SFSY-FORMPAGES showing incorrect number of pages

Hello,
I have created a check form, and use SFSY-FORMPAGES to display the page numbers on the check and separate remittance if necessary.  If I print a single check that has no separate pages for remittance, it is telling me that there are 2 pages in the form, when there is only one.  What can I do to fix?

Hi Daniel,
As you said that,you have used SFSY-FORMPAGES to display the page numbers on the check and separate remittance so for that reason its printing two pages i.e one for the check and another for the remittance.
Create the program lines for the remittance..incase if the remittance is there print the check and remittance else print only the check.
Regards,
Sravanthi

Similar Messages

  • SFSY-FORMPAGES showing as * when it exceeds 9

    Hi All,
    I have a field in my smartform which shows the total no. of pages generated.
    I have put SFSY-FORMPAGES for this purpose. It displays correctly till the no. of pages are 9.
    When the total no. of pages become 10, its showing me *
    The space for this field is 7cm so I think the space should not be a problem.
    Please let me know how I can resolve this.

    Hello,
    You can use &SFSY-FORMPAGES(3ZC)& instead of &SFSY-FORMPAGES&,
    as described in the SAP note: 588352.
    Regards,
    David

  • How to show the number of page in my document without inserting page number?

    I have no idea how to make Pages show the number of the page in my document I'm editing.

    In the Pages > View > Show Thumbnails. Each numbered thumbnail is a page in your document. The thumbnail has a blue background when you are on that page.

  • Camera Roll showing incorrect number of photos

    The Camera Roll doesn't seem to be functioning correctly.
    When I import photos into iPhoto, i select the option to delete them from the phone.
    The photos disappear, but the number of photos apparently in the Camera Roll isn't reset to zero.
    Anybody else have this problem?

    ShadyMac wrote:
    Can you please post the process steps you're using to move or change your synced photos...
    Typically, I would connect my iPhone to my mac, I would manually sync (automatic sync is disabled), I would then remember that I have taken photos, run iPhoto '09 and import the pictures, selecting to delete them when the import process is complete.
    I have smart folders in iPhoto that include all iPhone pictures, so I would sync again to the the photos back on my phone.
    Also...when you tell iPhoto to delete and then the camera roll still shows a number...are there pictures there or does it have no pics but still has a number???
    After iPhoto has deleted the photos, the camera roll has the same number and the Camera Roll folder is empty.
    Message was edited by: alexish

  • Application Startup by Product report shows incorrect number

    Hello all,
    I don't quite understand how ZAM actually generates the information for Startup Count of say Microsoft Word 2013 Or Adobe Photoshop CC ...

    Scott, I guess the best way is to provide an example:
    say definition of table, with column definitions is as follows:
    create table example (
    id number,
    last_name varchar2(20),
    first_name varchar2(10),
    home_state varchar2(20)
    Populate the table as follows:
    ID LAST_NAME FIRST_NAME HOME_STATE
    1 Smith John Indiana
    2 Jones Bob Minnesota
    3 Roberts Craig Texas
    4 Clinton Bubba Arkansas
    You asked: Incorrect in what way?. In what way is it transformed from the database value? What is an example of a database value and a displayed value?
    Report query (select, id, last_name, first_name, home_state from example; )
    will yield the following results:
    ID LAST_NAME FIRST_NAME HOME_STATE
    1 Smith John Texas
    2 Jones Bob Texas
    3 Roberts Craig Texas
    4 Clinton Bubba Texas
    If I filter out the records based on HOME_STATE, for example (select, id, last_name, first_name, home_state from example where HOME_STATE = 'Indiana') I get:
    ID LAST_NAME FIRST_NAME HOME_STATE
    1 Smith John Texas
    But if I project the HOME_STATE column a second time in my query (select, id, last_name, first_name, home_state, home_state from example; )
    I get:
    ID LAST_NAME FIRST_NAME HOME_STATE HOME_STATE
    1 Smith John Indiana Indiana
    2 Jones Bob Minnesota Minnesota
    3 Roberts Craig Texas Texas
    4 Clinton Bubba Arkansas Arkansas
    Are there any displayed values for any rows that match the database table column values? No. One of my query predicates actually filters on HOME_STATE (let's I want to filter on Indiana, all rows will still display Texas in the HOME_STATE Column, even if all the records have a HOME_STATE of Indiana).
    What is the display type of the column in the report attributes? The column is just a varchar2, but I'm off the client site for now so will check back to confirm that that the display type of the column is correctly set.
    Appreciate the help.
    Earl

