Sftp is taking much time to execute

Hi,
I am working on SFTP .
SFTP is working but while executing, sftp is taking 8min to execute.
Do i need to set properties regarding time ?
Regards,
Divya.

Hi,
Use smaller polling interval for high throughput scenarios where the message size is not very large
Regards
Abhi

Similar Messages

ExecuteQuery method of view object taking much time to execute

Hi All,
I am using a view object and execute the VO query using executeQuery method in VOImpl java.
But, problem is, it is taking long time to bring the results after executing the query after setting the parameters. Same query in TOAD gives 4 seconds. While executing using executeQuery method, it is taking 5 mins.
It is urgent issue. Please help me. Thanks.
Regards, Soorya

Hi Kali,
Thanks for your prompt response.
Yes. It has bind parameters. I have printed the statement before and after the executeQuery method
++VOImpl Code snippet++
setWhereClauseParams(params);
System.out.println("before executing query:Time:"+System.currentTimeMillis());
executeQuery();
System.out.println( "after executing query:Time:"+System.currentTimeMillis());
+++
I have removed some conditions in the query as it is business confidential. Please find the jdev log.
++++++++
before executing query:Time:1322071711046
[724] Column count: 41
[725] ViewObject close prepared statements...
[726] ViewObject : Created new QUERY statement
[727] ViewObject: VO1
[728] UserDefined Query: SELECT DISTINCT
ai.invoice_num invoice_num
FROM ap_invoices_all ai
, ap_checks_all ac
WHERE ...
ai.org_id = :p_orgid
AND ac.id = :p_id
[729] Binding param 1: ,468,
[730] Binding param 2: 247
[731] The resource pool monitor thread invoked cleanup on the application module pool, AM, at 2011-11-23 23:41:32.781
after executing query:Time:1322072052875
+++++++
Regards,
Soorya

Query taking much time to execute

The following query is taking more than 4hrs to execute.
select l_extendedprice , count(l_extendedprice) from dbo.lineitem group by l_extendedprice
Cardinality of table : 6001215 ( > 6 million)
Index on l_extendedprice is there
ReadAheadLobThreshold = 500
Database version 7.7.06.09
I need to optimize this query. Kindly suggest way out.
Thanks
Priyank

Data Cache : 80296 KB
Ok, that's 8 Gigs for cache.
The index takes 16335 pages à 8 KB = 130.680 KB = 128 MB.
Fits completely into RAM - the same is true for the additional temp resultset.
So once the index has been read to cache I assume the query is a lot quicker than 4 hours.
6 Data Volumes
first 3 of size 51.200 KB
other 3 of size 1,048,576 KB
Well, that's not the smartest thing to do.
That way the larger volumes will get double the I/O requests which eventually saturates the I/O channel.
Yes looking at the cardinality of the table lots of I/O required but still more than 4 hrs is quite unrealistic. Some tuning is required.
We're not talking about the cardinality here - you want all the data.
We talk pages then.
And as we've seen, the table is not touched for this query.
Instead the smaller index is completely read in a index only strategy.
Loading 128MB from disk, creating temporary data in the same size and spilling out the information (and thereby reading the 128 MB temp size again) in 4 hours add up to ca. 384 MB/4 hours = 96 MB/hour = 1,6 MB/minute.
Not too good really - I suspect that the I/O system here is not the quickest one.
You may want to activate the time measurement and set the DB Analyzer interval to 120 secs.
Then activate Command and Resourcemonitor and look for statements taking longer than 10 minutes.
Now run your statement again and let us know the information from Command/Resourcemonitor and check for warnings in the DBanalyzer output.
regards,
Lars

Owb job taking too much time to execute

While creating a job in OWB, I am using three tables,a joiner and an aggregator which are all joined through another joiner to load into the final table. The output is coming correct but the sql query generated is very complex having so many sub-queries. So, its taking so much time to execute. Pls help me in reducing the cost.
-KC

It depends on what kind of code it generates at each stage. The first step would be collect stats for all the tables used and check the SQL generated using EXPLAIN PLAN. See which sub-query or inline view creates the most cost.
Generate SQL at various stages and see if you can achieve the same with a different operator.
The other option would be passing HINTS to the tables selected.
- K

