SFP-10G-SR vs SFP-10G-LR

What's the difference between SFP-10G-SR and SFP-10G-LR ?
SFP-10G-SR 10GBASE-SR SFP Module
SFP-10G-LR 10GBASE-LR SFP Module
Cisco 2960 Switch
Cisco 3750 Switch
Cisco 3850 Switch
Solved!
Go to Solution.

Does S5700-52X-PWR-LI-AC support stack?
Huawei S5700-52X-PWR-LI-AC is stacking through service ports and need to purchase the stack cable, it also support max stack 9 switches.
Cisco 2960 Switch
Cisco 3750 Switch
Cisco 3850 Switch

Similar Messages

What are the major differences between oracle 10g and oracle express 10g

Hi
Can anyone tell, What are the major differences between[b] oracle 10g and oracle express 10g.
Or if you know any URL, then please do let me know.
Advance Thanks
JC

Dear sir,
here it is.
http://www.oracle.com/database/product_editions.html

Oracle 10g R2 vs Oracle 10g;;;Plz Help Me

Hi all;
I'm preparing my first OCA exam ; Oracle Database 10g: Administration I. I 'm doing my preparation basically from 2 books ; Sybex Book OCA-Exam and All-in-One Exam Guide book.
Both books 're based on the first release of Oracle 10g.
My questions 're :
- What's the diffrence between Oracle 10g R2 vs Oracle 10g R1?
- What's New in Oracle 10g R2 (parameters, default parameters values, features...)?
thanks a lot,
Best REgards,
W
Edited by: OracleJavaLinux on Oct 30, 2008 8:01 AM

Well satish has given link for the difference in both the versions. I shall add to this that at this moment of writing,there is not anything which makes the exams depend on the release 2.The sybex books would be good enough but I shall recommend to attend Oracle Univ training for the same.
You can go ahead with the exam by preparing from these books, no issues would be there.
HTH
Aman....

Diffrence between 10g R1 RAC and 10g R2 RAC

Good day to all,
Any one here knows the diffrence between 10g R1 RAC and 10g R2 RAC in terms of Installation , Backup and recovery , Performance tunning and more ..............
Please this treat this information is urgent
Cheers
Syed

Please this treat this information is urgentOk, then what about the New features doc of 10gR2 reading urgently :
http://download.oracle.com/docs/cd/B19306_01/server.102/b14214/chapter1.htm#NEWFTCH1
Nicolas.

How to check similarity between two Databases 9i & 10g after imp in 10g

Dear all,
Source
=======
OS server     ==>     HP-UX
Oracle version     ==>     Oracle 9.2.0.8
DB Name          ==>     MSST
DB total users     ==>     320
Full export in     ==>     /u02/export/Jan09.dmp
Tablespaces     ==>     SC, SC_I, SA, SA_I, PP, PP_I, AC, AC_I, SD
Destination
============
OS server          ==>     HP-UX
DB Name               ==>     CHDB
Existg DB users          ==>     20
Oracle version          ==>     Oracle 10.2.0.4
copied 9i dump file in     ==>     /u03/export
Tablespaces created same as Oracle 9i i.e;
Tablespaces     ==>     SC, SC_I, SA, SA_I, PP, PP_I, AC, AC_I, SD
I had run full import on Destination server i.e; Oracle 10g & following is the command i used:
imp system/pwd@conn_string file=/u03/export/Jan09.dmp log=/u03/export/Jan09_imp.log full=y ignore=y statistics=none
*=== Imported successfully with few errors like ====*
IMP-00017: following statement failed with ORACLE error 2299:
"ALTER TABLE "EMP_PROMOTIONS_ORD" ADD CONSTRAINT "EMP_PROMOTIONS_ORD_UK" UN"
"IQUE ("EMP_NO", "RANK_NO_FOLLOW") USING INDEX PCTFREE 10 INITRANS 2 MAXTRAN"
"S 255 STORAGE(INITIAL 65536 FREELISTS 1 FREELIST GROUPS 1) TABLESPACE "PP" "
"LOGGING ENABLE "
IMP-00003: ORACLE error 2299 encountered
ORA-02299: cannot validate (PP.EMP_PROMOTIONS_ORD_UK) - duplicate keys found
ORA-02299: cannot validate (PP.EMP_PROMOTIONS_ORD_UK) - duplicate keys found
. . importing table "EMP_PROMOTION_DETAILS" 13333 rows imported
. . importing table "EMP_PROMOTION_MAST" 725 rows imported
. . importing table "EMP_PUNISHMENT" 271 rows imported
. . importing table "EMP_REPORT_BOOKS" 60528 rows imported
. . importing table "EMP_SALARY_HISTORIES" 120871 rows imported
. . importing table "EMP_SALARY_HISTORIES_TEMP" 77044 rows imported
. . importing table "EMP_TRANSACTIONS" 96536 rows imported
IMP-00017: following statement failed with ORACLE error 2299:
"ALTER TABLE "EMP_TRANSACTIONS" ADD CONSTRAINT "TRANS_UK" UNIQUE ("EMP_NO","
" "DIR_NO", "DIR_DATE", "TRN_CODE") USING INDEX PCTFREE 10 INITRANS 2 MAXTRA"
"NS 255 STORAGE(INITIAL 65536 FREELISTS 1 FREELIST GROUPS 1) TABLESPACE "PP_"
"I" NOLOGGING ENABLE "
IMP-00003: ORACLE error 2299 encountered
ORA-02299: cannot validate (PP.TRANS_UK) - duplicate keys found
Now my question is
===================
How to check everything is same/similar like Oracle 9i database ( source ), for example ( i used this technique ):
Can anyone tell me how to check similarity between two Databases 9i & 10g after import in 10g.
MSST_DB>SHOW USER
MSST_DB>SA
MSST_DB>select object_type, count(*) from user_objects group by objects;
OBJECT_TYPE     COUNT(*)
DATABASE LINK     2
FUNCTION     23
INDEX          1795
LOB          6
PACKAGE          8
PACKAGE BODY     8
PROCEDURE     30
SEQUENCE     67
SYNONYM          60
TABLE          644
TRIGGER          3
VIEW          20
CHDB_DB>SHOW USER
CHDB_DB>SA
CHDB_DB>select object_type, count(*) from user_objects group by objects;
OBJECT_TYPE     COUNT(*)
INDEX          1794
PROCEDURE     30
TABLE          644
TRIGGER          3
VIEW          20
FUNCTION     23
SYNONYM          60
PACKAGE BODY     8
SEQUENCE     67
PACKAGE          8
LOB          6
Edited by: VIKHARAHMED on Jan 10, 2012 3:02 AM

