SFTP- permission issue

Hi SuperSAs,
I have one issue with SFTP, one of our user complaint me that whenever he create a directory by using his SFTP id the permission set to 750.
He requested me to set his permission to 770.
i checked his profile and found that umask is already set to 007, below is the output for his profile.
#grep Ftpid /etc/passwd
Ftpid:x:21613:15890:SFTP ID:/home/Ftpid:/bin/false
Sun2008:/home/Ftpid# more .profile
# This is the default standard profile provided to a user.
# They are expected to edit it to meet their own needs.
MAIL=/usr/mail/${LOGNAME:?}
umask 007
I need to set permission 770 as a default from him so that from next time onwards whenever he create any directory it should have permission 770.
Please help me on same.
Thanks
Rahul

Dual SIM Phones Supporting Dual Standby: It was very normal for one cell phone to accommodate a piece of SIM card. However, that happened before. Since the birth of dual SIM dual standby mobile phones, one SIM cell phones will be out of date soon. Dual SIM dual standby mobile phones satisfy with the needs and requirements of one machine more SIM cards to many businessmen in the fast-paced commercial society. You can insert two SIM cards (some cell phones have even 3 SIM card slots) into one cell phone, and the two SIM cards are on line simultaneously, needless to switch between them. Surely, if you only want one of them is on line, you can set it in menu, as dual SIM dual standby mobile phones support four modes (dual SIMs, SIM1, SIM2, Flight mode). Besides, most dual SIM dual standby phones at onThesource.com support dual Bluetooth, you can phone and listen to music via Bluetooth devices.
http://www.onthesource.com/cell-phones-mobile-phones/dual-sim-mobile/

Similar Messages

Lightroom 4 crashes when trying to open the slideshow module. I spent over three hours with both Adobe and Apple tech support and we know it is a permission issue but have not been able to get it solved. It started with the last upgrade to 10.8

Lightroom 4 crashes when trying to open the slideshow module. I spent over three hours with both Adobe and Apple tech support and we know it is a permission issue but have not been able to get it solved. It started with the last upgrade to 10.8

Back up all data.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click the following line to select it. Copy the selected text to the Clipboard (command-C):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -Rh $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
The first step should give you usable permissions in your home folder. This step will restore special attributes set by OS X on some user folders to protect them from unintended deletion or renaming. You can skip this step if you don't consider that protection to be necessary.
Boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
resetpassword
That's one word, all lower case, with no spaces. Then press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

Error when reading a RCDC (permission issue)

Hello,
I have created a MPR to grant right for a specific set (set 1) of user to read somes attributes (DisplayName) of a specific set of objects (set 2).
For you information this set contains in fact all objects of a custom type.
I have created a RCDC for viewing this object.
In a first time the XML template of this RCDC contains only a control for the DisplayName attribute.
<my:Control my:Name="DisplayName" my:TypeName="UocLabel" my:Caption="{Binding Source=schema, Path=DisplayName.DisplayName}" my:Description="{Binding Source=schema, Path=DisplayName.Description}" my:RightsLevel="{Binding Source=rights, Path=DisplayName}">
<my:Properties>
<my:Property my:Name="Text" my:Value="{Binding Source=object, Path=DisplayName, Mode=OneWay}" />
</my:Properties>
</my:Control>
When I try to read the object with a user belonging to the set 1, I meet the error below. However if I modify my MPR to grant right on all attributes, I am able to read the RCDC. This is why I think the error is related to a permission issue.
Error page on the FIM web portal:
Unable to process your request.
Please contact your help desk or system administrator.
> Go to Forefront Identity Manager home page
More information on the error in the Windows Event Viewer:
Requestor: urn:uuid:2dabeb0a-e780-447c-9f2b-6f715997f716
Microsoft.ResourceManagement.Service: Microsoft.ResourceManagement.WebServices.Exceptions.PermissionDeniedException: Exception of type 'Microsoft.ResourceManagement.WebServices.Exceptions.PermissionDeniedException' was thrown.
at Microsoft.ResourceManagement.WebServices.RequestDispatcher.ExecuteGetAction(RequestType request)
at Microsoft.ResourceManagement.WebServices.RequestDispatcher.ExecuteAction(RequestType request)
at Microsoft.ResourceManagement.WebServices.RequestDispatcher.ExecuteAction[ResponseBodyType](RequestType request)
at Microsoft.ResourceManagement.WebServices.RequestDispatcher.DispatchRequest[ResponseBodyType](RequestType request, Guid requestIdentifier, Object redispatchSingleInstanceKey, Boolean isRedispatch)
at Microsoft.ResourceManagement.WebServices.RequestDispatcher.DispatchRequest[ResponseBodyType](RequestType request)
at Microsoft.ResourceManagement.WebServices.ResourceManagementService.Get(Message request)
Does anyone have an idea of a way to solve this issue? Thank you ;)
Regards,
Serge

Finally, I found the solution. I had to add ObjectID in the list of attributes in the MPR.
If the user can't read the object id, he will not able to read the RCDC.

Permission Issue with Adobe Bridge

Hello Support,
We are an all mac environment, and we are trying to import and export templates of metadata from Adobe Bridge. The files we are accessing are on a file server on our network. When making changes to metadata using Adobe Bridge we are getting permission denied. The permissions are fine, as we can add, delete, and modify files in the same server directories using finder or other applications. This has happened in the past and the resolution was to create a a whole new profile on the local mac.The new profile then had no issues with importing and exporting metadata. However, this is now the third time we have had to create a new profile on the local mac to resolve this permission issue within Adboe Bridge. We are running Adobe Bridge CS5 version 4.0.0.5.2.9. We are wondering if there is a permanent solution to this, seeing as we do not want to have to re-create a new profile every 3-4 months. Could there be a setting in Adobe that we need to edit or anything else that would avoid us having to re-create the profile? Thanks in advance for all advice to this issue.

any help at all would be gladly appreciated. Also, is there a phone number or chat support with Adobe support that anyone can provide?

