SFTP Archiving issue

I had set up a clients MARS to use SFTP archiving to a windows server. However, I found out from them that the SFTP server software was using a high amount of CPU resources on the server. A co-worker changed the SFTP server software and now the MARS will not connect to the SFTP server. He said it looks like the MARS will not accept the new SFTP server's SSH key. Is there a way to clear the old SFTP servers SSH key from the MARS?

The license key is cleared during the reset process. You must provide this license key during the initial configuration following a reset operation, and it is not restored as part of archived data. This caution does not apply to pnreset when used with one of the options.

Similar Messages

  • SFTP connection issue with Dreamweaver 2014

    I have a very weird SFTP connection issue with Dreamweaver CC (2014). I am on a Mac running 10.9.4 and have no problem connecting to my server through SFTP with Dreamweaver CS 6. However, using the exact same settings on CC (2014), I get the following error: "An FTP error occurred - cannot make connection to host. Your login or password is incorrect. Please check your connection information".
    I am truly at a loss here. Command line connection works without problems.
    Any thoughts?

    Hi there,
    Try after rebooting your system or in a different user account on MAC.
    Is there any limit with number of login sessions with your SFTP?
    Could you check with Filezila or similar FTP client and connect to your site, see if you get any error there?
    Thanks.

  • MM_EBAN Archiving Issue

    Dear All,
    Whilst trying archive purchase requisitions via the archiving object MM_EBAN i get the following error in my production system
    Job started                                                                               
    Step 001 started (program RM06BW47, variant 26PAC_3, user ID SHABEENB)                     
    Archiving session 000233 is being created                                                  
    Read Purchase Requisitions                                                                 
    Logical file name or logical path name incorrectly defined                                 
    Operating system message: No such file or directory                                        
    Archive file Z:\Archive_Data\MM_10260_103128.ARCH.ARCHIVE cannot be opened for write program
    Job cancelled after system exception ERROR_MESSAGE                                         
    There is no consistency in this error, at time the archiving happens successfully and most often than not the above problem occurs. What could be the problem, as for the process below are my step by step procedure.
    1. Selecting archiving object : MM_EBAN
    2. Select Preproc (Maintain a new variant, specify the purchase requisitions that need to be archived, processing options - production mode, detail log : complete --- save (leave value maintenance - YES)
    3. Select Write (Maintain a new variant, specify the purchase requisitions that need to be archived, processing options - production mode untick delete with test variant, detail log : complete --- save (leave value maintenance - YES)
    At this stage i identified sometimes the archive file gets created in our specified path and sometimes it doesnt and we get the error mentioned above)
    4. Select Delete (Archive selection - specify the file)
    As for the customizing settings
    Archiving object specific customizing
    we have maintained the following 
    1. Maintained settings for delete program (both test and production mode variant)
    Delete jobs
    1. Start automatically
    place file in storage system (start automatically)
    sequence
    delete before storing
    Please do help me in resolving the above issue,
    Thanks & Regards
    Shabeen Buhary

