SFDC as Source System to SAP BW
Hi All,
I have a requirement to pull SFDC (Sales Force Dot Com) data to SAP BW (7.3), please suggest what is the best way to do this. I need to have delta capability in the extraction process as must. Thanks a lot.
NIlesh,
I appreciate the refference. After reviewing the tread it appears they are actually trying to migrate data in the opposing direction. They are trying to utilize SAP BW data within Manu, where as I am hoping to automate data extraction from Manu -> BW.
Thank you very much,
Edited by: Matthew Cohen on Sep 2, 2010 9:31 PM
Similar Messages
-
Error after restoring source system in SAP BI side
Dear all,
i am getting issue while restoring sap source system through sap bI
"Connection LA is used in the 'LD1CLNT010'
source system as a connection 'LB1CLNT400' to BW."
Do you want to delete this connection in the source system?
Connection Is Restored After It Has Been Deleted Successfully
it asked me delete or do not delete
what to do nexthi,
you need to ensure that source system to BW is restored properly .
check in TABLE RSBASIDOC in BW through transaction se11/se16.every source system entry must be here with repect to BW.
If source system entry is missing then there are issues.Normally BASIS Team makes entry.restores system
you cn also check in RSA1-->SOURCE SYSTEM.Here u must find your R3 system name.
hope it helps
thanks,
nilesh -
How to Reconcile Data Between SAP Source Systems and SAP NetWeaver BI
Hi,
I just read "How to Reconcile Data Between SAP Source Systems and SAP NetWeaver BI". While I'm waiting for more authorisation to r/3 to carry it out and test this functionality.
I'd like to ask a question to anyone who has implemented this type solution. On page 10 it talks about creating a view then setting up the datasource. The solution talks about runnig a query. I suspect when we run a query I would run it for only a period(using variable) to reconcile.
My question is this. Will the datasource extractor on /r3 only select the period in our variable or will it do a full selection of the data which would then be passed to BW for filtering?
RegardsDEar Mark,
There are several avenues where you can see and reconcile your data with source system, u can see data in by tcode RSA3 for a datasource, and compare the values with actual document posted into the R/3 system. Respective fuctional consultant canhelp you a lot to confirm the data.
On BW side u can see the data in PSA and then check tranformations which subsequent change/update/reject data records based on the selective conditions.
hope this helps.
Kindly assign the points if it works.
Revert back if u need futher help/information. -
How to merge key field from external source system with SAP R/3 master
Hi,
In SAP BW 7.0 system, our scenario is Master Data for 0GL_ACCOUNT is coming from SAP R/3 alongwith the Transactional data records for standard FI cubes. Then, one more set of transaction data is coming from external source system, a flat file, into another custom DSO(ZDSO_FI), which also has this GL Account field.
This flat file's GL account, GL_file, has to be basically mapped/merged with the standard 0GL_ACCOUNT field so that at the time of loading the transactional data for custom DSO, ZDSO_FI (with transformation mapping GL_file > 0GL_ACCOUNT), system automatically refers to the 0GL_ACCOUNT master data to load these incoming transactional values, from the external flat file system. How can this be done?
To illustrate the scenario, say I have 5 records in 0GL_ACCOUNT, loaded from SAP R/3 into SAP BW-
0GL_ACCOUNT Short Description Source System
100 D1 R/3
200 D2 R/3
300 D3 R/3
400 D4 R/3
500 D5 R/3
Now suppose if my flat file has following sample transactional data, to be uploaded in SAP BW ZDSO_FI-
GL_file Key Figure1
400 789
200 567
Then after uploading this transactional data in ZDSO_FI (with transformation mapping GL_file > 0GL_ACCOUNT), the 0GL_ACCOUNT data becomes as below-
0GL_ACCOUNT Short Description Source System
400
200
100 D1 R/3
200 D2 R/3
300 D3 R/3
400 D4 R/3
500 D5 R/3
So note that the system did not refer the incoming GL's from flat file, although the field is mapped to 0GL_ACCOUNT in transformation, to the already available master data. Rather created 2 new data rows for the GL accounts coming from external system. Because of this I am not able to perform the calculations common from standard FI cube and ZDSO_FI, with GL account as key field. I need to synchronise these data values based on GL Account to proceed with further calculation and am badly stuck.