Weird file renaming permission issues

Hi!
We have a file rename permission issue. Here is the background:
We created a 2008 R2 DFS namespace called UserData with Read/write share permissions for Administrators, Everyone and System. UserData has been granted NTFS permissions as follows:
Everyone (This folder only): Traverse folder / Execute files, List folder / Read data, Read attributes, Create folders / Append data
CREATOR OWNER (Subfolders and files only): Full control
SYSTEM (This folder, subfolders and files): Full control
Domain Admins (This folder, subfolders and files)
We then enabled folder redirection for users My documents folder through GPO, setting the following:
Setting: Basic - Redirect everyones folder to the same location
Target folder: Create a folder for each user under the root path
\\domain\UserData
We also unchecked Grant the user exlusive rights to documents.
So, now to the really weird behaviour. We logged on to a Windows 7 (x64) client computer with a user who gets this GPO settings and that is not local administrator on the client. The folder is redirected as expected and we can create, delete and write to
files in anyway we want. We can also rename files if we choose an entirely different name and if we choose a longer or a shorter file name,
but we cannot rename the file to something with the same letters but different casing.
Examples of what will work:
"test" to "testing"
"test" to "cool"
"test" to "COOL"
Examples of what will NOT work:
"test" to "Test"
"test" to "tesT"
"test" to "TEST"
We the get this error: "File Access Denied. You need permission to perform this action. You require permission from S-1-5-21-220..... to make changes to this file."
Eventhough I'm pretty sure the share and NTFS permissions of the share are correctly set we have of course checked all the permissions when logged in and the user has Full NTFS control and Read/Write Share permissions.
We have encountered the same problem on a customer company as well, with a different domain with no links to our domain what so ever. I have also seen similar problems from other people when trying to find the answer on internet. Here is an example:
http://social.technet.microsoft.com/Forums/en/w7itprosecurity/thread/35ced5bb-ab13-4e28-8c48-7c68ce0b775c
Anyone have any thoughts?
/Leyan

Resent discoveries:
If I log onto a Windows 7 (x86) Enterprise I face the same Issues.
If the same user logs on to one of the DFS servers holding the namespace and accesses his folder we experience
no problems renaming files.
Customer company states that all is working fine when user logs on to a Windows XP with SP3.
/Leyan

Permission issues with CRM Business packages

Hello
I have imported CRM business packages 5.0 to EP7 Portal.
created System object SAP_CRM.connection is fine.
Assigned predefined CRM roles(Content provided by SAP)to new users.but when I click on the CRM iview,
getting following error.
Portal Runtime Error
An exception occurred while processing a request for :
iView : pcd:portal_content/com.sap.pct/specialist/com.sap.pct.crm/com.sap.pct.crm.roles/com.sap.pct.crm.accountmanager/com.sap.pct.crm.am.acc.accountmgmt/com.sap.pct.crm.am.acc.accounts/com.sap.pct.crm.acc.accounts_s
Component Name : com.sap.portal.appintegrator.sap.BSP
Exception in SAP Application Integrator occured: Cannot retrieve system object for this alias. System Alias: 'SAP_CRM', System ID: 'pcd:portal_content/com.icicipru.systems.SFA_Systems/com.icicipru.systems.SAP_CRM'. User: 'crm_user', Reason: Access denied (Object(s): portal_content/com.icicipru.systems.SFA_Systems/com.icicipru.systems.SAP_CRM).
Exception id: 06:14_10/05/07_0071_303671250
See the details for the exception ID in the log file
but when I add Super admin role to the users.it works fine.
I have addeed end user permission to EVERYONE group and theser CRM users are part of the group.Everyone group is also part of Portal Content folder and System Folder.
please help.
regards
John

Hello John,
It seems to be a permission issue. Just open the permission editor of the system and assign the everyone group to it. Select the checkbox corresponding to end-user. save it.
It will solve ur problem.
Regards
Deb
[Reward Points for helpful answers]

