to set a meeting for 10am NYC time on Wednesday, but when I reach NYC I don't want the time zones to adjust which will then adjust my meeting I set in the UK to NYC time.

Here are the individual files for those that fear the my other file of virii.
Attachments:
HASP.vi ‏88 KB
File Setup.vi ‏11 KB
Gather and Output.vi ‏149 KB

IMac freezes when changing the screen saver

Hi all:
I originally posted this in the "Using Mac OS X" forum (iMac freezes when changing the screen saver, but thought I'd post here as well since the issue arises on a freshly installed OS.
We've got three 350MHz slot-loading G3 iMacs (with 512MB RAM) which we're planning to use for basic word processing. The install of Panther (10.3.5 from black retail cds with 10-seat volume license) went fine on the first two. Ran the updates to 10.3.9, installed MS Office 2004, everything working great (they're a little slow, but after all, they are only 350 MHz).
On the third, the first problem we noticed was the computer would lock up whenever we changed the screen saver from the default (Flurry; Computer Name also works). It continues to do so even after: repair permissions; repair disk; Disk Warrior; reset pram; reset nvram; reset pmu; change RAM; change hard drive; erase hard drive; write zeros to hard drive; reinstall with different set of retail CDs; trash preferences, and delete cache files. (If there's anything I've left out, it's in the other thread).
Now we've noticed that we can't create any new user accounts. We've thought about putting this one in production, just warning the user that they can't change the screen saver, but god only knows what will turn up next.
I'm starting to think it's a logic board issue, but could it be that selective? And would you see the same problem with another hard drive and different install discs? Am I missing something?
BTW, there's a crash log with the other thread.
Andrew
Dual 2.0 GHz G5 Mac OS X (10.3.9)

I'm going to mark this one as answered.
I removed the hard drive from the iMac, and put it into another 350 MHz iMac, and everything works great. I can select any screen saver without having it freeze, create new accounts, whatever my little heart desires.
In checking the history of the problem iMac, there was an assortment of problems with booting (both from the hard drive and from the CD-ROM drive) which were never satisfactorily resolved. The problems just seemed to go away after sitting unplugged for a few days, as much as for anything we actually did to it.
Now we just have to decide whether it's worth fixing, or using it somewhere in a non-critical role with OS 9 installed.
Cheers,
Andrew

Auto update of time when changing time zones - PLEASE help.

I travel for a living and I can't figure out how to get this 8310 to auto update the time when I fly from one time zone to another. Can anyone help me with this? Thank you so much in advance!

I'm sorry to inform you that the blackberry does not have a feature like this yet. You can read this FAQ and it will give you some tips though.
Why doesn't my time update correctly when I change Time Zones? - BlackBerryFAQ.com
You would need to set that manually and enter the meeting times in accordingly.
Sorry!

Problem when change time of Linux

Hi All,
we are developing an application using Adobe Air 1.5 and an issue is happenning when the time of Linux is delayed. For example, when the clock is delayed from 10 to 9 hours, the application freezes. Do you have any solution to this problem?
Regards
Vamberto.

That was my guess
Craig Wollman
Word of Mouth Productions
phone 212 928 9581
fax 212 928 9582
159-00 Riverside Drive West #5H-70
NY, NY 10032
www.wordofmouthpros.com
"openspark" <[email protected]> wrote in
message
news:e1e1pc$183$[email protected]..
> The original code does not work because the rect of the
sprite is not
> updated
> after each command. This will also work...
>
> sprite(1).left = sprite(1).left - 5
> updateStage
> sprite(1).right = sprite(1).right + 5
> updateStage
>
> ... but it uses many more CPU cycles
>

Entourage - Appointments change when changing time zone

Hello There,
When changing the time zone in Entourage all the appointments already entered do change as well.
E.g. the appointment is 8 am. After changing the time zone by 4 hours, the appointment changes to 4 am
I don't know why that is as it does not make any sense at all. Just because you change the time zone while travelling the time of your appointments don't change.
What can I do to avoid he undesired change of appointments.
Thanks

Hi Tom!
Don't change the timezone in Entourage once you have it set. Instead, change your Mac's timezone using the Date & Time System Preferences pane.
The default timezone in Entourage is your reference point for new appointments only. For example, if you create an appointment at 9 a.m. CST, it's still going to occur at 9 a.m. CST even though you're really at 7 a.m. PST by your clock. If you intend to schedule an appointment that will occur while you're traveling schedule it for the time in your Entourage default timezone.
Hope this helps! bill
1 GHz Powerbook G4 Mac OS X (10.4.7)

