Sftp on Solaris 10 with ssh_config(5) support?

Solaris 10 comes with sftp as part of its image. Underneath, it uses sun-ssh, which supports ssh_config(4).
Is there any patches/upgrades out there that supports ssh_config(5)?
Thanks very much in advance for your help,
pam

The key part is to have the devices you need: null and log, at a minimum.
You can't create devices in a local zone: mknod says "not owner". Doesn't matter whether you zlogin or ssh in.
Instead, create the devices from the global zone in your zone's filesystem. Create all your directories within the zone.
If you have zone foo with it's root /export/zone/foo and you have some home directory in the zone /export/home/chroot
cd /export/zone/foo/root/export/home/chroot/dev
mknod log c 21 5
mknod null c 13 5
(I'm assuming you have the same major/minor as in my system; verify first with ls -l /dev/log and ls -l /dev/null )

Similar Messages

  • Chroot SFTP on Solaris 10

    Hi everyone,
    Does any know how to implement chrooted sftp on solaris 10? I found an very good articale about this on the internet -http://www.brandonhutchinson.com/chroot_ssh.html.
    But it deals with ssh from the open source community(OpenSSH). The ssh on Solaris 10 is provided by Sun as shown below:
    # pkginfo |grep -i ssh
    system SUNWsshcu SSH Common, (Usr)
    system SUNWsshdr SSH Server, (Root)
    system SUNWsshdu SSH Server, (Usr)
    system SUNWsshr SSH Client and utilities, (Root)
    system SUNWsshu SSH Client and utilities, (Usr)
    Could anyone shed a light on how to chroot the ssh/sftp provided by Sun?
    Best regards,
    Alex Lai

    The key part is to have the devices you need: null and log, at a minimum.
    You can't create devices in a local zone: mknod says "not owner". Doesn't matter whether you zlogin or ssh in.
    Instead, create the devices from the global zone in your zone's filesystem. Create all your directories within the zone.
    If you have zone foo with it's root /export/zone/foo and you have some home directory in the zone /export/home/chroot
    cd /export/zone/foo/root/export/home/chroot/dev
    mknod log c 21 5
    mknod null c 13 5
    (I'm assuming you have the same major/minor as in my system; verify first with ls -l /dev/log and ls -l /dev/null )

  • Weblogic Core Dumps on Solaris with Hotspot Server VM

    For Sun Microsystems SPARC with Solaris 2.7 the supported platform is
    "SunSoft SDK 1.3.1 JavaTM 2 Runtime Environment, Standard Edition (build
    1.3.1-b24) Java HotSpotTM Server VM (build 1.3.1-b24, mixed mode)"
    We have set the MaxPermSize as specified below and are still receiving
    periodic core dumps in a production environment. The most recent of which
    is "Unexpected Signal : 11 occurred at PC=0xee4b5d00 Function
    name=JVM_CurrentTimeMillis" a reported bug on Sun's bug parade (Bug Id
    #4488864). Are there some other settings that we should try? Is there a
    more stable VM we should be using like "SunSoft SDK 1.3.0 JavaTM 2 Runtime
    Environment, Standard Edition (build 1.3.0) "?
    Help would be appreciated,
    Thanks
    Problems with JDK 1.3 crashing
    If you have problems with OutOfMemory errors and the JVM crashing with JDK
    1.3, try setting: -XX:MaxPermSize=128m. There is currently an open bug on
    Sun's bug parade that describes this problem. See,
    http://developer.java.sun.com/developer/bugParade/bugs/4390238.html

