SFC /scannow Hash mismatch

I see a couple of these after a sfc /scannow
2014-05-18 12:18:29, Info CSI 00000ad8 Hashes for file member \SystemRoot\WinSxS\amd64_microsoft-windows-c..s-admin-compsvclink_31bf3856ad364e35_6.3.9600.16384_none_c350b1d4ae70223b\Component
Services.lnk do not match actual file [l:44{22}]"Component Services.lnk" :
Found: {l:32 b:vCksGAZRTYKexOqIFZjdsk1hI11G0sZAokEglG6sW2I=} Expected: {l:32 b:eFB1ESc4ppQ1buJTGBqrYjqeSo6zPHzYo+ndxdLoWlQ=}
2014-05-18 12:18:29, Info CSI 00000ad9 [SR] Cannot repair member file [l:44{22}]"Component Services.lnk" of Microsoft-Windows-COM-ComPlus-Admin-CompSvcLink,
Version = 6.3.9600.16384, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
Should I be worried?

Hi theking2,
Before going further, would you please let me confirm whether this issue occurred on Windows Server 2012 Essentials?
Or any other OS?
Based on your description, I guess that there should be some corrupted files on this OS. So, you ran
sfc /scannow command, then encounter this issue. If anything I misunderstand, please don’t hesitate to let me know.
Please use DISM (Deployment Image Servicing
and Management) tool, then please use following DISM command to check.
DISM /Online /Cleanup-Image /RestoreHealth
When above command ran complete. Please run
sfc /scannow command again. Then please monitor the result.
Hope this helps.
Best regards,
Justin Gu

Similar Messages

SFC /scannow gives error that certain files cannot be repaired - utilman.exe hash does not match amoung others

https://drive.google.com/file/d/0B6E6-0H82S_-YjlkVlk1SkQ5Qk0/edit?usp=sharing
The CBS log is here

There's only the one error in the report... which is in the wrong forum, but I'll address it before moving the thread to a more appropriate forum.
Here's Your error message...
Line 12285: 2014-04-11 17:46:51, Info CSI 0000031d [SR] Repairing 1 components
Line 12286: 2014-04-11 17:46:51, Info CSI 0000031e [SR] Beginning Verify and Repair transaction
Line 12289: 2014-04-11 17:46:51, Info CSI 00000320 [SR] Cannot repair member file [l:22{11}]"Utilman.exe" of Microsoft-Windows-UtilMan, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
I've uploaded a file -
wtraa.zip - to my OneDrive at
Noel's OneDrive
Please download and save it.
Right-click on the saved file and select
Extract all...
Change the target to C:\ and click on Extract
Close all windows (it would be a good idea to print these instructions!)
Now reboot to the Repair Environment - as soon as the machine restarts, start tapping
F8 - this should bring up the Advanced Boot Menu, at the top of which should be the option 'Repair my Computer'
Pick that
You'll have to log in with your username and password.
Pick the option to use a Command Prompt
At the prompt type
DIR C:\wtraa
hit the enter key - if you get a 'Not Found' error try
DIR D:\wtraa
or
DIR E:\wtraa
The drive letter in use when you find the folder will need to be substituted (for<drive>) into the following command...
XCOPY <drive>:\wtraa <drive>:\windows\winsxs /y /i /s /v /h
(e.g. XCOPY P:\wfire P:\windows\winsxs /y /i /s /v /h )
run the command (it should take almost no time) and when the prompt returns, type
EXIT
and hit the Enter key to exit Command Prompt - reboot to Normal Mode Windows.
Now run
SFC /SCANNOW in an Elevated Command Prompt
then reboot and upload the new CBS.log file to your reply
Noel Paton | Nil Carborundum Illegitemi
CrashFixPC |
The Three-toed Sloth
No - I do not work for Microsoft, or any of its contractors.

My apps are suddenly stop working periovously it was working very well but one day it stop i have run sfc/scannow to even try to to systen restore but there is no restore point & even i try to restore to factory setting but it showing some file are miss

my apps are suddenly stop working periovously it was working very well but one day it stop i have run sfc/scannow to even try to to systen restore but there is no restore point & even i try to restore to factory setting but it showing some file are
missing even I update it to windows 8.1 update 1 but still same thing not even single app is working
in sfc/s014-04-13 13:14:03, Info                  CSI    000004cf [SR] Beginning Verify and Repair transaction
2014-04-13 13:14:12, Info                  CSI    000004d1 [SR] Cannot repair member file [l:36{18}]"Amd64\CNBJ2530.DPB" of prncacla.inf, Version =
6.3.9600.16384, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type = [l:24{12}]"driverUpdate", TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-04-13 13:14:19, Info                  CSI    000004d3 [SR] Cannot repair member file [l:36{18}]"Amd64\CNBJ2530.DPB" of prncacla.inf, Version =
6.3.9600.16384, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type = [l:24{12}]"driverUpdate", TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-04-13 13:14:19, Info                  CSI    000004d4 [SR] This component was referenced by [l:186{93}]"Microsoft-Windows-Printer-Drivers-Package~31bf3856ad364e35~amd64~~6.3.9600.16384.INF_prncacla"
2014-04-13 13:14:27, Info                  CSI    000004d5 [SR] Verify completcannow detail I get this result

