SFP modules check fake or not?

Dear Sirs!
My friend, buy few SFP GLC-T modules as original Cisco.
But I never see serial numbers like this:
00000MTC1719055H
00000MTC171903XL
00000MTC171907RX
00000MTC171909B6
N5596-S5# sh int ethernet 1/45 transceiver sprom
Ethernet1/45
    transceiver is present
    type is SFP-1000BASE-T
    name is CISCO-METHODE
    part number is SP7041_Rev_F
    revision is F
    serial number is 00000MTC1719055H
    nominal bitrate is 1300 MBit/sec
    Link length supported for copper is 100 m
    cisco id is --
    cisco extended id number is 4
Identifier                      : 0x03 (SFP)
Ext_Identifier                  : 0x04
Connector                       : 0x00 (Unknown)
Infiniband Compliance Code      : 0x00 (None)
Sonet Compliance Code           : 0x0000
Gigabit Ethernet Compliance Code: 0x08 (1000Base-T)
Encoding                        : 0x01 (8B/10B)
BR_Nominal                      : 0x0d [1300]
Reserved1                       : 0x00
Length_9u_1                     : 0x00 0 KM
Length_9u_2                     : 0x00 0 Meters
Length_50u                      : 0x00 0 Meters
Length_60u                      : 0x00 0 Meters
Length_Copper                   : 0x64 100 Meters
Reserved2                       : 0x00
Vendor Name                     : CISCO-METHODE
Reserved3                       : 0x01
Vendor OUI                      : 0x000000
Vendor Part No                  : SP7041_Rev_F
Vendor Revision                 : F
Reserved4                       : 0x410cc1
Check Code ID                   : 0x5a (OK)
Options                         : 0x0010
BR Max                          : 0x00
BR Min                          : 0x00
Vendor Serial No                : 00000MTC1719055H
Date Code                       : 13051801
Diagnostic Monitoring Type      : 0x00
enchancedOptions                : 0x00
SFF8472Compliance               : 0x00
Check Code EXT                  : 0x2b (OK)
Vendor Specific ID Data         : 0x00000e51bd4a5e876029cc2b092dba4d
                                  : 0x0ff1fd000000000000000000ebafbb73
What can I check this modules? this original Cisco or fake?
Dear Sirs who have Nexus 5xxx switch and inserted original GLC-T modules - please, send me "transceiver sprom" out
Thanks!
Helping seriously ill children, all together. All information about this, is posted on my blog

Hi, how can I check if it is Cisco Original, can I check my self ?
have this 4 items to check
FNS130301D3
FNS12200XVX
FNS12210CF2
FNS13230XLN

Similar Messages

SFP module not showing up as interface choice

I am trying to configure a 3825 router w/IOS 12.4(3d).
When I install a GLC-SX-MM module, I cannot see the module in the sh diag results and therefore not a choice in the list of interfaces.
When I view the logs, the insertion is logged.
Any assistance would be greatly appreciated,
Chris

Hi Chris,
There are two Gigabit Ethernet ports on Cisco 3800 Series systems. Port 1 is a fixed 10/100/1000BASE-T RJ-45. Port 0 can choose between 10/100/1000BASE-T RJ-45 and an SFP module slot. SFP modules are optional.
A new command-line interface (CLI) allows you to choose between the two media types. The "SFP" option will only come up if there is a SFP module plugged into the slot. RJ-45 is the default.
Please see the following configurations to get this port working:
Cisco3825#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Cisco3825(config)#interface gigabitEthernet 0/0
Cisco3825(config-if)#media-type ?
rj45 Use RJ45 connector
sfp Use SFP connector
Cisco3825(config-if)#media-type sfp
After this you should be able to use and see the SFP on the router. Hope this helps. :)
Regards,
Param

I want to buy iphone4 8GB, but I am afraid that I buy a fake iphone, not the real iphone. So, what can I do if I want to check for sure it is a real iphone from apple?