Request if anyone can please throw some light on how to achieve this seemingly simple requirement?
Thanks in advance.
NirmitBetter post this thread is in the [Enterprise Data Warehousing|Data Warehousing; forum.
-
Error while assigning source system to SAP Remote cube
I need to do a query using remote cube and the source sys is flat file.
it wont let me assign the source system to the remote cube.
the r/3 system icon is seen next to the remote cube technical name...
I can't see my flatfile source system
can somebody help me.Hello Kiran,
I don't think its possible to use Remote cubes for PC_FILE or FLAT FILE as Source system.
You can use Virtual Providers in these different scenarios
Virtual Providers based on DTP => used for SAP source systems
Virtual Providers based on BAPI => used for non-SAP or external systems
Virtual Providers bsaed on Function modules => You use this VirtualProvider if you want to display data from non-BI data sources in BI without having to copy the dataset into the BI structures. The data can be local or remote. You can also use your own calculations to change the data before it is passed to the OLAP processor. This function is used primarily in the SAP Strategic Enterprise Management (SEM) application.
Use InfoObects as Virtual Providers
Your case is none of these.
More details can be found under this link:
http://help.sap.com/saphelp_nw70/helpdata/EN/84/497e4ec079584ca36b8edba0ea9495/frameset.htm -
Unable to Create Source System under 'SAP'
Hi,
We are on BI 7.0 and I am trying to create an R/3 Logical System (RSA1 - Source Systems - SAP - Create...)
But everytime I try to do that logical system is getting created under 'BI' folder (instead of 'SAP' folder). Do you know why this could happen?
Thanks.Hi SDNBI,
I have stumbled across the same phenomenon. Netweaver contains BI and ERP. When in the specific ERP system you want to create under the SAP folder you have in the past used the RSA1 transaction then the system thinks that this system should belong to BI folder. Hence it places that in BI folder. On the other hand when you have not executed RSA1 in the system you want to create then it should place it normally under the SAP folder because in that case it doesnt relate it to BI.
Hope that helps
Assign points if helpful.
Rgds
John -
How to change source system in SAP BI
Hi,
In Sap BI we are having a source system ECC1CLIENT100, based on this we developed all the data modelling, now due to some reasons we made a copy of the souce system ECC1CLIENT100 to ECC2CLIENT100 and we removed ECC1CLIENT100 from SAP BI connections, Now what changes we have to do to connect the ECC2CLIENT100 to BI in the place of ECC1CLIENT100, please give me step to step what to do for sucessfull operations, Both the clients are having different IP, SYSTEM ID,
Thanks in advance,Hi Bazi,
-->you need to maintain RFC to the new source system
-->delete old source system
-->create source system connection from RSA1
--> Run BDLS to point the data sources to new source system. This should be run on both BW and ECC.
You will need to run this BDLS several times
for more info check the below link
How to change the BI source system
http://help.sap.com/bestpractices/crossindustry/businessintelligence/v131/BBLibrary/documentation/B84_BB_ConfigGuide_EN_DE.doc
Regards
KP
Edited by: prashanthk on Aug 18, 2010 6:22 AM -
How to change the ECC Source system in SAP BI
Dear Experts,
In my BI development system instead of showing ECC development system as a source system it is showing ECC production system.
Now in my BI system I want to change the source system from ECC Production to ECC development.
Kindly explain me step by step to change the source system from ECC Production to ECC development.
Regards,
Suresh.Hi,
Ask your basis team to change source system entries.
They knows how to assign logical mappings.
Tx - BDLS.
Tables - RSLOGSYSMAP.
Try this way.
Bw, Tx - RSA1-->source system, Menu Tools - Conversion of logical system name and Assignment of source system to source system ID.
Thanks -
How to use SAP Business One as a source system for SAP BW 7.1
Dear Experts,
We have SAP Business One system as a transactional system. We need to connect the same to SAP BW so that we can deliever reports for this system in SAP BW. I want to know how the integration between these two systems work. Are there standard datasources created in SAP Business One which can be consumed directly in SAP BW like any other ABAP systems, or SAP Business needs to be connected using some ETL tool like UDConnect or Informatica?
