SFTP with OS Command

Hello everyone,
Our scenarios are
IDOC > XI > FTP over SSH
and
FTP over SSH > XI > IDOC
Since XI 3.0 does not support sftp (ftp over ssh) i am trying to find a way to go round this problem by dumping a file on the xi server using a receier NFS file adapter and then executing an os command that will ssh it to it the target.
Has anyone out there ever tried this before? Has it worked?
How would one go about handling the sender file adapter in order to bring in files?
Thanks in advance
Dimitris

Hi,
Has anyone out there ever tried this before? Has it worked?
>>>Yes, it worked successfully.
There are 2 approaches here.
1) Execute the shell script from the XI, via OS command. Here there may be a chances of the Queue problems, message stuck etc if huge no. of files are tranferred. Because, if script is not executed successfully, then SXMB_MONI will not show the status success. This condition will happen rarely based on the file transactions.
--- Also , advatage is , XI is able to monitor, give the audit information saying the sript has been executed or not etc. To monitor
2) Second approach is , execute the shell script independently from the OS level , independent of XI. Ie. these scripts will run in the batch job in the OS level and it will transfer the files from the directory into required destination.
In this case, XI is not responsible to execute the shells script.
But monitoring of these shell script should be out of XI's scope.
Hope this helps,
Regards,
Moorthy

Similar Messages

Using secure FTP (SFTP) with XI 3.0.

Hi,
I must bring a document with SFTP protocol.
Is it possible use SFTP with XI 3.0. What must I do use SFTP with XI. Is it necessary to install some component to XI or it needs some 3hrd party components?
Thanks

Hi Cemil,
Right now, XI does not have the feature of communicating with SFTP. You can extend the functionality of the File Adapter by writing some adapter modules to enable it to communicate with SFTP.
Regards,
Hari.

Action with Move command fails after illustrator restarts

Make new illustrator file
Make a Rectangle
Make a new action
While recording action press enter, and move any direction
Stop recording
Run action again to test
Close Illustrator
Open Illustrator
Try and use action
Fails and gives error "The object 'Move' is not currently available, the action button turns orange.
It also fails in button mode
It fails if I try to reload the actions
It only works if I recreate them in that session illustrator is open.
Expected Behavior
Actions work no matter how many times you restart illustrator

Sorry about not being very clear originally. We don't actually send remote notices to the target machines via ARD. The command
osascript -e 'tell application "System Events" to display dialog "Message"'
is just an example of what ARD is having issues with for me: If the script for the target machine pushes any user-facing GUI at all, it will not quit until someone manually OKs or closes the window... no amount of messing with the command by giving it ampersands or starting subshells prevents ARD from minding every single one of the subprocesses that it has started.
There are posts here where we see that a certain task never even "ends" in ARD's eyes: the scripted reboot
A colleague has suggested that we update our application to echo command information instead of triggering an "Everything was OK" dialog. Most of the time this will fail because you do not have access to the source code in the real world. In my case, we do, but making the changes requires reviewing, changing the code and new testing for the triggered application.
Still, there is a flaw in not having an option for ARD to just hit-and-run with a script to, say, open a presentation in 100 computers and leave it running. Currently, ARD will hit a few and hang on "Running" as soon as its whatever maximum parallel workstations is stuck running this script.
ARD designers seem to have planned it "we must receive the return value of this open-ended script," while clients see it as "please let us treat the job as finished as soon as the last line has been triggered"

Error while trying to remove an object with dsrm command

hello,
i get an error while trying to delete an object computer with the command line tool, DSRM. i get this view:
actually, it's a one of hundreds of commands, that help cleaning the active directory of the obsolete objects. it is saying : "Access Denied" (in french, accès refusé). i say that the account used to execute this command, is a member of domain
admins group, and enterprise admins group too. so i cannot believe it's a mater of some missing rights... :/
thanks in advance, for your help,
regards
Lotfi BOUCHERIT

Hi,
I was able to reproduce your issue when using a non-elevated command prompt in a 2008R2 box. So please try to elevate your command prompt and your command will most likely go through.
In addition to above, I'd suggest you look in to PowerShell instead, which in most cases is more effective.(and doesn't need to run in an elevated prompt to make AD-Changes)
The same as above could be done with the powershell cmdlet Remove-AdComputer.
Remove-AdComputer -Identity "Distinguishedname"
Hope this helps you!
Microsoft Certified Trainer
MCSE: Desktop, Server, Private Cloud, Messaging
Blog: http://365lab.net

How to export data with column headers in sql server 2008 with bcp command?

Hi all,
I want know "how to export data with column headers in sql server 2008 with bcp command", I know how to import data with import and export wizard. when i
am trying to import data with bcp command data has been copied but column names are not came.
I am using the below query:-
EXEC master..xp_cmdshell
'BCP "SELECT * FROM   [tempdb].[dbo].[VBAS_ErrorLog] " QUERYOUT "D:\Temp\SQLServer.log" -c -t , -T -S SERVER-A'
Thanks,
SAAD.