    Post issue to SAP

  • Download XMl file from SFTP: performance issue

    Hi All,
    I am downloading an XML file of size almost 15-20 MB from an SFTP using winSCP.
    A C# code is written in SSIS script component which loops the remote directory to find the recent file then it downloads it. This process is taking almost 20 minutes to run in SSIS.
    Could anyone please suggest me the optimized solution.
    few keynotes: 1> on SFTP, there will be always more number of files, say 50-60.
                         2> file size may grow with time
                         3> comparing filename to find latest file because filename is suffixed with timestamp e.g. filename_YYYYMMDD.xml
    below is my C# code used in script component
    public void Main()
    string hostName = (string)Dts.Variables["HostName"].Value;
    string userName = (string)Dts.Variables["UserName"].Value;
    string password = (string)Dts.Variables["Password"].Value;
    string sshHostKeyFingerprint = (string)Dts.Variables["SshHostKeyFingerprint"].Value;
    string winscpexecutablePath = (string)Dts.Variables["winscpExecutablePath"].Value;
    string localOutPath = (string)Dts.Variables["User::localOutPath"].Value;
    string remoteDirectory = (string)Dts.Variables["User::ftpRemoteDirectory"].Value;
    string latestFileName = null;
    List<DateTime> fileDate = new List<DateTime>();
    Dictionary<DateTime, string> dicfiledate = new Dictionary<DateTime, string>();
    // Setup session options
    SessionOptions sessionOptions = new SessionOptions
    Protocol = Protocol.Sftp,
    HostName = hostName,
    UserName = userName,
    Password = password,
    SshHostKeyFingerprint = sshHostKeyFingerprint
    try
    using (Session session = new Session())
    session.ExecutablePath = winscpexecutablePath;
    session.Open(sessionOptions);
    RemoteDirectoryInfo directory = session.ListDirectory(remoteDirectory);
    RemoteFileInfo[] fileInfo = new RemoteFileInfo[directory.Files.Count];
    if (fileInfo.Length <= 0)
    Dts.Variables["User::isFileExist"].Value = false;
    else
    Dts.Variables["User::isFileExist"].Value = true;
    List<string> lstFileNames = new List<string>();
    for (int i = 0; i < directory.Files.Count; i++)
    lstFileNames.Add(directory.Files[i].Name);
    Dictionary<DateTime, int> dictFinal = new Dictionary<DateTime, int>();
    for (int i = 0; i < lstFileNames.Count; i++)
    if (lstFileNames[i].StartsWith("metrics_"))
    int year = Convert.ToInt32(lstFileNames[i].Substring(8, 4));
    int month = Convert.ToInt32(lstFileNames[i].Substring(12, 2));
    int date = Convert.ToInt32(lstFileNames[i].Substring(14, 2));
    dictFinal.Add(new DateTime(year, month, date), i);
    var sortedDateTime = dictFinal.Keys.OrderByDescending(x => x);
    int latestFileIndex = dictFinal[Convert.ToDateTime(sortedDateTime.First())];
    latestFileName = lstFileNames[latestFileIndex];
    // files transfer mode
    TransferOptions transferOptions = new TransferOptions();
    transferOptions.TransferMode = TransferMode.Binary;
    TransferOperationResult transferResult;
    transferResult = session.GetFiles(remoteDirectory + latestFileName, @"" + localOutPath + @"\", false, transferOptions);
    transferResult.Check();
    // Print results
    bool fireAgain = false;
    foreach (TransferEventArgs transfer in transferResult.Transfers)
    Dts.Events.FireInformation(0, null,
    string.Format("Download of {0} succeeded", transfer.FileName),
    null, 0, ref fireAgain);
    Dts.TaskResult = (int)DTSExecResult.Success;
    catch (Exception e)
    Dts.Events.FireError(0, null,
    string.Format("Error when using WinSCP to Download files: {0}", e),
    null, 0);
    Dts.TaskResult = (int)DTSExecResult.Failure;

    Hi Rahul,
    Is it possible for you to get the latest file by comparing the CreationTime of these files other than comparing the file names? If so, you can try the code in Reza’s blog:
    http://www.rad.pasfu.com/index.php?/archives/30-Find-Last-Created-File-in-Special-Directory-SSIS.html 
    Alternatively, maybe you can try a free third party SFTP Task available on the CodePlex:
    http://ssissftp.codeplex.com/ 
    Regards,
    Mike Yin
    TechNet Community Support

  • File Adapter Archiving Issue

    Hi,
    THe file adapter archives the file, it doesn't save the entire contents of the file in the archive folder, but saves the first recordset (row) only in XML format. Did any body face similar issue, and what's the resolution to archive the contents of the file, the way it was sent.
    Thanks
    Pandari

    Hi Anil,
    Refer Archiving concepts in below links.
    http://help.sap.com/saphelp_nw73/helpdata/en/44/682bcd7f2a6d12e10000000a1553f6/content.htm?frameset=/en/44/6830e67f2a6d12e10000000a1553f6/frameset.htm
    http://scn.sap.com/docs/DOC-35572
    Warm Regards,
    DNK Siddhardha.

  • File adapter - Archive issue with adapter module

    Hi All,
    I have 2 issues here. We are currently using PI 7.11 EHp1 SP02.
    1. Arhival with "add time stamp" wont work. It just gives us an error message saying simpledate format exception.
    I have gone through the OSS note 1265534 and thought this will resolve the issue. But our BASIS team believes this note is only applicable for PI 7.1 SP01. Can you one using PI 7.11 SP02 comment on this?
    Note: Archive option with out add time stamp works fine.
    2. When I use adapter module in my sender file configuration, the archive option itself does not work. Read the official SAP help which says "To archive source files where a permanent error occurred during processing, set the indicator.
    A permanent error occurs either during the conversion of the file content, or in a module in the module processor."
    So the question here is, how do we make the error permanent? The only way to throw error from adapter module is using the ModuleException. It has 4  different constructors. I have used both
    ModuleException me = new ModuleException ("My error Msg"); and
    Module Exception me1 = new ModuleException ("Error String", new Throwable("My error Msg");
    In both the cases, the archival wont happen.
    Any ideas welcome.
    Thanks
    Jai