[url http://download.oracle.com/docs/cd/B19306_01/server.102/b14215/dp_export.htm#sthref67]Guide.

Deployment of Oracle 10g Application on oracle 10g application server

Sir,
I am new in this forum. Please guide me how to deploy oracle 10g application on oracle 10g application server.

Dear Ghulam,
1)Create A new OC4j instance on Oracle 10g Application Server
2)Deploy ur war or ear file accordingly on this OC4J.
3)Create the datasource ie connection of application with the database
4)Tune your Java Parameters inside the OC4J for better performance.
The details of this is explained on the above post ie two link.
Regards
Fabian

X2-10G-LX4 and SFP-10G-SR

Hi
Issue 1
I have a 6506-E with WS-X6708-10Gig Modules and i have installed X2-10G-LX4 transceiver on them, on the other side i have a UCS 6120 and installed a SFP-10G-SR.
The link between the 2 does not come up, what could be the reason for that? The distance between the 2 is 10 meters and i have already tried changing the cables.
Issue 2
If i connect the WS-X6708-10Gid module with X2-10GB-LR module and connect it to X2-10GB-LR on another 6506-E, the link comes up. that means there is no problem with the Module or the ios on the switch.
but if connect X2-10GB-LX4 on 6506-E and X2-10GB-LX4 on the other side, the link does not come up. Any clue what could be the reason ? I have already tried changing the transceiver.
Can someone please help ?

issue 2
If i connect the WS-X6708-10Gid module with X2-10GB-LR module and connect it to X2-10GB-LR on another 6506-E, the link comes up. that means there is no problem with the Module or the ios on the switch.
but if connect X2-10GB-LX4 on 6506-E and X2-10GB-LX4 on the other side, the link does not come up. Any clue what could be the reason ? I have already tried changing the transceiver.
You have got answer for first issue that LX4 cannot work with SR. By the way what kind of fiber you have Single Mode/Multimode?
second issue,
If your X2-10GB-LRmodule have worked then i can assume that you have single mode fiber for testing as LR is only for Single mode fiber .
LX4 is only made for Multimode fiber and it is not going to work on single mode fiber no matter what you try (as you are saying link is not comming up).
Cisco X2-10GB-LRM is the only module which can work for Single mode and Multimode (ofcourse you need Mode conditioning patchchord )

SFP-10G-LR and SFP-10G-LRM Compatibility

Hello,
Has anyone had success/experience running across OS2 SM with a SFP-10G-LR at one end and a SFP-10G-LRM at the other, where the total link length is <300m?
Thanks,
Andrew

Dear Dima L,
I will check this tomorrow... but expect the same error.
Regards,
Manuel

SFP-10G-SR= vs SFP-10G-SR-S= ??