    FYI: Stability seems to have been achieved by setting:
    -XX:MaxNewSize=64m
    -XX:MaxPermSize=128m
    "Paul Hamill" <[email protected]> wrote in message
    news:[email protected]..
    Unfortunately we tried switching to client and we still periodically getthe
    core dumps.
    "Dimitri Rakitine" <[email protected]> wrote in message
    news:[email protected]..
    I'd be interested to know this as well - so far the only stable option
    that I know of is to use client JVM. Server Hotspot crashes, sooner
    or later. 1.3.1-b24 server crashes as well, but not the client JVM.
    Paul Hamill <[email protected]> wrote:
    For Sun Microsystems SPARC with Solaris 2.7 the supported platform is
    "SunSoft SDK 1.3.1 JavaTM 2 Runtime Environment, Standard Edition
    (build
    1.3.1-b24) Java HotSpotTM Server VM (build 1.3.1-b24, mixed mode)"
    We have set the MaxPermSize as specified below and are still receiving
    periodic core dumps in a production environment. The most recent of
    which
    is "Unexpected Signal : 11 occurred at PC=0xee4b5d00 Function
    name=JVM_CurrentTimeMillis" a reported bug on Sun's bug parade (Bug Id
    #4488864). Are there some other settings that we should try? Is
    there
    a
    more stable VM we should be using like "SunSoft SDK 1.3.0 JavaTM 2Runtime
    Environment, Standard Edition (build 1.3.0) "?
    Help would be appreciated,
    Thanks
    Problems with JDK 1.3 crashing
    If you have problems with OutOfMemory errors and the JVM crashing with
    JDK
    1.3, try setting: -XX:MaxPermSize=128m. There is currently an open bugon
    Sun's bug parade that describes this problem. See,
    http://developer.java.sun.com/developer/bugParade/bugs/4390238.html
    Dimitri

  • Sun Solaris with Oracle 8i &java 1.3

    i am going to work on Sun solaris with Oracle 8i
    in Java platform
    is there any major issue to this combination
    pls , help me out to -> [email protected]
    Thanks in advance
    oviya

    I've been able to get Apache_1.3.(9|11|12)+PHP-(3.0.1[45]|4.0b4pl1)+Oracle-8.1.5.0.2 to work (OCI8 API calls) but with much difficulty.
    Compiling was pretty straightforward. I used APXS to load the PHP module. However, when I start Apache with the PHP modules loaded and added, Apache would die (no hints, etc.) What I did was start Apache without PHP loaded, reconfigure in PHP once Apache started and THEN restart apache. This works for me. Kinda tedious, though. And the time when Apache is running without support for PHP would allow anyone to see my PHP code with my database password.
    (Incidentally, how should I configure Apache so it doesn't serve files which end in .php[3] unless it was through the PHP module?)
    I've emailed the Apache OCI8 module developers about it (Stig and Thies) so I hope it'll be resolved soon.

  • Solaris 10 real-time support on a uniprocessor system

    Hello,
    I've read older documentation stating that Solaris has real-time support on a dual processor system. One of the CPUs is dedicated to the real time tasks. I was wondering
    if this is an absolute requirement. Could one use Solaris 10 as a real-time OS on a uni-processor system?
    Thanks for your help.
    Stephen

    Stephen,
    Solaris is capable of running processes in real-time mode on either a uni- or multiprocessor machine. real-time mode is implemented at the scheduler level, with RT class processes layered on top of TS/IA and SYS processes. This is mostly implemented through priority levels (0-59 for TS/IA, 60-99 for SYS, 100-159 for RT [if used]). For details regarding this, pls. see priocntl(1).
    Be aware of a couple of gotchas, though:
    - RT processes will stay at their priority level, no matter what.
    - They will not be subject to time-sliced scheduling (in fact, they won't be scheduled in normal ways, since the scheduler itself runs at SYS priority level!)
    - They'll not stop running until they either voluntarily give up the CPU by means of something like swtch(), or block on a resource, or any process with an even higher priority becomes runnable.
    In short, they might render your system more or less inoperable, if used without caution.
    Consider it a BAD idea to put your shell into RT mode - and definitely do NOT try to run largely computational tasks (PI to the nth position, as an example) in RT mode, just to get some more performance out of your box! It won't work as you expect it.
    RT is meant to run fairly short routines that require (almost ) deterministic response - such as acting on a signal from a sensor on an assembly line. It's definitely not a way to obtain better response times or outperform your peers.
    Solaris, as any UNIX, is not an outright RT system - it just has some stuff built into it that could help in running it as if it were one.
    Consider well what you're about to do, then reconsider ... ;) Don't say you haven't been warned.
    HIH, kind regards,
    - Tom

  • SFTP and FTPs with jsse

    Is it easy to implement the sFTP and FTPs with JSSE API? If it is, can anybody give me an sample for each of them?
    Can any kind of you show me some open source ftp client libraries which support secure ftp? Thank you very much!

    Is it easy to implement the sFTP and FTPs with JSSE API?On the contrary, it is impossible to implement SFTP with the JSSE API. What you need is an SSH API.
    You can implement FTPS with the JSSE API.