and this the dism report
DISM report and It is showing that cammand cannot perform because of i/o devices error
2014-04-14 00:54:14, Info DISM PID=1208 TID=2820 Temporarily setting the scratch directory. This may be overridden by user later. - CDISMManager::FinalConstruct
2014-04-14 00:54:14, Info DISM PID=1208 TID=2820 Scratch directory set to 'C:\Users\R0027~1.JSA\AppData\Local\Temp\'. - CDISMManager::put_ScratchDir
2014-04-14 00:54:14, Info DISM PID=1208 TID=2820 DismCore.dll version: 6.3.9600.16384 - CDISMManager::FinalConstruct
2014-04-14 00:54:14, Info DISM PID=1208 TID=2820 Scratch directory set to 'C:\$SysReset\Temp'. - CDISMManager::put_ScratchDir
2014-04-14 00:56:26, Info DISM PID=6888 TID=6828 Temporarily setting the scratch directory. This may be overridden by user later. - CDISMManager::FinalConstruct
2014-04-14 00:56:26, Info DISM PID=6888 TID=6828 Scratch directory set to 'C:\Users\R0027~1.JSA\AppData\Local\Temp\'. - CDISMManager::put_ScratchDir
2014-04-14 00:56:26, Info DISM PID=6888 TID=6828 DismCore.dll version: 6.3.9600.16384 - CDISMManager::FinalConstruct
2014-04-14 00:56:26, Info DISM PID=6888 TID=6828 Scratch directory set to 'C:\$SysReset\Temp'. - CDISMManager::put_ScratchDir
2014-04-14 02:41:53, Info DISM PID=1068 TID=4108 Temporarily setting the scratch directory. This may be overridden by user later. - CDISMManager::FinalConstruct
2014-04-14 02:41:53, Info DISM PID=1068 TID=4108 Scratch directory set to 'C:\Users\R0027~1.JSA\AppData\Local\Temp\'. - CDISMManager::put_ScratchDir
2014-04-14 02:41:53, Info DISM PID=1068 TID=4108 DismCore.dll version: 6.3.9600.17031 - CDISMManager::FinalConstruct
2014-04-14 02:41:53, Info DISM PID=1068 TID=4108 Scratch directory set to 'C:\$SysReset\Temp'. - CDISMManager::put_ScratchDir

Sfc /scannow says: Protection found corrupt files but was unable to fix some of them

I have a problem on windows 8.1. When i right-click on folders windows explorer process freezes and does not respond. I've searched the internet and tried to execute the /sfc scannow command through the command promt (as admin). But when i do that an error
occures.
Here is the cbs log: https://www.dropbox.com/s/6457btvr8bsrnq0/CBS.log

Hi,
I found following 2 files were corrupted, please follow these steps to replace them:
2014-03-07 16:24:18, Info CSI 000004fe [SR] Cannot repair member file [l:36{18}]"Amd64\CNBJ2530.DPB" of prncacla.inf, Version = 6.3.9600.16384, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type = [l:24{12}]"driverUpdate", TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-03-07 16:24:28, Info CSI 00000500 [SR] Cannot repair member file [l:36{18}]"Amd64\CNBJ2530.DPB" of prncacla.inf, Version = 6.3.9600.16384, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type = [l:24{12}]"driverUpdate", TypeName neutral, PublicKey neutral in the store, hash mismatch
How to manually replace a corrupted system file with a known good copy of the file
http://support.microsoft.com/kb/929833/en-us#manually repair
Kate Li
TechNet Community Support

Runing SFC /Scannow

Hi,
Running SFC / Scannow on Windows 7 Ultimate Every Time come back with below:
Windows Resource Protection found corrupt files and successfully repaired.
Had try OneCare Safety Scanner. BTW. the computer work OK.
What should I do to fix it ?
Thank.

Hi, try replaced the files but come out below:
2010-03-12 05:02:10, Info                  CSI    000001bc [SR] Beginning Verify and Repair transaction
2010-03-12 05:02:10, Info                  CSI    000001be [SR] Cannot repair member file [l:22{11}]"diskmgt.CHM" of Server-Help-CHM.diskmgt.Resources, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture = [l:10{5}]"en-US", VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2010-03-12 05:02:10, Info                  CSI    000001c0 [SR] Cannot repair member file [l:22{11}]"diskmgt.CHM" of Server-Help-CHM.diskmgt.Resources, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture = [l:10{5}]"en-US", VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2010-03-12 05:02:10, Info                  CSI    000001c1 [SR] This component was referenced by [l:278{139}]"Microsoft-Windows-RemoteServerAdministrationTools-Package~31bf3856ad364e35~x86~en-US~6.1.7600.16385.RemoteServerAdministrationTools-Default"
2010-03-12 05:02:10, Info                  CSI    000001c4 [SR] Could not reproject corrupted file [ml:520{260},l:56{28}]"\??\C:\Windows\Help\mui\0409"\[l:22{11}]"diskmgt.CHM"; source file in store is also corrupted
2010-03-12 05:02:10, Info                  CSI    000001c6 [SR] Repair complete
2010-03-12 05:02:10, Info                  CSI    000001c7 [SR] Committing transaction
2010-03-12 05:02:10, Info                  CSI    000001cb [SR] Verify and Repair Transaction completed. All files and registry keys listed in this transaction have been successfully repaired
Anyway above is only help file form RemoteServerAdministration.
I think the RemoteServerAdministrationTools installation cause this.
Thank for your help
I will try to replaced the files again later.

