SFR drops traffic when policy is out-of-date?

Hi,
We are evaluating a 5515X with FireSIGHT.
I am routing a few guest networks through the lab ASA but are experiencing some strangeness :)
Three times it has suddenly started dropping traffic, and I really can't pinpoint the reason..
The things that I have noticed when I get the warning from our support staff, is that there are policies out-of-date on the ASA. (See att. img policy_out-of-date.png). And the when I apply the policies the traffic starts again..
And when I look at the logs from the ASA the thing thats sticks out is the sudden spike of SYN Timeouts (See att. img syn_timouts.png).
I have "Inspect traffic during policy apply = Yes", and I have read that this could stop the traffic "when applying" the policy. But should that really block traffic when the policy is out-of-date?
Do you guys have any idea whats happening here, or noticed anything like this before?
Is there a log that shows why the policy gets out-of-date?
Regards Falk

As far as getting the package in the repo updated as mentioned above it all depends on the maintainer for that particular package. What you can do to help is go to the homepage, search for the package and flag it as out of date. FYI this has already been done for mythtv.
To upgrade on your own the best way to do it is start from the same PKGBUILD that is used to build the official package through abs. You can find all the info you need on the wiki page.
Typically the PKGBUILDs in the AUR have some different functionality from the main version in the repo, and aren't usually what you are looking for if all you want is a version bump.
It is usually best to remove your installed version before using a version from AUR. Most AUR PKGBUILDs will have conflicts (and provides) for other versions of the same package and thus pacman will give an error when trying to install it. If you are just bumping the version of the same package you will not need to remove it first.
EDIT: You can use pacman -Rd to remove (and replace) a package if others depend on it.
Last edited by quigybo (2010-06-18 04:51:24)

Similar Messages

Query Governor - Summary Data - Only when not out of date?

In Oracle Discoverer Desktop edition the user can choose how Summary Data are used:
1. Always, when available
2. Only when summary data are not out of date (stale)
3. Never
What exactly is the meaning of "Only when summary data are not out of date"?
In previous versions of Discoverer you had the opportunity to specify how old (in days) summary tables were acceptable to you.
(By the way: In the Danish translation of Discoverer the word "not" has been omitted, so you have the opportunity to use summary data only when they are out of date :-)
Best regards
Torben

Actually it doesn't matter if you have Applecare or not because Apple simply isn't recognizing this as an issue even though multitudes of people have experienced it. If they don't see it as a problem, then they obviously don't have a solution, and so taking your laptop in through apple care is totally useless.
I've talked to 3 customer support representatives over the phone and they all said they were 'unaware of the issue' and would not even attempt to help. It's very disappointing.

Dropped frames when playing section in the timeline w/audio, Viewer plays fine. Plays for 1 sec, no sound, nothing on audio meters. Problem out the blue, made no conscious changes. FCP 7.0.3. iMac, 2.7 GHz Intel Core i5. OS10.8.4. Thanx.

New to FCP. Dropped frames when playing section in the timeline w/audio, Viewer plays fine tho. Plays for bout 1 sec with no sound, nothing showing coming through the audio meters. Problem came out the blue, made no conscious changes to settings. FCP 7.0.3. iMac, 2.7 GHz Intel Core i5. OS10.8.4. If any other info needed please let me know, will be happy to provide it. Thanx.

Thank you for the help. Below is my Source footage and sequence settings.
The other footage I have on the timeline is an mp3 file made in Garage Band and some footage I sent to Motion to edit. I do have some offline media on there since I switched computers but FCP had been working fine for a few months with it on there. I have not tried trashing my FCP Preferences. If I did would I have to back up my project?

My tool bar won't drop down when I'm online and I can't click out of tabs

When I'm online, my tool bar won't drop down when I move my mouse to the top of the screen. I have to keep pushing the ESC key until the screen finally minimizes. Also, I no longer have the little x in the left corner of my tabs, I have to right click the tabs in order to exit out of them. It's really frustrating and this just all of a sudden started yesterday. Any advice as to how I can fix this?
Thanks!

No - there is no x in an active tab, either - that's my problem! It's nuts.
I can't exit a full screen using option+command+f. ESC was my final straw. Thanks anyway.
I guess I should emphasize that I'm not new to Apple, so I know how my computer works. But I am new to this particular problem, and like I said before, this just started all of a sudden.
I'm getting frustrated because getting on and off the internet is becoming more and more difficult.

N7000 : details of packets dropped by COPP policy (class-default) ?