Hi All,
I have done as per your suggestion but here i have face the below problem, in print statment it give correct query, in EXEC ( EXEC master..xp_cmdshell @BCPCMD) it was displayed error message like below
DECLARE @BCPCMD
nvarchar(4000)
DECLARE @BCPCMD1
nvarchar(4000)
DECLARE @BCPCMD2
nvarchar(4000)
DECLARE @SQLEXPRESS
varchar(50)
DECLARE @filepath
nvarchar(150),@SQLServer
varchar(50)
SET @filepath
= N'"D:\Temp\LDH_SQLErrorlog_'+CAST(YEAR(GETDATE())
as varchar(4))
+RIGHT('00'+CAST(MONTH(GETDATE())
as varchar(2)),2)
+RIGHT('00'+CAST(DAY(GETDATE())
as varchar(2)),2)+'.log" '
Set @SQLServer
=(SELECT
@@SERVERNAME)
SELECT @BCPCMD1
= '''BCP "SELECT
* FROM   [tempdb].[dbo].[wErrorLog] " QUERYOUT '
SELECT @BCPCMD2
= '-c -t , -T -S '
+ @SQLServer +
SET @BCPCMD
= @BCPCMD1+ @filepath
+ @BCPCMD2
Print @BCPCMD
-- Print out below
'BCP "SELECT
* FROM   [tempdb].[dbo].[wErrorLog] " QUERYOUT "D:\Temp\LDH_SQLErrorlog_20130313.log" -c -t , -T -S servername'
EXEC
master..xp_cmdshell
@BCPCMD
''BCP' is not recognized as an internal or external command,
operable program or batch file.
NULL
if i copy the print ourt put like below and excecute the CMD it was working fine, could you please suggest me what is the problem in above query.
EXEC
master..xp_cmdshell
'BCP "SELECT * FROM
[tempdb].[dbo].[wErrorLog] " QUERYOUT "D:\Temp\LDH_SQLErrorlog_20130313.log" -c -t , -T -S servername '
Thanks, SAAD.

Report with two Command is empty if one of the two commands returns no data

Hi all,
I have a report with two Commands not linked together.
If ONLY one of the two Commands returns no data, the full report is empty (although the other Command returns data).
I'm using Crystal Report 2008 and the CRJ 12.2.205
Have an idea?

Hi Ted,
how can I solve the problem, please? It is important.
If I can help yourself, the problem is appeared in many reports since I updated the library (the old library version 11.8.4.1094 works fine with all). I'm waiting for your answer, please.
Thank you very much.

Print to two printers with one command?

Is there a way to print the same document to two printers with one command? I'd like to have every document I print automatically saved as a PDF at the same time.
Thanks,
Mark.
MacBook Pro (and 5 others) Mac OS X (10.4.9)

That would be a good use of the PDF Services available in OS X. You can use PDF Services with AppleScript or an Automator workflow.
Matt
Mac Mini G4; B&W G3/300

How can you run a command with elevated rights on a remote server with invoke-command ?

I am trying to run a script on a remote server with invoke-command. The script is starting and is running fine, but the problem is that it should be running with elevated rights on the remote server. On the server where I start the invoke-command, my account has the necessary rights.
The server were I launch the invoke-command is a W2K8 R2. The remote box is a W2K3 with powershell v2.0 installed.
When I launch the script on the remote-box from the command line, I don't get the access denied's.
Is there a way to do this ?
Thanks in advance