Sfc /scannow - Cannot repair member file

I ran sfc /scannow What can I do to 2013-01-14 15:42:22, Info 2013-01-14 15:42:22, Info 2013-01-14 15:42:27, Info Found: {l:32 b:4uk9tm5o 2013-01-14 15:42:27, Info 2013-01-14 15:42:46, Info Found: {l:32 b:4uk9tm5o 2013-01-14 15:42:46, Info 2013-01-14 15:42:46, Info 2013-01-14 15:42:48, Info 2013-01-14 15:42:48, Info 2013-01-14 15:42:48, Info 2013-01-14 15:42:52, Info 2013-01-14 15:42:52, Info 2013-01-14 15:42:52, Info 2013-01-14 15:42:57, Info 2013-01-14 15:42:57, Info 2013-01-14 15:42:57, Info 2013-01-14 15:43:03, Info 2013-01-14 15:43:03, Info 2013-01-14 15:43:03, Info 2013-01-14 15:43:17, Info 2013-01-14 15:43:17, Info 2013-01-14 15:43:17, Info 2013-01-14 15:43:21, Info 2013-01-14 15:43:21, Info 2013-01-14 15:43:21, Info 2013-01-14 15:43:22, Info Found: {l:32 b:4uk9tm5o 2013-01-14 15:43:22, Info 2013-01-14 15:43:22, Info Found: {l:32 b:4uk9tm5o 2013-01-14 15:43:22, Info 2013-01-14 15:43:22, Info 2013-01-14 15:43:22, Info 2013-01-14 15:43:22, Info 2013-01-14 15:43:23, Info and then filtered the results to a file. There are several errors that were flagged that could not be repaired. They seem to be related to an update "Package_83_for_KB2769165".
fix the files?
CSI 0000030d [SR] Verifying 100 (0x00000064) components
CSI 0000030e [SR] Beginning Verify and Repair transaction
CSI 0000030f Hashes for file member \SystemRoot\WinSxS\x86_prncacla.inf_31bf3856ad364e35_6.2.9200.16430_none_a1af7694d303e9dc\I386\CNBJ2530.DPB do not match actual file [l:34{17}]"I386\CNBJ2530.DPB" :
yYcvbi9VbkRxejcqVHTrvt1WZoWcPIlOeII=} Expected: {l:32 b:n520k714Uu3utHa5JGQ6HQYbZphKhlMWq5pEmfnCDuw=}
CSI 00000310 [SR] Cannot repair member file [l:34{17}]"I386\CNBJ2530.DPB" of prncacla.inf, Version = 6.2.9200.16430, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type = [l:24{12}]"driverUpdate", TypeName neutral, PublicKey neutral in the store, hash mismatch
CSI 00000311 Hashes for file member \SystemRoot\WinSxS\x86_prncacla.inf_31bf3856ad364e35_6.2.9200.16430_none_a1af7694d303e9dc\I386\CNBJ2530.DPB do not match actual file [l:34{17}]"I386\CNBJ2530.DPB" :
yYcvbi9VbkRxejcqVHTrvt1WZoWcPIlOeII=} Expected: {l:32 b:n520k714Uu3utHa5JGQ6HQYbZphKhlMWq5pEmfnCDuw=}
CSI 00000312 [SR] Cannot repair member file [l:34{17}]"I386\CNBJ2530.DPB" of prncacla.inf, Version = 6.2.9200.16430, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type = [l:24{12}]"driverUpdate", TypeName neutral, PublicKey neutral in the store, hash mismatch
CSI 00000313 [SR] This component was referenced by [l:160{80}]"Package_83_for_KB2769165~31bf3856ad364e35~x86~~6.2.1.0.2769165-10628_neutral_GDR"
CSI 00000314 [SR] Verify complete
CSI 00000315 [SR] Verifying 100 (0x00000064) components
CSI 00000316 [SR] Beginning Verify and Repair transaction
CSI 00000317 [SR] Verify complete
CSI 00000318 [SR] Verifying 100 (0x00000064) components
CSI 00000319 [SR] Beginning Verify and Repair transaction
CSI 0000031a [SR] Verify complete
CSI 0000031b [SR] Verifying 100 (0x00000064) components
CSI 0000031c [SR] Beginning Verify and Repair transaction
CSI 0000031d [SR] Verify complete
CSI 0000031e [SR] Verifying 100 (0x00000064) components
CSI 0000031f [SR] Beginning Verify and Repair transaction
CSI 00000323 [SR] Verify complete
CSI 00000324 [SR] Verifying 67 (0x00000043) components
CSI 00000325 [SR] Beginning Verify and Repair transaction
CSI 00000326 [SR] Verify complete
CSI 00000327 [SR] Repairing 1 components
CSI 00000328 [SR] Beginning Verify and Repair transaction
CSI 00000329 Hashes for file member \SystemRoot\WinSxS\x86_prncacla.inf_31bf3856ad364e35_6.2.9200.16430_none_a1af7694d303e9dc\I386\CNBJ2530.DPB do not match actual file [l:34{17}]"I386\CNBJ2530.DPB" :
yYcvbi9VbkRxejcqVHTrvt1WZoWcPIlOeII=} Expected: {l:32 b:n520k714Uu3utHa5JGQ6HQYbZphKhlMWq5pEmfnCDuw=}
CSI 0000032a [SR] Cannot repair member file [l:34{17}]"I386\CNBJ2530.DPB" of prncacla.inf, Version = 6.2.9200.16430, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type = [l:24{12}]"driverUpdate", TypeName neutral, PublicKey neutral in the store, hash mismatch
CSI 0000032b Hashes for file member \SystemRoot\WinSxS\x86_prncacla.inf_31bf3856ad364e35_6.2.9200.16430_none_a1af7694d303e9dc\I386\CNBJ2530.DPB do not match actual file [l:34{17}]"I386\CNBJ2530.DPB" :
yYcvbi9VbkRxejcqVHTrvt1WZoWcPIlOeII=} Expected: {l:32 b:n520k714Uu3utHa5JGQ6HQYbZphKhlMWq5pEmfnCDuw=}
CSI 0000032c [SR] Cannot repair member file [l:34{17}]"I386\CNBJ2530.DPB" of prncacla.inf, Version = 6.2.9200.16430, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type = [l:24{12}]"driverUpdate", TypeName neutral, PublicKey neutral in the store, hash mismatch
CSI 0000032d [SR] This component was referenced by [l:160{80}]"Package_83_for_KB2769165~31bf3856ad364e35~x86~~6.2.1.0.2769165-10628_neutral_GDR"
CSI 0000032e [SR] Repair complete
CSI 0000032f [SR] Committing transaction
CSI 00000334 [SR] Verify and Repair Transaction completed. All files and registry keys listed in this transaction have been successfully repaired

