SFW5: business function set not selectable
I would like to activate PSCD.
However, even in change mode, I could not select public sector business function set to activate.
The system only display Contract AR + AP in one tab, and Enterprise Add-on on another tab.
Giang
Hi Truong Giang,
Try the following steps to activate PSCD and see whether it works out or not. I believe that you are using ECC 6.0 because till ECC 5.0 this SFW5 TCOde is not available.
1. Execute the TCode - SFW5
2. Select the Menu path Environment -> Business Function
3. Under Business Function Column select either PSCD / PSCD_GRANTOR / PSCD_SETTINGS / PSCD_TRM according to your requirement
4. Select Activate present on the Application toolbar or Press Ctrl+F3 or follow the menu path Business Function -> Activate
Hope this solves your problem. Reward accordingly.
Thanks and Regards,
Maddineni Bharath.
Similar Messages
-
SFW5 in IDES: business function set not selectable
I intended to activate some IS solution using SFW5. My system is IDES 6.0 SR2 and client is 800.
However, inside SFW5, I could not select other business function set to activate like in other production system.
Please tell me why and how to do.
GiangHi Giang
IDES solution for ERP 6.0 is preactivated is FI-CAX component and you cannot activate any other IS functionality if FI-CAX is activated. Please refer SAP note 1013391 for ERP 6.0 SR2.
If you want a particular IS to be activated, SAP has release IDES for specific IS solutions. Following IDES solutions are avialable as of now:
IDES DI/MILL PRODUCTS 2009
IDES EA-DFPS 6.03
IDES IS-CWM 6.03
IDES IS-PS-CA 600
IDES OIL-600
IDES RETAIL-600
IDES SAP AFS 6.0
IDES SEM-BW 6.0/7.00
Check if it does have your required component. Hope this helps you.
Regards
Rahul -
Business Function Set: Enterprise AddOns in Solution Manager
Hello
For testing purposes I want to activate the Enterprise AddOn EA_PLM in transaction SFW5 inside a Solution Manager 4 installation but no Enterprise AddOn is available. Additionally there is only one Business Function Set called "telco reference pack" with two Business Functions. Do I have to set up something before I can active the Enterprise AddOns? I thought PLM is part of the Solution Manager 4 installation.Hello Marc,
the Solution Manager consists "only" of an CRM-component, the SolMan component itself and the Netweaver 2004s platform. So no PLM (and no Enterprise AddOn) is available. SolMan coves some functionalities of Software Lifecycle Management, but does not include the PLM coding itself. For EA_PLM you need an ERP system.
Best regards, Alexander -
Can some one tell where to find or any document, what functionalities are offered under each business fucntion set ..like DIMP_SDUD.
Hi ,
Following link may help you
http://help.sap.com/saphelp_nw70/helpdata/EN/de/899442047b0831e10000000a1550b0/content.htm
Rahul. -
What is business function switch?
Hi,
Can anyone tell me what business function switches are? And also how they are to be checked in the
program (as to whether a business function is switched on or not)? Thanks.
Regards,
SuhasHi,
Here are the links which give wealthy info on Enhancement Frame Work(SWITCH).
/people/thomas.weiss/blog/2006/01/24/what-the-new-enhancement-framework-is-for-150-its-basic-structure-and-elements-for-beginners
/people/thomas.weiss/blog/2006/03/15/the-new-enhancement-framework-part-2--what-else-you-need-to-know-before-building-an-enhancement
/people/thomas.weiss/blog/2006/04/03/how-to-define-a-new-badi-within-the-enhancement-framework--part-3-of-the-series
/people/thomas.weiss/blog/2006/04/18/how-to-implement-a-badi-and-how-to-use-a-filter--part-4-of-the-series-on-the-new-enhancement-framework
/people/thomas.weiss/blog/2006/05/03/source-code-enhancements--part-5-of-the-series-on-the-new-enhancement-framework
/people/thomas.weiss/blog/2007/12/12/the-three-use-cases-of-the-enhancement-and-switch-framework--part-1
/people/thomas.weiss/blog/2008/01/07/the-three-use-cases-of-the-enhancement-and-switch-framework--part-2
/people/thomas.weiss/blog/2008/01/14/the-three-use-cases-of-the-enhancement-and-switch-framework--part-3
/people/thomas.weiss/blog/2008/01/23/the-three-use-cases-of-the-enhancement-and-switch-framework--part-4-the-many-ways-to-enhance-a-sap-application-with-the-new-framework
/people/thomas.weiss/blog/2008/02/04/the-three-use-cases-of-the-enhancement-and-switch-framework--part-5-the-basics-about-switching
Creating Switch.
1. in SFW1, Once you create your SWITCH and assign your package and Activate it, it shows in Active mode but the SWITCH is not still Active GLOBALLY.
2. To activate it, create a Bussiness Function in SFW2 and assign your SWITCH to this and Activate it.
2.1 Here if you select the Business Function as type ' INDUSTRY ', then again you need to assign this Business Function to Business Function Set in SFW3.
2.1.1 In SFW3, Create a Business Funstion Set, and assign this Business Function to it and Activate it. But your SWICT is still it not active Globally.
2.1.2 Go to SFW5, and Activate your Business Function Set here, then your SWICT is GLOBALLY ACTIVE
2.2 If your Business Function is of type ' Add On ', then there is no need to assign it to any Business Function Set.
2.2.1 Directly, go to SFW5, click on type ' Add Ons ', and after identifing your Business Function, Activate your Business Function here, then your SWITCH is GLOBALLY ACTIVE.
But the final problem is : Once you activate your SWITCH, there is no other way to deactivate your SWICTH.