The script that I want to run is to install the windows updates. I get an access denied on the download of the updates.
When I execute the script on an W2K8 box, (not remotely) and I run it with non-elevated rights, I get the same error.
The script is running fine when it is launched on W2K3 box locally with a domain account that has local admin rights, or on a W2K8 R2 server with a domain account that has local admin rights, but with elevated rights.
Thanks in advance for your help.
#=== start script ====
param($installOption="TESTINSTALL",$rebootOption="NOREBOOT")
Function Show-Help
Write-Host ""
Write-Host "SCRIPT: $scriptName <installOption> <RebootOption>"
Write-Host ""
Write-Host "DESCRIPTION: Installatie van WSUS updates op de lokale server"
Write-Host ""
Write-Host "PARAMETERS"
Write-Host " -installOption <[INSTALL|TESTINSTALL]>"
Write-Host " -rebootOption <[REBOOT|NOREBOOT|REBOOT_IF_UPDATED]>"
Write-Host ""
Write-Host "EXAMPLE:"
Write-Host "$ScriptName -installOption INSTALL -rebootOption REBOOT_IF_UPDATED"
Write-Host "$ScriptNAme INSTALL NOREBOOT"
Write-Host ""
Write-Host "Indien beide parameter weggelaten worden zijn de defaultwaarden :"
Write-Host " installOption=TESTINSTALL "
Write-Host " RebootOption=NOREBOOT"
Write-Host ""
Exit
#Include alle globale variablen
$CEIF_WIN_PATH = (get-content env:CEIF_WIN_PATH)
$includeFile=$CEIF_WIN_PATH + "\Scripts\include_win.ps1"
. $includeFile
#initialiseer error count
$errcnt=0
$scriptName=$MyInvocation.MyCommand.Name
#argumenten controleren
$arrInstallOption= "TESTINSTALL", "INSTALL" # Mandatory variable with predefined values
If (!($arrInstallOption –contains $installOption)){ Show-Help }
$arrRebootOption = "REBOOT", "NOREBOOT","REBOOT_IF_UPDATED" # Mandatory variable with predefined values
If (!($arrRebootOption –contains $rebootOption)){ Show-Help }
#Logfile opbouwen
$logfile = get-logfileName($MyInvocation.MyCommand.Name)
Log-scriptStart $MyInvocation.MyCommand.Name $logfile
function Get-WIAStatusValue($value)
switch -exact ($value)
0 {"NotStarted"}
1 {"InProgress"}
2 {"Succeeded"}
3 {"SucceededWithErrors"}
4 {"Failed"}
5 {"Aborted"}
function boot-server()
if ($installOption -eq "TESTINSTALL")
logger "TESTINSTALL : - Reboot local Server" $logfile
else
logger " - Reboot local Server" $logfile
$thisServer = gwmi win32_operatingsystem
$thisServer.psbase.Scope.Options.EnablePrivileges = $true
$thisServer.Reboot()
$logmsg="Install option = " + $installOption + ", RebootOption = $rebootOption"
logger "$logmsg" $logfile
logger "" $logfile
logger " - Creating WU COM object" $logfile
$UpdateSession = New-Object -ComObject Microsoft.Update.Session
$UpdateSearcher = $UpdateSession.CreateUpdateSearcher()
logger " - Searching for Updates" $logfile
$SearchResult = $UpdateSearcher.Search("IsAssigned=1 and IsHidden=0 and IsInstalled=0")
logger " - Found [$($SearchResult.Updates.count)] Updates to Download and install" $logfile
$Updates=$($SearchResult.Updates.count)
logger "" $logfile
foreach($Update in $SearchResult.Updates)
if ($Update.EulaAccepted -eq 0)
$Update.AcceptEula()
# Add Update to Collection
$UpdatesCollection = New-Object -ComObject Microsoft.Update.UpdateColl
$UpdatesCollection.Add($Update) | out-null
if ($installOption -eq "TESTINSTALL")
else
# Download
logger " + Downloading Update $($Update.Title)" $logfile
$UpdatesDownloader = $UpdateSession.CreateUpdateDownloader()
$UpdatesDownloader.Updates = $UpdatesCollection
$DownloadResult = $UpdatesDownloader.Download()
$Message = " - Download {0}" -f (Get-WIAStatusValue $DownloadResult.ResultCode)
if ($DownloadResult.ResultCode -eq 4 )
{ $errcnt = 1 }
logger $message $logfile
# Install
logger " - Installing Update" $logfile
$UpdatesInstaller = $UpdateSession.CreateUpdateInstaller()
$UpdatesInstaller.Updates = $UpdatesCollection
$InstallResult = $UpdatesInstaller.Install()
$Message = " - Install {0}" -f (Get-WIAStatusValue $InstallResult.ResultCode)
if ($InstallResult.ResultCode -eq 4 )
{ $errcnt = 1 }
logger $message $logfile
logger "" $logfile
#Indien er een fout gebeurde tijdens download/installatie -> stuur mail naar windowsteam
if ( $errcnt -gt 0 )
logger " - Fout tijdens de uitvoering van script -> send mail" $logfile
$mailSubject=$MyInvocation.MyCommand.Name
$msg = new-object Net.Mail.MailMessage
$att = new-object Net.Mail.Attachment($logfile)
$smtp = new-object Net.Mail.SmtpClient($smtpServer)
$msg.From = $mailFrom
$msg.To.Add($mailTo)
$msg.Subject = $mailSubject
$msg.Body = “Meer details in attachement”
$msg.Attachments.Add($att)
$smtp.Send($msg)
#Moet de server herstart worden ?
if ($rebootOption -eq "REBOOT_IF_UPDATED" )
if ($Updates -gt 0)
#Reboot the server when updates are installed
boot-server
elseif ($rebootOption -eq "REBOOT")
#reboot the server always
boot-server
else
#Do not reboot the server
logger "Do not reboot the server" $logfile
Log-scriptEnd $MyInvocation.MyCommand.Name $logfile
exit 0

How to run others applications with abap commands

Is there a mothed that can use it to run an application with abap statement?
for example: how to open a text file in program with abap command?
thank you very much.

CALL FUNCTION 'WS_EXECUTE'
EXPORTING
DOCUMENT = ' '
CD = ' '
 COMMANDLINE = ''
INFORM = ' '
 PROGRAM = 'NOTEPAD'
STAT = ' '
WINID = ' '
OSMAC_SCRIPT = ' '
OSMAC_CREATOR = ' '
WIN16_EXT = ' '
EXEC_RC = ' '
IMPORTING
RBUFF =
EXCEPTIONS
FRONTEND_ERROR = 1
NO_BATCH = 2
PROG_NOT_FOUND = 3
ILLEGAL_OPTION = 4
GUI_REFUSE_EXECUTE = 5
OTHERS = 6
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Here...
In the CommandLine you can give the path where the file is located like for Example
C:\Test\Hello.txt.
In the Program you need to give the application that you want to open that file.
if helpful reward points...
Regards,
Vivekananda Varma Dandu

