SFE2000 routing 2 networks to the same Internet connection

I have an SFE2000 operating in Layer 3 mode. I've set up 2 IP addresses on it which are the following:
IP: 172.20.72.22
mask: 255.255.248.0
IP: 172.20.80.252
mask: 255.255.255.0
Under the IP Routing section I've set up routing to the internet by putting in the following:
Destination IP: 0.0.0.0
Prefix: 0
Next Hop: 172.20.72.1 (ip of the internet router)
Client 1                            Client2
IP: 172.20.72.8                 IP: 172.20.80.206
Mask: 255.255.248.0         Mask: 255.255.255.0
Gateway: 172.20.72.22      Gateway: 172.20.80.252
Client 1 is able to get onto the internet, but Client 2 is not. What do I need to do in order for that to work?

I have an SFE2000 operating in Layer 3
mode. I've set up 2 IP addresses on it which are the following:
IP: 172.20.72.22
mask: 255.255.248.0
IP: 172.20.80.252
mask: 255.255.255.0
Under the IP Routing
section I've set up routing to the internet by putting in the following:
Destination IP: 0.0.0.0
Prefix: 0
Next Hop: 172.20.72.1 (ip
of the internet router)
Client 1                            Client2
IP:
172.20.72.8                 IP: 172.20.80.206
Mask:
255.255.248.0         Mask: 255.255.255.0
Gateway: 172.20.72.22
Gateway: 172.20.80.252
Client 1 is able to get onto the internet,
but Client 2 is not. What do I need to do in order for that to work?
Hi,
Just Check the natting is done for second subnet and what is the nat configuration on internet router
Hope to Help !!
Ganesh.H
Remember to rate the helpful post

Similar Messages

I just got a Mac and I use the same internet connection as my mom and my brother, who has an iPad. He can click on something that has my name and then Macbook Air, and is able to see everything on my computer screen. How do I fix this?

I just got a Mac and I use the same internet connection as my mom and my brother, who has an iPad. He can click on something that has my name and then Macbook Air, and is able to see everything on my computer screen. How do I fix this so he cant see what i am doing on my computer?

No, I made sure nothing was checked for that section when i found out he could see my screen. At the top it says "computers on your local network can access your computer at: blah blah". I think thats how hes doing it but i dont know how to fix it.

TS1470 why cant i connect to the itunes update server with my powerbook? my imac will on the same internet connection.

why cant my powerbook connect to the itunes server to download an update?

Hello johnbtrey,
I've linked an article that details a number of steps that can be followed in order to restore a connection to the iTunes Store on your PowerBook.
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
Symptoms
You may be completely unable to access the iTunes Store on your computer or iOS device. You might also see an alert message similar to one of the following:
"Cannot connect to the iTunes Store. An unknown error has occurred."
"We could not complete your iTunes Store request. The iTunes Store is temporarily unavailable. Please try again later."
"iTunes could not connect to the iTunes Store. Make sure your network connection is active and try again."
This article will guide you through the basic troubleshooting for the iTunes Store.
Cheers,
Allen

HT4199 I am having the problem of "connection timed out" suddenly after almost two years of use of the same internet connection.

I had left my apple to download an update on OS Lion overnight and found that the Mac had been disconnected from the internet with a window showing the words 'Connection timed out". I have tried all sort of stuff including turning off and switching on my modem, the Mac, deleting entirely the key chain access (at the loss of all my other passwords which I am now rebuilding), deleting the network in my Settings and trying Assist Me to register again, all in VAIN!
Please help.

Connection timed out to what? Everything? If so, then before wiping your disk, reinstalling, further deleting your keychain entries or other related activities, please check with your ISP and see if there's a network outage, or if you've exceeded some download quota.

Can you use FaceTime on the same wifi connection

My daughter and I are trying to FaceTime each other. We r both using the same Internet connection. When I FaceTime her on my ipad2 it's ringing from my end. But she is not reciveing any ringtone on her iPod touch. And when she tries to FaceTime me the same thing happens. Is it because where both connected to the same wifi?

What is a SW issue? The iPod is the latest one has the FaceTime app. We both have different email addresses. Also having trouble with I message my daughter recives my messages but goes to her email and not to her imessage and she can't send me messages. Always says not delivered.
Have tried everything.

Can I run 2 wireless networks on the same single internet connection?