Please run the new DISM command instead:
DISM /Online /Cleanup-Image /RestoreHealth
it can download missing files.
"A programmer is just a tool which converts caffeine into code"
The DISM command doesn't work in an environment that runs Windows Server Update Services, unless you configure the
Specify settings for optional component installation and component repair setting:
http://technet.microsoft.com/en-us/library/hh825020.aspx#BKMK_SetGPO
The default source location is Windows Update. Before configuring this, the output is displayed as below:
C:\Windows\system32>dism /online /cleanup-image /restorehealth
Deployment Image Servicing and Management tool
Version: 6.3.9600.16384
Image Version: 6.3.9600.16384
[==========================100.0%==========================]
Error: 0x800f0906
The source files could not be downloaded.
Use the "source" option to specify the location of the files that are required to restore the feature. For more information on specifying a source location, see
http://go.microsoft.com/fwlink/?LinkId=243077.
The DISM log file can be found at C:\Windows\Logs\DISM\dism.log
When configuring Specify settings for optional component installation and component repair, select
Contact Windows Update directly to download repair content instead of Windows Server Update Services (WSUS).
Run the DISM command again and the operation will complete successfully.
or use note pad create a repair.bat file, copy and paste the text, run as admin.
net stop wuauserv
cd %systemroot%\SoftwareDistribution
ren Download Download.old
net start wuauserv
net stop bits
net start bits
net stop cryptsvc
cd %systemroot%\system32
ren catroot2 catroot2old
net start cryptsvc
Then try this again
DISM /Online
/Cleanup-Image
/RestoreHealth
http://answers.microsoft.com/en-us/windows/forum/windows_8-windows_update/dismexe-online-cleanup-image-restore-health-failed/668ef107-5f4c-4959-ba93-76d052452315
Edit: I had the same error code as you not to long ago, the above repairbat fixed that problem.
Little easier then configuring paths and running dism. I have fixed the error doing it that way too. Below is the link how to my how to. check my post
http://social.technet.microsoft.com/Forums/windows/en-US/d126a392-1491-4371-962c-1d1269806aff/win-81-pro-dism-online-cleanupimage-restorehealth-returns-error-14098?forum=w8itprogeneral#f2ae2d58-aad6-446a-a648-b709ec87b5d2

Servers where patches will not install automatically or manually, Live updates are broken and when checking installed updates shows "NO UPDATES ARE INSTALLED ON THIS COMPUTER" SFC \SCANNOW will not run