Apple TV freezes when changing TV Resolution to 1080p HD

We just got a new Samsung 1080p HD TV. When I tried to change the Apple TV's TV Resolution in Settings > Audio Video > TV Resolution, I can scroll down to highlight 1080p HD, but as soon as I press Select on the remote, the Apple TV freezes. The only way I can get out of that screen is by holding Menu and - on the remote for six seconds and rebooting the TV.
Any suggestions for how I can fix this problem?
Thanks!

iPhotoStuff 2 wrote:
okay, so can you still have Front Row 2.3 and launcher 2.2 at the same time after the factory restore? Or if you ever have 2.2 up it will cause this "crash" issue? Cheers mate.
you might want to be carefull about what you are discussing here, as it is clearly an unauthorised hack you are running, and as such would not be allowed to be discussed on here.
i know what you mean when you say "launcher 2.2" but others might not and assume it is some sort of official apple setting.

Game freezes when changing displays

Hi all
i am using Nokia 3510i.
i have a wired problem,sometimes when i change then display object in my game(2 Canvases) and in the same time i press on some keys(i am using a key listener for my game) everything freezes and i have to close my MIDlet .
now,i solved this by using a boolean flag in the :
keyPressed(int parm1) {
if(bRejectKeys) return;
and i set it before replacing the displays and then nothing freezes.
but i want to know why everything was freezing before,if this is a known issue and if my solution is not covering a bigger bug that might happen.
thanks

It's tough to tell by your description what exactly is going on.
Are you starting any threads in keyPressed()? Maybe one of those threads needs to be stopped by the canvas that turned inactive. Are there any live references to the old canvas after the switch?
Maybe with some more code (the rest of the offending keyPressed(), and the code that switches the displays) we can shed some more light on the subject.
shmoove

Os x 10.8.3 freezes when changing screen saver

I recently installed 10.8.3. One of the glitches is that when I attempt to change the screen saver, my computer freezes. Is there a fix for this?

try this - not sure if it will work for you but it's worth a try.
open disk utility - verify your disk permissions - repair if errors are found then restart your macbook once the repairs are done.
see if that changes the way your macbook responds to changing your screen saver.

Strange network freezes when wrong time is set (with transmission-gtk)