  • I have problem with account that i can't make update or buy from app store There is massage appear in my payment page that i must contact with i tunes support to complete this transaction Please help me to fixe this problem as soon possible Hany hassan 00

    I have problem with account that i can't make update or buy from app store
    There is massage appear in my payment page that i must contact with i tunes support to complete this transaction
    Please help me to fixe this problem as soon possible
    Hany hassan
    0096597617317
    0096596677186
    Thank you

    You need to Contact iTunes Support...
    Apple  Support  iTunes Store  Contact Us

  • I am trying to get help with WMPlayer tech support Adobe Reader cant open wmpsupport.htm files why?

    i am trying to get help with WMPlayer tech support Adobe Reader cant open wmpsupport.htm files why?

    Adobe Reader opens PDF files, nothing else.

  • New Realplayer 10.5 with Harmony Technology supports Zen produ

    hi,
    not sure if anyone knew about this but the New Realplayer 0.5 with Harmony Techology supports Zen products. It's a free download as well. It even works with my zen micro.
    Just wanted to share this information. Maybe it might help those having trouble with WMP or Zen explorer/creative mediasource.....just another alternati've worth trying........
    Also, I found it convenient that instead of dragging and dropping files into zen micro....you can just highlight/select the mp3s you want to transfer in the music library, right click, select copy to --> zen micro...and that's it...very easy all in one step...
    <SPAN class=time_text>Products supported and their drivers can be found on this page:
    <SPAN class=time_text>http://music.guide.real.com/realplayerdevices
    <SPAN class=time_text>
    Message Edited by Tiger23 on 0-2-2005 0:06 PM

    It's nice that someone else is using the Real Player 0.5 with Harmony Technology and thinks it is as great as I do.
    I have the Creative Zen Micro and my husband has the Nomad Muvo TX 256. After trying all the other players, including the, iTunes, Music Match, Windows Media Player 0 and the Creative Mediasource that was sent with our Creative Players, we both found ourselves using Real Player 0.5. It is so much easier to use and the Harmony Technology actually was the reason that I bought us the Creative players for Christmas.
    As a computer age newbie, married to a computer geek, am surprised that we both ended up using the Real Player 0.5 on our seperate computers. (His uses Windows XP and I use Windows 2000) Hope everyone will give it a try.
    Best wishes.

  • LightScribe SuperMulti DVD±R/RW with Double Layer Support is no longer able to read all lightscribe discs(Blank or Containing Data)