Permission issues accross schemas to load XMLTYPE column - structured storage

Hi,
We have a table in BIUSER schema this table is object-realtionally stored with XMLs. When we are trying to load receords from ETLUSER schema we are getting the error as
Record 1: Rejected - Error on table "BIUSER"."PWAYWORKFILE_TABLE".
ORA-00604: error occurred at recursive SQL level 1
ORA-01031: insufficient privileges
Heres the oracle installation details
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
PL/SQL Release 11.2.0.3.0 - Production
"CORE 11.2.0.3.0 Production"
All the records are moving to the bad file, whereas the same load happens normally in its own schema i.e. BIUSER
Suspecting this as permission issues we have already given the permission to the table sysnonym as given below in the registration script.
We googled and found few things about ACLs that we are not sure of , its that is the issue please let us know if this table can be created and loaded from different schema
Heres the table creation and registration script
set echo on
spool regschema.log
set define on
set timing on
set long 100000 pages 0 lines 256 trimspool on timing on
drop table PWAYWORKFILE_TABLE;
drop sequence PWAYWORKFILE_TABLE_SEQ;
begin
dbms_xmlschema.deleteschema('workfile.xsd',dbms_xmlschema.DELETE_CASCADE);
end;
begin
dbms_xmlschema.deleteschema('TotalLoss.xsd',dbms_xmlschema.DELETE_CASCADE);
end;
begin
dbms_xmlschema.deleteschema('Salvage.xsd',dbms_xmlschema.DELETE_CASCADE);
end;
begin
dbms_xmlschema.deleteschema('rate.xsd',dbms_xmlschema.DELETE_CASCADE);
end;
begin
dbms_xmlschema.deleteschema('notes.xsd',dbms_xmlschema.DELETE_CASCADE);
end;
begin
dbms_xmlschema.deleteschema('Image.xsd',dbms_xmlschema.DELETE_CASCADE);
end;
begin
dbms_xmlschema.deleteschema('Event.xsd',dbms_xmlschema.DELETE_CASCADE);
end;
begin
dbms_xmlschema.deleteschema('estimate.xsd',dbms_xmlschema.DELETE_CASCADE);
end;
begin
dbms_xmlschema.deleteschema('CoTotals.xsd',dbms_xmlschema.DELETE_CASCADE);
end;
begin
dbms_xmlschema.deleteschema('corr.xsd',dbms_xmlschema.DELETE_CASCADE);
end;
begin
dbms_xmlschema.deleteschema('Admin.xsd',dbms_xmlschema.DELETE_CASCADE);
end;
begin
dbms_xmlschema.deleteschema('Vins.xsd',dbms_xmlschema.DELETE_CASCADE);
end;
begin
dbms_xmlschema.deleteschema('commonType.xsd',dbms_xmlschema.DELETE_CASCADE);
end;
declare
V_XML_SCHEMA_NAME       VARCHAR2(700) := 'commonType.xsd';
V_XML_SCHEMA             XMLType       := xmlType(BfileName('XSD_DIR',V_XML_SCHEMA_NAME),nls_charset_id('AL32UTF8'));
V_SCHEMA_LOCATION_HINT   VARCHAR2(700) := 'commonType.xsd';
BEGIN
DBMS_XMLSCHEMA_ANNOTATE.printWarnings(FALSE);
DBMS_XMLSCHEMA_ANNOTATE.disableDefaultTableCreation(V_XML_SCHEMA);
DBMS_XMLSCHEMA_ANNOTATE.SETTIMESTAMPWITHTIMEZONE(V_XML_SCHEMA);
DBMS_XMLSCHEMA_ANNOTATE.SETTIMESTAMPWITHTIMEZONE(V_XML_SCHEMA);
DBMS_XMLSCHEMA_ANNOTATE.disableMaintainDom(V_XML_SCHEMA,FALSE);
DBMS_XMLSCHEMA.registerSchema(
    SCHEMAURL       => V_SCHEMA_LOCATION_HINT
   ,SCHEMADOC       => V_XML_SCHEMA
   ,LOCAL           => TRUE
   ,GENTYPES        => TRUE
   ,GENTABLES       => TRUE
   ,ENABLEHIERARCHY => DBMS_XMLSCHEMA.ENABLE_HIERARCHY_NONE
end;
declare
V_XML_SCHEMA_NAME       VARCHAR2(700) := 'Admin.xsd';
V_XML_SCHEMA             XMLType       := xmlType(BfileName('XSD_DIR',V_XML_SCHEMA_NAME),nls_charset_id('AL32UTF8'));
V_SCHEMA_LOCATION_HINT   VARCHAR2(700) := 'Admin.xsd';
begin
DBMS_XMLSCHEMA_ANNOTATE.printWarnings(FALSE);
DBMS_XMLSCHEMA_ANNOTATE.disableDefaultTableCreation(V_XML_SCHEMA);
DBMS_XMLSCHEMA_ANNOTATE.SETTIMESTAMPWITHTIMEZONE(V_XML_SCHEMA);
DBMS_XMLSCHEMA_ANNOTATE.disableMaintainDom(V_XML_SCHEMA,FALSE);
DBMS_XMLSCHEMA.registerSchema(
    SCHEMAURL       => V_SCHEMA_LOCATION_HINT
   ,SCHEMADOC       => V_XML_SCHEMA
   ,LOCAL           => TRUE
   ,GENTYPES        => TRUE
   ,GENTABLES       => TRUE
   ,ENABLEHIERARCHY => DBMS_XMLSCHEMA.ENABLE_HIERARCHY_NONE
end;
declare
V_XML_SCHEMA_NAME       VARCHAR2(700) := 'CoTotals.xsd';
V_XML_SCHEMA             XMLType       := xmlType(BfileName('XSD_DIR',V_XML_SCHEMA_NAME),nls_charset_id('AL32UTF8'));
V_SCHEMA_LOCATION_HINT   VARCHAR2(700) := 'CoTotals.xsd';
begin
DBMS_XMLSCHEMA_ANNOTATE.printWarnings(FALSE);
DBMS_XMLSCHEMA_ANNOTATE.disableDefaultTableCreation(V_XML_SCHEMA);
DBMS_XMLSCHEMA_ANNOTATE.SETTIMESTAMPWITHTIMEZONE(V_XML_SCHEMA);
DBMS_XMLSCHEMA_ANNOTATE.disableMaintainDom(V_XML_SCHEMA,FALSE);
DBMS_XMLSCHEMA.registerSchema(
    SCHEMAURL       => V_SCHEMA_LOCATION_HINT
   ,SCHEMADOC       => V_XML_SCHEMA
   ,LOCAL           => TRUE
   ,GENTYPES        => TRUE
   ,GENTABLES       => TRUE
   ,ENABLEHIERARCHY => DBMS_XMLSCHEMA.ENABLE_HIERARCHY_NONE
end;
declare
V_XML_SCHEMA_NAME       VARCHAR2(700) := 'Event.xsd';
V_XML_SCHEMA             XMLType       := xmlType(BfileName('XSD_DIR',V_XML_SCHEMA_NAME),nls_charset_id('AL32UTF8'));
V_SCHEMA_LOCATION_HINT   VARCHAR2(700) := 'Event.xsd';
begin
DBMS_XMLSCHEMA_ANNOTATE.printWarnings(FALSE);
DBMS_XMLSCHEMA_ANNOTATE.disableDefaultTableCreation(V_XML_SCHEMA);
DBMS_XMLSCHEMA_ANNOTATE.SETTIMESTAMPWITHTIMEZONE(V_XML_SCHEMA);