I wanted to be able to use only my WRT350N to be able to broadcast "N" out into the yard but because it does not broadcast as far as the WRT54G I will have to settle on plan B.
I want to set up two wireless networks using my WRT54G V1 with a WSB24 and my new WRT350N wireless routers.
My last working setup was:
WRT350N with two 1Gb connections to my desktop computers in ports 1 & 2, my link to the WRT54G in port 3 and my HP printer in port 4. The address was changed to 192.168.1.50 and an encryption key used to secure the connection the N network to my laptop.
WRT54G with only the WSB24 connected to provide an unsecured 802.11g wireless connection. We live in the country and I am not worried about unauthorized access to this.
I have found that I can not make a stable wireless connection from the WRT350N past 50 ft. in the house and can not get a connection from this router out of the house. (hence the reuse of the WRT54G)
Still following?
My older router (WRT54G V1 and WSB24) allowed me to roam our yard out to about 175ft from the antennas with the 3945 Intel wireless adapter that is in my Gateway laptop. When I purchased the WUSB300N adapter for the "N" connection, I am able to get a 17% "G" signal in one of the outer buildings at about 200 ft from the WRT54G and not stable connection from the WRT350N past 50ft.
I was able to run the WRT54G as a gateway after changing its address to 192.168.1.51 and leaving the WRT350N at 192.168.1.50 before I updated the WRT350N to v1.03.6 last night and turned it into a brick.
That is talked about in a different thread.
This setup allowed me to connect to the internet outside of the house with the laptop.
Is there a better way to set this up?
Thanks for your help.
Message Edited by PapaBare on 08-24-2007 11:49 AM
Message Edited by PapaBare on 08-24-2007 12:12 PM

If I understand your request correctly it sounds like you want to create a VLAN, two different logical networks on the same physical network. If that's the case however, it would seem that neither the WRT54G nor the WRT350N supports VLAN, at least not without flashing the firmware on one or both of the devices. If you do choose to pursue flashing the firmware with third-party firmware that supports VLAN you might want to look into DD-WRT, HyperWRT, or some other firmware. Keep in mind flashing with third-party firmware voids your warranty with Linksys.
"Everybody save your work.......NOW!!"

I cannot connect my iPhone 4S to my home wifi. When trying to connect it says I have the wrong password, but I can connect my MacBook to the same network with the same password. I have tried to restart my router, reset my network settings, fail!

Hello, I am having some major troubles connecting my iPhone 4S to my home wifi. When I try to connect on my phone, it says I have an incorrect password. That's not possible because I can connect my MacBook to the same network with the same password. I have reset my network settings on my phone, reset my router, called apple support, triple checked I was trying it in correctly, I have no clue what's going on.
The only thing different is I just moved, but I have the same router/phone/internet provider.
I've seen some discussions of router security options being the problem, I have my router connected to : WPA-PSK [TKIP] + WPA2-PSK [AES].
The other options are: WEP , WPA-PSK[TKIP] , WPA2-PSK [AES] , WPA/WPA2 Enterprise.
My troubleshooting and understanding of all this is pretty limited, my applecare service did not help, please can anyone help me?
Thanks!

If the issue happened after an update, you may want to go into an Apple Store. Be sure to let them know exactly what's wrong with the device.

I am using several Macs running Yosemite. I was recently "upgraded" to Xfinity's new cable modem which can support both 2.5Ghz and 5Ghz networks at the same time. Actually I can connect to the internet over both with a satisfactory bump in speed for

I am using several Macs running Yosemite. I was recently “upgraded” to Xfinity’s new cable modem which can support both 2.5Ghz and 5Ghz networks at the same time. Actually I can connect to the internet over both with a satisfactory bump in speed for the Ghz. However when I connect to the 5Ghz the Time capsule disappears from the Airport Utility and claims to be Not Found. Is there something I have done wrong or just a Yosemite Teething Problem

First restart your mac and try again.
It could be
that the router and the TC are interfering wirelessly with each other.
You can check this by pressing the option key while clicking on the wireless icon on your screen
Open Wireless Diagnostics
enter your user password
Press CMD 4 then Scan
You will see all the wireless channels being used in your location and you can check if they are on the same channel
Make the SSID for the TC simple like MyTC
Set 5Ghz to auto
Update the TC
Try again
Ted