Database tableAUFM hitting is taking much time even secondary index created

Hi Friends,
 There is report for Goods movement rel. to Service orders + Acc.indicator.
 We have two testing Systems(EBQ for developer and PEQ from client side).
 EBQ system contains replica of PEQ every month.
 This report is not taking much time in EBQ.But it is taking much time in PEQ.For the selection criteria I have given,both systems have same data(Getting same output).
The report has the follwoing fields on the selection criteria:
A_MJAHR Material Doc. Year (Mandatory)
S_BLDAT Document Date(Optional)
S_BUDAT Posting Date(Optional)
S_LGORT Storage Location(Optional)
S_MATNR Material(Optional)
S_MBLNR Material Documen(Optional)t
S_WERKS Plant(Optional)
Client not agrrying to make Material Documen as Mandatory.
The main (first) table hit is on AUFM table .As there are non-key fileds as well in where condition,We have cretaed a secondary index as well for AUFM table on the following fields:
BLDAT
BUDAT
MATNR
WERKS
LGORT
Even then also ,in PEQ sytem the report is taking very long time ,Some times not even getting the ALV output.
What can be done to get teh report executed very fast.
<removed by moderator>
The part of report Soure code is as below:
<long code part removed by moderator>
Thanks and Regards,
Rama chary.P
Moderator message: please stay within the 2500 character limit to preserve formatting, only post relevant portions of the code, also please read the following sticky thread before posting.
Please Read before Posting in the Performance and Tuning Forum
locked by: Thomas Zloch on Sep 15, 2010 11:40 AM

Hi Friends,
 There is report for Goods movement rel. to Service orders + Acc.indicator.
 We have two testing Systems(EBQ for developer and PEQ from client side).
 EBQ system contains replica of PEQ every month.
 This report is not taking much time in EBQ.But it is taking much time in PEQ.For the selection criteria I have given,both systems have same data(Getting same output).
The report has the follwoing fields on the selection criteria:
A_MJAHR Material Doc. Year (Mandatory)
S_BLDAT Document Date(Optional)
S_BUDAT Posting Date(Optional)
S_LGORT Storage Location(Optional)
S_MATNR Material(Optional)
S_MBLNR Material Documen(Optional)t
S_WERKS Plant(Optional)
Client not agrrying to make Material Documen as Mandatory.
The main (first) table hit is on AUFM table .As there are non-key fileds as well in where condition,We have cretaed a secondary index as well for AUFM table on the following fields:
BLDAT
BUDAT
MATNR
WERKS
LGORT
Even then also ,in PEQ sytem the report is taking very long time ,Some times not even getting the ALV output.
What can be done to get teh report executed very fast.
<removed by moderator>
The part of report Soure code is as below:
<long code part removed by moderator>
Thanks and Regards,
Rama chary.P
Moderator message: please stay within the 2500 character limit to preserve formatting, only post relevant portions of the code, also please read the following sticky thread before posting.
Please Read before Posting in the Performance and Tuning Forum
locked by: Thomas Zloch on Sep 15, 2010 11:40 AM

LOV is slow after selecting a value its taking much time to default

Hi,
I have a dependent LOV. Master LOV is executing fine and its populatin into the field fastly. But Child LOV is very slow after selecting a value its taking much time to default.
Can any one please help me if there is any way to default the value fast after selecting a value?
Thanks,
Mahesh

Hi Gyan,
Same issues in TST and PROD instances.
In my search criteria if i get 1 record, even after selecting that value its taking much time to default that value into the field.
Please advice. Thanks for your quick resp.
Thanks,
Mahesh

Taking much time for loading data

Dear All
While loading data in PRD system (for master data and transaction data), it's taking much time. For ex., 2LIS_05_QOITM, I am loading delta data only in PSA from R/3. Some times (yesterday) it's taking 2 mins and some times (today) it's taking 5 hrs not yet completed (it's yellow). Actually yesterday, we went to SM58 in R/3 side and executed that LUW for some other data sources. Now also we can do but we don't want to like that. Because we are expecting permanent soulution. Could u please advice me. I am getting below message in status tab
Errors while sending packages from OLTP to BI
Diagnosis
No IDocs could be sent to BI using RFC.
System Response
There are IDocs in the source system ALE outbox that did not arrive in the ALE inbox of BI.
Further analysis:
Check the TRFC log.
You can access this log using the wizard or the menu path "Environment -> Transact. RFC -> In source system".
Error handling:
If the TRFC is incorrect, check whether the source system is fully connected to BI. In particular, check the authorizations of the background user in the Errors while sending packages from OLTP to BI
Diagnosis
No IDocs could be sent to BI using RFC.
System Response
There are IDocs in the source system ALE outbox that did not arrive in the ALE inbox of BI.
Further analysis:
Check the TRFC log.
You can access this log using the wizard or the menu path "Environment -> Transact. RFC -> In source system".
Error handling:
If the TRFC is incorrect, check whether the source system is fully connected to BI. In particular, check the authorizations of the background user in the source system.
I am loading data through Process chain and user is BWREMOTE (authorized user).
Please help me.
Thanks a lot in advance
Raja