DBMS_XMLSCHEMA_ANNOTATE.disableMaintainDom(V_XML_SCHEMA,FALSE);
DBMS_XMLSCHEMA.registerSchema(
    SCHEMAURL       => V_SCHEMA_LOCATION_HINT
   ,SCHEMADOC       => V_XML_SCHEMA
   ,LOCAL           => TRUE
   ,GENTYPES        => TRUE
   ,GENTABLES       => TRUE
   ,ENABLEHIERARCHY => DBMS_XMLSCHEMA.ENABLE_HIERARCHY_NONE
end;
declare
V_XML_SCHEMA_NAME       VARCHAR2(700) := 'Image.xsd';
V_XML_SCHEMA             XMLType       := xmlType(BfileName('XSD_DIR',V_XML_SCHEMA_NAME),nls_charset_id('AL32UTF8'));
V_SCHEMA_LOCATION_HINT   VARCHAR2(700) := 'Image.xsd';
begin
DBMS_XMLSCHEMA_ANNOTATE.printWarnings(FALSE);
DBMS_XMLSCHEMA_ANNOTATE.disableDefaultTableCreation(V_XML_SCHEMA);
DBMS_XMLSCHEMA_ANNOTATE.SETTIMESTAMPWITHTIMEZONE(V_XML_SCHEMA);
DBMS_XMLSCHEMA_ANNOTATE.disableMaintainDom(V_XML_SCHEMA,FALSE);
DBMS_XMLSCHEMA.registerSchema(
    SCHEMAURL       => V_SCHEMA_LOCATION_HINT
   ,SCHEMADOC       => V_XML_SCHEMA
   ,LOCAL           => TRUE
   ,GENTYPES        => TRUE
   ,GENTABLES       => TRUE
   ,ENABLEHIERARCHY => DBMS_XMLSCHEMA.ENABLE_HIERARCHY_NONE
end;
declare
V_XML_SCHEMA_NAME       VARCHAR2(700) := 'Salvage.xsd';
V_XML_SCHEMA             XMLType       := xmlType(BfileName('XSD_DIR',V_XML_SCHEMA_NAME),nls_charset_id('AL32UTF8'));
V_SCHEMA_LOCATION_HINT   VARCHAR2(700) := 'Salvage.xsd';
begin
DBMS_XMLSCHEMA_ANNOTATE.printWarnings(FALSE);
DBMS_XMLSCHEMA_ANNOTATE.disableDefaultTableCreation(V_XML_SCHEMA);
DBMS_XMLSCHEMA_ANNOTATE.SETTIMESTAMPWITHTIMEZONE(V_XML_SCHEMA);
DBMS_XMLSCHEMA_ANNOTATE.disableMaintainDom(V_XML_SCHEMA,FALSE);
DBMS_XMLSCHEMA.registerSchema(
    SCHEMAURL       => V_SCHEMA_LOCATION_HINT
   ,SCHEMADOC       => V_XML_SCHEMA
   ,LOCAL           => TRUE
   ,GENTYPES        => TRUE
   ,GENTABLES       => TRUE
   ,ENABLEHIERARCHY => DBMS_XMLSCHEMA.ENABLE_HIERARCHY_NONE
end;
declare
V_XML_SCHEMA_NAME       VARCHAR2(700) := 'TotalLoss.xsd';
V_XML_SCHEMA             XMLType       := xmlType(BfileName('XSD_DIR',V_XML_SCHEMA_NAME),nls_charset_id('AL32UTF8'));
V_SCHEMA_LOCATION_HINT   VARCHAR2(700) := 'TotalLoss.xsd';
begin
DBMS_XMLSCHEMA_ANNOTATE.printWarnings(FALSE);
DBMS_XMLSCHEMA_ANNOTATE.disableDefaultTableCreation(V_XML_SCHEMA);
DBMS_XMLSCHEMA_ANNOTATE.SETTIMESTAMPWITHTIMEZONE(V_XML_SCHEMA);
DBMS_XMLSCHEMA_ANNOTATE.disableMaintainDom(V_XML_SCHEMA,FALSE);
DBMS_XMLSCHEMA.registerSchema(
    SCHEMAURL       => V_SCHEMA_LOCATION_HINT
   ,SCHEMADOC       => V_XML_SCHEMA
   ,LOCAL           => TRUE
   ,GENTYPES        => TRUE
   ,GENTABLES       => TRUE
   ,ENABLEHIERARCHY => DBMS_XMLSCHEMA.ENABLE_HIERARCHY_NONE
end;
declare
V_XML_SCHEMA_NAME        VARCHAR2(700) := 'Vins.xsd';
V_XML_SCHEMA             XMLType       := xmlType(BfileName('XSD_DIR',V_XML_SCHEMA_NAME),nls_charset_id('AL32UTF8'));
V_SCHEMA_LOCATION_HINT   VARCHAR2(700) := 'Vins.xsd';
begin
DBMS_XMLSCHEMA_ANNOTATE.printWarnings(FALSE);
DBMS_XMLSCHEMA_ANNOTATE.disableDefaultTableCreation(V_XML_SCHEMA);
DBMS_XMLSCHEMA_ANNOTATE.SETTIMESTAMPWITHTIMEZONE(V_XML_SCHEMA);
DBMS_XMLSCHEMA_ANNOTATE.disableMaintainDom(V_XML_SCHEMA,FALSE);
-- DOM Fidelity enabled due to presence of mixed text, substitution group heads, or repeating choice structures in complex type defintion :-
DBMS_XMLSCHEMA_ANNOTATE.enableMaintainDOM(V_XML_SCHEMA,'RefurbMgr',TRUE);
select /*+ NO_XML_QUERY_REWRITE */
         XMLQuery(
           'declare namespace xdb = "http://xmlns.oracle.com/xdb"; (:
            copy $NEWSCH := $SCHEMA modify (
                                      let $MODEL := $NEWSCH/xs:schema/xs:complexType[11]/xs:all
                                      return (
                                        replace value of node $MODEL/xs:element[2]/xs:complexType/@xdb:maintainDOM with "false",
                                        replace value of node $MODEL/xs:element[3]/xs:complexType/@xdb:maintainDOM with "false",
                                        replace value of node $MODEL/xs:element[4]/xs:complexType/@xdb:maintainDOM with "false"
             return $NEWSCH'
           passing V_XML_SCHEMA as "SCHEMA"
           returning content
    into V_XML_SCHEMA
    from dual;
DBMS_XMLSCHEMA.registerSchema(
    SCHEMAURL       => V_SCHEMA_LOCATION_HINT
   ,SCHEMADOC       => V_XML_SCHEMA
   ,LOCAL           => TRUE
   ,GENTYPES        => TRUE
   ,GENTABLES       => TRUE
   ,ENABLEHIERARCHY => DBMS_XMLSCHEMA.ENABLE_HIERARCHY_NONE
end;
declare
V_XML_SCHEMA_NAME       VARCHAR2(700) := 'corr.xsd';
V_XML_SCHEMA             XMLType       := xmlType(BfileName('XSD_DIR',V_XML_SCHEMA_NAME),nls_charset_id('AL32UTF8'));
V_SCHEMA_LOCATION_HINT   VARCHAR2(700) := 'corr.xsd';
begin
DBMS_XMLSCHEMA_ANNOTATE.printWarnings(FALSE);
DBMS_XMLSCHEMA_ANNOTATE.disableDefaultTableCreation(V_XML_SCHEMA);
DBMS_XMLSCHEMA_ANNOTATE.SETTIMESTAMPWITHTIMEZONE(V_XML_SCHEMA);
DBMS_XMLSCHEMA_ANNOTATE.disableMaintainDom(V_XML_SCHEMA,FALSE);
DBMS_XMLSCHEMA.registerSchema(
    SCHEMAURL       => V_SCHEMA_LOCATION_HINT
   ,SCHEMADOC       => V_XML_SCHEMA
   ,LOCAL           => TRUE
   ,GENTYPES        => TRUE
   ,GENTABLES       => TRUE
   ,ENABLEHIERARCHY => DBMS_XMLSCHEMA.ENABLE_HIERARCHY_NONE