I want to buy iphone4 8GB, but I am afraid that I buy a fake iphone, not the real iphone. So, what can I do if I want to check for sure it is a real iphone from apple?

Buy it from an Apple Retail Store or Apple Online or through an approved Carrier.

C2960-S SFP Module not active

I have set up Cisco switches previously via the hyperterminal and been able to get them configured and operating, but I have limited knowledge of the tools and processes.
I have a 2960-S with 48 ports and 4 SFP modules.
I have good feedback on the 48 ports, but I can not get the SFP modules to ether be recognized or show any activity on the 2960-S. The unmanaged switch I have the fiber connected too, is indicating a network connection and activity, but the 2960-S is not indicating any connection on the SFP modules.
I have added the switch configuration file.

Ok. I see you posted your config above, and after reading a bit more here, you're dealing with layers 1-2 of the OSI model at the moment, so let's focus on that. For your unmanaged switch, are you using the same type of SFP? Sometimes you need to use the same on both sides for a link to come up. I have tried off branded + Cisco before and it had lots of problems. Also
If that is not the problem, I would say look over your running-configuration for port 49. It does not appear to have any configuration added to it so far. If every device on your unmanaged switch will be on the same vlan, you can turn port 49 into 'switchport mode access' and 'switchport access vlan 1' as well as 'spanning-tree portfast'.
If not all devices will be on vlan 1 on your unmanaged device, you can try 'switchport mode trunk'. This will allow vlans 1-4094 across by default (you can limit this too). Make sure that the unmanaged switch is set to trunk mode as well, and allowing the vlans you want across.
For troubleshooting, you can try 'show spanning-tree vlan <xxx>' where xxx is the vlan you are having trouble with. Lastly, you can also try to issue a 'show interface gig 1/0/49 counters detail', which will show you all the types of packets entering the port. This varies from ios version to ios version, but it will show unicast, multicast, broadcast, packets below the MTU or above (runts and giants).
I hope that helps : )

Looking for Cisco 6500 E series 1/10 G SFP Module

I am looking for 24 ports 1/10G SFP module for my 6509E chassis and WS-SUP720-3B sup module.
I have found the following from my research
WS-X6704-10GE - 4 port 10G module which supports only 10G not 1G
WS-X6708-10G-3C - 8 Port 10G module which supports only 10G not 1G
WS-X6724-SFP - 24 Port 1G SFP module which supports only 1G not 10G
Thanks for your help

Hi datamodule, i see that you are looking for a 24 ports 1/10G SFP module for the Catalyst 6509E. From what i am looking at it's either 1G or 10G. Please check this link for further assistance: http://cs.co/9000YTBE. Feel free to message me for further assistance.
Thanks,
Angela ([email protected])

Disabled GBIC SFP module

I have 2 WS-3750-48PS switches in a stack, i have today installed 2 x MGBSX1 sfp's to link new fibre to other building on the grounds.
I have now got 2 types of error messages showing :-
EVENT NOTIFICATION -
Description: Gi1/0/3: This port has been disabled because Non Compliant Gigabit Interface Converter (GBIC) connector detected.
Recommendation: Replace connector with cisco compliant Gigabit Interface Converter (GBIC) connector. Refer switch technical documentation to determine cisco compliant connector. Enable the port again.
SYSTEM MESSAGES
unfortunately i haven't got the full message but it was saying thet there was a CRC error in the EEPROM and that maybe a software update would rectify the problem.
The stack is running 12.2(35)SE5-IP-BASE software at the moment and i have seen on a Cisco page that ALL cwdm sfp's are compatible with my switches (http://www.cisco.com/en/US/products/hw/modules/ps4999/products_tech_note09186a00807a30d6.shtml#support3)
Should i upgrade the software to 12.2.55-SE3 ?