Hi,
On one of our N7K, we have some packets dropped by the COPP policy in the class-default class-map. :
Partial results of "show policy-map interface control-plane" not so long after clearing the counters :
class-map class-default (match-any)
      set cos 0
      police cir 100 kbps , bc 250 ms
      module 1 :
        conformed 12210790 bytes; action: transmit
        violated 201870 bytes; action: drop
      module 2 :
        conformed 8399646 bytes; action: transmit
        violated 0 bytes; action: drop
      module 3 :
        conformed 34518233 bytes; action: transmit
        violated 6186895 bytes; action: drop
What would be the best way to figure out what traffic is dropped by the policy ? Is there any logging possible ?
Thanks,
Laurent

There is still no logging possible.
What can be done is piping the class-default-traffic to some port and then analyze it with wireshark or some similar tool. But as far as I know, this still cannot be done by default - at least with NX-OS 4.2(4) we had to reprogram the module with assistance from TAC. I suggest you contact your support partner in this matter.

I have copied my CDs into iTunes (currently running v11) to play on my iPod. I have now bought a non Apple mp3 player to use when I am out running. How can I copy the many tracks I want from iTunes onto the new player?

I have copied my CDs into iTunes (currently running v11) to play on my iPod. I have now bought a non Apple mp3 player to use when I am out running. How can I copy the many tracks I want from iTunes onto the new player?
Thanks

I tried Notpod but can't get it to work. Part of the problem, I suspect, is that I can't create a folder on my player (a SanDisk Clip+). I also can't do this in Windows Explorer. Whilst I can see the Clip+ in Explorer, the option to create a new folder isn't there.
The error mesag I get in Notpod is:
"Unhandled exception has occurred in your application. If you click Continue, the application will ignore this error and attempt to continue. If you click Quit the application will close immediately.
InvalidArgument=Value of '0' is not valid for 'SelctedIndex'. Parameter name: SelectedIndex"
Then, when I plug the Clip+ into a USB port, iTunes thinks it is my iPad - which is because, I guess, Notpod hasn't worked.
I can drag and drop files from the Music folder where my iTunes tracks are stored onto the Clip+ and they get converted but I'd rather synchronise a Playlist from iTunes if I can.
Thanks anyone who can help

My iphone 4S only start whit cable plug in and then show battery very low (with red line end) then try to turn on but show searching in operator name command and not connecting and no work properly and when I plug out it turn off!!! what should I do?

My iphone 4S only start whit cable plug in and then show battery very low (with red line end) then try to turn on but show searching in operator name command and not connecting and no work properly and when I plug out it turn off!!! what should I do?

I'm afraid you'll have to get the phone serviced, dropping the phone must have damaged additional parts inside the phone.
But Apple will not service the phone anymore, opening the phone and replacing the battery should only be done by authorized personal, not by users.
You'll have to look for a 3rd party repair shop and see if they can fix this, sorry.

I needed to install a previously purchased CS6 versus on new computer. To do this, I had to download a version from CC. I will not be using CC. How do I activate Photoshop under my license so that it does not stop working when I am out of communication ra

I needed to install a previously purchased CS6 versus on new computer. To do this, I had to download a version from CC. I will not be using CC. How do I activate Photoshop under my license so that it does not stop working when I am out of communication range a month from now?

The CC version will not activate with your perpetual CS6 license. Download the version from here:
http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html
Your number should work with this version.

Acrobat Reader is not properly displaying dynamic drop down when LiveCycle does

I have a sample file that loads a drop down menu from an xml file. This form works fine in the preview pane of LiveCycle. I see the values properly populated. When I attempt to load the same file with Acrobat Reader the drop down menu shows up empty. I have saved the document as a Dynamic PDF. This happens with both Reader 8.0 and 7.0 on two different machines. Am I doing something wrong? Is this a known issue?

How are you merging the data to the form before viewing in Reader? Using the Preview in Designer allows you to pass xml data when rendering the PDF but when you save out a PDF Form from Designer the data is not part of the form. And without Reader extending the form (or using Acrobat Pro) you have no way of pulling in the xml data so that the drop down can populate.

Can I force Quicktime to remain in fullscreen when it's out of focus

Hey,
I've got a bit of a question. I recently got hold of a new LCD and hooked it up as my secondary display, and among other things, I like to keep work on one screen and video on the other. Trouble is, any time Quicktime loses focus, it drops back to windowed mode. Is there any way to lock it in fullscreen mode when it's out of focus and I'm typing and/or clicking around on the other display? Alternatively, can it be done with VLC? And one last thing just in case someone knows, can you lock a Hulu player in fullscreen?
Thanks in advance if you read this, I appreciate your time.

A few suggestions:
QT Full Screen Mode Widget.
QT Full Screen
Full screen QuickTime Player
10.4: Watch fullscreen QuickTime movies via Automator

Post Moved Galaxy-Note-dropping-Wifi-when-using-...