end;
declare
V_XML_SCHEMA_NAME       VARCHAR2(700) := 'estimate.xsd';
V_XML_SCHEMA             XMLType       := xmlType(BfileName('XSD_DIR',V_XML_SCHEMA_NAME),nls_charset_id('AL32UTF8'));
V_SCHEMA_LOCATION_HINT   VARCHAR2(700) := 'estimate.xsd';
begin
DBMS_XMLSCHEMA_ANNOTATE.printWarnings(FALSE);
DBMS_XMLSCHEMA_ANNOTATE.disableDefaultTableCreation(V_XML_SCHEMA);
DBMS_XMLSCHEMA_ANNOTATE.SETTIMESTAMPWITHTIMEZONE(V_XML_SCHEMA);
DBMS_XMLSCHEMA_ANNOTATE.disableMaintainDom(V_XML_SCHEMA,FALSE);
DBMS_XMLSCHEMA.registerSchema(
    SCHEMAURL       => V_SCHEMA_LOCATION_HINT
   ,SCHEMADOC       => V_XML_SCHEMA
   ,LOCAL           => TRUE
   ,GENTYPES        => TRUE
   ,GENTABLES       => TRUE
   ,ENABLEHIERARCHY => DBMS_XMLSCHEMA.ENABLE_HIERARCHY_NONE
end;
declare
V_XML_SCHEMA_NAME       VARCHAR2(700) := 'notes.xsd';
V_XML_SCHEMA             XMLType       := xmlType(BfileName('XSD_DIR',V_XML_SCHEMA_NAME),nls_charset_id('AL32UTF8'));
V_SCHEMA_LOCATION_HINT   VARCHAR2(700) := 'notes.xsd';
begin
DBMS_XMLSCHEMA_ANNOTATE.printWarnings(FALSE);
DBMS_XMLSCHEMA_ANNOTATE.disableDefaultTableCreation(V_XML_SCHEMA);
DBMS_XMLSCHEMA_ANNOTATE.SETTIMESTAMPWITHTIMEZONE(V_XML_SCHEMA);
DBMS_XMLSCHEMA_ANNOTATE.disableMaintainDom(V_XML_SCHEMA,FALSE);
DBMS_XMLSCHEMA.registerSchema(
    SCHEMAURL       => V_SCHEMA_LOCATION_HINT
   ,SCHEMADOC       => V_XML_SCHEMA
   ,LOCAL           => TRUE
   ,GENTYPES        => TRUE
   ,GENTABLES       => TRUE
   ,ENABLEHIERARCHY => DBMS_XMLSCHEMA.ENABLE_HIERARCHY_NONE
end;
declare
V_XML_SCHEMA_NAME       VARCHAR2(700) := 'rate.xsd';
V_XML_SCHEMA             XMLType       := xmlType(BfileName('XSD_DIR',V_XML_SCHEMA_NAME),nls_charset_id('AL32UTF8'));
V_SCHEMA_LOCATION_HINT   VARCHAR2(700) := 'rate.xsd';
begin
DBMS_XMLSCHEMA_ANNOTATE.printWarnings(FALSE);
DBMS_XMLSCHEMA_ANNOTATE.disableDefaultTableCreation(V_XML_SCHEMA);
DBMS_XMLSCHEMA_ANNOTATE.SETTIMESTAMPWITHTIMEZONE(V_XML_SCHEMA);
DBMS_XMLSCHEMA_ANNOTATE.disableMaintainDom(V_XML_SCHEMA,FALSE);
DBMS_XMLSCHEMA.registerSchema(
    SCHEMAURL       => V_SCHEMA_LOCATION_HINT
   ,SCHEMADOC       => V_XML_SCHEMA
   ,LOCAL           => TRUE
   ,GENTYPES        => TRUE
   ,GENTABLES       => TRUE
   ,ENABLEHIERARCHY => DBMS_XMLSCHEMA.ENABLE_HIERARCHY_NONE
end;
declare
V_XML_SCHEMA_NAME       VARCHAR2(700) := 'workfile.xsd';
V_XML_SCHEMA             XMLType       := xmlType(BfileName('XSD_DIR',V_XML_SCHEMA_NAME),nls_charset_id('AL32UTF8'));
V_SCHEMA_LOCATION_HINT   VARCHAR2(700) := 'workfile.xsd';
begin
DBMS_XMLSCHEMA_ANNOTATE.printWarnings(FALSE);
DBMS_XMLSCHEMA_ANNOTATE.disableDefaultTableCreation(V_XML_SCHEMA);
DBMS_XMLSCHEMA_ANNOTATE.SETTIMESTAMPWITHTIMEZONE(V_XML_SCHEMA);
DBMS_XMLSCHEMA_ANNOTATE.disableMaintainDom(V_XML_SCHEMA,FALSE);
-- Out-of-Line mappings for 1000 Column optimization :-
DBMS_XMLSCHEMA_ANNOTATE.setOutOfLine(V_XML_SCHEMA,DBMS_XDB_CONSTANTS.XSD_COMPLEX_TYPE,'WorkfileType', 'AdminComp','ADMINCOMP_XML');
DBMS_XMLSCHEMA_ANNOTATE.setOutOfLine(V_XML_SCHEMA,DBMS_XDB_CONSTANTS.XSD_COMPLEX_TYPE,'WorkfileType', 'NotesComp','NOTESCOMP_XML');
DBMS_XMLSCHEMA_ANNOTATE.setOutOfLine(V_XML_SCHEMA,DBMS_XDB_CONSTANTS.XSD_COMPLEX_TYPE,'WorkfileType', 'SalvageComp','SALVGCOMP_XML');
DBMS_XMLSCHEMA_ANNOTATE.setOutOfLine(V_XML_SCHEMA,DBMS_XDB_CONSTANTS.XSD_COMPLEX_TYPE,'WorkfileType', 'CorrComp','CORRCOMP_XML');
DBMS_XMLSCHEMA_ANNOTATE.setOutOfLine(V_XML_SCHEMA,DBMS_XDB_CONSTANTS.XSD_COMPLEX_TYPE,'WorkfileType', 'ImageComp','IMAGECOMP_XML');
DBMS_XMLSCHEMA_ANNOTATE.setOutOfLine(V_XML_SCHEMA,DBMS_XDB_CONSTANTS.XSD_COMPLEX_TYPE,'WorkfileType', 'EventInterfaceManagerComp','EVIFCMGRCOMP_XML');
DBMS_XMLSCHEMA_ANNOTATE.setOutOfLine(V_XML_SCHEMA,DBMS_XDB_CONSTANTS.XSD_COMPLEX_TYPE,'WorkfileType', 'TotalLossComp','TOTALLOSSCOMP_XML');
DBMS_XMLSCHEMA.registerSchema(
    SCHEMAURL       => V_SCHEMA_LOCATION_HINT
   ,SCHEMADOC       => V_XML_SCHEMA
   ,LOCAL           => TRUE
   ,GENTYPES        => TRUE
   ,GENTABLES       => TRUE
   ,ENABLEHIERARCHY => DBMS_XMLSCHEMA.ENABLE_HIERARCHY_NONE
end;
-- Table creation for namespace "http://www.cccis.com/Pathways/Workfile"
set lines 80
CREATE TABLE "PWAYWORKFILE_TABLE"
      SequenceID NUMBER,
      DL_CLM_FOLDER_ID   VARCHAR2(30),
      CUST_CLM_REF_ID VARCHAR(25),
      ems_file_nm               varchar2(256),
      EST_IND         VARCHAR2(3),
      rec_dt date default sysdate,
      filesent_datetime date,
      CLM_TYP_CD               VARCHAR2(2 CHAR),
      WORKFILE XMLTYPE
XMLTYPE COLUMN WORKFILE
STORE AS OBJECT RELATIONAL
XMLSCHEMA "workfile.xsd" ELEMENT "PwayWorkfile"
create sequence PWAYWORKFILE_TABLE_SEQ
start with 1
increment by 1
nomaxvalue
create trigger PWAYWORKFILE_TABLE_TRIGGER
before insert on PWAYWORKFILE_TABLE
for each row
begin
select PWAYWORKFILE_TABLE_SEQ.nextval into :new.SequenceID from dual;
end;
desc PWAYWORKFILE_TABLE
/* create synonym */
create or replace public synonym PWAYWORKFILE_TABLE for PWAYWORKFILE_TABLE;
grant select on PWAYWORKFILE_TABLE to BIUSER_RO;
grant select, insert, update,delete on PWAYWORKFILE_TABLE to biuser_full;
exit;
Regards,
Arghyadip