Hello, (Bit of a long one but please read)
We have 3 servers in same physical location and server OU etc that are exhibiting the exact same behaviors (we have server servers in this location that are not), as above theyt are all W2008 R2 SP1 and all built from the same standard
image we use on hundreds of other computers, they have also been in production for different amounts of time and we started to see this behavior at different times with them: (Its odd they are all in the same site where there are also several other servers
that are not effected, there must be a link ? )
These servers are all missing several patches when checking our internal tool that reports from IBM endpoint management that we use to deliver patches (they are not all missing the exact same patches some ore or less than other), although
SCCM (we used SCCM to deliver patches until around 6 months ago) and IBM EM are both running (some ptches hark back to the SCCM Delievry days) they are not patching and when attempting to patch manually by downloading the exact patch coresponding to the fixlet
ID and the KB , the stanbdalone installer starts and after some time you receive an error message “The update is not applicable to yoru computer”. Windows update returns error 80070006 for all of the servers.
it is worth noting that other applications and products also using the .MSU extension will insatll so it is not a problem with the installer service.
The above led me to think a corrupt patch may have stopped the sequence of patching so I then looked in “Programs and Features” => “Installed updates” and this is blank for all of them returening the message:
“NO UPDATES ARE INSTALLED ON THIS COMPUTER”. (this I believe is a part of the fundamental issues and resolving this may resolve the patching)
Another issue is that if you run “SFC /SCANNOW” It starts the scan and then returns: “Windows Resource Protection could not perform the requested operation” (Also in safe mode and both from an elevated CMD and WMI is started as a service)
The all three are probably related so I think fixing the “SFC and NO UPDATES SHOWN” issues will resolve the first.
The things I have tried so far are:
Running : wmic qfe list full /format:htable > c:\updates.htm Should produce a list of updates but instead returns : No Instance(s) Available (this is not hopeful)
Fix: Ran the “SYSTEM UPDATE REDINESS TOOL” from http://support.microsoft.com/kb/947821
Result : Update Ran successfully but NO CHANGE
Fix: Ran the automated and manual fix “RESET WINDOWS UPDATE COMPONENTS” here :
http://support.microsoft.com/kb/971058/en then undated windows update agent.
Result : All ran successfully and NO CHANGE
Fix: Ran MBSA
Result : Runs successfully and then stays at “Done downloading security update information” (Log gives no obvious information)
Fix: Renamed the software distribution folder/restarted services (Various variations of this fix online, tried a few)
Result: Runs as described in article with new Software distribution folder being created,
NO CHANGE
Fix: Create/Correct the reg key for windows trusted installer located here HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Component Based Servicing\Version (several articles relating to this and the above issues)
Result: the existing key was correct as should be from internal system information gathered , required in article.
Fix: Ran the “Windows update trouble-shooter”
as here :
http://windows.microsoft.com/en-us/windows/troubleshoot-problems-installing-updates#1TC=windows-7
Result: It detected and fixed error’s but still no change.
The WMI Repository checks out on them all for both of the methods I know to verify “Get-wmiobject –list |measure” and ensure count is over 900 and also “C:\>winmgmt /verifyrepository” and the repository came back as “WMI Repository is consistent”. I guess
this is not hard evidence the WMI is OK, but these are the only methods I know.
I have also tried removing the server from its OU , running a GP Update and then rebooting and testing but to no avail (Bit of a longshot but tried to link the distinction between the three servers and the OU GP is one of them)
I have tried a few other articles registering .Dll’s etc , but I did not take a note of links as I was at the start of this and didn’t expect it to go so long so please reply with anything you see not above im happy to try again.
I have thought about removing SP1 and reinstalling it but this will require a major downtime and only possible if the backup files of SP1 have not been removed.
Any help is apreciated !

Hi,
Please try to rebuil the WMI repository.
For detailed information, please refer to the blog below,
http://blogs.technet.com/b/askperf/archive/2009/04/13/wmi-rebuilding-the-wmi-repository.aspx
If issue persists, due to sfc doesn't work, could you try to repair your system with the installation disk?
Best Regards.
Steven Lee
TechNet Community Support

Windows 7 won't boot or run sfc /scannow - says repair in

I upgraded my HP laptop from Vista to Windows 7 and it has been working for a year. This morning the laptop will not boot up and when I run repair it runs it over and over and will not boot up. I run the diagnostics on the hard drive it gets to about 8%
and then stops with #10008 Replace Hard Disk and then SMART Hard Disk Passed. I get into the Windows 7 repair page and run it over and over with no results and it does not list an any operating systems on System Recovery Page. On the System Recovery Options
page it says Operating System unknown. It does not allow System Restore either. I can get the command prompt (X:\windows\system32) but when I try to run sfc /scannow it will not let me because there is a system repairpending that requires a reboot to
coomplete, and so it goes over and over. I tried using my Windows 7 Home Premium upgrade disk but that does not help. I would re-install it but it will not let me do an installation unless I boot the system from the computer and not the DVD. It seems
like I am in a continuous loop to start out 2012 and I do not know how to get out of it. Any help would be great appreciated.

Mark, thanks for your response. I had no success with the others.
•If it can't do anything, select "Command Prompt"
•Please make sure you follow the instructions of this guide exactly as given or you might risk more
problems.
NOTE; Make sure you press Enter after each command.
Make sure all commands are exactly as shown in this guide, including "spaces".
First, we will start off with this command.
Quote
bootrec /RebuildBcd
I did this and got a different result
Total Identified Windows Installation: 1
[1] C:\ Windows
Add Installations to boot list? Yes (Y), No (N), All (A)=
I tried Yes and it responded This requested system device cannot be found.
I formatted the C: portion of disk and reinstalled Windows 7 Premium Home Edition from scratch and went through setting it all up and over 90 updates, including SP1 and things seem to go fine. System rebooted a number
of times and it was working. Then out of nowhere went restarting on an update it went right back to where I started before. It appears through various operations I loose communications to the Boot file. When I read some of the reports I get the No Bootable
Device available 0x3bc3.
I run the repair disk over and over and then get it to run again.
The difference now is that all the Memory and Hard Drive tests run to completion and say OK. The last time that it happened I got a momentary blue screen that was gone before I knew it and I was back again to where I started. I am
not running chkdisk on C: again and it seems to be doing OK.
Any more ideas for me. I did remove and reseat the hard drive WD3200 just to be sure connections were OK before I formatted and started from scratch. Seems to me that the boot record is out there but I cannot get to it.
Thanks, Dave

Win 8.1 sfc /scannow returns Windows Resource Protection could not perform the requested operation.