Problem with Updating clients with UNIX command

Hi.
Until this day, I used to update all our 50 client macs by manually logging in as administrator via ARD and choosing Software Update from the apple menu, this works always and I use our own servers SUS so the downloading is really fast. Still, this clearly is time consuming and annoying when you have this many clients. I have now done some search and I know I could do this by sending unix command to clients using ARD. First I had problems with running the command, then I noticed I need to run this as root. Then it "works".
Works, not quite. It starts to run, and I can see all the output. I have tried this with few clients and the results are confusing. The following is an output from one client I send the command "softwareupdate -i -r"
SIBELIUS411 (172.17.6.36)
2011-03-25 13:13:20.610 softwareupdate[1692:392b] PackageKit: * Missing bundle identifier: /Library/Receipts/PPDInstallerRI3222E3L.pkg
2011-03-25 13:14:09.636 softwareupdate[1692:392b] PackageKit: Missing bundle path, skipping: <bundle id="com.apple.NetworkUtility"></bundle>
2011-03-25 13:14:09.798 softwareupdate[1692:392b] PackageKit: Missing bundle path, skipping: <bundle id="com.apple.remoteinstallmacosx"></bundle>
2011-03-25 13:14:09.801 softwareupdate[1692:392b] PackageKit: Missing bundle path, skipping: <bundle id="com.apple.server.SystemImageUtility"></bundle>
2011-03-25 13:19:40.016 softwareupdate[1692:903] PackageKit: * Missing bundle identifier: /Library/Receipts/PPDInstallerRI3222E3L.pkg
Software Update Tool
Copyright 2002-2009 Apple
Downloading Safari
Verifying Safari
Waiting to install Safari
Downloading Mac OS X Update Combined
Verifying Mac OS X Update Combined
Waiting to install Mac OS X Update Combined
Downloading Ricoh Printer Software Update
Verifying Ricoh Printer Software Update
Waiting to install Ricoh Printer Software Update
Downloading iWeb Update
Verifying iWeb Update
Waiting to install iWeb Update
Downloading Java for Mac OS X 10.6 Update 4
Verifying Java for Mac OS X 10.6 Update 4
Waiting to install Java for Mac OS X 10.6 Update 4
Downloading iTunes
Verifying iTunes
Waiting to install iTunes
Downloading Remote Desktop Client Update x signature
x RemoteDesktopClient.pkg.tar
x RemoteDesktopClient.pkg
x RemoteDesktopClient.pkg/Contents
x RemoteDesktopClient.pkg/Contents/Archive.bom
x RemoteDesktopClient.pkg/Contents/Archive.pax.gz
x RemoteDesktopClient.pkg/Contents/Info.plist
x RemoteDesktopClient.pkg/Contents/._RemoteDesktopClient.dist
x RemoteDesktopClient.pkg/Contents/RemoteDesktopClient.dist
x RemoteDesktopClient.pkg/Contents/Resources
x RemoteDesktopClient.pkg/Contents/Resources/background.tif
x RemoteDesktopClient.pkg/Contents/Resources/BundleVersions.plist
x RemoteDesktopClient.pkg/Contents/Resources/cleanup_list
x RemoteDesktopClient.pkg/Contents/Resources/da.lproj
x RemoteDesktopClient.pkg/Contents/Resources/da.lproj/Description.plist
x RemoteDesktopClient.pkg/Contents/Resources/da.lproj/InstallationCheck.strings
x RemoteDesktopClient.pkg/Contents/Resources/da.lproj/License.rtf
x RemoteDesktopClient.pkg/Contents/Resources/da.lproj/Localizable.strings
x RemoteDesktopClient.pkg/Contents/Resources/da.lproj/PantherSU.xml
x RemoteDesktopClient.pkg/Contents/Resources/da.lproj/ReadMe.rtf
x RemoteDesktopClient.pkg/Contents/Resources/da.lproj/SUDescription.html
x RemoteDesktopClient.pkg/Contents/Resources/da.lproj/Welcome.rtfd
x RemoteDesktopClient.pkg/Contents/Resources/da.lproj/Welcome.rtfd/icons.png
x RemoteDesktopClient.pkg/Contents/Resources/da.lproj/Welcome.rtfd/TXT.rtf
x RemoteDesktopClient.pkg/Contents/Resources/deleteomatic
x RemoteDesktopClient.pkg/Contents/Resources/Dutch.lproj
x RemoteDesktopClient.pkg/Contents/Resources/Dutch.lproj/Description.plist
x RemoteDesktopClient.pkg/Contents/Resources/Dutch.lproj/InstallationCheck.string s
x RemoteDesktopClient.pkg/Contents/Resources/Dutch.lproj/License.rtf
x RemoteDesktopClient.pkg/Contents/Resources/Dutch.lproj/Localizable.strings
x RemoteDesktopClient.pkg/Contents/Resources/Dutch.lproj/PantherSU.xml
x RemoteDesktopClient.pkg/Contents/Resources/Dutch.lproj/ReadMe.rtf
x RemoteDesktopClient.pkg/Contents/Resources/Dutch.lproj/SUDescription.html
x RemoteDesktopClient.pkg/Contents/Resources/Dutch.lproj/Welcome.rtfd
x RemoteDesktopClient.pkg/Contents/Resources/Dutch.lproj/Welcome.rtfd/icons.png
x RemoteDesktopClient.pkg/Contents/Resources/Dutch.lproj/Welcome.rtfd/TXT.rtf
x RemoteDesktopClient.pkg/Contents/Resources/English.lproj
x RemoteDesktopClient.pkg/Contents/Resources/English.lproj/Description.plist
x RemoteDesktopClient.pkg/Contents/Resources/English.lproj/InstallationCheck.stri ngs
x RemoteDesktopClient.pkg/Contents/Resources/English.lproj/License.rtf