Hi MarcoGralike,
I have finally acquired a sample schema and xmls to reproduce the errors that i am getting even after acquiring XDBADMIN privilege and registering my schema as GLOBAL.
Here's the problem i am facing, whenever i intend to store the PublisherList (publisher.xsd) out of line while registration i am running into insufficient privilege issues even if i have the schema registered using (LOCAL => FALSE), whereas it runs smooth in BIUSER and if i dont set it out of line it works in ETLUSER as well.
Here are the 2 XSD files
books.xsd   --- this is the root element
<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:xdb="http://xmlns.oracle.com/xdb" version="1.0" xdb:storeVarrayAsTable="true">
<xs:include schemaLocation="publisher.xsd"/>
<xs:element name="books" type="bookType"/>
<xs:complexType name="bookType" abstract="true">
    <xs:sequence>
    <xs:element name="author" type="xs:string" minOccurs="0"/>
    <xs:element name="title" type="xs:string" minOccurs="0"/>
    <xs:element name="genre" type="xs:string" minOccurs="0"/>
    <xs:element ref="PublisherList" minOccurs="0"/>
   </xs:sequence>
   </xs:complexType>
</xs:schema>
publisher.xsd -- this is a child elelment which in my actual scenario is so big that i must keep it out of line during registration
<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:xdb="http://xmlns.oracle.com/xdb" version="1.0" xdb:storeVarrayAsTable="true">
<xs:element name="PublisherList" type="PublisherListType"/>
<xs:complexType name="PublisherListType">
    <xs:sequence>
    <xs:element name="Name" type="xs:string" minOccurs="0"/>
    <xs:element name="Office" type="xs:string" minOccurs="0"/>
   </xs:sequence>
   </xs:complexType>
</xs:schema>
Here's the sample XML
<?xml version="1.0"?>
<books xmlns:xs="http://www.w3.org/2001/XMLSchema">
      <author>Writer</author>
      <title>The First Book</title>
      <genre>Fiction</genre>
      <PublisherList>
       <Name>Penguin</Name>
       <Office>London</Office>
      </PublisherList>
</books>
Here's how i am registering the Schemas in BIUSER which has XDBADMIN privilege
DROP TABLE BOOKS_TABLE;
begin
dbms_xmlschema.deleteschema('books.xsd',dbms_xmlschema.DELETE_CASCADE);
end;
begin
dbms_xmlschema.deleteschema('publisher.xsd',dbms_xmlschema.DELETE_CASCADE);
end;
declare
V_XML_SCHEMA_NAME       VARCHAR2(700) := 'publisher.xsd';
V_XML_SCHEMA             XMLType       := xmlType(BfileName('XSD_DIR',V_XML_SCHEMA_NAME),nls_charset_id('AL32UTF8'));
V_SCHEMA_LOCATION_HINT   VARCHAR2(700) := 'publisher.xsd';
begin
DBMS_XMLSCHEMA_ANNOTATE.printWarnings(FALSE);
DBMS_XMLSCHEMA_ANNOTATE.disableDefaultTableCreation(V_XML_SCHEMA);
DBMS_XMLSCHEMA_ANNOTATE.SETTIMESTAMPWITHTIMEZONE(V_XML_SCHEMA);
DBMS_XMLSCHEMA_ANNOTATE.disableMaintainDom(V_XML_SCHEMA,FALSE);
    DBMS_XMLSCHEMA.registerSchema(
    SCHEMAURL       => V_SCHEMA_LOCATION_HINT
   ,SCHEMADOC       => V_XML_SCHEMA
   ,LOCAL           => FALSE
   ,GENTYPES        => TRUE
   ,GENTABLES       => TRUE
   ,ENABLEHIERARCHY => DBMS_XMLSCHEMA.ENABLE_HIERARCHY_NONE
end;
declare
V_XML_SCHEMA_NAME       VARCHAR2(700) := 'books.xsd';
V_XML_SCHEMA             XMLType       := xmlType(BfileName('XSD_DIR',V_XML_SCHEMA_NAME),nls_charset_id('AL32UTF8'));
V_SCHEMA_LOCATION_HINT   VARCHAR2(700) := 'books.xsd';
begin
DBMS_XMLSCHEMA_ANNOTATE.printWarnings(FALSE);
DBMS_XMLSCHEMA_ANNOTATE.disableDefaultTableCreation(V_XML_SCHEMA);
DBMS_XMLSCHEMA_ANNOTATE.SETTIMESTAMPWITHTIMEZONE(V_XML_SCHEMA);
DBMS_XMLSCHEMA_ANNOTATE.disableMaintainDom(V_XML_SCHEMA,FALSE);
DBMS_XMLSCHEMA_ANNOTATE.setOutOfLine(V_XML_SCHEMA,DBMS_XDB_CONSTANTS.XSD_COMPLEX_TYPE,'bookType', 'PublisherList','PUBLISHERLIST_XML');
    DBMS_XMLSCHEMA.registerSchema(
    SCHEMAURL       => V_SCHEMA_LOCATION_HINT
   ,SCHEMADOC       => V_XML_SCHEMA
   ,LOCAL           => FALSE
   ,GENTYPES        => TRUE
   ,GENTABLES       => TRUE
   ,ENABLEHIERARCHY => DBMS_XMLSCHEMA.ENABLE_HIERARCHY_NONE
end;
CREATE TABLE BOOKS_TABLE
      BOOKS XMLTYPE
XMLTYPE COLUMN BOOKS
STORE AS OBJECT RELATIONAL
XMLSCHEMA "books.xsd" ELEMENT "books"
DROP PUBLIC SYNONYM BOOKS_TABLE;
create or replace public synonym BOOKS_TABLE for BOOKS_TABLE;
grant select, insert, update,delete on BOOKS_TABLE to ETLUSER;
Heres the ctl file that i am using
Load_Books.ctl
OPTIONS (ERRORS=100000, SILENT=(HEADER,FEEDBACK),ROWS=500, BINDSIZE=3072000 , READSIZE=3072000)
load data
infile '/apps/dev/PWXML-10/ctl/load_xml.txt'
BADFILE '/apps/dev/PWXML-10/ctl/load_xml.txt.bad'
DISCARDFILE '/apps/dev/PWXML-10/ctl/load_xml.txt.dsc'
append
into table BOOKS_TABLE
filename filler char(120),
BOOKS lobfile(filename) terminated by eof)
'/apps/dev/PWXML-10/ctl/load_xml.txt' would contain the XML file path that i gave
Heres how i am loading the XML through sqlldr in ETLUSER
sqlldr etluser/etluserpassword@MYXMLDBNAME control=Load_Books.ctl log=Load_Books.ctl.log
Here's the error i am getting
Record 1: Rejected - Error on table "BIUSER"."BOOKS_TABLE".
ORA-00604: error occurred at recursive SQL level 1
ORA-01031: insufficient privileges
Hopefully i have given you all the set up required to pin point the evil error.
Please let me know if i have missed something.