The reason for the Non Compliant error message is that the MGBSX1 sfp is not a "compatible" product with the WS-3750-48PS switch, per the following compatibility document:
http://www.cisco.com/en/US/docs/interfaces_modules/transceiver_modules/compatibility/matrix/OL_6981.html#wp137837
According to the document you referenced, the following statement may be the reason you are receiving CRC errors on the port.
"Use Third Party SFP Modules
The use of third party SFP transceivers with Cisco devices is not supported by Cisco. Cisco-approved SFP modules have a serial EEPROM that contains the module serial number, the vendor name and ID, a unique security code, and cyclic redundancy check (CRC). When an SFP module is inserted in the switch, the switch software reads the EEPROM to verify the serial number, vendor name and vendor ID, and recomputes the security code and CRC. If the serial number, the vendor name or vendor ID, the security code, or CRC is invalid, the software generates this security error message and places the interface in an error-disabled state."
Tom

Cisco 2960S-24TS-S using SFP modules between switches

I am using Cisco 2960S-24TS-S using SFP modules for two different speed requirements, I have two SFP ports using 100Mbit modules and the other two SFP ports using 1000Mbit modules.
I have two Cisco 2960S-24TS-S switches connected together via a fiber optic cable, and each SFP module is on port 28, with a 1000 Mbit SFP module in each, and the two switches will not connect. The fiber was checked with a light tester not a db kit.
Do I need to have SFP port specific setup details in a configuration file for the Cisco Switch or does the SFP module handle this?
" interface GigabitEthernet1/0/28" - set up in config file for the port. Does this need to dictate "interface 100" or "1000MbitEthernet1/0/28" instead?

The ports should auto-negotiate speed you should not need to hard code them to get them to come up , Are the ports showing up/down or down/down can you post the show interface for each side and the show run int x/x for each port

Unable to load the EJB module. DeploymentContext does not contain any EJB.