Does anyone know what the technical difference is between these two SFP+ modules? Their function seems to be identical.
The only difference that I can easily find, is that the SFP-10G-SR= costs about $220 more than the SFP-10-SR-S= module:
http://www.cdw.com/shop/products/Cisco-SFP-transceiver-module-10-Gbps/1651560.aspx
http://www.cdwg.com/shop/products/Cisco-SFP-transceiver-module-10-Gbps/3671906.aspx

Brief explanations show that they are exactly the same, but can't find the S version in the data sheet but that does not mean it does not work. I personally buy a SFP-10G-SR= as I have used them many times and I know they will work.
http://www.cisco.com/c/en/us/products/collateral/interfaces-modules/transceiver-modules/data_sheet_c78-455693.html
http://www.cisco.com/c/en/us/td/docs/interfaces_modules/transceiver_modules/compatibility/matrix/10GE_Tx_Matrix.html
HTH

Deinstalling 10g 1 and installing 10g 2

Windows 2000 SP4
I deinstalled 10g version 1 and installed 10g 2, but I did not see the database I had created using version 1. I uninstalled 10g 2 and reinstalled 10g 1 but no dice.
The database files, control files, directories and data all seem to be there. I tried the utilities to upgrade but they do not "see" the database. The services for the instance are not there anymore.
How do I get my instance and database back?
Message was edited by:
robmera

Try using ORADIM utility. See http://download-west.oracle.com/docs/cd/B14117_01/win.101/b10113/create.htm#sthref284

Reports 10g calling from forms 10g

try reports 10g calling from forms 10g ,but I not do.
Programme have frm-41213 unable repserver.. error and I am not start up oracle reports server from services. please help me.

Dear Lida;
i use this code
rwserver -install repsername
but in release 3 it is not work and i had to write it like this
rwserver server=repservname
the first code make the report server work as service could u tell me how the first code work with realease 2 but in realeas 3 not working ?
and thkx alot in advance
regards
Reda El Mitwally

Apps 10g singale node to 10g RAC upgrade

Hi Friends,
I am planing to upgrade my Apps 10g singale node to 10g RAC. If you have any good document for this please share with me.

Pl identify exact OS, database and EBS versions. Pl see these MOS Docs
Using Oracle 10g Release 2 Real Application Clusters and Automatic Storage Management with Oracle E-Business Suite Release 12 [ID 388577.1]
Step by Step Guide to configure Oracle Applications Release 11i with 10g R2 RAC and ASM [ID 731278.1]
Configuring Oracle Applications Release 11i with 10g RAC and 10g ASM [ID 312731.1]
HTH
Srini

Dual sc/pc connector MMF for X2-10G-SR and XENPAK-10G-SR

the data sheet for both xenpak and x2 10G-SR specifies dual sc/pc connector MMF
we want to know if this is the same SC connector we use for GBIC converters.

Just for your information, a fiber link does not care if one end of the fiber has an GBIC (SC-type connector) and the other end has a SFP (LC-type of connector); or any other transceiver footprint (X2, CFP, etc.).. The thing that is important is that each module is the same specification, and matches the fiber type and link length of the network (10GBASE-SX in this example).
Good luck.

How to configure Oracle forms/reports 10g to Oracle Database 10g

Dear All,
I have downloaded oracle Developer Suite 10g for microsoft Windows (CD1/CD2) from edelivery.oracle.com.
I have also downloaded Oracle 10g xe edition from oracle.com.
Both above software are on the same machine.
Now, I have creaated new database, created few tablespaces,tables,indexes,functions etc on it. SID_NAME=xe.
I want to configure both the software(connect them) so that i can generate some reports, create forms and applications(on the same machine not on network).
How do i do that?
Best Regards,

did you set tns_admin? do you know what it's for?
don't edit tnsnames.ora manually if you can help it.
you have 2 tnsnames.ora. one is from the xe install. the other is from the developer suite install.
what does the one for your developer suite look like?
if you used the the network config assistant in a straightforward way, then it should end up with an entry similar to what you have in your tnsnames.ora from your xe installation.
the netconfig assistant has a TEST step in it. did you try that? you might need to change the username/password when you test it.
the main thing here is the tnsnames.ora. the way it will be located is in a particular order. it will check in this order, more or less
1. in current working directory
2. TNS_ADMIN defined by the session
3. TNS_ADMIN defined as a global environment (in control panel)
4. TNS_ADMIN defined in registry
5. default location (network\admin directory).
so if your developer says it can't resolve the name, then it means it is not defined in the tnsnames.ora it used. you need to determine which tnsnames.ora file it's using, and is it configured correctly.
if you did not set tns_admin, check your E:\DevSuiteHome_1\NETWORK\ADMIN\tnsnames.ora
this is the one developer will use by default.
it should have an entry similar to the one from your xe install e.g.
XE =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = oraclelaptop.yic.edu.sa)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = XE)
then when you run forms/reports, you should connect as user/password@xe

Integration problem between oracle forms 10g and oracle report 10g

Hi!
I've got any error message "Unable to connect to the report server "server name"" when a oracle report is run using run_report_object in the oracle form under oracle form developer 10g. Please advise any settings are required in order to run the report. Thank you very much.
Best Regards
Pinga

The report server is running as the report can be run via URL in the brower. However, it prompts out the error when it is called by oracle form using the run_report_object.

SFP-10G-SR vs SFP-10G-LR

Similar Messages

Maybe you are looking for