Regards,
Aarati YadavHi Manoj,
Welcome to ADOBE Forms related Workflow Development. Well, here are my answers.
1) You can go for either go for ISR based development or WD development with Adobe form. In both the cases you can achieve your requirement. Yes, you will have to design the Adobe form and bind the fields to backend.
2) Am not clear or your System landscape to advice you in these regards.
3) Until final Submit/Approval is done, the data can be stored in WORKFLOW CONTAINERS or XML FORM(If you go for ISR based Development).
Hope this helps.
Regards
<i><b>Raja Sekhar</b></i> -
Configuration of SAP R/3 application component in Source system of SAP BW
Hi , Can someone guide me through the installation of SAP R/3 application components in SAP BW. It will highly appreciated if I can get some guidance on it.
SubramanianHi,
Please check the link below.
http://help.sap.com/bestpractices/BBLibrary/documentation/B03_BB_ConfigGuide_EN_DE.doc
Rgds,
Suman -
Source system icons changes when connecting SAP BW to mySAP ERP 2004
Hi,
Just an Interesting observation in relation to the creation of source systems in SAP BW to SAP Web AS 6.40 based systems (mySAP ERP 2004, mySAP SRM, etc).
I thought it would be interesting to share!
The behavior is logical but can be a surprise for a BW administrator who is not aware of the new internal SAP BW systems within mySAP ERP 2004.
Scenario:
The customer was connecting a stand-alone BW system to two new systems with latest and greatest mySAP ERP 2004 (ECC 5.00) and mySAP SRM.
Observation:
In the past the SAP R/3 source system would be created with a "SAP R/3 icon" indicating a SAP Source system.
<b>As of mySAP ERP 2004, the source systems will be created in the SAP BW standalone system with the "SAP BW System icon".</b>
Note: This is also the same behavior for new releases of mySAP SRM, and other SAP applications that are <u>based on SAP Web AS 6.40 or greater</u>
Why?:
The standalone SAP BW system is connecting to a system that contains an internal SAP BW system. The standalone SAP BW system determines that it is possible to extract <u>both</u> from the internal BW System <b>and</b> from the Plug-in extractors. It simply denotes that this source system is a SAP BW system and uses the BW Source system icon. (Remember SAP BW is client independent*!).
Note: This behavior will still occur even if you do not use the internal SAP BW system within mySAP ERP! It is there whether you use it or not.
Second Note: You can still use the ERP Content extractors from the mySAP ERP Source System as you did in prior releases.
Another related observation:
I would expect that this case will probably be true even if you only use the internal SAP BW.
Scenario: You use the internal SAP BW in another client in the mySAP ERP system than your ERP processing.
Result: The connection between the BW client and the ERP client source system(s) (i.e. client 001 for ERP, client 100 for BW), both the 'myself' and ERP client source systems, will show up as BW source systems!
Source system 001 and source system 100 will be displayed as SAP BW icons because SAP BW is client independent*
user master and authorizations are client dependent
I hope this was interesting.
Cheers,
Mike.Hello,
I used my user id to login. I recieved a message :
User already exists in source system I continue:
Anothre window pops up : "Check RFC connection" and it asks
'RFC connection already exists in source system . Do you want to check, use or cancel source system connection'
Here I select Use - but i get an error : Error in source system'.
how can i track down this error.
Kindly inform.
Regards,
Nikekab -
Data Flow from SAP Source (ECC) system to SAP BI system
Hi All,
I wanted to know how data will be flown from SAP Source system to SAP BI system.Data flow should include
1) Data will be flown by using the IDOCs?
2) What all are the interfaces involved while data is transferring?
3) What will happen exactly, if you execute the PSA?.
If you have any info on this, could you please post here....I
Regards,
K.Krishna Chaitanya.Hi Krishna,
Please go through this article :
"http://www.trinay.com/C6747810-561C-4ED6-B85C-8F32CF901602/FinalDownload/DownloadId-C2EB7035A229BFC0BB16C09174241DC8/C6747810-561C-4ED6-B85C-8F32CF901602/SAP%20BW%20Extraction.pdf".
Hope this answers all the mentioned questions.