Can my flatemates sharing the same internet network sneak into my Mac

I share wireless network connection with other people. The wireless connection is set up by a BT HomeHub.
One of my flatemates is very nosy and his brother is an IT consultant. Something strange happened in the past while I was still using Windows XP - it made me suspect that they had sneaked into my files via the share internet connection (I didn't have any 'share files' in my PC. Also, I had Norton antivirus and firewall but I suspect it could only block out the intruders OUTSIDE the wifi network. ).
Now I use my iMac most of the time and use the same wifi network. Although Mac is in general more secure, I cannot stop wondering if people within the same network can still look at my desktop activities or look into my files if they tried hard enough ....
This has been in my mind for a while. Your knowledge can help to clear my worries. Thanks a lot!

wawalulu wrote:
Well ... there is no lock on my door ... but it's hard to imagine anyone being so low ...
Imagine it. Physical access = no security or privacy. You should create an encrypted disk image to store particularly sensitive documents and assume the other documents are public, more or less.
Also, you should probably turn on wireless encryption and use secure sites (https and sftp) whenever possible. Otherwise, anything you send over the Internet is plain text and easily viewable. Don't reuse passwords. Change your password regularly (don't worry too much if you forget it, after all, physical access = no security).
One more dumb question ;P ... Is there a firewall in my Mac OS? Where can I find it and check if it's on?
Many people (i.e. almost all) completely misunderstand the concept of a firewall. The purpose of a firewall isn't to keep people out, it is to allow them in. If you want security, don't run any of the Sharing services. Then, there is nothing to share and no way to remotely break in. The purpose of a firewall is to allow you to run lots of "private" sharing services and allow "public" access to selected ones. Unfortunately, the default settings allow access to all services being shared. What, then, is the point? Turn all sharing off. If you really need a shared service, do just a little bit of research on how to securely provide access to that service.

DSL Internet and Firewire Windows network at the same time?

I've got DSL internet via ethernet port on my Macbook and Firewire network with Windows, but it seems they can't work at the same time. If I turn DSL on first than firewire won't work and vice-versa. My guess that's because of the way MacOS X choose which port to use as Windows Sharing. Is there any way to choose manually which port to use?

I'll try to explain this problem as full as possible.
I've got DSL modem which is connected to Macbook via Ethernet port and Macbook is the only thing connected to modem. Then I've got Windows XP machine which work as storage. It doesn't have internet connection and I don't want to share my internet connection from Macbook with it. The only thing I want is File Sharing. Everything work fine if only Ethernet or Firewire plugged. The problem is they can't work together. If drag Built-in Ethernet to top then Mac tries to connect to Internet via Ethernet and it tries to do File sharing via Ethernet too. As the result Internet is working and file sharing is not (it sets ip address of file sharing to Ethernet's ip address). If I drag Built-in FireWire to top then Mac tries to connect to Internet via Firewire and it tries to do File sharing via FireWire too. As the result Internet is not working and file sharing is working (it sets ip address of Internet to FireWire's ip address). I think when Mac starts searching for networks according to Network Port configuration list it found first network and stops searching and network that I set on top is working and another is not. Maybe Mac can be only at one network at the same time? That's why I asked is there any way to set ports for Internet and File Sharing manually?

Can I be connected to two networks at the same time?

Hi there
I have an imac desktop with 10.5.8 running. I have a wireless network with my timecapsule and a printer connected to it. We have two mac computers in the house
that print wirelessly via this network. I also have the internet coming in via a wireless modem/wifi which both computers use to go online. The trouble is everytime I want to print from either computer I have to change back and forth from the internet/network to the timecapsule/printer network. This is really fumbly and I wind up having to restart all the time because the printer gets locked up. It's just a big hassle. Is there any way I can be on both of these networks at the same time or is there some other way I can configure this?
Thanks!

Is there any way I can be on both of these networks at the same time or is there some other way I can configure this?
Yes, you can reconfigure the Time Capsule (TC) to "Join a wireless network." In this case the wireless network would be the one created by the other wireless Internet router. In this configuration, the TC can still share its internal (and external) hard drive and a printer attached to the USB port. However, note that this would disable the TC as a router and an Ethernet switch so basically it will perform as a wireless client.

HT2497 Airport is not recognizing my wireless network because my wireless network has the same name as another apartment in my builing. I cannot change the name because my room mate controls it, is there any way I can make it find my wireless network?