File permission issues

I cannot access any printer plug-ins by going the HD>Library>Printer>Epson>Inkjet route. All the plug-ins are grayed out so I cannot load them. I am attempting to add a printer attached to a windows machine. I followed all the instructions, I can see the correct plug-in, but I cannot load the plug-in.
The second permission issue is moving jpeg files to the DVD or to a windows machine on the network. I am the owner of the files and all the folders are marked read and write. I also have checked windows file sharing.
I have also done the repair permission route.
I am new to Macs, so this is probably a simple ix, it just does not show up in the searches I have made in the Help menu or support topics. Any help is greatly appreciated. Thank you.

Thanks for the tip, but I have tried every known fix listed anywhere and still am missing something somewhere. I can access the correct drivers when I connect the epson directly to the laptop and it will work. I can almost access the print drivers if I use IP Print when connecting to the printer across the workgroup. Almost, in that the drivers are no longer grayed-out, but if I select them, I still get generic print driver and it ignores the Epson driver. For some reason, if I try to install the driver for the printer while it is attached to a PC on the windows nworkgroup, using windows print, the print utility will not allow me to use the print driver. It has got to be something silly that I am missing.

SFTP connection issue with Dreamweaver 2014

I have a very weird SFTP connection issue with Dreamweaver CC (2014). I am on a Mac running 10.9.4 and have no problem connecting to my server through SFTP with Dreamweaver CS 6. However, using the exact same settings on CC (2014), I get the following error: "An FTP error occurred - cannot make connection to host. Your login or password is incorrect. Please check your connection information".
I am truly at a loss here. Command line connection works without problems.
Any thoughts?

Hi there,
Try after rebooting your system or in a different user account on MAC.
Is there any limit with number of login sessions with your SFTP?
Could you check with Filezila or similar FTP client and connect to your site, see if you get any error there?
Thanks.

Page Not Displaying at all Possible Permission Issue

I am working on a site, but when I upload the page and try to
view it in the browser it doesn't display. I think it may be a
permission issue due to the AC_RunActiveContent.js, but I am not
sure. Any help on this would be greatly appreciated!

bode225 wrote:
eljefe wrote:
I get a 404 Not Found error from that link, both with IE8 and Firefox. I suspect the website is down.
This doesn't seem to be a Verizon related problem to me.
its your problem!
Negative.
We do not work for Verizon. We are end users, like you.
If you want to speak to Verizon, go to http://www22.verizon.com/content/contactus/ - and
#1 Call them.
#2 Text Chat with them.
#3 Write them an e-mail.
#4 Wriite them a letter.
^^
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

Permission issue with pm-suspend

I'm running gnome and I would like to have the suspend option in the shutdown menu as a regular usar. Suspend works via pm-suspend, but its annoying to have to go through a terminal to put the laptop to sleep.
I checked the "can suspend" box in gconf editor, but I still don't have the option in gnome. I think its a permission issue, I'm just not sure how to fix it. I added the the regular user to the power group and I followed the pm-utils guide in the wiki. Has dealt and/or solved this issue?

try this:
http://bbs.archlinux.org/viewtopic.php? … 06#p458906
or install hal from testing, those values should be default now.

Permission issue with external hard drive

Hi,
I have an external hard drive that has a bunch of video and audio files on it. Any time I try to open any file from the drive, regardless of file type, the application it's supposed to open it says it can open. Most of the people I have talked to have said that it's a permission issue and have not had a solution for this. Looking for any suggestions on how to repair these permissions. Disk utility has been no help and when running recovery software like Data Rescue the files come out in the end with the same issues.
Thanks.

Drive was shot and could not rescue the information

Win 7 install permission issues

Hello,
I had the flash player crash, so iI uninstalled it now i can't reinstall due to permission issues. I have done the steps recommended in the troubleshooting, but has i run them, I see alot of failed operations in the dos window.

Dixit wrote:
hi satish,
thanks for reply, i know its not supported, but just trying to work as i have got win 7 installed and cant change it as its dual boot machine now with RHEL 5.3 installedThere's your solution ... install on the REHL side.
>
anyways but the issue is not due to compatibility i think... it might be because of privileges... i will definitlly try 11g R2, but still if u find any solution le me know.. as it is installed on OS means it can work on it as well right??
Thanks and regards
VD

AD stopped-server caused by permission-issue ... need help

Dear all, I have an AD problem after upgrading to FIM 2010 R2 SP1 and patching the product to 4.1.3599.0. Currently we cannot export to AD because we got stopped-server with following error message in EventLog:
"BAIL: MMS(10216): d:\bt\37281\private\source\miis\server\sqlstore\csobj.cpp(8254): 0x80230404 (The operation failed because the attribute cannot be found)
BAIL: MMS(10216): d:\bt\37281\private\source\miis\server\sqlstore\csobj.cpp(8254): 0x80230404 (The operation failed because the attribute cannot be found)
BAIL: MMS(10216): d:\bt\37281\private\source\miis\server\sqlstore\csobj.cpp(8254): 0x80230404 (The operation failed because the attribute cannot be found)
BAIL: MMS(10216): d:\bt\37281\private\source\miis\server\sqlstore\csobj.cpp(8254): 0x80230404 (The operation failed because the attribute cannot be found)
BAIL: MMS(10216): d:\bt\37281\private\source\miis\server\sqlstore\csobj.cpp(8254): 0x80230404 (The operation failed because the attribute cannot be found)
BAIL: MMS(10216): d:\bt\37281\private\source\miis\server\sqlstore\csobj.cpp(8254): 0x80230404 (The operation failed because the attribute cannot be found)
BAIL: MMS(10216): d:\bt\37281\private\source\miis\server\sqlstore\csobj.cpp(8254): 0x80230404 (The operation failed because the attribute cannot be found)
BAIL: MMS(10216): d:\bt\37281\private\source\miis\server\sqlstore\csobj.cpp(8254): 0x80230404 (The operation failed because the attribute cannot be found)
BAIL: MMS(10216): d:\bt\37281\private\source\miis\server\sqlstore\csobj.cpp(8254): 0x80230404 (The operation failed because the attribute cannot be found)
BAIL: MMS(10216): d:\bt\37281\private\source\miis\server\sqlstore\csobj.cpp(8254): 0x80230404 (The operation failed because the attribute cannot be found)
BAIL: MMS(10216): d:\bt\37281\private\source\miis\server\sqlstore\csobj.cpp(8254): 0x80230404 (The operation failed because the attribute cannot be found)
BAIL: MMS(10216): d:\bt\37281\private\source\miis\server\sqlstore\csobj.cpp(8254): 0x80230404 (The operation failed because the attribute cannot be found)
BAIL: MMS(10216): d:\bt\37281\private\source\miis\server\sqlstore\csobj.cpp(8254): 0x80230404 (The operation failed because the attribute cannot be found)
BAIL: MMS(10216): d:\bt\37281\private\source\miis\server\sqlstore\csobj.cpp(8254): 0x80230404 (The operation failed because the attribute cannot be found)
BAIL: MMS(10216): d:\bt\37281\private\source\miis\shared\entry\tower.cpp(3989): 0x80004005 (Unspecified error)
BAIL: MMS(10216): d:\bt\37281\private\source\miis\shared\entry\tower.cpp(12133): 0x80004005 (Unspecified error)
BAIL: MMS(10216): d:\bt\37281\private\source\miis\server\sqlstore\csobj.cpp(1833): 0x80004005 (Unspecified error)
BAIL: MMS(10216): d:\bt\37281\private\source\miis\server\sync\expcall.cpp(905): 0x80004005 (Unspecified error)
ERR_: MMS(10216): d:\bt\37281\private\source\miis\server\sync\expbase.cpp(2957): PutAnchorWithDnInternal failed on CS object {249C6AC4-5DCB-4A7C-8AC8-D7F3CF7C437C} with 0x80004005 (pass 1 of 5)
Forefront Identity Manager 4.1.3599.0"
The second error found in EventLog directly after the first one is:
The management agent controller encountered an unexpected error.
"BAIL: MMS(8628): d:\bt\37281\private\source\miis\cntrler\cntrler.cpp(10408): 0x8007007a (The data area passed to a system call is too small.)
BAIL: MMS(8628): d:\bt\37281\private\source\miis\cntrler\cntrler.cpp(5032): 0x8007007a (The data area passed to a system call is too small.)
BAIL: MMS(8628): d:\bt\37281\private\source\miis\cntrler\cntrler.cpp(3722): 0x8007007a (The data area passed to a system call is too small.)
ERR_: MMS(8628): d:\bt\37281\private\source\miis\shared\utils\libutils.cpp(10613): Unusual error code reported 0x8007007a
Forefront Identity Manager 4.1.3599.0"
After searching in the FIM DB we have found the mentioned object_id and this is a group. There is permission issue, so the error message.
But the user have all permissions in AD, so it could not be the problem.
After DIDS and one more Export there is no more stopped-server and the error message is now "dn-attributes-failure".
It is also very strange, that we cannot see import updates by doing FI!
We also found that the problem occurs when adding/removing user in an AD security group(add or remove member in the group object).
Does anybody had same/similar problems and knows any solution?
Thanks a lot!
Kind regards
Stoyan