x RemoteDesktopClient.pkg/Contents/Resources/English.lproj/Localizable.strings
x RemoteDesktopClient.pkg/Contents/Resources/English.lproj/PantherSU.xml
x RemoteDesktopClient.pkg/Contents/Resources/English.lproj/ReadMe.rtf
x RemoteDesktopClient.pkg/Contents/Resources/English.lproj/SUDescription.html
x RemoteDesktopClient.pkg/Contents/Resources/English.lproj/Welcome.rtfd
x RemoteDesktopClient.pkg/Contents/Resources/English.lproj/Welcome.rtfd/icons.png
x RemoteDesktopClient.pkg/Contents/Resources/English.lproj/Welcome.rtfd/TXT.rtf
x RemoteDesktopClient.pkg/Contents/Resources/fi.lproj
x RemoteDesktopClient.pkg/Contents/Resources/fi.lproj/Description.plist
x RemoteDesktopClient.pkg/Contents/Resources/fi.lproj/InstallationCheck.strings
x RemoteDesktopClient.pkg/Contents/Resources/fi.lproj/License.rtf
x RemoteDesktopClient.pkg/Contents/Resources/fi.lproj/Localizable.strings
x RemoteDesktopClient.pkg/Contents/Resources/fi.lproj/PantherSU.xml
x RemoteDesktopClient.pkg/Contents/Resources/fi.lproj/ReadMe.rtf
x RemoteDesktopClient.pkg/Contents/Resources/fi.lproj/SUDescription.html
x RemoteDesktopClient.pkg/Contents/Resources/fi.lproj/Welcome.rtfd
x RemoteDesktopClient.pkg/Contents/Resources/fi.lproj/Welcome.rtfd/icons.png
x RemoteDesktopClient.pkg/Contents/Resources/fi.lproj/Welcome.rtfd/TXT.rtf
x RemoteDesktopClient.pkg/Contents/Resources/French.lproj
x RemoteDesktopClient.pkg/Contents/Resources/French.lproj/Description.plist
x RemoteDesktopClient.pkg/Contents/Resources/French.lproj/InstallationCheck.strin gs
x RemoteDesktopClient.pkg/Contents/Resources/French.lproj/License.rtf
x RemoteDesktopClient.pkg/Contents/Resources/French.lproj/Localizable.strings
x RemoteDesktopClient.pkg/Contents/Resources/French.lproj/PantherSU.xml
x RemoteDesktopClient.pkg/Contents/Resources/French.lproj/ReadMe.rtf
x RemoteDesktopClient.pkg/Contents/Resources/French.lproj/SUDescription.html
x RemoteDesktopClient.pkg/Contents/Resources/French.lproj/Welcome.rtfd
x RemoteDesktopClient.pkg/Contents/Resources/French.lproj/Welcome.rtfd/icons.png
x RemoteDesktopClient.pkg/Contents/Resources/French.lproj/Welcome.rtfd/TXT.rtf
x RemoteDesktopClient.pkg/Contents/Resources/German.lproj
x RemoteDesktopClient.pkg/Contents/Resources/German.lproj/Description.plist
x RemoteDesktopClient.pkg/Contents/Resources/German.lproj/InstallationCheck.strin gs
x RemoteDesktopClient.pkg/Contents/Resources/German.lproj/License.rtf
x RemoteDesktopClient.pkg/Contents/Resources/German.lproj/Localizable.strings
x RemoteDesktopClient.pkg/Contents/Resources/German.lproj/PantherSU.xml
x RemoteDesktopClient.pkg/Contents/Resources/German.lproj/ReadMe.rtf
x RemoteDesktopClient.pkg/Contents/Resources/German.lproj/SUDescription.html
x RemoteDesktopClient.pkg/Contents/Resources/German.lproj/Welcome.rtfd
x RemoteDesktopClient.pkg/Contents/Resources/German.lproj/Welcome.rtfd/icons.png
x RemoteDesktopClient.pkg/Contents/Resources/German.lproj/Welcome.rtfd/TXT.rtf
x RemoteDesktopClient.pkg/Contents/Resources/Hints.plist
x RemoteDesktopClient.pkg/Contents/Resources/InstallationCheck
x RemoteDesktopClient.pkg/Contents/Resources/Italian.lproj
x RemoteDesktopClient.pkg/Contents/Resources/Italian.lproj/Description.plist
x RemoteDesktopClient.pkg/Contents/Resources/Italian.lproj/InstallationCheck.stri ngs
x RemoteDesktopClient.pkg/Contents/Resources/Italian.lproj/License.rtf
x RemoteDesktopClient.pkg/Contents/Resources/Italian.lproj/Localizable.strings
x RemoteDesktopClient.pkg/Contents/Resources/Italian.lproj/PantherSU.xml
x RemoteDesktopClient.pkg/Contents/Resources/Italian.lproj/ReadMe.rtf
x RemoteDesktopClient.pkg/Contents/Resources/Italian.lproj/SUDescription.html
x RemoteDesktopClient.pkg/Contents/Resources/Italian.lproj/Welcome.rtfd
x RemoteDesktopClient.pkg/Contents/Resources/Italian.lproj/Welcome.rtfd/icons.png
x RemoteDesktopClient.pkg/Contents/Resources/Italian.lproj/Welcome.rtfd/TXT.rtf
x RemoteDesktopClient.pkg/Contents/Resources/Japanese.lproj
x RemoteDesktopClient.pkg/Contents/Resources/Japanese.lproj/Description.plist
x RemoteDesktopClient.pkg/Contents/Resources/Japanese.lproj/InstallationCheck.str ings
x RemoteDesktopClient.pkg/Contents/Resources/Japanese.lproj/License.rtf
x RemoteDesktopClient.pkg/Contents/Resources/Japanese.lproj/Localizable.strings
x RemoteDesktopClient.pkg/Contents/Resources/Japanese.lproj/PantherSU.xml
x RemoteDesktopClient.pkg/Contents/Resources/Japanese.lproj/ReadMe.rtf
x RemoteDesktopClient.pkg/Contents/Resources/Japanese.lproj/SUDescription.html
x RemoteDesktopClient.pkg/Contents/Resources/Japanese.lproj/Welcome.rtfd
x RemoteDesktopClient.pkg/Contents/Resources/Japanese.lproj/Welcome.rtfd/icons.pn g
