SFTP Receiver adapter error Message could not be forwarded to the JCA adapter

Hi Experts,
I'm needing help to solve a problem with an SFTP Receiver interface.
Before I was sending in the adapter configuration as "Direct" in Write Modus (File .txt) and now I changed to "Use temporary file" is occurring this error:
Message
could not be forwarded to the JCA adapter. Reason: 2: Moving
/ABCftp/To_XXX/140187613515701OUT_20140604-100214-622.TXT.tmp to /ABCftp/To_XXX/01OUT_20140604-100214-622.TXT failed.
Files as TXT they are being written to the SFTP however when as TMP returns this error ... would not rule SFTP server to accept different TXT files?
I also changed the namespace to "http://sap.com/xi/XI/System/SFTP" and "http://sap.com/xi/XI/System/File" but is not working.
Any help will be welcome!
tks.

Hi Durga and Naveen...
I believe the problem is when the application's legacy system picks up the file because the log file got the "tmp", ie, was not formed yet ...
I changed to a directory without the intervention of the legacy application and it worked.
I'm waiting for the opportunity to modify the legacy system to capture only files with the extension TXT.
Tks All for help!

Similar Messages

SFTP Receiver channel error :Message could not be forwarded to the JCA adapter.

Hello Guys,
I have different SFTP Receiver channels running in production from long time. Suddenly, they have started giving the same kind of error as below:
Any suggestion where to look for the solution to this issue.
Thank you!
Regards,
Simran

Hi,
Did you try connecting to the SFTP server using filezilla? May be something might have changed on the FTP server.
You can use the xpi inspector to get additional information.

Message could not be forwarded to the JCA adapter

Dear all,
I am facing the issue:
i am trying to send files to sftp server via SFTP adapter but in the receiver channel I am getting this error:
Message could not be forwarded to the JCA adapter. Reason: 3: Putting /folder1/folder2/10124__20140603-152747-700.txt failed.
exception caught with cause javax.resource.ResourceException: 3: Putting /folder1/folder2/10124__20140603-152747-700.txt failed.
Adapter Framework caught exception: 3: Putting /folder1/folder2/10124__20140603-152747-700.txt failed.
Delivering the message to the application using connection SFTP_http://sap.com/xi/XI/SFTP failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: javax.resource.ResourceException: 3: Putting /folder1/folder2/10124__20140603-152747-700.txt failed..
I am not able to keep the files in folder2.
there is no problem in access rights.
I am able to access the same from Putti but from channel i m unable to do so.
Please help.

Hi Sinha,
Thank you for the response, I might not have written the issue correctly.
Remove Spaces in EDI Files
Please refer the above blog, we are facing a simmilar issue, when we remove those spaces the file works correctly. But when the files are transmitted we have a single stream of characters and there is a space after the IEA segment and the next ISA Segment.
Regards,
Pranay

Message could not be forwarded to the JCA adapter. Reason: String index out of range: 0

Hi,
We are using the B2B Adapter to convert EDI to XML in PI, during this process we are getting the below error, can you please suggest, what might be the issue.
Thank you in Advance!!

Hi Sinha,
Thank you for the response, I might not have written the issue correctly.
Remove Spaces in EDI Files
Please refer the above blog, we are facing a simmilar issue, when we remove those spaces the file works correctly. But when the files are transmitted we have a single stream of characters and there is a space after the IEA segment and the next ISA Segment.
Regards,
Pranay

I can't start CS6 I get this error message "Could not initialize Photoshop because the preferences file was invalid (it has been deleted)." What do I do now??

When I try to start CS6 I get this error message "Could not initialize Photoshop because the preferences file was invalid (it has been deleted)." What do I do now??

Please refer:
FAQ: How do I reset my preferences?
Regards,
Ashutosh

Error Message - Could not be moved to the mailbox "(null)"

The archive button in macmail will not let me archive an email using one of my IMAP accounts, making me think I accidentally deleted an Archive folder during setup. I get the following error message. The message [subject] could not be moved to the mailbox "(null)". The destination mailbox does not exist.
Each of my email accounts have an archive folder, except for my work account (Tecsg) which has a circle icon instead of the Archive box icon.
Any tips on how to fix this?