I'm writing an enterprise application to familiarize myself with Glassfish 3.1.2 and EJB 3.1. I've created several local, stateless beans, and injected one into a JSF managed bean. The ejb and web modules compile fine, but when I launch the application with Glassfish I get the following startup error and the application does not deploy. I don't understand what it means, can someone ellaborate?
SEVERE: Exception while invoking class org.glassfish.ejb.startup.EjbDeployer prepare method
SEVERE: Exception while invoking class org.glassfish.javaee.full.deployment.EarDeployer prepare method
SEVERE: Exception while preparing the app
SEVERE: Unable to load the EJB module. DeploymentContext does not contain any EJB. Check the archive to ensure correct packaging for D:\Documents\NetBeansProjects\Test\dist\gfdeploy\Test\Test-war_war.
If you use EJB component annotations to define the EJB, and an ejb or web deployment descriptor is also used, please make sure that the deployment descriptor references a Java EE 5 or higher version schema, and that the metadata-complete attribute is not set to true, so the component annotations can be processed as expected
org.glassfish.deployment.common.DeploymentException: Unable to load the EJB module. DeploymentContext does not contain any EJB. Check the archive to ensure correct packaging for D:\Documents\NetBeansProjects\Test\dist\gfdeploy\Test\Test-war_war.
If you use EJB component annotations to define the EJB, and an ejb or web deployment descriptor is also used, please make sure that the deployment descriptor references a Java EE 5 or higher version schema, and that the metadata-complete attribute is not set to true, so the component annotations can be processed as expected
     at org.glassfish.javaee.full.deployment.EarDeployer.prepare(EarDeployer.java:166)
     at com.sun.enterprise.v3.server.ApplicationLifecycle.prepareModule(ApplicationLifecycle.java:871)
     at com.sun.enterprise.v3.server.ApplicationLifecycle.deploy(ApplicationLifecycle.java:410)
     at com.sun.enterprise.v3.server.ApplicationLifecycle.deploy(ApplicationLifecycle.java:240)
     at org.glassfish.deployment.admin.DeployCommand.execute(DeployCommand.java:389)
     at com.sun.enterprise.v3.admin.CommandRunnerImpl$1.execute(CommandRunnerImpl.java:348)
     at com.sun.enterprise.v3.admin.CommandRunnerImpl.doCommand(CommandRunnerImpl.java:363)
     at com.sun.enterprise.v3.admin.CommandRunnerImpl.doCommand(CommandRunnerImpl.java:1085)
     at com.sun.enterprise.v3.admin.CommandRunnerImpl.access$1200(CommandRunnerImpl.java:95)
     at com.sun.enterprise.v3.admin.CommandRunnerImpl$ExecutionContext.execute(CommandRunnerImpl.java:1291)
     at com.sun.enterprise.v3.admin.CommandRunnerImpl$ExecutionContext.execute(CommandRunnerImpl.java:1259)
     at com.sun.enterprise.v3.admin.AdminAdapter.doCommand(AdminAdapter.java:461)
     at com.sun.enterprise.v3.admin.AdminAdapter.service(AdminAdapter.java:212)
     at com.sun.grizzly.tcp.http11.GrizzlyAdapter.service(GrizzlyAdapter.java:179)
     at com.sun.enterprise.v3.server.HK2Dispatcher.dispath(HK2Dispatcher.java:117)
     at com.sun.enterprise.v3.services.impl.ContainerMapper$Hk2DispatcherCallable.call(ContainerMapper.java:354)
     at com.sun.enterprise.v3.services.impl.ContainerMapper.service(ContainerMapper.java:195)
     at com.sun.grizzly.http.ProcessorTask.invokeAdapter(ProcessorTask.java:860)
     at com.sun.grizzly.http.ProcessorTask.doProcess(ProcessorTask.java:757)
     at com.sun.grizzly.http.ProcessorTask.process(ProcessorTask.java:1056)
     at com.sun.grizzly.http.DefaultProtocolFilter.execute(DefaultProtocolFilter.java:229)
     at com.sun.grizzly.DefaultProtocolChain.executeProtocolFilter(DefaultProtocolChain.java:137)
     at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:104)
     at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:90)
     at com.sun.grizzly.http.HttpProtocolChain.execute(HttpProtocolChain.java:79)
     at com.sun.grizzly.ProtocolChainContextTask.doCall(ProtocolChainContextTask.java:54)
     at com.sun.grizzly.SelectionKeyContextTask.call(SelectionKeyContextTask.java:59)
     at com.sun.grizzly.ContextTask.run(ContextTask.java:71)
     at com.sun.grizzly.util.AbstractThreadPool$Worker.doWork(AbstractThreadPool.java:532)
     at com.sun.grizzly.util.AbstractThreadPool$Worker.run(AbstractThreadPool.java:513)
     at java.lang.Thread.run(Thread.java:722)

My guess is that you deployed an ejb without bean in it. when you have an ejb module, be sure you have at least one bean present.
Are you sure you have implementend some beans? Or did you do this only in the web module?
Try adding an @Stateless bean doing nothing in you ejb module, redeploy and let me know if that works

Adobe Flash FAIL: Adobe Flash Player local storage settings incorrect. Module 'Resume' feature may not work on this computer.

Using a Windows 2012 RDS Environment, we have users connecting to a CPD website, and as part of the CPD they need to run a systems checker. When they run the systems checker they get the following error message: "Adobe Flash FAIL: Adobe Flash Player local storage settings incorrect. Module 'Resume' feature may not work on this computer". All users are connecting to this environment with Windows CE Clients,I have checked the setting on Adobe Flash and they seem correct but as each user has its own profile on the RDS session, is there something that I should be setting for each user. I have added the website to the trusted sites and it has made no difference. Any ideas