Pot moved http://community.bt.com/t5/Other-BB-Queries/Galaxy-Note-dropping-Wifi-when-using-HH3/td-p/671308
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

I think I found the answer to my own question (no thanks to Verizon)!
I found this article online which was written recently (2012) and explains the WIFI - Bluetooth interference pretty well. Here is the link:
http://www.ecnmag.com/articles/2012/03/wi-fi-and-bluetooth-coexistence
The way it has been explained is that if the WIFI & BT radios are on the same chip and using the same antena to send and receive, they WILL interfere no matter what. Having them on two different chips is the best way. But Frequency Isolation (Adaptive Frequency Hopping (AFH)) is a way to reduce interference when they are both on the same chip (as it is in Galaxy Note 2 & S3 - they have Broadcom BCM4330 for wifi/bluethooth/FM) which I guess needs to be addressed in a software update (or may be it already has and is not working well). The last solution is to use 5GHz band for WIFI.
There you have it. But please let me know what you think and if you have found out anything else.
Thanks

Want to upgrade to third version when it is out but, I have lost reciept with which I bought the iPad 2 from best buy. I live in Nigeria , how do I go about it?

I want to upgrade to iPad 3 when it is out but I have lost my reciept with which I purchase it from best buy stores in the US. Although, someone bought it for me and I was given the reciept but , in the process of packing to another house, I lost it. Am now asking, how do I go about this ie upgrading when the ipad3 hit the market stand?

You don't need your receipt, there is not upgrade policy at Apple. Just buy the new one when it comes out and sell the one you have now. If you are referring to trading it in at Best Buy you would need to contact them.

Wireless Bridge dropping traffic

Hi,
We have 2 x AIR-BR1310 setup with a point to point bridge between 2 offices, see below.
Office2---Bridge2------Bridge1---Office1
At random periods of the day the link drops and office1 is unable to contact office2. Upon further inspection the Bridges report that the wireless association is still active and this is confirmed as Bridge1 can still ping the BVI interface on Bridge2.
I telneted to the console on Bridge2 and attempted to ping hosts in Office2, all ping attempts failed. The BVI and Fastethernet interfaces on Bridge2 are both up and there are no errors on the interfaces.
To resolve the issue we have to perform a hard reboot on Bridge2, as soon as the bridge comes back up traffic passes as normal. We have tried rebooting the switches and Bridge1 but the network still drops traffic, its only when Bridge2 is rebooted that operation returns to normal.
Any ideas?

If the bridge link stays up, and you can get to the BVI interface, then this isn't a wireless problem. The problem should be on the other side of the radio interface.
What do you have installed on the other side? Does the bridge connect directly to a switch? Can Bridge 2 ping its default-gateway?

I wanted to know why they call me when I do not show the number but I get the words private number, and even when I call out to another private number.

I wanted to know why they call me when I do not show the number but I get the words private number, and even when I call out to another private number.I tried it in the settings to activate id shows but nothing has changed. I hope you can help me.

Cloud programs do not use serial numbers... you log in to your paid Cloud account to download & install & activate... you MAY need to log out of the Cloud and restart your computer and log back in to the Cloud for things to work
Some general information for a Cloud subscription
Log out of your Cloud account... Restart your computer... Log in to your paid Cloud account
-Sign in help http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html
-http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html
-http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
-http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html
Does your Cloud subscription properly show on your account page?
If you have more than one email, are you sure you are using the correct Adobe ID?
https://www.adobe.com/account.html for subscriptions on your Adobe page

Clips move around when I edit out a section

I am sure many of you know what I am trying to ask, it's just difficult for me to describe. When I edit out a section of one clip, all of the clips move over to fill in that space, that's not what I want to happen..I want everything to stay where it is and there to be a blank space where I just edited. I can get an animated part synced up perfect, decide to change one thing and the whole thing is messed up!
What am I missing here? Help?
Thanks in advance...
peace, pride & respect,
Chris

You aren't missing anything. That's just the way it works. Basically, you can't guarantee your audio sync until all of your video editing is done. You can try locking the various audio clips to the video clips at the playhead, using the Advanced menu. That might preserve the sync in most of your movie, depending at what point you removed the edited material. At least you probably could confine the "mess up" to one section of audio. But you still will need to account for the material you edited out, unless you want to leave a blank space there or edit your audio.
If you do want a blank space at your edit point, just create a space by dragging back the clips that moved over, until its back in sync with the audio. You can make note of how much duration you edited out, so that the created space is of the same duration. Then get out of the timeline and go to the movie clips display. You will see your space displayed as a black clip. Control click on it, and in the resulting drop down menu, select Convert Empty Space to clip, if that's what you want. Of course, that will leave a black space in your movie.

SFR drops traffic when policy is out-of-date?

Similar Messages

Maybe you are looking for