  • Incorrect Number of Pages Printing - Custom Paper Size

    Hello Everyone,
    I am new to Crystal Reports but have recently become responsible for supporting a report that my office has been using for several years.  We utilize a fairly simple Crystal Report to create temporary and guest parking passes in the parking services department of my University.  These passes simply take some data from our internal database and add the current and calculated expiration dates - again, pretty simple.  These passes are then printed on a custom paper stock roughly the size of a #10 envelope that has a hole in the paper to hang around a car's rear view mirror.  This solution has been working for years but we have recently run into a very annoying problem.
    The passes are being printed from our four customer service computers.  Each computer is identical - an HP dc7900 workstation running Windows XP SP3 and Crystal Reports 11.  The computers also have identical printers; HP DeskJet 6940s.  A couple of weeks ago the customer service representatives who handle the parking passes started experiencing a problem.  When they would print a the report (the temporary or guest pass) the printer would occasionally pick up the custom page, make a strange grinding noise, and spit the page out without printing.  It was only by putting the paper back in a second or third time that the pass would actually print.  This problem seems to happen randomly with some people experiencing the problem more than others.
    Like I mentioned before, this method of creating the passes has been working for several years.  We have been using the same Crystal Report and the same printers.  One of the four CSRs has not experienced any problems with her printing - the passes come out of the printer correctly every time.  Other CSRs are able to specify only printing page 1 and the pass will print correctly; even though it is only a one page report to start with.  There is only one CSR who has the problem most frequently - about 80% of the time - and she cannot use the "print page 1" technique.  We have tried to figure out what sets her apart from the others but they should all have identical machines.
    In troubleshooting the problem I have attempted everything I could think of.  Our first thought was to clean the printer or swap it out with a spare, but this did not solve the problem.  Since it was happening on multiple computers, we thought the report was to blame.  We checked to make sure all of the data was fitting withing the margins, there were no extra sections or section breaks, and that the report had not been corrupted somehow.  We also tried to create a new report from scratch - again none of these actions helped.  I then tried to upgrade one computer to all of the latest updates available for Crystal Reports 11 from the website.  These updates did not solve the problem either.  The final straw was to re-image the computer to a known good state, but this did not help.
    Since we are still not sure of the root cause of the problem I have posted a similar topic on HP's customer support forum.  I was hoping that someone in the Crystal Reports community may have some insight into my problems as well.  I have searched through the forums previously and that's where I got many ideas including updating, checking for hidden/over sized text, changing the print engine, and turning of Data Execution Prevention.  However, none of these suggestions improved our situation.  Does anyone have any insights as to what could be causing our problem?  It is getting very annoying for the CSRs and I feel bad that I have not been able to come up with a solution for them.
    To recap, here are my environment specifications:
    -Crystal Reports 11
    -Windows XP Service Pack 3 + all available Windows Updates
    -HP dc7900 Workstations
    -HP DeskJet 6940 printers connected through USB
    -Microsoft Office 2007
    -McAfee Anti-Virus 8.7i
    I appreciate any help or guidance anyone can provide.  Thank you in advance for your support.
    Jeff

    The "strange grinding noise" leads me to believe it is the printer or paper stock.  I know you said you changed printers, but did you swap the printer having the problem with the one that never does?  My HP color laserjet makes a strange grinding noise now that the fuser needs to be replaced (which I will be doing this weekend).  Usually the louder the noise, the worse the printout looks...
    Nothing in Crystal should cause a printer noise...
    HTH,
    Carl

  • Quiz slides showing incorrect number of questions

    Morning everyone...
    I have courses that I have uploaded to our LMS. These have
    2-3 questions at the end of each course. The problem is that when
    taking the course and you get to the quiz questions; it will say
    question 1 of 5 yet there are only two quiz questions. Why is this
    happening? Is there a way to fix?
    Thanks,

    Hi there RDCBLANK
    Easy fix. You probably have Click Box objects on prior slides
    that are being factored in. Try tapping your F9 key to open the
    Advanced Interaction dialog. Then you can turn off the scoring for
    the Click Boxes and make that Question count accurate.
    Cheers... Rick

  • Error in Page SFSY-PAGE of SFSY-FORMPAGES

    Hi;
    When i enumerate the smartform pages with this in a textbox Page &SFSY-PAGE& of &SFSY-FORMPAGES&, and the number of pages is more than 10 it displays:
    Page 1 of  *, Page 2 of  *.....Page 1 of 10.. Page 1 of 11.....
    the first 9 pages the SFSY-FORMPAGES displays '*' but if the number of pages is less than 10 it doit well:
    Page 1 of 8... Page 2 of 8 ....
    What could be the problem...?
    Thanks on advance.
    David Fúnez
    Tegucigalpa, Honduras
    Corp. Mandofer

    Hi David,
    Look at OSS Note 588352. Use format like &SFSY-FORMPAGES(3Z)&.
    The length of the field will be longer and zero suppress.
    I hope you will get it
    Thanks
    Seshu

  • Problem with &SFSY-FORMPAGES&

    Hi All,
        When i was using the &SFSY-FORMPAGES& in smartforms, it was showing '*' till it reaches 10th page, from 11th page onwards it was showing total number of pages in the smartform. Can any one tell me the reason.
    Thanks in advance
    Jaya

    try this jaya....
    &SFSY-PAGE& of &SFSY-FORMPAGES(2z)&    or
    &SFSY-PAGE& / &SFSY-FORMPAGES(2z)&
    If you find it useful mark the points
    ~~Guduri

  • Get number of pages of adobe form before printing

    Dear Experts,
    I want to get number of pages adobe form will print before printing the form.
    Please suggest.