It sounds like what's happening is that Flash Player can't write or read from the local shared objects in the user's redirected home directory because we disallow traversing junctions in the broker process. This behavior was disabled to address a vulnerability identified in some of John Forshaw's research into the IE broker last year.
You can enable this behavior by adding the following setting to mms.cfg:
EnableInsecureJunctionBehavior=1
That said, you can probably gather from the name of the flag that we don't really recommend this approach, and disable this attack surface by default. There's some risk that a network attacker could craft content that abuses fundamental issues with how Windows handles Junctions to write to arbitrary locations.
Unfortunately, there's not a simple or easy workaround that I'm aware of (but it's been ages since I've administered a Windows domain) for this kind of NAS/SAN-backed terminal server environment where Flash is not able to access \Users\<user>\AppData\Roaming\Macromedia\Flash Player\ without traversing a junction.

Error initializing ejb-module; Exception javac.exe not found under

Dear all,
I got followings error after i had tried to doing some lab.I had checked the folder "C:\Program Files\Oracle\jre\1.3.1" exists but missed but missing javac.exe. Could anyone can advice me what is going wrong?
04/04/14 16:44:20 Auto-deploying - web/WEB-INF/classes (No previous deployment found)...
04/04/14 16:44:20 Error instantiating application 'lab04' at file:/C:/share/oc4j
/labs/lab04/: Error initializing ejb-module; Exception javac.exe not found under
C:\Program Files\Oracle\jre\1.3.1, please use a valid jdk or specify the locati
on of your java compiler in server.xml using the <java-compiler .../> tag
Thanks in advance!
Best Regards,
Chris CHIU

Dear Chris,
The answer lies in the error message you got, namely:
please use a valid jdkAccording to your post, you don't have a JDK, you only have a JRE. The javac compiler is part of the JDK, it is not part of the JRE.
You can download the JDK from the J2SE Download Web page. Look for the Download J2SE SDK link -- do not choose the Download J2SE JRE link!
Good Luck,
Avi.

Required application module reporting.HRRunDlg is not configured. Please co

Hi,
I did the 9.3.1 REPORTING ANANLYSIS installation and then applied 9.3.3 patches,
when i am trying to use reports in workspace it is throwing the below error:
Required application module reporting.HRRunDlg is not configured. Please contact your administrator.
I tried restaring and rebooting ,killing java.exe services, still it givng the error, it is bit urgent,
Can some one please respond on this?
Thanks,
msr.

That usually means either FR is not running or the Web Server is having trouble connecting.
Do either of these links work:
Direct
http://frserver:8200/hr/modules/com/hyperion/reporting/web/common/HRCore.js
Through web server:
http://websvr:19000/hr/modules/com/hyperion/reporting/web/common/HRCore.js
If neither work - then check the FR logs
If 8200 works and not 19000 you might try reconfiguring your web server using the config utility. And check the web server configuration.
Nick

Error "Invalid or Could not find module configuration" and "Required application module HyperionPlanning.planning is not configured

Dear
I use version 11.2.1, try to open an application one by planning and workspace is the error below.
"Invalid or Could not find module configuration" and "Required application module HyperionPlanning.planning is not configured"
I checked the oracle site, but the suggested solution is not possible because using the OHS and found the file HYSLWorkers.properties.
Solution
On the server que hosts the Apache component:
1. Navigate to HYPERION_HOME%% \ common \ httpServers \ Apache \ 2.0.59 \ conf
2. Edit the file named HYSLWorkers.properties,
3. Locate the entry starting with "worker.HP__8300.port"
4. Set its value to the value of the Planning web application's listening port incremented by two,
5. Save and close
6. Restart Apache only
Anyone have any suggestions?