I am running Windows 8.1 Pro.
I have been experiencing problems that lead me to believe the my component store is corrupted.
When I run sfc /scannow sfc immediately comes back with "Windows Resource Protection could not perform the required operation.
Here are the entries in the CBS file
TI: --- Initializing Trusted Installer ---
2014-01-21 10:45:59, Info                  CBS    TI: Last boot time: 2014-01-21 10:28:05.492
2014-01-21 10:45:59, Info                  CBS    Starting TrustedInstaller initialization.
2014-01-21 10:45:59, Info                  CBS    Ending TrustedInstaller initialization.
2014-01-21 10:45:59, Info                  CBS    Starting the TrustedInstaller main loop.
2014-01-21 10:45:59, Info                  CBS    TrustedInstaller service starts successfully.
2014-01-21 10:45:59, Info                  CBS    No startup processing required, TrustedInstaller service was not set as autostart
2014-01-21 10:45:59, Info                  CBS    Startup processing thread terminated normally
2014-01-21 10:45:59, Info                  CBS    Starting TiWorker initialization.
2014-01-21 10:45:59, Info                  CBS    Ending TiWorker initialization.
2014-01-21 10:45:59, Info                  CBS    Starting the TiWorker main loop.
2014-01-21 10:45:59, Info                  CBS    TiWorker starts successfully.
2014-01-21 10:45:59, Info                  CBS    TiWorker: Client requests SFP repair object.
2014-01-21 10:45:59, Info                  CBS    Universal Time is: 2014-01-21 16:45:59.014
2014-01-21 10:45:59, Info                  CBS    Open of SC_BOOT_SERVICING_DONE event failed 2
2014-01-21 10:45:59, Info                  CBS    Loaded Servicing Stack v6.3.9600.16470 with Core: C:\WINDOWS\winsxs\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.3.9600.16470_none_fa2491fd9b3cfcb2\cbscore.dll
2014-01-21 10:45:59, Info                  CSI
00000001@2014/1/21:16:45:59.016 WcpInitialize (wcp.dll version 0.0.0.6) called (stack @0x7ffa54fd5929 @0x7ffa55266bda @0x7ffa55269a06 @0x7ff74300d25f @0x7ff74300dc17 @0x7ffa800d2385)
2014-01-21 10:45:59, Info                  CBS    SQM: Initializing online with Windows opt-in: False
2014-01-21 10:45:59, Info                  CBS    SQM: Cleaning up report files older than 10 days.
2014-01-21 10:45:59, Info                  CBS    SQM: Requesting upload of all unsent reports.
2014-01-21 10:45:59, Info                  CBS    SQM: Failed to start upload with file pattern: C:\WINDOWS\servicing\sqm\*_std.sqm, flags: 0x2 [HRESULT = 0x80004005
- E_FAIL]
2014-01-21 10:45:59, Info                  CBS    SQM: Failed to start standard sample upload. [HRESULT = 0x80004005 - E_FAIL]
2014-01-21 10:45:59, Info                  CBS    SQM: Queued 0 file(s) for upload with pattern: C:\WINDOWS\servicing\sqm\*_all.sqm, flags: 0x6
2014-01-21 10:45:59, Info                  CBS    SQM: Warning: Failed to upload all unsent reports. [HRESULT = 0x80004005 - E_FAIL]
2014-01-21 10:45:59, Info                  CBS    NonStart: Set pending store consistency check.
2014-01-21 10:45:59, Info                  CSI
00000002@2014/1/21:16:45:59.020 WcpInitialize (wcp.dll version 0.0.0.6) called (stack @0x7ffa54fd5929 @0x7ffa652e7fc0 @0x7ffa652e80f2 @0x7ff74300c9a5 @0x7ff74300dc2e @0x7ffa800d2385)
2014-01-21 10:45:59, Info                  CSI    00000003 No store version format found; DLL store format 0.0.0.6
2014-01-21 10:45:59, Error                 CSI
00000004@2014/1/21:16:45:59.027 (F) base\wcp\componentstore\storelayout.cpp(3854): Error STATUS_SXS_COMPONENT_STORE_CORRUPT originated in function ComponentStore::CRawStoreLayout::OpenCanonicalDataKey expression:
(null)
[gle=0x80004005]
2014-01-21 10:45:59, Info                  CBS    Added C:\WINDOWS\Logs\CBS\CBS.log to WER report.