So this worked for me...
I found the answer here.
Close Mail
Go to /Users/<username>/Library/Mail/V2/MailData/
Edit Accounts.plist
Make a backup of the file just in case
Find the following key-string pair under the account that you are having trouble with:
<key>ArchiveMailboxName</key>
<string></string>
Change the <string> tag value to your desired archive folder name, e.g. Archive
Save the file
Reopen Mail
The Archive folder will now apear with the rest of your archive folders in the navigation area.
You can also add an archive button to the toolbar.

When I try to listen to a song I purchased last week, I get the message, "could not be used because the original file could not be found. would you like to locate it?" What do I do to find it?

When I try to listen to the songs I purchased from iTunes last week, I get the error message, "could not be used because the original file could not be found. would you like to locate it?" What do I do to fix this problem or locate the song?
Thanks!

I am getting this same message. I recently bought a new Macbook Pro and the geeks transferred my files from my mini-mac. Perhaps they did not transfer something critical? I follow the "locate" option when it asks to find my files and I get a file folder that has a red circle with a white bar in the middle.
I have the same issues with my downloaded movies but my apps all seem to be fine.
Even more confusing - it seems to allow random songs to play and download on my Macbook and other devices. But most of my music - whether downloaded from iTunes or my CD collection comes up with that message about the original file.
Should I get new geeks to locate these files on my old mini-mac?

Error "codepage could not be determined for the receiver-system"

Hi,
we use the idoc-adapter to send message from mySAP ERP to PI.
All worked fine.
So, this morning I have changed the datatype of the messageId from "char" to "int" in mySAP ERP in the customizing menue (install param). So, no message received in SAP PI.
When I start transction "we05" in mySAPERP" I get the following error:
"codepage could not be determined for the receiver-system" status 02.
I have changed the datatyp to "char" but the same probleme
Can anybody help me please?
Regards
Stefan

This error shouldn't occur unless there is some modification at the OS level codepages.
Please check the entried in the RFC destination for connecting to the XI system. Unicode settings.
Regards,
Prateek

When trying to install Itunes 10.2 I get an error message "Could not access network location %APPDATA%\." How can I fix this?

When trying to install Itunes 10.2 I get an error message "Could not access network location %APPDATA%\." How can I fix this?

With that particular variety of 1606 (it's a 1606 error message even though the 1606 error message number isn't returned by the iTunes installer), the following Microsoft document is worth a try:
You receive an "Error 1606" error message when you try to install or remove a Microsoft program

I continue to recieve the error message "Could not create key: Verify that you have sufficient access to that key" when I am try to down Akamai NetSession Interface that's needed to download the adobe photoshop elements 13 software that I purchased.

I continue to receive the error message "Could not create key: Verify that you have sufficient access to that key" when I am try to down Akamai NetSession Interface that's needed to download the adobe Photoshop elements 13 software that I purchased.

cancel the akamai download and download files 1 of 2 and 2 of 2 directly. put both in the same directory and double click the exe to start installation.
Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5.5, 5
Contribute: CS5 | CS4, CS3
FrameMaker: 12, 11, 10, 9, 8, 7.2
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

When I try to save a photo, I get error message Could not complete your request because of a program error. What's wrong?

I edit a photo and when I click Save As, I get error message "Could not complete your request because of a program error." I exit Elements, try again, same error.
In past I had this problem but it resolved when rebooted PC. This time, PC reboot does not help.
I cannot save anything i do in elements!!
What's wrong? Any suggestions how to fix this? Anyone know what the program error is

Please mention your PSE version and underlying OS.
Also, it would be of great help in resolving the issue if you can upload a snapshot of error message.
Regards
Kishan

Saving a Photoshop CC project from a Mac (in .PSD format) to a thumb drive and trying to transfer it to a Dell laptop with Photoshop CS6. Will not open...Error message: could not complete your request because it is not a valid photoshop document.