    Hello Sagar,
         Without executing the generated Function Module, it is not possible to get the page count of a form in driver program because the generated FM itself is responsible to execute the whole layout and determine the number of pages in the PDF output. The below screenshot shows the number of pages in the structure /1BCDWB/FORMOUTPUT of generated FM after the generated FM is executed successfully.
    I really don't know why you need the number of pages before calling the generated FM. But if you still need it, then you might need to call the whole FM cycle twice( FP_JOB_OPEN , Generated FM, and FP_JOB_CLOSE ).
    1) First time while calling the FM FP_JOB_OPEN, you need to modify the contents of SFPOUTPUTPARAMS structure. Send the blank values in fields GETPDF, REQNEW and REQIMM, and send the "X" in fields NOPREVIEW, NOPRINT and NOARCHIVE and 000 in field COPIES.
    The reason for doing this is, we do not want actual PDF output. We only want to determine the number of pages.
    2) Now execute the generated FM . You will get the number of pages in the structure /1BCDWB/FORMOUTPUT-PAGES as shown in screenshot above.
    3) Now call the FM FP_JOB_CLOSE as usual.
    4) Again call the FM FP_JOB_OPEN. This time you again need to modify the contents of SFPOUTPUTPARAMS structure reversely. Send the "X" in fields GETPDF, REQNEW and REQIMM, and send the blank values in fields NOPREVIEW, NOPRINT and NOARCHIVE and 001 in field COPIES.
    This time we need the actual PDF output.
    5) Now do the required processing with previously fetched number of pages before calling the generated FM.
    6) Now call the FM FP_JOB_CLOSE as usual.

  • Issue happened for SFSY-FORMPAGES sometimes

    I took SFSY-FORMPAGES to display the total pages, most of time, it works very well, but some time, the total pages are displayed as '*'.
    After deleting some spool on own spool list, it works again.
    Please give some advice.

    Try to use like this it will solve your problem for ever
    &SFSY-formpages(3CZ)&
    Close the thread once your question is answered.
    Regards,
    SaiRam

  • Why the statement: "IF SFSY-PAGE EQ SFSY-FORMPAGES" do not work?

    Hi gurus,
    I want to check if the current page is the last page and use this statement in Code Node:
    IF SFSY-PAGE EQ SFSY-FORMPAGES.
        V_G_SHOW = 'X'.
    ELSE.
    But when I try to debug this part of code, I find   SFSY-PAGE  and SFSY-FORMPAGES always have same value.
    Why?
    thanks

    Smartforms evaluate &SFSY-FORMPAGES& during the execution of the form.
    If you want to know the final number of pages, you have to execute the Windows at the end of the form. Look at OSS [Note 588352 - '*' when you output the total number of pages |https://service.sap.com/sap/support/notes/588352] so the window will be "late" executed and the data of &SFSY-FORMPAGES& and &SFSY-PAGE& may be different. (the note relates to "final" window)
    Regards

  • Page Numbering SFSY-FORMPAGES = *

    Hi,
    I have a Smartform where i'm using SFSY-FORMPAGES to get the total no of pages.
    The thing is that sometimes it prints ok like "11 of N", but sometimes it prints "23 of" or "9 of *".
    Any ideas why sometimes the total no of pages is not displayed or is displayed like *??.
    thanks!.

    You can correct it by following one of these two options:
    1. Write Page numbering with formatting option (4ZC). It would not get you * untill 9999 pages.
    Page &SFSY-PAGE& of &SFSY-FORMPAGES(4ZC)&
    2. Change the window type of the window which has the Page number text element to "Final Window"
    Regards,
    Naimesh Patel

  • Number of Page View is showing zero for Site web Analytics Reports

    Hi,
    We have enabled Site Web Analytics reports in our Site Collection but the Number of Page views is showing zero for all the dates. We have checked all the events to capture in Site Collection Audit settings, Reporting feature is also activated but still the
    count shows 0 for all the dates.
    There are other Site Collection that exists under that Web Application but they show the count for Number of Page views in Site.
    Any help would be appreciated.
    Regards,
    Vijay

    hi
    1-first check "Usage and Health Data Collection Proxy" is started, if not started:
    find usage proxy id with following command:
    Get-SPServiceApplicationProxy
    then start service with following command:
    $UsageApp = Get-SPServiceApplicationProxy | Where {$_.ID -eq "[usage proxy ID]"}
    $UsageApp.Provision()
    2-check following link:
    Popularity Trends populating 0 results
    yaşamak bir eylemdir

  • Automatically show number of pages in PDF on first (general) page?

    I want to have a field at my first page of pdf document which automatically shows how many pages are there in document. Is that possible, if yes, how? i know i can have number of pages in header, but I need special field inside body of my first (general) page of pdf document
    tnx in advance

    put the code: this.rawValue = xfa.layout.pageCount()
    (you can also insert it automatically as a floating field from the insert menu)

Maybe you are looking for