x RemoteDesktopClient.pkg/Contents/Resources/Japanese.lproj/Welcome.rtfd/TXT.rtf
x RemoteDesktopClient.pkg/Contents/Resources/kickstart
x RemoteDesktopClient.pkg/Contents/Resources/ko.lproj
x RemoteDesktopClient.pkg/Contents/Resources/ko.lproj/Description.plist
x RemoteDesktopClient.pkg/Contents/Resources/ko.lproj/InstallationCheck.strings
x RemoteDesktopClient.pkg/Contents/Resources/ko.lproj/License.rtf
x RemoteDesktopClient.pkg/Contents/Resources/ko.lproj/Localizable.strings
x RemoteDesktopClient.pkg/Contents/Resources/ko.lproj/PantherSU.xml
x RemoteDesktopClient.pkg/Contents/Resources/ko.lproj/ReadMe.rtf
x RemoteDesktopClient.pkg/Contents/Resources/ko.lproj/SUDescription.html
x RemoteDesktopClient.pkg/Contents/Resources/ko.lproj/Welcome.rtfd
x RemoteDesktopClient.pkg/Contents/Resources/ko.lproj/Welcome.rtfd/icons.png
x RemoteDesktopClient.pkg/Contents/Resources/ko.lproj/Welcome.rtfd/TXT.rtf
x RemoteDesktopClient.pkg/Contents/Resources/makeuser
x RemoteDesktopClient.pkg/Contents/Resources/no.lproj
x RemoteDesktopClient.pkg/Contents/Resources/no.lproj/Description.plist
x RemoteDesktopClient.pkg/Contents/Resources/no.lproj/InstallationCheck.strings
x RemoteDesktopClient.pkg/Contents/Resources/no.lproj/License.rtf
x RemoteDesktopClient.pkg/Contents/Resources/no.lproj/Localizable.strings
x RemoteDesktopClient.pkg/Contents/Resources/no.lproj/PantherSU.xml
x RemoteDesktopClient.pkg/Contents/Resources/no.lproj/ReadMe.rtf
x RemoteDesktopClient.pkg/Contents/Resources/no.lproj/SUDescription.html
x RemoteDesktopClient.pkg/Contents/Resources/no.lproj/Welcome.rtfd
x RemoteDesktopClient.pkg/Contents/Resources/no.lproj/Welcome.rtfd/icons.png
x RemoteDesktopClient.pkg/Contents/Resources/no.lproj/Welcome.rtfd/TXT.rtf
x RemoteDesktopClient.pkg/Contents/Resources/package_version
x RemoteDesktopClient.pkg/Contents/Resources/PlistBuddy
x RemoteDesktopClient.pkg/Contents/Resources/postflight
x RemoteDesktopClient.pkg/Contents/Resources/postflight_actions
x RemoteDesktopClient.pkg/Contents/Resources/postflight_actions/cleanStartup.pl
x RemoteDesktopClient.pkg/Contents/Resources/postflight_actions/copypackages
x RemoteDesktopClient.pkg/Contents/Resources/postflight_actions/deleteObsoleteFil es
x RemoteDesktopClient.pkg/Contents/Resources/postflight_actions/learnFiles
x RemoteDesktopClient.pkg/Contents/Resources/postflight_actions/postflightKicksta rt
x RemoteDesktopClient.pkg/Contents/Resources/postflight_actions/setupLaunchFiles
x RemoteDesktopClient.pkg/Contents/Resources/postflightactions/setupLaunchFilesRFBEventHelper
x RemoteDesktopClient.pkg/Contents/Resources/postflight_actions/setupMenuExtras
x RemoteDesktopClient.pkg/Contents/Resources/postflight_actions/stampBuildNumInPl istStrings
x RemoteDesktopClient.pkg/Contents/Resources/postflight_kickstart
x RemoteDesktopClient.pkg/Contents/Resources/postflightkickstartentries
x RemoteDesktopClient.pkg/Contents/Resources/postflightmakeuserentries
x RemoteDesktopClient.pkg/Contents/Resources/preflight
x RemoteDesktopClient.pkg/Contents/Resources/preflight_actions
x RemoteDesktopClient.pkg/Contents/Resources/preflight_actions/cleanAndPreflightK ickstart
x RemoteDesktopClient.pkg/Contents/Resources/preflight_actions/maybeNukeVNCServer
x RemoteDesktopClient.pkg/Contents/Resources/preflight_actions/moveAsideFirewallD efaultPrefsTiger
x RemoteDesktopClient.pkg/Contents/Resources/preflight_kickstart
x RemoteDesktopClient.pkg/Contents/Resources/preflightkickstartentries
x RemoteDesktopClient.pkg/Contents/Resources/pt.lproj
x RemoteDesktopClient.pkg/Contents/Resources/pt.lproj/Description.plist
x RemoteDesktopClient.pkg/Contents/Resources/pt.lproj/InstallationCheck.strings
x RemoteDesktopClient.pkg/Contents/Resources/pt.lproj/License.rtf
x RemoteDesktopClient.pkg/Contents/Resources/pt.lproj/Localizable.strings
x RemoteDesktopClient.pkg/Contents/Resources/pt.lproj/PantherSU.xml
x RemoteDesktopClient.pkg/Contents/Resources/pt.lproj/ReadMe.rtf
x RemoteDesktopClient.pkg/Contents/Resources/pt.lproj/SUDescription.html
x RemoteDesktopClient.pkg/Contents/Resources/pt.lproj/Welcome.rtfd
x RemoteDesktopClient.pkg/Contents/Resources/pt.lproj/Welcome.rtfd/icons.png
x RemoteDesktopClient.pkg/Contents/Resources/pt.lproj/Welcome.rtfd/TXT.rtf
x RemoteDesktopClient.pkg/Contents/Resources/Spanish.lproj
x RemoteDesktopClient.pkg/Contents/Resources/Spanish.lproj/Description.plist
x RemoteDesktopClient.pkg/Contents/Resources/Spanish.lproj/InstallationCheck.stri ngs
x RemoteDesktopClient.pkg/Contents/Resources/Spanish.lproj/License.rtf
x RemoteDesktopClient.pkg/Contents/Resources/Spanish.lproj/Localizable.strings
x RemoteDesktopClient.pkg/Contents/Resources/Spanish.lproj/PantherSU.xml
x RemoteDesktopClient.pkg/Contents/Resources/Spanish.lproj/ReadMe.rtf