    Hi,
    The product Name of my computer is: HP Pavilion dv6-6093ex Entertainment
    Notebook PC support
    The number of my computer is : LM610EA#A2N.
    Could anyone please at this splendid forum take some of their precious time
    out to really reply my questions and solve my problems?
    FIRST OF ALL:
    My HP Pavilion Laptop is about 3 years old.
    My
    sister's Dell Inspiron laptop is 3 years old.
    My HP laptop is well-cared, as opposed to my sister's Inspiron Dell laptop, which is always thrown in dust without caring at all. Also, its battery is always inserted even when it is fully charged while the laptop is plugged in to the main power supply. 
    However, my laptop is either used on only battery, or on plugin. Also, it is kept from the dust. But, I really found that the battery of the Dell laptop still lasts about three and half hours, and there is no problem cooling fan is not properly properly.
    I only remember one thing differently done on my laptop battery which is I charged it fully, then I stored it without using it for about four months, then when I reused it, I found it got worse over time. I.e. first time of using it after storing,I found
    it empty, then I charged it again fully, however, then it lasted about 2 hours, then 1 and half hours, next an hour, now it is only lasting about 20 minutes without performance. If there is high performance, then
    the computer shuts down suddenly.
    My problem is follows:::
    First: Whenever I inserted any Containing Data OR  Data CD/DVD-RLightScribe discs, I found that HP optical driver was
    unable to read them. When clicking on the optical disc drive 'double-click' while disc was inserted, then I found that disc opened as this way(NOTE: With a CD/DVD player is grayed out)
    I  was told 'I suspect the culprit might be hardware and lightscribe dive might be
    corrupt. Please sent it to service center to check. In addition, this thread could be as a reference:
    http://answers.microsoft.com/en-us/windows/forum/windows_vista-hardware/media-in-cddvd-drive-is-not-readable/794fe26a-7e47-45c4-a50b-0af2ed53f75b'
    Since no one replied to me at HP forums, although my HP laptop is one of their products, I had to post my problem here to know if my driver is corrupted and needs to be replaced or not.
    Blank Or Used(containg data) CD/ DVD ±R/RW lightscirbe is unable to be read by optical drive
    When clicking on drive 'duble-click', I found it opens  like a USB FlashDrive or With a CD,DVD player, however,
    : Bare in mind that 'with CD/DVD Player'
    is grayed out)
    Not Blank(containing data) CD/ DVD ±R/RW NON -Lightscirbe disc opens normal:
    Blank CD/ DVD ±R/RW NON-lightscirbe opens normal(Opens like
    a USB FlashDrive or With a CD,DVD)::
    My LightScribe System Software version is:
    I've tried installed the latest version of lightscribe software, then I run
    the diagnostic utility, however, the problem still persists.
    My HP CD/DVD DVDآ±R/RW specs are::
    Optical Drives
    hp CDDVDW TS-L633R
    Media Type DVD Writer
    Name hp
    CDDVDW TS-L633R
    Availability Running/Full Power
    Capabilities Random
    Access, Supports Writing, Supports Removable Media
    Read capabilities CD-R,
    CD-RW, CD-ROM, DVD-RAM, DVD-ROM, DVD-R, DVD-RW, DVD+R, DVD+RW, DVD-R DL, DVD-RW
    DL, DVD+R DL
    Write capabilities CD-R, CD-RW, DVD-RAM, DVD-R, DVD-RW, DVD+R,
    DVD+RW, DVD-R DL, DVD+R DL
    Config Manager Error Code Device is working
    properly
    Config Manager User Config FALSE
    Drive E:
    Media Loaded
    FALSE
    SCSI Bus 0
    SCSI Logical Unit 0
    SCSI Port 0
    SCSI Target Id
    1
    Status OK
    Trying to solve the problem,
    I have done these steps in order::
    I tried checking with dignostic ulitiy:
    I have tried Advanced View , this is the file of output data ofdignostic utlity
    LightScribe System Software Settings:
    SOFTWARE\LightScribe\MessageDir C:\Program Files (x86)\Common Files\LightScribe\
    SOFTWARE\LightScribe\LSPrintDialog C:\Program Files (x86)\Common Files\LightScribe\LSPrintDialog.exe
    SOFTWARE\LightScribe\LSPrintingDialog C:\Program Files (x86)\Common Files\LightScribe\LSPrintingDialog.exe
    SOFTWARE\LightScribe\LsPrintLauncher C:\Program Files (x86)\Common Files\LightScribe\LSPrintLauncher.dll
    SOFTWARE\LightScribe\ResourceDir C:\Program Files (x86)\Common Files\LightScribe\res
    SOFTWARE\LightScribe\LSPrintAPI C:\Program Files (x86)\Common Files\LightScribe\LSPrintAPI.dll
    SOFTWARE\LightScribe\Update\UpdateShellCommand http://www.lightscribe.com/go/downloads/windows
    SOFTWARE\LightScribe\Update\PreviousVersion 1.18.20.1
    SOFTWARE\LightScribe\Update\CurrentVersion 1.18.27.10
    SOFTWARE\LightScribe\Update\TrailingVersion
    SYSTEM\CurrentControlSet\Services\LightScribeService\Type 16
    SYSTEM\CurrentControlSet\Services\LightScribeService\Start 2
    SYSTEM\CurrentControlSet\Services\LightScribeService\ErrorControl 0
    SYSTEM\CurrentControlSet\Services\LightScribeService\
    SYSTEM\CurrentControlSet\Services\LightScribeService\DisplayName LightScribeService Direct Disc Labeling Service
    SYSTEM\CurrentControlSet\Services\LightScribeService\ObjectName LocalSystem
    SYSTEM\CurrentControlSet\Services\LightScribeService\Description Used by the LightScribe software components to support 3rd party disc labeling applications using the LightScribe COM Application Programming Interface (LSCAPI). This service needs to run for LightScribe direct disc labeling to work.
    SYSTEM\CurrentControlSet\Services\Eventlog\Application\LightScribeService\
    SYSTEM\CurrentControlSet\Services\Eventlog\Application\LightScribeService\
    SYSTEM\CurrentControlSet\Services\Eventlog\Application\LightScribeService\TypesSupported 7
    SYSTEM\CurrentControlSet\Services\Cdrom\Enum\0 IDE\CdRomhp_CDDVDW_TS-L633R______________________0300____\4&334f7860&0&0.1.0
    SYSTEM\CurrentControlSet\Services\Cdrom\Enum\Count 2
    SYSTEM\CurrentControlSet\Services\Cdrom\Enum\NextInstance 2
    SYSTEM\CurrentControlSet\Services\Cdrom\Enum\1 SCSI\CdRom&Ven_ELBY&Prod_CLONEDRIVE&Rev_1.4\1&2afd7d61&0&000000
    SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon\allocatecdroms 0
    SYSTEM\CurrentControlSet\Services\CDRom\autorun 1
    SOFTWARE\INTEL\Intel Application Accelerator Not detected
    Drives and Media:
    Drive 0 : hp CDDVDW TS-L633R 0300 219 (E:), Media Imaging Parameter : 114
    I tried running the below command line to fix potential disk issue 'Chkdsk/r /f'
    I cleaned the drive, discs, and so on.
    I have uninstalled the all third-party data recording software.
    I have uninstalled the Cyber DVD suite, lightscribe system software
    which came pre-installed with my HP pavilion Notebook.
    I have recovered my system from the HP Factory Recovery discs.
    I have tried opening all those LightScibe discs not opening on my HP optical drive, on a Dell optical drive, and all of them were opened well, although Dell optical drive did not have a lightscribe feature at all., nor  third party disc recording software.
    However, the problem is still with opening the discs LIGHT-SCRIBE.
    Thus, my questions are:
    How to determine if the drive is corrupted and needs to be replaced with another one.
    I think there something needed to be done on the BIOS Of my HP laptop[[[A similar problems happened on my Desktop computer's optical drive which is as follows (ALL discs are opened as empty by Optical Drive of My Desktop Computer) ---while
    my optical drive of my desktop was connected to the
    primary slave IDE, and the HDD was connected to the primary master IDE, the optical drive and hard disk are functioning well. However, I remember that while burning an image with Nero essential V: 5, something went wrong, and
    then the Optical Drive of My Desktop Computer (HL-DT-ST DVD-RAM GH22NP20) became NOTrecognised/Installed on
    BIOS, although it was still shown on the device manager as a recognised device. Also, it was listed on my computer, however, when entering a disc(blank or with data) into the drive, I found it was not recognised, and it opened empty(no files
    at it), although it contains data. Thus, I decided to boot to BIOS, and clicked on 'Autodetection for IDE', then I found that only HDD was still shown as installed on BIOS.  However, the optical drive was not. Th I tried clicking on it on BIOS and then
    clicking on 'enter' to try to let the device be re-recognized. However, that
    made no difference. I had to take part my computer ,and then reconnected the optical drive onto thesecondary slave IDE , and let HDD connected to the same
    primary master IDE. Then, I found that the problem solved and all discs were read normally. Aslo, optical drive became installed on BIOS.
    What is meant with with double Layer Support.
    How much does it cost?
    A man should convert his anger and sadness into strength to continue living in this life.