Hi!
After transmission-gtk running for a while, the network doesn't work any more, not even the connection to the router. Even after closing transmission-gtk, the problem persists until I disconnect from the network (using wicd / wpa atm) - or wicd freezes and refuses to start again. Trying to use ifconfig / iwconfig makes the terminal freeze (not recovering with ctrl+c), other tty/vty's still work. System won't shutdown / reboot after this happens, the tty that gave the command just freezes.
Not sure where to start here... can't use iwconfig/ifconfig... can't look up stuff online while I'm on the machine trying to work this out... any hints?
Thanks!
edit: some random information that I don't think contains anything useful:
wlan0 IEEE 802.11bgn ESSID:"wlanx"
Mode:Managed Frequency:2.412 GHz Access Point: 48:5B:39:E8:54:98
Bit Rate=54 Mb/s Tx-Power=20 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Power Management:off
Link Quality=47/70 Signal level=-63 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:67 Missed beacon:0
wlan0 Link encap:Ethernet HWaddr 54:E6:FC:88:C9:72
inet addr:192.168.144.56 Bcast:192.168.255.255 Mask:255.255.0.0
inet6 addr: fe80::56e6:fcff:fe88:c972/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:16365 errors:0 dropped:0 overruns:0 frame:0
TX packets:12310 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:8815506 (8.4 Mb) TX bytes:2072550 (1.9 Mb)
(thats when everything works fine of course...tools don't work when this error occurs )
edit:
After looking for the fifth time, found a semi-interesting part in messages.log (thats a few minutes around the problem occuring, with failed reboot etc...):
Dec 9 16:52:22 localhost kernel: [ 1501.828150] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Dec 9 16:52:23 localhost kernel: [ 1502.096812] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Dec 9 16:52:23 localhost kernel: [ 1502.350614] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Dec 9 16:52:26 localhost kernel: [ 1504.914410] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Dec 9 16:52:26 localhost dhcpcd[4723]: version 5.2.12 starting
Dec 9 16:52:26 localhost dhcpcd[4723]: wlan0: broadcasting for a lease
Dec 9 16:52:29 localhost dhcpcd[4723]: wlan0: offered 192.168.144.56 from 192.168.11.11
Dec 9 16:52:29 localhost dhcpcd[4723]: wlan0: acknowledged 192.168.144.56 from 192.168.11.11
Dec 9 16:52:29 localhost dhcpcd[4723]: wlan0: checking for 192.168.144.56
Dec 9 16:52:34 localhost dhcpcd[4723]: wlan0: leased 192.168.144.56 for 600000 seconds
Dec 9 16:52:34 localhost dhcpcd[4723]: forked to background, child pid 4746
Dec 9 16:54:45 localhost kernel: [ 1644.059228] transmission-gt[4941]: segfault at fffffffffffffff7 ip 000000000044d347 sp 00007f79b69feac0 error 4 in transmission-gtk[400000+b7000]
Dec 9 17:03:20 localhost dhcpcd[6704]: sending signal 1 to pid 4746
Dec 9 17:03:20 localhost dhcpcd[6704]: waiting for pid 4746 to exit
Dec 9 17:03:20 localhost dhcpcd[4746]: received SIGHUP, releasing
Dec 9 17:03:20 localhost dhcpcd[4746]: wlan0: releasing lease of 192.168.144.56
Dec 9 17:03:20 localhost dhcpcd[4746]: wlan0: removing interface
Dec 9 17:03:21 localhost kernel: [ 2160.076551] cfg80211: Calling CRDA to update world regulatory domain
Dec 9 17:03:21 localhost kernel: [ 2160.423451] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Dec 9 17:03:24 localhost kernel: [ 2163.236352] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Dec 9 17:03:26 localhost kernel: [ 2165.659989] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Dec 9 17:03:27 localhost kernel: [ 2165.947971] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Dec 9 17:03:29 localhost kernel: [ 2168.505313] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Dec 9 17:03:30 localhost dhcpcd[6860]: version 5.2.12 starting
Dec 9 17:03:30 localhost dhcpcd[6860]: wlan0: broadcasting for a lease
Dec 9 17:03:32 localhost dhcpcd[6860]: wlan0: offered 192.168.144.56 from 192.168.11.11
Dec 9 17:03:32 localhost dhcpcd[6860]: wlan0: acknowledged 192.168.144.56 from 192.168.11.11
Dec 9 17:03:32 localhost dhcpcd[6860]: wlan0: checking for 192.168.144.56
Dec 9 17:03:38 localhost dhcpcd[6860]: wlan0: leased 192.168.144.56 for 600000 seconds
Dec 9 17:03:38 localhost dhcpcd[6860]: forked to background, child pid 6883
Dec 9 17:07:35 localhost -- MARK --
Dec 9 17:21:01 localhost dhcpcd[8752]: sending signal 1 to pid 6883
Dec 9 17:21:01 localhost dhcpcd[8752]: waiting for pid 6883 to exit
Dec 9 17:21:01 localhost dhcpcd[6883]: received SIGHUP, releasing
Dec 9 17:21:01 localhost dhcpcd[6883]: wlan0: releasing lease of 192.168.144.56
Dec 9 17:22:22 localhost shutdown[8824]: shutting down for system reboot
Dec 9 17:22:22 localhost init: Switching to runlevel: 6
Dec 9 17:22:23 localhost acpid: exiting
Dec 9 17:23:54 localhost kernel: [ 0.000000] Initializing cgroup subsys cpuset
Dec 9 17:23:54 localhost kernel: [ 0.000000] Initializing cgroup subsys cpu
Last edited by whoops (2011-08-14 07:51:53)

I have had problems where my connection would drop "coincidently" while downloading torrents. I use ipblock to block unwanted ip addresses, force encryption both ways, and use tcpkill (pretty sure it is in the "dsniff" package) to block foreign ports that seem suspicious to me. Also, I have noticed that if there is a lot of connections my network will almost halt and if I limit the connected number of connections per torrent after the swarm gets going then it will first drop peers instead of seeds so it does not really seem to effect speed either. I do not use transmission so I do not know all the particulars there ( using deluge) but there should be similar settings for encryption as well. If doing a lot of downloads I also reset my router (unplug it) for about 5 minutes when I am done and reboot just to be sure. If you think that your troubles may be caused by your isp or an anti-p2p group I would definitely give the above a shot.
Last edited by dodo3773 (2011-08-14 04:00:49)