x RemoteDesktopClient.pkg/Contents/Resources/Spanish.lproj/SUDescription.html
x RemoteDesktopClient.pkg/Contents/Resources/Spanish.lproj/Welcome.rtfd
x RemoteDesktopClient.pkg/Contents/Resources/Spanish.lproj/Welcome.rtfd/icons.png
x RemoteDesktopClient.pkg/Contents/Resources/Spanish.lproj/Welcome.rtfd/TXT.rtf
x RemoteDesktopClient.pkg/Contents/Resources/sv.lproj
x RemoteDesktopClient.pkg/Contents/Resources/sv.lproj/Description.plist
x RemoteDesktopClient.pkg/Contents/Resources/sv.lproj/InstallationCheck.strings
x RemoteDesktopClient.pkg/Contents/Resources/sv.lproj/License.rtf
x RemoteDesktopClient.pkg/Contents/Resources/sv.lproj/Localizable.strings
x RemoteDesktopClient.pkg/Contents/Resources/sv.lproj/PantherSU.xml
x RemoteDesktopClient.pkg/Contents/Resources/sv.lproj/ReadMe.rtf
x RemoteDesktopClient.pkg/Contents/Resources/sv.lproj/SUDescription.html
x RemoteDesktopClient.pkg/Contents/Resources/sv.lproj/Welcome.rtfd
x RemoteDesktopClient.pkg/Contents/Resources/sv.lproj/Welcome.rtfd/icons.png
x RemoteDesktopClient.pkg/Contents/Resources/sv.lproj/Welcome.rtfd/TXT.rtf
x RemoteDesktopClient.pkg/Contents/Resources/zh_CN.lproj
x RemoteDesktopClient.pkg/Contents/Resources/zh_CN.lproj/Description.plist
x RemoteDesktopClient.pkg/Contents/Resources/zh_CN.lproj/InstallationCheck.string s
x RemoteDesktopClient.pkg/Contents/Resources/zh_CN.lproj/License.rtf
x RemoteDesktopClient.pkg/Contents/Resources/zh_CN.lproj/Localizable.strings
x RemoteDesktopClient.pkg/Contents/Resources/zh_CN.lproj/PantherSU.xml
x RemoteDesktopClient.pkg/Contents/Resources/zh_CN.lproj/ReadMe.rtf
x RemoteDesktopClient.pkg/Contents/Resources/zh_CN.lproj/SUDescription.html
x RemoteDesktopClient.pkg/Contents/Resources/zh_CN.lproj/Welcome.rtfd
x RemoteDesktopClient.pkg/Contents/Resources/zh_CN.lproj/Welcome.rtfd/icons.png
x RemoteDesktopClient.pkg/Contents/Resources/zh_CN.lproj/Welcome.rtfd/TXT.rtf
x RemoteDesktopClient.pkg/Contents/Resources/zh_TW.lproj
x RemoteDesktopClient.pkg/Contents/Resources/zh_TW.lproj/Description.plist
x RemoteDesktopClient.pkg/Contents/Resources/zh_TW.lproj/InstallationCheck.string s
x RemoteDesktopClient.pkg/Contents/Resources/zh_TW.lproj/License.rtf
x RemoteDesktopClient.pkg/Contents/Resources/zh_TW.lproj/Localizable.strings
x RemoteDesktopClient.pkg/Contents/Resources/zh_TW.lproj/PantherSU.xml
x RemoteDesktopClient.pkg/Contents/Resources/zh_TW.lproj/ReadMe.rtf
x RemoteDesktopClient.pkg/Contents/Resources/zh_TW.lproj/SUDescription.html
x RemoteDesktopClient.pkg/Contents/Resources/zh_TW.lproj/Welcome.rtfd
x RemoteDesktopClient.pkg/Contents/Resources/zh_TW.lproj/Welcome.rtfd/icons.png
x RemoteDesktopClient.pkg/Contents/Resources/zh_TW.lproj/Welcome.rtfd/TXT.rtf
x RemoteDesktopClient.pkg/Contents/version.plist
Verifying Remote Desktop Client Update
Waiting to install Remote Desktop Client Update
Checking packages…
Installing
Waiting for other installations to complete…2011-03-25 13:20:01.468 softwareupdate[1692:37b7] PackageKit: Missing bundle path, skipping: <bundle id="com.apple.remoteinstallmacosx"></bundle>
2011-03-25 13:20:01.471 softwareupdate[1692:37b7] PackageKit: Missing bundle path, skipping: <bundle id="com.apple.server.SystemImageUtility"></bundle>
2011-03-25 13:20:01.540 softwareupdate[1692:37b7] PackageKit: Missing bundle path, skipping: <bundle id="com.apple.NetworkUtility"></bundle>
2011-03-25 13:20:01.731 softwareupdate[1692:37b7] PackageKit: Missing bundle path, skipping: <bundle id="com.apple.remoteinstallmacosx"></bundle>
2011-03-25 13:20:01.734 softwareupdate[1692:37b7] PackageKit: Missing bundle path, skipping: <bundle id="com.apple.server.SystemImageUtility"></bundle>
2011-03-25 13:20:01.808 softwareupdate[1692:37b7] PackageKit: Missing bundle path, skipping: <bundle id="com.apple.NetworkUtility"></bundle>
Validating packages…
Writing files…
Running package scripts…
Removing old files…
Optimizing system for installed software…
Moving items into place…
Registering updated components…
And thats it, it stops there. Few clients completed the task, but the output says that they skipped the installation of all updates. In the case above, there is some skipping too, and I don't know what it means. Yesterday I left one client to this part where its Registering updated components.... , and today when I came in, it's still there, and the task is still running. When I update the clients with the Software Update from apple menu, it takes usually 10 minutes max to complete the whole process, download and install. After I restarted the same client and ran the manual Software Update from apple menu, it shows the same updates, it didn't do anything???
Am I doing something wrong with the command?