    Did you try unsinatalling LightScribe application then checking the status ? 
    This is probably related to the faulty hardware or the application ( LightScribe
    Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
    the thread.
    Could you please really concentrate with me, and really reply to me to finish this problem pending.
    If you had had a look again at my first post, you would have seen that I said that I have done some things, among of which is: I have uninstalled the Cyber DVD suite, lightscribe system software
    which came pre-installed with my HP pavilion Notebook.
    Yes, you're right the two threads below are concerned about one issue.
    https://social.technet.microsoft.com/Forums/en-US/w7itpromedia/thread/5c1aa5e8-9728-492b-a5c3-387f29ee4b6e/#d6f63628-29a3-4adf-b33f-03b33c138910
    https://social.technet.microsoft.com/Forums/windows/en-US/683997ff-1004-4579-b69d-5e982746c917/lightscribe-supermulti-dvdrrw-with-double-layer-support-is-no-longer-able-to-read-all-lightscribe?forum=w7itpromedia
    However, this thread contains more precise details and screen shots about the problem. I was not able to understand whether all lightscribs were not unable to be read or not. However, I now recognized that, and I recognized that only all LightScribe(empty
    or used) discs are unable to be read. furthermore, that other thread got far too longer to be followed.
    Moreover, I would like you to take some time out to answer my problem about Lighstscribe discs since I am going to purchase 'A battery, Cooling Fan' From the HP agent in Yemen, which is far away from me about 1000 Km. Thus, If my optical disc drive was corrupted
    as well, then I would be requesting the 'optical disc  drive' as well from the HP along with 'Battery, Cooling Fan' .
    A man should convert his anger and sadness into strength to continue living in this life.