Dear Karthik
No I couldn't resolve till now
But Everything is fine.
Now status is yellow only (209 from 209). Now what i want to do.
Im getting below message in status tab
Missing data packages for PSA Table
Diagnosis
Data packets are missing from PSA Table . BI processing does not return any errors. The data transport from the source system to BI was probably incorrect.
Procedure
Check the tRFC overview in the source system.
You access this log using the wizard or following the menu path "Environment -> Transact. RFC -> Source System".
Error handling:
If the tRFC is incorrect, resolve the errors listed there.
Check that the source system is connected properly to BI. In particular, check the remote user authorizations in BI.
In detail tab, I am getting below message
Info IDoc 2 : sent, not arrived ; IDoc ready for dispatch (ALE service)
Thanks in advance
Raja

Taking much time when trying to Drill a characterstic in the BW Report.

Hi All,
When we are executing the BW report, it is taking nearly 1 to 2 mins then when we are trying to drill down a characterstic it is taking much time nearly 30 mins to 1 hour and througing an error message that,
"An error has occared during loading. Plese look in the upper frame for further information."
I have executed this query in RSRT and cheked the query properties,
this quey is bringing the data directly form Aggregates but some chares are not avalable in the Agrregtes.
So... after execution when we are trying to drill down the chars is taking much time for chars which are not avilable in the Aggregates. For other chars which are avilable in the Aggregates it is taking only 2 to 3 mins only.
How to do the drill down for the chars which are not avilable in the Aggregates with out taking much time and error.
Could you kindly give any solution for this.
Thanks & Regards,
Raju. E

Hi,
The only solution is to include all the char used in the report in the aggregates or this will the issue you will face.
just create a proposal for aggregates before creating any new aggregates as it will give you the idea which one is most used.
Also you should make sure that all the navigation characteristics are part of the aggregates.
Thanks
Ajeet

Discoverer report is taking much time to open

Hi
All the discoverer report are taking much time to open,even query in lov is taking 20 -25 min.s.We have restart the services but on result found.
Please suggest what can be done ,my application is on 12.0.6.
Regards

This topic was discussed many times in the forum before, please see old threads for details and for the docs you need to refer to -- https://forums.oracle.com/forums/search.jspa?threadID=&q=Discoverer+AND+Slow&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

ODS Activation is taking much time...

Hi All,
Some times ods activation is taking much time. Generally it takes 30 mins and some times it take 6 hours.
If this activation is taking much, then if i check sm50 ...i can see that there is a piece of code is taking much time.
SELECT
COUNT(*) , "RECORDMODE"
FROM
"/BIC/B0000814000"
WHERE
"REQUEST" = :A0 AND "DATAPAKID" = :A1
GROUP BY
"RECORDMODE"#
Could you please let me know what are the possiblites to solve this issue.
thanks

Hello,
you have 2 options:
1) as already mentioned, cleanup some old psa data or change log data from this psa table or
2) create a addtional index for recordtype on this table via Tcode se11 -> indexes..
Regards, Patrick Rieken.

HT1544 i have downloaded mac os 10.5 leopard update version successfully . but try to instal it is taking much time and the status bar is not going

Hi < i have updated my mac 10.5 with 10.5.8 sucessfully , but while instaling it is taking much time and status bar is not showing any progress

If I remember correctly one of the updates could hang after doing the update. Fixed by a restart but installing a combo update over the top of others rarely does any harm and it may be the best thing to do.

Adding column is taking much time. How to avoid?

ALTER TABLE CONTACT_DETAIL
ADD (ISIMDSCONTACT_F NUMBER(1) DEFAULT 0 NOT NULL
,ISREACHCONTACT_F NUMBER(1) DEFAULT 0 NOT NULL
Is there any way that to speed up the execution time of the query?
It's more than 24 hrs completed after started running the above script.
I do not know why it is taking much time.
Size of the table is 30 MB.

To add a column the row directory of every record must be rewritten.
Obviously this will take time and produce redo.
Whenever something is slow the first question you need to answer is
'What is it waiting for?' You can do so by investigating by various v$ views.
Also, after more than 200 'I can not be bothered to do any research on my own' questions, you should know you don't post here without posting a four digit version number and a platform,
as volunteers aren't mind readers.
If you want to continue to withheld information, please consider NOT posting here.
Sybrand Bakker
Senior Oracle DBA
Experts: those who did read documentatiion and can be bothered to investigate their own problems.