Problems with auto-scale vertical charts when change time zones

I have built an application that utalizes Vertical Strip Charts. Basiclly, XY Charts that are filled with 100 points of data each loop cycle. To get the Time portion of it I use the Get Dat/Time in Seconds Function and then typecast it to a double. I have built the application and installed in on several PC in my same time zone no problem, but when I send it to someone in the UK on GMT time the strip chart does not update correctly. The scaling is off. The interesting thing is the most recent time on the chart is correct and is updating correctly, but the time at the top of the graph is not correct. Any suggestions or thoughts would be appreaciated.

Can you post a copy of this application, or an example that would demonstrate this? If you change your timezone on your computer to UK's timezone and restart LabVIEW (which is necessary for the change to take affect in LV), do you see this behavior?
Jarrod S.
National Instruments

IPhoto freezes when changing editor in Pref.

It never happened before. Maybe it has to do with installing the new PSE 11 today.
My external editor was PSE 8.
In Pref. Advanced tab, under "use editor" was iPhoto.
So today after installing the new PSE11, I wanted to change the external editor to the new one.
As soon as I clicked "Photoshop Elements", to replace iPhoto under "use editor", iPhoto became non-responsive, froze.
Before that I unchecked MobileMe Sync from showing in the top menu bar. thought maybe it the reason...
iPhoto has already prompted me to repair the library after few forced quits.