It used to be that the other apartment with the same name didn't have theirs password protected so even though only one or the other would show up, I could always get onto one. Now, they have password protected theirs and it seems to be that 100% of the time only theirs shows up which I only can tell because it says "invalid password" when I try to connect to the Internet.
I have asked my room mate to just change the name of the network but she is really slow to do anything about it and I need to be able to get the internet at home and the internet is in her and set up through her computer so I really don't have any way of being the one to just go in and fix it myself.
Is there any other way to make Airport recognize that there are two different networks with the same way so it will find mine? I feel like I have tried everything including mannually typing in the name of my network and typing my password and it still just says "invalid password." I have also double checked that I was typing in the correct password and I am. My room mate is not having any problems accessing the Internet so I know the problem is not with our connection (she also has a Mac, almost the same model as me, I have a MacBook Pro purchased in 2011). I am also able to connect to the Internet on my Mac at coffee shops and the library so I know that the problem is not my computer or my wireless connection so I'm pretty sure it is just that Airport is somehow only recognizing one of the two "WLAN" networks
Any help???!

Hi - you can do what you want to do with AirPlay from your iPhone - but unfortunately it is not as easy as the people in the Apple store told you - your first problem is that you have a non Apple router - you cannot extend a non Apple router wirelessly with the Express - you can only join the network and connect an ethernet device to it - you can however connect via ethernet and have it create a wireless network of its' own - you can set this up from your iPhone or the XP - but this is a complicated setup and would involve many different discussion areas of this forum - therefore I would suggest that you use your 90 days of support and consult directly with Apple to do this - go to this link - http://www.apple.com/support/contact/

My iMac keeps on losing internet connection. Webpages get stuck after a minute or so. If I check the internet connection via diagnostics it seems to work just fine. Others, like the iPad use the same wifi connection and never fail. What can I do?

Running 10.6.8 on Intel dual core iMac, it keeps on losing internet connection. Webpages get stuck after a minute or so. If I check the internet connection via diagnostics it seems to work just fine. Others, like the iPad use the same wifi connection and never fail. What can I do?

Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M.

Hello... the airport (wifi) connection on my imac is oftenly "freeze" and need to reconnect again. Can everyone help to solve this problem? It's not happened to other computer on the same network in the same area (distance). Thanks a lot.

Hello... the airport (wifi) connection on my imac is oftenly "freeze" and need to reconnect again. Can everyone help to solve this problem? It's not happened to other computer on the same network in the same area (distance). Thanks a lot.

Hello,
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.5, 10.6, 10.7 & 10.8…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x/10.8.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
If using Wifi/Airport...
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
For 10.5/10.6/10.7/10.8, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
(There may be better or faster DNS numbers in your area, but these should be a good test).
Click OK.
If that doesn't work try changing channels on your Router.

Why yahoo/gmail retrieval and facebook app so so slow when in WIFI. But using the internet to check for emails and facebook is fast using the same WIFI connection??

Why yahoo/gmail retrieval and facebook app so so slow when in WIFI. But using the internet to check for emails and facebook is fast using the same WIFI connection??

Hi SandyS_VZW,
Yes tried resetting the wifi connection and problem still persist.
Here it is...to make it clear. Connected thru the same wifi at home...
-> emails (yahoo/gmail) and facebook WEBSITES are working fine and fast when using/accessing thru a browser (chrome/samsung browser) - no problem with this.
-> emails (yahoo/gmail) and facebook APP is soooooo sloooww (thru the App). Slow I mean comparing it to using their browser/websites... news feeds/emails refreshing so quickly but not when using the APP installed in Samsung Galaxy Note 4. Slow like - It will take around 5-10minutes just to get your emails and news feed refreshed.
THIS HAPPENS ONLY WHEN CONNECTED THRU A WIFI which has a speed of 10-20mb. It is not happening when connected to the network data/plan.
My wife has the same Samsung Galaxy Note 4 (coming from different provider at&t) - same setup (emails, fb app), same wifi connection, but she's not experiencing anything like it.
Not sure why, I dont want to believe that while connected to a WIFI, Verizon is restricting anything and ******* me off to make me switch to my data plan connection everytime - which is Unfair!
Was there a known issue similar about this case?
thanks,

SFE2000 routing 2 networks to the same Internet connection

Similar Messages

Maybe you are looking for