    Hi,
    I am using NFS protocol here not FTP. Sorry I dint mention that earlier.
    Thanks
    Jai
    Edited by: Jaishankar on Apr 1, 2010 9:55 AM
    Edited by: Jaishankar on Apr 6, 2010 11:10 AM

  • SFTP adapter issue with dupliacate files

    Hello Guys,
    I am working on file to proxy scenario on PI 7.31 Java only system.
    I am facing issue with SFTP sender adapter, i wanted to reprocess the same file again. Although i unchecked the duplicate file checkbox.
    File is not getting processed and adapter gives below error.
    Error while sending message: Message ID 1406196843/-1496048728/1376310205/103581509 already exists in database: com.sap.sql.exception.OpenSQLIntegrityConstraintViolationException: ORA-00001: unique constraint (UNKNOWN.obj#=24157) violated
    OpenSQLExceptionCategories: [NON_TRANSIENT, INTEGRITY_CONSTRAINT_VIOLATION]
    Note- SFTP component is 1.0 and patch level is 01.
    Please let me know if anyone have came accros such error and resolution for the same.
    Thanks,
    Sandip

    Hi Sandip,
    What is your PI SP level?, check if this note affects your system
    1635853 - Concurrency issue during load test
    1979353 - Recurring TxRollbackException with MODE_STORE_ON_ERROR stage configuration
    Check also this thread File Sender Adapter - Duplicate Message ID Issue - PI 7.31
    Regards.

  • SD Billing Document Archive Issue

    Hi Guru,
    I have encountered an issue related SD Billing Document Archive.
    The issue is like below :
    In our system there is provision that we can Archive SD through ""Services For Object"" option in VF02.
    Generally the way we archive it is as below steps:
    1. Open a particular billing document through VF02 which need to be archive.
    2. Then we click on ""Pricing Condition Header"" -> It takes you to the pricing detail screen with "Output" button in the application tool bar.
    3. Then we click on "Output" button -> It takes you to the screen throuh which o/p of the billing document is configured.
    4. We set the following parameters for archiving
        output type = ZTR1
        Medium = Printing output.
        Function = BP
       Partner = desired partner number
    5. Using ""Further Data" button we set the Dispatch time to "4. Send Immediately (when saving the application)""
    6. Using ""Communication method" we set the Logical destination to LP01 and storage mode to "3.Print and archive" and Print Immediately option tick marked
    7. Press save button created a single spool in Sp01 with spool number.
    In spool there is saving only one spool with only 1 spool request type. (say the print preview of spool request type contains 3 pages in 1 spool request)
    But when i am viewing the archiving document through vf03/vf02 in ""Services For Object""  I am able to find for the same spool 3 separate pages is in archived document.
    when i tried to find out the reason by debugging setting the breakpoint in the driver prog configured in NACE. the debugging cursor is not stopping there...
    So Guru what might be the possible reason because of which 3 separate pages in being archived instead of 1 and  the cursor is not getting stopped at the o/p type's driver prog.
    Please provide some guideline so that I can resolve this..
    Thanks & regards
    Saifur Rahaman

    Hi ,
    any update...I am still waiting for the feedback
    Thanks & regards
    Saifur Rahaman
    Moderator message: participation here is voluntary, nobody is obliged to reply, be patient.
    Edited by: Thomas Zloch on Dec 7, 2010 11:38 AM

  • Solaris 9 U7 (2004/09) MultiLayered Flash Archive issue + solution ?

    In Solaris 9 Update 7 (2004/09) the multilayered flash archive installation feature is broken.
    I think that this is a known issue:
    4945516 Failure of multi-layered archive with Solaris 9 4/03 on Postdeployment process
    I manage to flash my archives by changing the following statement found at line 24 of the file
    ../Solaris_9/Tools/Boot/usr/lib/flash/postdeployment_processing
    from
    if [ ! -L $FLASH_ROOT/etc/rc2.d/S98flash_reboot ] ; then
    to
    if [ -L $FLASH_ROOT/etc/rc2.d/S98flash_reboot ] ; then
    This issue is addressed in the patch 113434-22
    113434-22/SUNWinst/reloc/usr/lib/flash/postdeployment_processing
    But the if statement is not the good one.
    Is this correct ?
    Coco D.