2014-01-21 10:45:59, Info                  CBS    Added C:\WINDOWS\Logs\CBS\CbsPersist_20140121102547.cab to WER report.
2014-01-21 10:45:59, Info                  CBS    Added C:\WINDOWS\Logs\CBS\CbsPersist_20140114224141.cab to WER report.
2014-01-21 10:45:59, Info                  CBS    Added C:\WINDOWS\Logs\CBS\CbsPersist_20140104132548.cab to WER report.
2014-01-21 10:45:59, Info                  CBS    Added C:\WINDOWS\Logs\CBS\CbsPersist_20131220204514.cab to WER report.
2014-01-21 10:45:59, Info                  CBS    Added C:\WINDOWS\Logs\CBS\CbsPersist_20131215075547.cab to WER report.
2014-01-21 10:45:59, Info                  CBS    Could not get active session for current session file logging [HRESULT = 0x80004003 - E_POINTER]
2014-01-21 10:45:59, Info                  CBS    Not able to add pending.xml to Windows Error Report. [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2014-01-21 10:45:59, Info                  CBS    Not able to add pending.xml.bad to Windows Error Report. [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2014-01-21 10:45:59, Info                  CBS    Failed to get CSI system store [HRESULT = 0x80073712 - ERROR_SXS_COMPONENT_STORE_CORRUPT]
2014-01-21 10:45:59, Info                  CBS    CSI store consistency check fails. [HRESULT = 0x80073712 - ERROR_SXS_COMPONENT_STORE_CORRUPT]
2014-01-21 10:45:59, Info                  CBS    Failed to load component store [HRESULT = 0x80073712 - ERROR_SXS_COMPONENT_STORE_CORRUPT]
2014-01-21 10:45:59, Info                  CSI    00000005 No store version format found; DLL store format 0.0.0.6
2014-01-21 10:45:59, Error                 CSI
00000006@2014/1/21:16:45:59.051 (F) base\wcp\componentstore\storelayout.cpp(3854): Error STATUS_SXS_COMPONENT_STORE_CORRUPT originated in function ComponentStore::CRawStoreLayout::OpenCanonicalDataKey expression:
(null)
[gle=0x80004005]
2014-01-21 10:45:59, Info                  CBS    Added C:\WINDOWS\Logs\CBS\CBS.log to WER report.
2014-01-21 10:45:59, Info                  CBS    Added C:\WINDOWS\Logs\CBS\CbsPersist_20140121102547.cab to WER report.
2014-01-21 10:45:59, Info                  CBS    Added C:\WINDOWS\Logs\CBS\CbsPersist_20140114224141.cab to WER report.
2014-01-21 10:45:59, Info                  CBS    Added C:\WINDOWS\Logs\CBS\CbsPersist_20140104132548.cab to WER report.
2014-01-21 10:45:59, Info                  CBS    Added C:\WINDOWS\Logs\CBS\CbsPersist_20131220204514.cab to WER report.
2014-01-21 10:45:59, Info                  CBS    Added C:\WINDOWS\Logs\CBS\CbsPersist_20131215075547.cab to WER report.
2014-01-21 10:45:59, Info                  CBS    Could not get active session for current session file logging [HRESULT = 0x80004003 - E_POINTER]
2014-01-21 10:45:59, Info                  CBS    Not able to add pending.xml to Windows Error Report. [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2014-01-21 10:45:59, Info                  CBS    Not able to add pending.xml.bad to Windows Error Report. [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2014-01-21 10:47:59, Info                  CBS    Trusted Installer is shutting down because: SHUTDOWN_REASON_AUTOSTOP
2014-01-21 10:47:59, Info                  CBS    TiWorker signaled for shutdown, going to exit.
2014-01-21 10:47:59, Info                  CBS    Ending the TiWorker main loop.
2014-01-21 10:47:59, Info                  CBS    Ending the TrustedInstaller main loop.
2014-01-21 10:47:59, Info                  CBS    Starting TiWorker finalization.
2014-01-21 10:47:59, Info                  CBS    Starting TrustedInstaller finalization.
2014-01-21 10:47:59, Info                  CBS    Ending TrustedInstaller finalization.
2014-01-21 10:47:59, Info                  CBS    Ending TiWorker finalization.
Is there a way to rebuild the component store?
Thanks,
Glen