  • Dual OS system booting issue - Solaris with Windows XP Pro

    Hi,
    I have installed Windows XP Professional with SP2 on my laptop Dell Inspiron 6400 (Intel Core 2 Duo). I created partition as below,
    C: 25GB (Primary : Active) Installed XP
    D: 15GB (Primary) - Tried to install Solaris here
    F: 10GB (Primary)
    G: 20 GB (Logical)
    H: 20 GB (Logical)
    1. I tried to install Solaris 10, booted up system from DVD and selected Solaris. I got a message related to "License..." and it stopped right there, nothing showed up on screen after the message. I forced it to shutdown.
    2. Next, I tried with Solaris Express Developer edition DVD. I was able to proceed until "Install" option. After clicking "Install" button, it reported some account name(no account name found) setting problem and quitted from installation. It asked to remove the DVD manually. But I was not able to eject it, got stuck. I switched off it and removed DVD.
    When I bootup the system next time from HDD or CD or USB bootable backup, it showed blank screen and blinking cursor. I am not able to boot system with Win XP or USB Win Xp bootable. I am able to enter BIOS setup.
    Please let me know how to boot up Win Xp and install Solaris with it.

    with my little experience i find solaris 10 isn't able to install on sata hdd but with solaris express edition 5.11 i was able to install it on my lap top toshiba tecra and now i can boot with xp sp2 and solaris i hope this answer your question .

  • Insane day with Adobe India support becomes disaster

    I started with a few problems with Pr CS6 suddenly unable to render anything above 720 after the recent "updates".  After several hours with Adobe India "support" uninstalling video drivers and things kept getting worse and worse. Suddenly the support person, Richa Sethi, said it was time for her to go home... Gone!!! When I called back a few hours later I was told there was "no record" of my previous support call... and the new support person proceeded to do even more damage, concluding with the suggestion that I reolad the operating system. And all the programs. And all the updates. And all the rest.
    Not in any mood to waste a few dozen hours, I contacted Nivida (also in India, unfortuantely) who managed to at least restore the functions that Adobe India Support had managed to destroy... And now I can again use other programs (Edius 6.5)... but Premiere CS6 and CS5 still open to a blue screen... which is worse than when I started with only a rendering issue... and a DVD compliling issue... and a Media encoder failure problem. A few weeks back they spent a month on a codec issue... and failed to solve that problem. (I eventually found the solution in the forum)
    Somebody needs to start a very large class action lawsuit against Adobe for inflicting this kind of incompetence on an unsuspecting public. If I had some way of reverting my existing CS6 projects to CS5.5 or CS5 I would demand a total refund for this worthless waste of time masquerading as an "update" by Adobe. I will certainly NEVER buy another Adobe product. Ever.
    Hello, Adobe? You're not saving anything when your outourced foreign "support" wastes hours and hours and accomplishes absolutely nothing. Hire back the US techs who can speak clearly and actually solve problems instead of making things worse and worse and worse!!!
    I am so infuriated I am ready to chew the woodwork. Horrible, horrible, horrible!!!!!!!

    timtro wrote:
    The gist of the principal one seems to be "It is not our software, stupid.  It is your system."
    The "system" worked fine for CS4, CS5, CS5.5, Edius 6.5 and everything else. The problem was that after the "update", Premiere CS6 locked up on renders, CS6 Media Encoder stopped working after about 30 seconds and CS6 Encore could not complete a DVD without a brand new "hardware" error ... all appearing after the most recent updates. That's not "my system", that's Adobe software. When Adobe Support replaced the video driver that stopped working because it was not done correctly and Nvidia had to repair the damage.
    As to the language, it's like they are not paying attention. In a chat session I said that errors had appeared during the rendering process and their reply was "I understand you are having trouble installing the program".  Not even close!
    It is also clear that they do NOT adequately understand the software. They simply read from a database of "solutions". Watch in the chat and you will find word-for-word the same replies to the same keywords.
    Which is precisely my point!  So why take it issue with me?  Like most Adobe users, I have been burned by their "support".  I do not recall it being much better before it was out-sourced, either.