I deleted everything associated with MobileMe. Probably too much, and now I got a new problem.
Now I can't even open iPhoto.
I used EasyFind applic. to search for anything with MobileMe in it. Found quite a lot, deleted, and some of the files were needed for iPhoto, but I didn't realize.
I decided to install Mountain Lion, hoping it will fix everything. It didn't.
Command+Option keys to rebuild the library, don't work now either.
I had iPhoto'11, but for some reason the report mentions an earlier version 9.4.2
Wanted to re-install iPhoto'11 from Appstore, but in the purchases it's not listed.
Re-install would probably fix the problem.
Here is what I get when trying to open iPhoto:
iPhoto can not be opened because of the problem. Check with the developer to make sure iPhoto works with this version of OSX. You may need to reinstall the applic. Be sure to install any available updates for the applic. and OSX.
Here is part from it, and that I remember deleting something like that and also some images of MobileMe, then used Onyx to cleanup:
Library not loaded: @executable_path/../Frameworks/MobileMe.framework/Versions/A/MobileMe
Referenced from: /Applications/iPhoto.app/Contents/MacOS/iPhoto
Reason: image not found
Problems details and system configuration:
================================
Process:         iPhoto [210]
Path:            /Applications/iPhoto.app/Contents/MacOS/iPhoto
Identifier:      com.apple.iPhoto
Version:         9.4.2 (9.4.2)
Build Info:      iPhotoProject-710042000000000~2
App Item ID:     408981381
App External ID: 11723545
Code Type:       X86 (Native)
Parent Process: launchd [117]
Date/Time:       2012-11-23 09:17:46.875 +0200
OS Version:      Mac OS X 10.7.5 (11G63)
Report Version: 9
Interval Since Last Report:          394253 sec
Crashes Since Last Report:           -2
Per-App Interval Since Last Report: 10585 sec
Per-App Crashes Since Last Report:   3
Anonymous UUID:                      51B57919-DCC3-45B7-ACDF-B82302713A2C
Crashed Thread: 0
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Application Specific Information:
dyld: launch, loading dependent libraries
Dyld Error Message:
Library not loaded: @executable_path/../Frameworks/MobileMe.framework/Versions/A/MobileMe
Referenced from: /Applications/iPhoto.app/Contents/MacOS/iPhoto
Reason: image not found
Binary Images:
   0x80000 -   0xd6cfeb com.apple.iPhoto (9.4.2 - 9.4.2) <3AC6405B-33E2-3184-9F20-4C9CC5256A3A> /Applications/iPhoto.app/Contents/MacOS/iPhoto
0xf00000 -   0xfe0fe7 org.python.python (2.6.7 - 2.6.7) <61DBA92A-C39A-3A52-86F2-59CF9D310CB4> /System/Library/Frameworks/Python.framework/Versions/2.6/Python
0x102b000 - 0x1033fff com.apple.PhotoFoundation (1.0 - 10.17) <D48FDC95-21FC-328C-9F4F-89C28A260C2D> /Applications/iPhoto.app/Contents/Frameworks/PhotoFoundation.framework/Versions /A/PhotoFoundation
0x10a1000 - 0x127dffb com.apple.geode (1.5.3 - 270.7) <DFD97416-FD86-3AF1-BFF0-79A47DADE257> /Applications/iPhoto.app/Contents/Frameworks/Geode.framework/Versions/A/Geode
0x130c000 - 0x1311ff7 com.apple.iLifePhotoStreamConfiguration (3.4 - 2.5) <65A74F18-5020-31EC-B7E9-EBC14E2D9CA1> /Applications/iPhoto.app/Contents/Frameworks/iLifePhotoStreamConfiguration.fram ework/Versions/A/iLifePhotoStreamConfiguration
0x1319000 - 0x1348ff7 com.apple.iLifeAssetManagement (2.7 - 40.34) <2B65BA8A-2C25-360D-B50E-0A9EECA1CE57> /Applications/iPhoto.app/Contents/Frameworks/iLifeAssetManagement.framework/Ver sions/A/iLifeAssetManagement
0x136c000 - 0x1393ff3 com.apple.iPhoto.Tessera (1.1 - 70.18) <F190FD9B-9CC9-3D4D-9744-113F7CA36097> /Applications/iPhoto.app/Contents/Frameworks/Tessera.framework/Versions/A/Tesse ra
0x13a6000 - 0x13caffb com.apple.iPhoto.Tellus (1.3 - 70.18) <768463A7-60B4-3D50-B36B-D6E5AFA43DC9> /Applications/iPhoto.app/Contents/Frameworks/Tellus.framework/Versions/A/Tellus
0x13e0000 - 0x13ebfff com.apple.iphoto.AccountConfigurationPlugin (1.2 - 1.2) <86E53BF3-BCAD-36F9-999B-013E359EF079> /Applications/iPhoto.app/Contents/Frameworks/AccountConfigurationPlugin.framewo rk/Versions/A/AccountConfigurationPlugin
0x13f9000 - 0x140effb com.apple.iLifeFaceRecognition (1.0 - 30.11) <4A781CBF-9764-3531-91E0-94C5B4DFCFDF> /Applications/iPhoto.app/Contents/Frameworks/iLifeFaceRecognition.framework/Ver sions/A/iLifeFaceRecognition
0x141d000 - 0x1449ffb com.apple.DiscRecordingUI (6.0.4 - 6040.4.1) <F3EDDD79-611F-3ECC-9B78-0AB8BAC0D446> /System/Library/Frameworks/DiscRecordingUI.framework/Versions/A/DiscRecordingUI
0x1463000 - 0x1465fff com.apple.ExceptionHandling (1.5 - 10) <7C514CC4-7951-31CA-AEB3-D4AF49F44AE7> /System/Library/Frameworks/ExceptionHandling.framework/Versions/A/ExceptionHand ling
0x146c000 - 0x1477ff7 com.apple.UpgradeChecker (9.2 - 9.2) <D34CC218-8200-34D7-816C-B747EE4BF5F7> /Applications/iPhoto.app/Contents/Frameworks/UpgradeChecker.framework/Versions/ A/UpgradeChecker
0x1481000 - 0x181aff3 com.apple.iLifeSlideshow (3.1 - 1151.4) <B03978EF-A395-30D4-833B-7C474E1F5F12> /Applications/iPhoto.app/Contents/Frameworks/iLifeSlideshow.framework/Versions/ A/iLifeSlideshow
0x1917000 - 0x1ba8ff3 com.apple.iLifePageLayout (1.3 - 200.9) <067ACE80-5B73-39EE-850B-E392F6573AAC> /Applications/iPhoto.app/Contents/Frameworks/iLifePageLayout.framework/Versions /A/iLifePageLayout