    Ideas.. Hmm, none which seems that correct, but you could try some things.
    If it gets the wrong IP that could explain why it fails to copy the sysidcfg file.
    First you could try and do a snoop on the ethernet address;
    snoop ether 0:3:ba:14:c6:cd
    (you could also try the -v flag to increase the verbosity).
    The things you should look for are arp/rarp requests, the jumpstart client will use arp/rarp to determine its IP address, snoop will show you which server that responds, and what address it gets, futher more its a good idea to verify that the response to the bootparams requests comes from the correct server.
    Of course there might be other oddnesses as well.
    Was the data you provided extracts? If it was you should check the /etc/ethers and /etc/bootparams for duplicates entries, so there are no other occourances of the clients ehternet address in /etc/ethers, and no bogus entries starting with * or the same hostname in /etc/bootparams.
    If you added the client manually you could always try and use the Tools/rm_install_client and Tools/add_install_client scripts to add it again, these script sometimes detect problems with the configuration.
    Lastly you didn't show us your /etc/nsswitch.conf file, but i assume that it has "files" first for the ethers, hosts and bootparams entries?
    Good luck
    //Magnus

  • Lms 4.2 , Config Archival issue

    Hi
    Please have a look to the below image , what is the reason for this failed Archival and  how to solve this issue
    thanks
    Ibrahim

    The 25 success means LMS is working fine.
    The 277 failed means LMS has problems communicating with these devices.
    Causes can be:
    Bad credentials
    ACL's on the device not permitting LMS ip address to talk to the device.
    protocols (TELNET, SSH, RCP, SCP) not running on the devices.
    firewalls or ACL's on routers not permitting LMS protocols.
    Pick a single device, test the protocols comming from the server to the device, test credentials.
    Cheers,
    Michel

  • Business Partner Archiving Issue.

    Hi folks!
    We are using CRM 5.0 system. I want to archive one BP, for this I have used BUPA_REL_DA Tcode. when I am trying with this Tcode it is throughing the Error message - Business Partners is used in Business transaction.
    Then I have opened the BP and went to relation ship tab , I just tried to delete the relation ship then it is showing BP is already used in Org-Model. Then I went to PPOMA_CRM and opened the Employee.
    Now the issue, when I am trying to remove the entire BP, Then I am clicking on that delete button it is showing me in  disable mode. Please let me know how can I archive the BP?
    Regards,
    Anil.
    Edited by: Anil kumar on Jul 19, 2010 4:08 PM

    Hi Garcia!
    Thanks for your response.
    Could you please tell me, How can I get all the business transactions of this BP  to archive. Is there any Report to get all the business transactions related to this BP.
    If BP  is still used in a partner function of an transaction that I  have in my system? How can I see, Please provide me the path.
    I think it wont work,,, Some business transactions may usefull for client. How can we propose this option to them? My story is client  created new BP so they want to archive the old one.
    Sorry for questioning again and again,, Is there any other possibility to archieve the old one?
    Regards,
    Anil.
    Edited by: Anil kumar on Jul 22, 2010 6:34 PM

  • SFTP- permission issue

    Hi SuperSAs,
    I have one issue with SFTP, one of our user complaint me that whenever he create a directory by using his SFTP id the permission set to 750.
    He requested me to set his permission to 770.
    i checked his profile and found that umask is already set to 007, below is the output for his profile.
    #grep Ftpid /etc/passwd
    Ftpid:x:21613:15890:SFTP ID:/home/Ftpid:/bin/false
    Sun2008:/home/Ftpid# more .profile
    # This is the default standard profile provided to a user.
    # They are expected to edit it to meet their own needs.
    MAIL=/usr/mail/${LOGNAME:?}
    umask 007
    I need to set permission 770 as a default from him so that from next time onwards whenever he create any directory it should have permission 770.
    Please help me on same.
    Thanks
    Rahul

    Dual SIM Phones Supporting Dual Standby: It was very normal for one cell phone to accommodate a piece of SIM card. However, that happened before. Since the birth of dual SIM dual standby mobile phones, one SIM cell phones will be out of date soon. Dual SIM dual standby mobile phones satisfy with the needs and requirements of one machine more SIM cards to many businessmen in the fast-paced commercial society. You can insert two SIM cards (some cell phones have even 3 SIM card slots) into one cell phone, and the two SIM cards are on line simultaneously, needless to switch between them. Surely, if you only want one of them is on line, you can set it in menu, as dual SIM dual standby mobile phones support four modes (dual SIMs, SIM1, SIM2, Flight mode). Besides, most dual SIM dual standby phones at onThesource.com support dual Bluetooth, you can phone and listen to music via Bluetooth devices.
    http://www.onthesource.com/cell-phones-mobile-phones/dual-sim-mobile/