Hey Glen,
This log shows the exact same error that is mentioned in the comments of
this blog post, and the response is:
joscon [Microsoft]
joscon [Microsoft]
Thanks. Unfortunately, this isn't good news. The CanonicalData key is missing.
2013-08-05 11:08:32, Error CSI 00000004@2013/8/5:09:08:32.471 (F) base\wcp\componentstore\storelayout.cpp(3617): Error STATUS_SXS_COMPONENT_STORE_CORRUPT originated in function ComponentStore::CRawStoreLayout::OpenCanonicalDataKey
expression: (null)
[gle=0x80004005]
Unfortunately, its a small, but unrecreatable subset of data. If this is missing, servicing is broken on the machine and the system will need to be restored from backup or PBR.
So you will need to try a refresh or a re-install of Windows, unfortunately.
Hope this helps,
David
Windows Outreach Team - IT Pro
The Springboard Series on TechNet

H8-1520t: sfc /scannow reported file corruption in Windows 8.1

My computer (h8-1520t) computer had had file corruption error reported by sfc /scannow.
The corruption was rather common corruption as discovered elsewhere on the internet. The corruption pertained to prncacla.inf and it was repaired only by using DISM.exe /Online /Cleanup-image /Restorehealth. The corruption occured while the computer was doing automatic maintenance which locked up my system. After forcing a shutdown and rebooting, I immediately ran sfc /scannow and that's when the corruption was first detected.
Now sfc /scannow finds no corruption and automatic maintence runs to completion.
Since this is a rather common corruption error and there's no explanation as to what causes the problem, should I send my computer, which it's still under warranty, back to HP ---or--- did I corrected the corruption properly ? ? ?
On additional question: What on earth causes that common corruption to occur anyway.
Also: UEFI diagnostics extensively run and the extensive testing revealed no problems with system board, hard drive, memory, processor (i7-3770), graphics card memory (Radeon HD 8570).
If I should be concerned about my computer being a dud and lemon, I'd like to know... Or, did I fix the corruption correctly?
Thanks,
Mark

Hi Mark,
You may want to review this article.
If you are not comfortable with the Windows repair process then you can use the external HP recovery media to reload you PC back to a day one factory fresh condition. Backup your data before doing so.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Java.rmi.server.SkeletonMismatchException: interface hash mismatch

I am trying to get a MBORemoteSet from the session, which actually gives me the list from the database table. when i click on a combo box returning me the list using the MBOSetRemote object it throws me the exception.
could not load the labor codes from Maximo
java.rmi.ServerException: RemoteException occurred in server thread; nested exception is:
     java.rmi.server.SkeletonMismatchException: interface hash mismatch
java.rmi.server.SkeletonMismatchException: interface hash mismatch
at sun.rmi.transport.StreamRemoteCall.exceptionReceivedFromServer(StreamRemoteCall.java:240)
at sun.rmi.transport.StreamRemoteCall.executeCall(StreamRemoteCall.java:215)
at sun.rmi.server.UnicastRef.invoke(UnicastRef.java:349)
at worktech.app.labor.WTLaborSet_Stub.setWhere(Unknown Source)

Well this error occurs if the RMI files are different on the server and client side.
It basically tells you that the stub and skeleton don't match with each other. Get the latest version of the RMI jar file or whatever file you are using on the server side to replace the file you are using oon the client side. This would make stub and skeletons to communicate with each other effectively . enjoy :)

Os x mountain lion, i got the message "hash mismatch", the icon then disappeared.

I was downloading the os x mountain lion, i then got the message that download is interrupted hash mismatch. i restarted my macbook, then the mountain lion icon disappeared from the purchased item list in my app store. however, it is shown that i have purchased it in the purchase history.
please help.

http://www.apple.com/support/mac/app-store/contact

HASH MISMATCH. Yes, I know there are 100 threads about this!

Hello,
Well, as I read on the forums, this problem seems to be common, and it doesn't have a clear solution. So, I don't care if they say they don't know. There IS a big problem, and they are not giving very helpful answers.
Recently I was feeling nostalgic and bought the game Star Wars: Knights of the Old Republic, everything went fine until it reached 200mb downloading. Then as you know the Hash Mismatch error appeared.
I've tried everything, from changing ISPs, to resetting the router/modem.
I have already sent a ticket about this, but clearly they are NOT solving the problem.
We are a lot, so please, don't just look the other way Apple.
Thank you all,
Martin

I am aware of this particular error that folks are seeing... it's perplexing espcially if you haven't downloaded the app previosuly.
If you haven't done so, you could try deleting the cache associated with the App Store.
Go to ~/Library/Caches/com.apple.appstore/Cache.db
Move the Cache.db file from the com.apple.appstore folder to the Trash.
Restart your Mac.
One other thing to try... is to startup in Safe Mode
That deletes system caches that may help.
A Safe Mode boot take a bit longer then a normal boot, be patient.
Once you see the Desktop, click the Apple menu top left corner of the screen then click Restart.

I keep getting "hash mismatch" when trying to download Mountain Lion from the App store

I've been trying to download the new Mountain Lion from the App Store & keep getting "hash mismatch" message. I was able to download on my 1 computer, but no luck on the 2nd computer, which is up-to-date on all updates & software. Support even put a fresh copy of the App in my account & I still get that same message. Someone suggested AppCleaner, but how do you delete the OS to re-install the new. Didn't think that was possible. Any suggestions - I've tried quitting & logging out of the App Store & even re-starting (several times)

- Temporarily disable anti virus software if installed.
- Apps such as Little Snitch, Net Nanny, and Hands Off can prevent apps from downloading including Mountain Lion.
How to re download apps from the Mac App Store:
Open the App Store. From the menu bar click Store > Sign In
Click Purchases from the top of the App Store window.
Select Mountain Lion. Then right or control click where you see Installed then click Install.
Make sure and use the same Apple ID used for the original purchase.

TS1702 hash mismatch error when downloading OS X Mountain Lion

I have an updated system for mac pro (bought first week of June 2012). Was trying to download OS X Mountain Lion several times but I keep getting the "can't download app hash mismatch" error notification. Would appreciate helpful tips!

http://www.apple.com/support/mac/app-store/contact.html?form=account

SFC /scannow Hash mismatch

Similar Messages

Maybe you are looking for