If restarting the services does not help, run the EPM configurator again and configure foundation web server again then restart services and try logging into workspace
Cheers
John
http://john-goodwin.blogspot.com/

If your Lightroom 6 is crashing in the Slideshow module, check the SAMPLE RATE of your music track

After spending over 2 hours with an Adobe technician who had control over my Windows 7 machine, I've learned something that I don't think Adobe knows yet... I upgraded from LR 5.7 to LR 6 (not CC) and began having issues when I was working in the Slideshow module. When trying to add a music track, Lightroom would crash ("unexpectedly quit"). I couldn't for the life of me figure out why. I turned off the GPU since a fair amount of chatter on the forum related to that, but it didn't change anything.
So I finally waited patiently for the Adobe Chat line to finally get a tech to respond...and he was exceptionally detailed and methodical in his approach to diagnosing my issues. I could follow on my screen as he did a variety of things that indicated he understood what he was doing. Unfortunately he got to a point where he thought (as did I) that he had found the problem/solution...which he thought was related to the bit rate. He concluded that music with a Variable Bit Rate (VBR) as opposed to a Constant Bit Rate (CBR) was causing the problem. Also unfortunate was that this "discovery" was near the 2-1/2 hour mark and we did not apply the scientific method to property determine if we had narrowed down to cause/effect.
Based on my further analysis, he was close, but not right on. It isn't the BIT rate mode that is causing the crash, but rather the SAMPLE rate. Turns out that the vast majority of songs in my iTunes library have a sample rate of 44.100 kHz--and those work just fine. However, I have about 15 songs, mostly downloaded as free background music from the YouTube creation library, that have a sample rate of 48.000 kHz--every single one of those cause my LR6 to crash.
If you're having a problem with Lightroom crashing in the Slideshow module, check the SAMPLE RATE of your music track.

If you're on Windows, check out a free program called Audacity--it's fantastic. With Audacity the process of converting a 48.000 kHz to 44.100 kHz is as simply as opening, changing the sample rate, and then exporting again, as an MP3.

Cisco 3750 Switch SFP Module

Hi all,
I have one 3750 switch( ME-C3750-24TE )with IOS 12.2(25)EY4,
Now I have two SFp Module GLC-SX-MM and i have inserted in four ports of Switch
But nowhere I found it detected via "Sh inventory"
Moreover I have also tried with loop cable (LCPC-FCPC-ATTENTUATOR-FCPC-LCPC)bUT NOT GETTING lED ON ANY PORT
Pl. Guide
I am attaching sh-tech for reference

Hi,
when inserted the SFP module in one port take a look at the output of "show interface gigabitethernetX/Y" watch for a line (I think it is line 5) including the word "media", there should be a short description of the SFP. Also look at the first line of "show interface gigabitethernetX/Y" it could be that the SFP doesn't work in the switch (maybe because it is a none cisco one) then there would be something like "err-disabled". And if you have logging enabled on the switch (e.g. logging buffered 8192 debugging) then there should be an error message also.
The command "show idprom interface gigabitethernetX/Y" shows information about the SFP module in slotX/Y.
Depending on the "err-disable" configuration of the switch ("show err-disable detect" and "show err-disable recovery") a looped interface maybe put in an 'err-disabled' state, see "show interface ..." or "show logging"
HTH
regards
Mark

Cisco 3925 and SFP modules

I'm trying to install a MGBSX1 into the Cisco 3925 but it's doesn't seem it's detecting it for some reason.
I've changed media type and I've tested with another SFP module (GLC-SX-MM) which works fine.
Am I missing a command to enable this type of module on the Cisco 3925?
Thanks

Hi,
Looking at the SFP compatability table for 39XX series routers.
http://www.cisco.com/c/en/us/products/routers/3900-series-integrated-services-routers-isr/relevant-interfaces-and-modules.html#formfactor
The MGBSX1 is NOT mentioned
Looks like the MGBSX1 is only compatable with the Small Business switch family.
http://www.cisco.com/c/dam/en/us/td/docs/interfaces_modules/csbna/mgb/quick_start/guide/Optical_Module_QSG_en-US.pdf
Regards
Alex

SFP modules check fake or not?

Similar Messages

Maybe you are looking for