I am having the same issue. I send the unix command to some test clients to install all updates. The process never finishes and stays at "Registering updated companents....". (See screen shot)
I have manually restarted some of the clients after waiting a very long time. All updates seem to have been installed. I am wondering why the task hangs at this point. I want to be able to ran ASU with this Unix method on the 450+ macs that I manage at work, but it scares me that the task never seems to finish.

Acrobat won't open pdfs on clicking file icon and won't quit with key command

Acrobat won't open pdfs on clicking the file icon and won't quit with key command.

IF you command I on any .pdf file, what does open with show?
Restore the Acrobat preferences files (Mac OS)
Restore the Acrobat preferences files to eliminate problems caused by a damaged preferences file.
Note: Re-creating the Acrobat preferences files restores settings to their defaults.
Quit Acrobat.
Drag the following files from the Users/[Username]/Library/Preferences folder to the Desktop:
Acrobat WebCapture Cookies
com.adobe.Acrobat.Pro.plist or com.adobe.Acrobat.Pro_x86_9.0.plist
Acrobat Distiller Prefs and com.adobe.Acrobat.Pro.plist (if you are troubleshooting an issue with Distiller)
The Acrobat folder, which contains preferences for forms (MRUFormsList), collaboration (OfflineDocs), and color settings (AcrobatColor Settings.csf)
Restart Acrobat

How to get the MAC address of the additional 10G NIC with ILO command line

how to get the MAC address of the additional 10G NIC with ILO command line?
thanks.
This question was solved.
View Solution.

Hi Bruce,
Out from what I can find on this network card is it not possible to get the mac address without a OS. I would recommend you to get/burn a Linux/Ubuntu live CD/DVD and run a Ifconfig in there.
Hope it helps you.
Best regards
Zincas
I work on behalf of HP

Can anyone help with Double Command issues. This a specific keyboard question and they do not seem to know.

Before I go into a lengthy explanation of the problem: Can anyone help with Double Command issues. This a specific keyboard question and they do not seem to know.
Thanks much.
Emile

Choose Force Quit from the Apple menu and close Mail from there.
(103661)

Problem true/false with the command SHOW_LOV

Hello,
I have a simple problem with the command SHOW_LOL
When i press an Button with this trigger:
LIST_OF_VALUES('hallo','OKI');
And my Procedire like this:
PROCEDURE list_of_values(p_lov in VARCHAR2, p_text in VARCHAR2) IS
v_lov BOOLEAN;
BEGIN
v_lov := SHOW_LOV(p_lov);
IF v_lov THEN
MESSAGE('You have just selected a '||p_text);
ELSE
MESSAGE('You have just cancelled the List of Values');
END IF;
END;
When ever i pressed the button, the procedure jumps into the else sector, but why?
Because it is true, or not?
When i alter the variable like this:
v_lov := true;
then it runs.
Can you help me?
Greetings

example of help forms 6i.
DECLARE
a_value_chosen BOOLEAN;
BEGIN
a_value_chosen := Show_Lov('my_employee_status_lov');
IF NOT a_value_chosen THEN
Message('You have not selected a value.');
Bell;
RAISE Form_Trigger_Failure;
END IF;
END;

How to configure File Adapter along with OS command option

Hello,
I want to configure a scenario using File Adapter with OS command option.
How to use that option in channel configuration of File Adapter.
What is the default path where it is actually runs this OS command?
Thanks,
Soorya

>
surya venkat wrote:
> Hello,
> I want to configure a scenario using File Adapter with OS command option.
> How to use that option in channel configuration of File Adapter.
There are two ways to use the Os command in the file adapter.
Lets talk about the sender File Adapter.
First: Run operative system Before Message Processing
Whenever any operation needs to be performed uppon the source file Just before XI picks it up.
e.g. Calculate any hash code, backup the file to a given location, create a log at os level, etc...
... After Message Processing
After Xi has processed the message, you can trigger a new os level command:
e.g. Trigger a mail, check if the archiving was successful, etc.
> What is the default path where it is actually runs this OS command?
>
Theres no default path, you assign the desired path in the Comm Channel configuration.
> Thanks,
> Soorya
I hope it helps.

SFTP with OS Command

Similar Messages

Maybe you are looking for