Regards,
Sarika -
Both Source system and BI system under BI tab not comming under SAP tab
Dear Experts
we have installed ECC6.0EhP4 ABAP and Netweaver BI7.0EhP1 ABAP,with AIX6.1,Oracle11G, I am trying to make connectivity between two system
its done successfully,But I am facing following error
1.in BI and ECC i am seeing source system and BI system under BI tab, its not coming under SAP tab,and BI consultant saying they are not able to extract the data from ECC ,they want source system Under SAP tab,how to solve this
2.In BI system they unable to execute the query ( I have applied GUI7.20 BI patch and Query patch) for this do we need JAVA stack?? kindly advice me
Regards
krishna
Edited by: krishna murthy on Mar 31, 2011 8:36 AMthank you very much after gone through that Snote 1087980
problem got solved
Enter the following values
I_BIW_LOGSYS GDVCLNT200
I_OLTP_LOGSYS GDVCLNT200
I_FORCE_DELETE <X>
< DO NOT ENTER ANY VALUE IN THE FIELD - RFC target sys !!!!! >
Go to RSA1-> Source systems in the BI system connected to the ECC
system.
Select the ECC source system and select RESTORE in the right click
menu.
thanks
regards
krishna -
Problem in R/3 Source System
Hi,
I requested basis Guy to create R/3 Source system.
He created, But when I want to Replicate the Data sources,
When I double click the R/3 Source System
I will get this Messege
" <b>There is no application component hierarchy
in BW for source system &1.
Load application component hierarchy from the source system now?</b> "
I won't get the Hierarchy and I won't see any Data sources here?
what is the problem?
Even My basis Gye says , R/3 Source System working Fine , he says I need to do some configuration.
Please Help me
Thanks
PriyaHi Eugene,
I previously selected OK button, but i couldn't get the Data sources Hierarchy?
what is the problem?
i am using ECC.5.0.
I selected the Source system Right click then I selected CHECK, i received the message
Source system connection OK.
if source system connection is good why don't i get the data sources?
Basis Guy selected Below option to create Source System
<b>SAP System From Release 3.0E (Automatic Creation)</b>
Source System Icon also looking different, In previous 3.XX we can see the Icon R/3,
but here R/3 Icon is not displayed.
I need to do any configuration for getting datasources?
please help me
Thanks
Priya -
Error occured in the source system
hi experts,
can you plz how to resolve this error
incorrect doc type ZSBB003 in the ALE defination of the source system.
system response
error when sending data to bi.Is the partner system profile incorrect? Please reconcile with table entries in RSBASIDOC. You can ask BASIS for assitance. Case A : Check RFCs via SM59. Configure IDoc settings via WE20 and WE21. If there's an issue with source system, restore & reactivate in RSA1 > Source System. SAP Note 325470 can also assit you for this method. Reference : http://goo.gl/t33d0
Maybe you are looking for
-
Connecting MacBook to an External Display
I have a mini dvi adaptor and DVI cable to connect my macbook to my LCD TV. What I want to do is watch movies (either in iDVD or not), downloaded video and anything else that is possible (extended desktop etc) So far, after connecting all the cables,
-
Need help for Adapter Specific Message Attributes in Receiver Email Adapter
We want to use Adapter Specifice Message Attributes(ASMA) in Receiver Email Adapter for sending the mails dynamically, and to set the CC and BCC. I have gone through the help give in <a href="http://help.sap.com/saphelp_nw04/helpdata/en/a5/1b5342d8a7
-
How to deal with--errors occurred, no packages were upgraded
This has only occurred to me once before, I think. I was running a pacman -Syu today and it was trying to upgrade kernel2612-cko2-swsusp2 with the new kernel26cko package. The old cko was installed by grabbing the pkgbuild, making and then installing
-
Duplex backup: getting one copy to complete
Using Oracle 10g R2. I am trying to set up a tape backup with 2 copies in a highly available environment. The media management software (IBM TDP for Oracle) is configured so that the copies are written to separate tape libraries. If one of the librar
-
i just got a palm pilot z22, and it won't sync. so far, this is what i've done: - set /dev/tts/USB1 as the port - added user to group tty - created 01-palm-udev.rules with: KERNEL=="ttyUSB[0-9]*", NAME="tts/USB%n", GROUP="users", MODE="0660" but noth