  • Archiver  Issue| Automatic replication process | Archiver thread blocking

    Hi,
    Recently, we are facing a strange issue with Archiver auto replication process. Sometime, archiver thread is blocking and auto replication is stalling. We observed this issue after we apply latest OUCM patches downloded from Oracle support site.
    As an work around, we are doing UCM restart.
    Anybody got this kind off issue? We are following this up with Oracle in parallel. Any help regarding this is highly appreciated.
    Gowtham J

    What version/patch set/core update of UCM are you using?
    Jonathan
    http://redstonecontentsolutions.com
    http://corecontentonly.com

  • Archiving issue in material master

    Hi
    I am trying to delete the material master through SARA t.code
    1.enter the  archiving object  MM_MATNR
    2. then click write button enter the varient name(zarc..)click maintain
         then enter the materials ...tick the radio button production mode..save the varent
    3.then come back click the starttime  click time immediatly
    4.come back click spool parameters
    5. then comeback click deletion button  then enter user name
    6. then click select archive files..her popupscreen displayed but there are no files.....
    i have faced issue thre ..so next step how can i proceed..pls guide me any one...
    when i am go to job overview ... my job ststus is finished and cancelled ..it has ahoes both status ...than i goto joblogs..error displas like ...........
    Virus scan profile /SARC/ARCHIVING_ADK does not exist
    Message no. VSCAN032
    Diagnosis
    The virus scan profile /SARC/ARCHIVING_ADK was requested, but is not entered in the configuration of the virus scan profiles.
    System Response
    The virus scan profile cannot be retrieved.
    Procedure for System Administration
    Check the configuration of the virus scan profiles.
    regards
    Sesidhar

    HI,
    ADK-based archiving relies on two main elements, which are used for the development and administration of archiving solutions: Archive Development Kit (ADK) and Archive Administration (transaction SARA).
    ADK and SARA are part of the standard SAP Web Application Server. ADK is the Application Programming Interface used by the applications to develop archiving solutions, while Archive Administration (transaction SARA) is used mainly by data archiving administrators to manage all tasks related to data archiving, including job scheduling and management, writing, reading and deletion of data, as well as Customizing.
    Pls check the link:http://help.sap.com/erp2005_ehp_03/helpdata/EN/ed/18cc38e6df4741a264bddcd4f98ae2/frameset.htm
    This issue is to be solved with the ABAP consultant, dealing with the Web based applicaitions...
    Regards
    Priyanka.P

  • Archiving Issue!!!! Need an urgent reply

    My DB size is (62 GB) but the problem create 80 to 90 archiving on daily
    basis & one day total archiving size of the day is 30GB.Some times archiving size goes to
    49 or 50 GB.
    The thing I can't understand is that there is not much enough DML & DDL
    perform in this DB then how this DB creates a lot of archiving.
    Plz help me regarding this issue....Thanks in advanced...

    Any chance you know the version number (3+ decimal places) of your database?
    If it is missing some patches ... apply them and ask again.
    What is in your alert log?
    PS: Your question has nothing to do with SQL and PL/SQL and likely should have been posted in the General Database forum.
    You might want to consider, in the future, posting where your topic is ON topic.

Maybe you are looking for

  • Urgent help with If statement please!

    HI Everyone Was wondering if anyone can tell me why flash seems to be ignoring my If Statements, every time I try to use one it ignores the condition and just actions the command. Its driving me crazy. I'm sure I must be doing something wrong I just

  • Add one column to the screen exits

    Hi All     I am doing Screen Exits, here i have to add one column to the screen and it have to retrive the data from the specified fields anyone plz give me the solution.

  • Difference in ASA module, ASA 5510

    Folks, I am trying to get some comparison good data on the Cisco ASA(5585 probably) module and the Cisco 5510 physical device. We are looking to create contexts and most of these contexts are dynamic in nature. What could be the advantages and disadv

  • Movement type 622, increase blocked stock

    Dear Community Got a problem with movement type 622. Our rental tool process looks as follow: 1. Rental tool order (ZROT) for Material type LWRK 2. Outbound delivery (ZLF): post material from unrestricted use to customer returnable stock 3. Return or

  • IPod Killed my Sound Quality

    I recently bought my wife an iPod. Shortly after plugging it in the first time I noticed that the sound quality playing through my soundsticks is horrible. The music is flat, muffled and sounds like an old AM radio. I tried turning off the sound enha