Saving a Photoshop CC project from a Mac (in .PSD format) to a thumb drive and trying to transfer it to a Dell laptop with Photoshop CS6. Will not open...Error message: could not complete your request because it is not a valid photoshop document.

The file was corrupted somewhere along the way (assuming it was still readable on the Macintosh).
The platforms don't matter, but you still need file transfer that doesn't corrupt files...

I'm running iCloud on a Windows 7 PC. Photoes have been autmatically uploaded from my iPhone. However, the "Photoes" ICON does not load, and I receive an error message of a problem. Then the ICON disappears. How can I access my photoes?

I'm running iCloud on a Windows 7 PC. Photoes have been autmatically uploaded from my iPhone. However, the "Photoes" ICON does not load, and I receive an error message of a problem. Then the ICON disappears. How can I access my photoes?

Same issue here, previously did work perfectly

HT201328 after unlocking from ATT and resetting iphone 3gs I keep getting the same error message "could not activate phone" neither Apple Store Tech or ATT were able to fix this . Any ideas?? TKS Sandro

after unlocking over the phone from ATT and resetting iphone 3gs I keep getting the same error message "could not activate phone" neither Apple Store Tech or ATT were able to fix this .
Itunes displays a message saying "there is no SIM installed in the phone you're trying to activate" even if there is the same SIM that was working minutes before.
The SIM works on a different phone I tested it.
Any ideas?? TKS Sandro

“Could Not Activate EDGE” error message Update ...
Well it’s going on day 6 and still sporadic to no EDGE on my iPhone. At one time, it was thought to be a defective iPhone – since my partner’s iPhone works just fine.
After over three hours on the land line with AT&T and Apple, I was sent to the local Apple store for a replacement. Of course, as soon as I walked into the Apple store my iPhone worked just fine. ;-( The local store replaced my iPhone and suggested I go home and activate the phone as a NEW iPhone, that way if there was a bug in my data it would not carry over to the new phone. Did that and well… still sporadic to no EDGE. By the way, I have the Big White “E” to the right of the 5 bars and AT&T .
AT&T said last week they has “Software” issues in my area, but the CSR I talked to did not know what the issues were or if they were the cause of my problems. He did say they would call me back today to see how my iPhone was doing, but alas, no call back.
When I’m next to my partner, trying to access the same feature, his iPhone is just so fast. Mine hangs up, draws out and finally I get the error message, “Could Not Activate EDGE”. I am updated to version “1.1.4(4A102)”. New (refurbished) iPhone direct from Apple.
I remember reading a while back about some problems others had when they upgraded to from 1.1.3 to 1.1.4. I never had those problems, but it sure looks like they may have started. Does anyone remember what the problems with 1.1.4 were, what was done if anything to correct them, and best of all any suggestions?
By the way, this is Seattle, not some small – out of the way place where connection and signal strength is expected to be second rate. Also, I had full function of my iPhone from the day I bought it in June 2007, all the way up to Thursday March 20, at 2120.
Thanks
Joe

How to solve the error message "Could not activate cellular data network: PDP authentication failure"when using 3g or gPRS on safari with an iphone 4 and latest software updates

Please can someone help me to solve the error message "Could not activate cellular data network: PDP authentication failure"when using 3G or GPRS on safari with an iphone 4GS and latest software updates. I have tried resetting the network and phone settings. I have restored the factory settings on itunes and still the problem persists.

All iPhones sold in Japan are sold carrier locked and cannot be officially unlocked by the carrier. If you unlocked it, it was by unauthorized means (hacked), and support cannot be given to you in this forum.
Hacked iPhones are subject to countermeasures by Apple, particularly when updating the firmware. It is likely permanently re-locked or permanently disabled.
Message was edited by: modular747

SFTP Receiver adapter error Message could not be forwarded to the JCA adapter

Similar Messages

Maybe you are looking for