0x8fe7f000 - 0x8feb1aa7 dyld (195.6 - ???) <3A866A34-4CDD-35A4-B26E-F145B05F3644> /usr/lib/dyld
0x90015000 - 0x90015fff com.apple.Carbon (153 - 153) <F996332A-390E-3337-A09E-A1E54004B567> /System/Library/Frameworks/Carbon.framework/Versions/A/Carbon
0x91cb9000 - 0x91cc1fff com.apple.DiskArbitration (2.4.1 - 2.4.1) <28D5D8B5-14E8-3DA1-9085-B9BC96835ACF> /System/Library/Frameworks/DiskArbitration.framework/Versions/A/DiskArbitration
0x921ba000 - 0x922cafe7 libsqlite3.dylib (9.6.0 - compatibility 9.0.0) <34E1E3CC-7B6A-3B37-8D07-1258D11E16CB> /usr/lib/libsqlite3.dylib
0x92cbf000 - 0x92ccdfff com.apple.opengl (1.8.1 - 1.8.1) <766AFB12-A2CB-3A55-B662-FC9FFCAE0008> /System/Library/Frameworks/OpenGL.framework/Versions/A/OpenGL
0x92f13000 - 0x93076fff com.apple.QTKit (7.7.1 - 2339) <163FBDDD-0458-378F-84DD-CB0F603A259E> /System/Library/Frameworks/QTKit.framework/Versions/A/QTKit
0x942bd000 - 0x94471ff3 libicucore.A.dylib (46.1.0 - compatibility 1.0.0) <4AFF6FC3-6283-3934-8EFC-CA227CA11164> /usr/lib/libicucore.A.dylib
0x947a0000 - 0x947b5fff com.apple.iChat.InstantMessage (6.0.2 - 837) <CACCC8C0-F50D-340A-9107-E0A0784889DE> /System/Library/Frameworks/InstantMessage.framework/Versions/A/InstantMessage
0x94967000 - 0x949a4ff7 libcups.2.dylib (2.9.0 - compatibility 2.0.0) <007A1877-E981-3007-A8FA-9B179F4ED6D1> /usr/lib/libcups.2.dylib
0x94dd6000 - 0x94e3afff com.apple.framework.IOKit (2.0 - ???) <94827954-5906-36C4-819B-24CDAFD85C72> /System/Library/Frameworks/IOKit.framework/Versions/A/IOKit
0x95116000 - 0x95124fff libz.1.dylib (1.2.5 - compatibility 1.0.0) <E73A4025-835C-3F73-9853-B08606E892DB> /usr/lib/libz.1.dylib
0x95929000 - 0x95971ff7 com.apple.SystemConfiguration (1.11.3 - 1.11) <68B92FEA-F754-3E7E-B5E6-D512E26144E7> /System/Library/Frameworks/SystemConfiguration.framework/Versions/A/SystemConfi guration
0x9669e000 - 0x9669efff com.apple.Cocoa (6.6 - ???) <5FAFE73E-6AF5-3D09-9191-0BDC8C6875CB> /System/Library/Frameworks/Cocoa.framework/Versions/A/Cocoa
0x96e24000 - 0x96ea3ff7 com.apple.iLifeMediaBrowser (2.6.4 - 502.4.5) <5C10CC72-586E-3497-9873-A0ACFB6156C3> /System/Library/PrivateFrameworks/iLifeMediaBrowser.framework/Versions/A/iLifeM ediaBrowser
0x9789b000 - 0x9789bfff com.apple.Accelerate (1.7 - Accelerate 1.7) <4192CE7A-BCE0-3D3C-AAF7-6F1B3C607386> /System/Library/Frameworks/Accelerate.framework/Versions/A/Accelerate
0x992ac000 - 0x99531fe3 com.apple.QuickTime (7.7.1 - 2339) <FC82F13B-1788-3766-8681-7A3B1EFAE02D> /System/Library/Frameworks/QuickTime.framework/Versions/A/QuickTime
0x9957f000 - 0x996e1ffb com.apple.QuartzCore (1.7 - 270.5) <6D0EC7FC-11E5-35FB-A08A-3B438E89FBDB> /System/Library/Frameworks/QuartzCore.framework/Versions/A/QuartzCore
0x996e2000 - 0x999b1ffb com.apple.security (7.0 - 55148.6) <8DF67BDD-C98F-3B7E-AC63-D468407FA82D> /System/Library/Frameworks/Security.framework/Versions/A/Security
0x99d55000 - 0x99d55ff0 com.apple.ApplicationServices (41 - 41) <C48EF6B2-ABF9-35BD-A07A-A38EC0008294> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Application Services
0x9a570000 - 0x9a687fe9 com.apple.WebKit (7534.57 - 7534.57.7) <85DAC34E-86A1-380F-B166-56630C9B0BD5> /System/Library/Frameworks/WebKit.framework/Versions/A/WebKit
0x9a688000 - 0x9a93aff7 com.apple.AddressBook.framework (6.1.3 - 1091) <B8CC707C-6368-3CDD-BE38-D2335B7CC2DE> /System/Library/Frameworks/AddressBook.framework/Versions/A/AddressBook
0x9b3d3000 - 0x9b4b4ff7 com.apple.DiscRecording (6.0.4 - 6040.4.1) <08BADDAD-FA79-3872-9387-EEE2A9FAA2F0> /System/Library/Frameworks/DiscRecording.framework/Versions/A/DiscRecording
0x9c45e000 - 0x9c635fe7 com.apple.CoreFoundation (6.7.2 - 635.21) <4D1D2BAF-1332-32DF-A81B-7E79D4F0A6CB> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
0x9ce35000 - 0x9ce35ff2 com.apple.CoreServices (53 - 53) <7CB7AA95-D5A7-366A-BB8A-035AA9E582F8> /System/Library/Frameworks/CoreServices.framework/Versions/A/CoreServices
Model: iMac7,1, BootROM IM71.007A.B03, 2 processors, Intel Core 2 Duo, 2 GHz, 4 GB, SMC 1.20f4
Graphics: ATI Radeon HD 2400 XT, ATI,RadeonHD2400, PCIe, 128 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR2 SDRAM, 667 MHz, 0x7F7F7F7F7FF70000, 0x00004B363435365536314535363637460000
Memory Module: BANK 1/DIMM1, 2 GB, DDR2 SDRAM, 667 MHz, 0x7F7F7F7F7FF70000, 0x00004B363435365536314535363637460000
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x88), Broadcom BCM43xx 1.0 (5.10.131.36.15)
Bluetooth: Version 4.0.8f17, 2 service, 11 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: Hitachi HDT725025VLA380, 250.06 GB
Parallel ATA Device: PIONEER DVD-RW DVR-K06A
USB Device: Keyboard Hub, apple_vendor_id, 0x1006, 0xfa400000 / 2
USB Device: Apple Optical USB Mouse, apple_vendor_id, 0x0304, 0xfa430000 / 5
USB Device: MobileMate Reader, 0x0781 (SanDisk Corporation), 0xb2b5, 0xfa410000 / 4
USB Device: Apple Keyboard, apple_vendor_id, 0x0220, 0xfa420000 / 3
USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0xfd400000 / 2
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8206, 0x1a100000 / 2
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x5d100000 / 2