  • Printing from MacBook Pro 17" Mid 2010 running 10.8.2 ... persistent inability for Apple MacBook Pro to print to a variety of HP printers (have run Windows and Ubuntu on Parallels and same printers work) ... what is going on with Apple printer support?

    What is wrong with Apple's support of printers ... inability for MacBook Pros to connect with HP and other printers. Yet the same printers
    work under Mac OS based Parallels (running Windows or Ubuntu) - WHY?  Finger pointing (HP . Apple ... Apple > HP) ... who cares ... FIX IT ... this has gone on for months now. WHAT IS THE PROBLEM?

    HP discontinued support (read: stopped updating their OS X printer drivers) for a lot of their printers back when Apple released Snow Leopard and dropped even more when Lion was released.  This is an HP problem, not an Apple problem.
    Exacty what  printers are you having problems with?
    If any of your printers are on the HPIJS list, try installing the HPIJS drivers (there are 3 files to install, and it won't hurt anything).   This solved the issue for me on Snow Leopard, Lion and Mt. Lion with my older HP printers.

  • Problem with Variable Client Support

    Hello,
    I work with Labview 8.5 and Crio 9014.
    I have a problem with  Variable Client Support. When I try to compile my project I have the following error:
    "The Network Variable Engine and Variable Client Support must be installed on the RT target for this application to function properly..."
    I have read that we have to install the Variable Client Support in Measurement and Automation by right-clicking on the software and then choosing add/remove software but I can't install the appropriate shared variable components because I can't see neither Network Variable Engine and Variable Client Support. So what can I do?
    Can somebody help me?
    Thanks

    I have exactly the same problem. I wanted go through the "Getting Started with the LabVIEW RT module" and when I use wizard for generating new project I get same notification in my VI... 
    The Network Variable Engine and Variable Client Support must be installed on the RT target
    for this application to function properly. If the Network Variable Engine is not supported on
    the target (e.g. FP-2000 with <32MB of RAM), open the project and move the variable library
    to My Computer in the project. Doing this will deploy the variables to localhost but
    will still require that Variable Client Support be installed on the RT target.
    Could someone help please ? 
    Attachments:
    ni.png ‏95 KB

  • Solaris 8/9/10 Support for IA 64

    Hi,
    Can someone tell me whether Solaris 8/9/10 support Itanium 64-bit? If so, where can i find the software download for solaris Itanium?
    Thanks in advance.
    Regards,
    Jeevan

    How about OpenVMS as a different (non-Solaris) option, considering that Solaris doesn't appear to be available?

Maybe you are looking for

  • Adobe Reader in iPad

    I have a pdf form that I am able to fill the data using the Adobe Reader in iPad. I can fill the form and see the data. When I email the form using the email document option from the iPad I receive an email with the form attached but the data is lost

  • More than one fact tables...

    Hi. I have tried OLAP until now with only one fact table. But now I have more than one. To start i added one more. I am always using SOLVED LEVEL...LOWEST LEVEL. I am always receiving the following error when creating the cube with this measures: "ex

  • Error cloning 11.5.10.2 instance in rhel 5.4

    We tried to clone an 11i instance. It shows error message while running adcfgclone.pl in db tier The error came after 70% completed. [orapdev@server1 bin]$ perl adcfgclone.pl dbTier /pdev/p02/oracle/pixdb/9.2.0/appsutil/pdev_server1.xml Enter the APP

  • Search in Address book

    How can I quickly search for a particular name in address book on iPhone? I mean I want to quickly type "Smith" and it take me to Mr. Smith instead of moving throught the alphabet to get to "S" and then roll down to Smith.

  • Suggestions on Workflow w/ External HD

    I'm trying to find the best way to plan my workflow while I'm on the road. While I'm away from home, I will be uploading and editing photos to my laptop in LR and then when I'm home, I would like to store the files on my external harddrive, so that I