Seen this issue with my step up.
Was done in any other environment ? like test ? or this is test ?
For me , test was fine but issues were in prod and AD was major impact. so comparing all Dlls versions (should be updated to latest).
Found that on prod some of the DLL were not updated to latest FIM version. Replace them with test or install source resolved the issue.
AdiKumar

Permission Issues. Slow Computer. Disk Utility Not working.

Hey. So my Macbook (Mac OS X v10.6.8. Snow) is running slow. It also freezes from time to time & the internet is slower than it used to be. Ive been on other laptops in my house and they all have fast internet as usual so its not my provider. And my computer is having a hard time with apps it never used to stuggle with. Now Im sure this is somehow all my fault as I do change my icons and such but I don't really go hopping around the system files screwing with stuff too much. I have changed a few things in System/Library/CoreServices/ to satisfy my customizing needs but other than that I don't muck up stuff that much I hope. Also I recently changed my user name ( im the admin) but it doesnt match my home name anymore... idk what that is
     Everytime I open Disky Utility and click verify Permissions.. around 54 "Permissions differ on 'such and such', should be blah blah, they are blah blah" pop up. And about 5 of Users or Group differs on "such and such" Should be 0, is 501 pop up. Someone mentioned I might have issues with ACLs. I have very little knowledge about them so..... anyway. So I hit Repair Permissions and it says it repairs all fifty some. Then I either hit verify again or after a restart or a few days later and the same silly Permission issues pop up. Same. Exact. Ones. Even if these permission issues have nothing to do with what I have said is wrong Id still like to try and fix them. Anyone know what is going on or what I can do?? Please and thank you in advance
I won't paste them all because it would be very long Here are a few examples.
Repairing permissions for “Kenna”
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/A/Headers/AWTCocoaComponen t.h", should be -rw-r--r-- , they are lrw-r--r-- .
Repaired "System/Library/Frameworks/JavaVM.framework/Versions/A/Headers/AWTCocoaComponen t.h".
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/A/Headers/JDWP.h", should be -rw-r--r-- , they are lrw-r--r-- .
Repaired "System/Library/Frameworks/JavaVM.framework/Versions/A/Headers/JDWP.h".
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/A/Headers/JDWPCommands.h", should be -rw-r--r-- , they are lrw-r--r-- .
Repaired "System/Library/Frameworks/JavaVM.framework/Versions/A/Headers/JDWPCommands.h".
User differs on "Applications/Safari.app/Contents/Resources/compass.icns", should be 0, user is 501.
Group differs on "Applications/Safari.app/Contents/Resources/compass.icns", should be 0, group is 20.
Permissions differ on "Applications/Safari.app/Contents/Resources/compass.icns", should be -rw-r--r-- , they are -r--r--r-- .
Repaired "Applications/Safari.app/Contents/Resources/compass.icns".
Permissions differ on "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Rem ote Desktop Message.app/Contents/Resources/Italian.lproj/UIAgent.nib", should be drwxr-xr-x , they are -rwxr-xr-x .
Repaired "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Rem ote Desktop Message.app/Contents/Resources/Italian.lproj/UIAgent.nib".
Permissions differ on "System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreen.app/Contents/Resources/ko.lproj/MainMenu.nib", should be drwxr-xr-x , they are -rwxr-xr-x .
Repaired "System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreen.app/Contents/Resources/ko.lproj/MainMenu.nib".
Permissions differ on "System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/Dutch.lproj/RemoteDesktopMenu.nib" , should be drwxr-xr-x , they are -rwxr-xr-x .
Repaired "System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/Dutch.lproj/RemoteDesktopMenu.nib" .
Now these CoreService files i did edit
User differs on "System/Library/CoreServices/loginwindow.app/Contents/Resources/MacOSXServer.ti f", should be 0, user is 501.
Group differs on "System/Library/CoreServices/loginwindow.app/Contents/Resources/MacOSXServer.ti f", should be 0, group is 20.
Repaired "System/Library/CoreServices/loginwindow.app/Contents/Resources/MacOSXServer.ti f".
User differs on "System/Library/CoreServices/DefaultDesktop.jpg", should be 0, user is 501.
Group differs on "System/Library/CoreServices/DefaultDesktop.jpg", should be 0, group is 20.
Repaired "System/Library/CoreServices/DefaultDesktop.jpg".

I am not going to Lion. Ive been told I cant customize as much with it so thats not an issue
This what you mean?
Capacity : 249.72 GB
Available : 117.65 GB (117,652,971,520 Bytes)
Used : 132.06 GB (132,062,404,608 Bytes)
Sorry lol i feel silly idk what ram is...
this?
Processor   2.4 GHz Intel Core 2 Duo
Memory      2 Gb 667 MHz DDR2 SDRAM
I know how to backup .. but format and install? New at all this Sry

SFTP- permission issue

Similar Messages

Maybe you are looking for