ITunes 10.6 freezes when changing sync settings

Update to iTunes 10.6 on Windows 7 computer today. Now when I try to change my sync settings, and hit "apply" - iTunes freezes and the sync does not complete. I have already tried to factory reset the iPod Nano, and tried to totally uninstall and reinstall iTunes. Any other suggestions?

Uninstall/Reinstall did not work. Same issue with freezing as soon as it's launched.
Just to confirm, this is 10.6.3 64-bit Windows build.

Macbook Air freezes when changing screensaver

I am having issues when I try to change my screensaver. Whenever I click on a different screensaver option, my Macbook Air freezes, and I have to force close System Preferences. I have no problems with changing my desktop wallpaper. I have restarted my laptop but it still freezes.
I saw another board with a similiar problem except instead of the screensaver window freezing, their desktop window would freeze.
Any ideas? Thanks in advance for any suggestions!

Back up all data. Quit System Preferences if it's running.
Triple-click anywhere in the line below on this page to select it, then copy the text to the Clipboard by pressing the key combination command-C:
~/Library/Preferences/ByHost
In the Finder, select
Go ▹ Go to Folder...
from the menu bar. Paste into the box that opens (command-V), then press return. A folder should open. If it does, look for a file with a long name that begins "com.apple.screensaver". There may be several such files. Move them to the Trash.
Test. If the problem is resolved. recreate your settings in the Screen Saver tab.

Sfari freezes when changing time

Similar Messages

Maybe you are looking for