Taking long time to execute views

Hi All,
my query is taking long time to execute(i am using standard views in my query)
XLA_INV_AEL_GL_V , XLA_WIP_AEL_GL_V -----these standard views itself taking long time to execute ,but i need the info from this views
WHERE gjh.je_batch_id = gjb.je_batch_id AND
gjh.je_header_id = gjl.je_header_id AND
gjh.je_header_id = xlawip.je_header_id AND
gjl.je_header_id = xlawip.je_header_id AND
gjl.je_line_num = xlawip.je_line_num AND
gcc.code_combination_id = gjl.code_combination_id AND
gjl.code_combination_id = xlawip.code_combination_id AND
gjb.set_of_books_id = xlawip.set_of_books_id AND
gjh.je_source = 'Inventory' AND
gjh.je_category = 'WIP' AND
gp.period_set_name = 'Accounting' AND
gp.period_name = gjl.period_name AND
gp.period_name = gjh.period_name AND
gp.start_date +1 between to_date(startdate,'DD-MON-YY') AND
to_date(enddate,'DD-MON-YY') AND
gjh.status =nvl(lstatus,gjh.status)
Could any one help me to execute it fast?
Thanks
Madhu

[url http://forums.oracle.com/forums/thread.jspa?threadID=501834&tstart=0]When your query takes too long...

Stopping a Query taking more time to execute in runtime in Oracle Forms.

Hi,
In the present application one of the oracle form screen is taking long time to execute a query, user wanted an option to stop the query in between and browse the result (whatever has been fetched before stopping the query).
We have tried three approach.
1. set max fetch record in form and block level.
2. set max fetch time in form and block level.
in above two method does not provide the appropiate solution for us.
3. the third approach we applied is setting the interaction mode to "NON BLOCKING" at the form level.
It seems to be worked, while the query took long time to execute, oracle app server prompts an message to press Esc to cancel the query and it a displaying the results fetched upto that point.
But the drawback is one pressing esc, its killing the session itself. which is causing the entire application to collapse.
Please suggest if there is any alternative approach for this or how to overcome this perticular scenario.
This kind of facility is alreday present in TOAD and PL/SQL developer where we can stop an executing query and browse the results fetched upto that point, is the similar facility is avialable in oracle forms ,please suggest.
Thanks and Regards,
Suraj
Edited by: user10673131 on Jun 25, 2009 4:55 AM

Hello Friend,
You query will definitely take more time or even fail in PROD,becuase the way it is written. Here are my few observations, may be it can help :-
1. XLA_AR_INV_AEL_SL_V XLA_AEL_SL_V : Never use a view inside such a long query , becuase View is just a window to the records.
and when used to join other table records, then all those tables which are used to create a view also becomes part of joining conition.
First of all please check if you really need this view. I guess you are using to check if the records have been created as Journal entries or not ?
Please check the possbility of finding it through other AR tables.
2. Remove _ALL tables instead use the corresponding org specific views (if you are in 11i ) or the sysnonymns ( in R12 )
For example : For ra_cust_trx_types_all use ra_cust_trx_types.
This will ensure that the query will execute only for those ORG_IDs which are assigned to that responsibility.
3. Check with the DBA whether the GATHER SCHEMA STATS have been run atleast for ONT and RA tables.
You can also check the same using
SELECT LAST_ANALYZED FROM ALL_TABLES WHERE TABLE_NAME = 'ra_customer_trx_all'.
If the tables are not analyzed , the CBO will not be able to tune your query.
4. Try to remove the DISTINCT keyword. This is the MAJOR reason for this problem.
5. If its a report , try to separate the logic in separate queries ( using a procedure ) and then populate the whole data in custom table, and use this custom table for generating the
report.
Thanks,
Neeraj Shrivastava
[email protected]
Edited by: user9352949 on Oct 1, 2010 8:02 PM
Edited by: user9352949 on Oct 1, 2010 8:03 PM

Query is taking more time to execute

Hi,
Query is taking more time to execute.
But when i execute same query in other server then it is giving immediate output.
What is the reason of it.
thanks in advance.

'My car doesn't start, please help me to start my car'
Do you think we are clairvoyant?
Or is your salary subtracted for every letter you type here?
Please be aware this is not a chatroom, and we can not see your webcam.
Sybrand Bakker
Senior Oracle DBA

Sftp is taking much time to execute

Similar Messages

Maybe you are looking for