Enhancement implementations are switchable.
Steps to assign a switch to BADI Implementation:
1) Assign the Enhancement Implementation containing the BADI implementation to a Package/development class.
2)Assign this Package/development class to a switch in transaction SFW1.
3)Make sure the switch you are using has state ON. For this assign this switch to an ACTIVE business function using transaction SFW2. A switch inherits the state of the business function.
Reward Points if answer is useful.
Regards,
Raj. -
Estimating Activation Time of Business Functions in EhP3
Can anyone estimate how long the activation of c.100 Business Functions plus one industry business function set (ECC-DIMP) ought to take when the transport is imported into a new system? This is in ERP 6 with EhP3.
I know some BFs will activate faster than others, but on average? In our QA system this has taken c.12 hours.
Based on Thomas Weiss' weblog series (great stuff there) I understand that (1) all the activated code is compiling for the first time, and (2) all the DDIC table appends are taking place.
So I wonder also if the size of the tables (# records) affect the run-time of the background job SFW_ACTIVATE_SF0X.
P.S. We are on Basis 70018, and may need to investigate SAP Note 1278120 (available in 70019) to get improved logging. I've also seen the answer by Ralf regarding SAP Note 1276225 to fix a bug in 70018 that reactivates business functions (this was in [Terry's thread|SFW5 repeating already activated BF] ) .You may be try the R3trans parallel option from note
Note 1127194 - R3trans import with parallel processes
I have no in-depth knowledge on how the switch framework does transport but what I can say is that using this options certain phases of the import are running in parallel as opposed to sequentially when only one R3trans is used.
Note: This is not the same as the parallel option in SPAM/SAINT. This options does in-transport parallelization (one transport is imported with several R3trans where possible).
Just a guess, I have not tested that for SFW5.
Markus -
Active business functions for IS-OIL Downstream
Dear all,
I have system NW701/ECC6, and upgrade EhP4.
Now I want to active business functions for Downstream, in tcode swf5, I select Business functions set OIL&GAS, I found a lot of business functions:
BUSINESS_FUNCTION_BASIS_COM Business Function Basis (COM)
COMMODITY_MGMT_&_BULK_LOGISTIC Commodity Management and Bulk Logistics
COMM_MGMT&BULK_LOG_1 Commodity Management and Bulk Transports
ISR_RETAILSYSTEM Other Enhancements for SAP Retail
LOG_COMMODITY_TRANSPORT_MGMT_4 Commodity Management and Bulk Transports 2
OIL_PRODUCTION Upstream Production Management
OIL_REVENUE_ACCOUNTING Upstream Revenue Accounting
REMOTE_LOGISTICS_MANAGEMENT Remote Logistics Management
Can any one help me, what business functions do I need to active for Downstream ?
Thanks all,
Thanh.I create customer message ask SAP and these are downstream functions need to active:
1. COMMODITY_MGMT_&_BULK_LOGISTIC (ECC 6.0 )
2. BUSINESS_FUNCTION_BASIS_COM (EhP3)
3. COMM_MGMT&BULK_LOG_1 (EhP3)
4. LOG_COMMODITY_TRANSPORT_MGMT_4 (EhP4)
Thanh. -
Query on Enhancement Pack Upgrade/ Installation-Business Functions install
I am working on an Enhancement Pack Upgrade. I have the following questions from the Client, can you please help answer u2013
Scenario u2013 Upgrade from ECC 6.0 to ECC 6.0 EhP4
1 Using Business Function Prediction service, assume SAP recommends 10 Business functions to be installed. We install the 10 business functions and after 6 months the client realizes that there are some more functions which will help business.
a.What does it take to install the additional business functions.
b.Do we have to do the entire EhP4 Upgrade again
c.If we have to do the entire EhP4 Upgrade again what happens to the initially installed business functions, will that be overwritten
d.What will be the additional SPDD and SPAU effort to activate the additional business functions, will that be same as the initial SPDD/ SPAU effort.
2 Can we install all the Business functions available in EhP4. What happens if we install all the business functions. What will be the additional effort or overhead in terms of hardware, database, ABAP effortu2026..?
Thanks in advance.Hi,
1. For installing additional business functions you need to again run the whole EHPI process. But what I feel is even you install more than 1 business function you will be able to activate only 1 business function per system.
2. The initially installed business functions would not go anywhere. You need to select them in your solman before the stack.xml file generation.
3. SPAU/SPDD effforts depends on your system. So no comments.
4. If you plan to install all business functions then you will need good amount of DB space and your upgrade downtime would be high.
Regards,
Nirmal.K -
FIN_LOC_CI_24-Missing Enterprise business function - China localization
Dear All,
We are activating the FICO business functions but not able to find the FIN_LOC_CI_24- FI, Localization for China 2
an ERP EHP7 localized for China. The installation guide asks to activate the enterprise business function FIN_LOC_CI_24 trough SFW5 but the business function is missing.
Does anybody know how to solve this? Could you please help us to proceed further
Thanks
SuneethaHi,
If you are using "Quick Guide to Implementing the SAP" to install BP,
you shoud complete step 2.1.3 Required SAP Components before you active your BP.
Especially, compelte the following steps.This is the main reason of your missing business functions.
3) Financials and SAP Enterprise Extension Financials 100 (EA-FI 100)
This add package include the business function FIN_LOC_CI_24.
Please check the installation note 1686011.
Regards! -
Switching on HCM business functions with EHP4
Hello
We have installed EHP4. When trying to activate business functions for talent management using the img, we get a message "no activation necessary".
Does anyone know why this is so and how it can be fixed
ThanksThanks Sergio. Can you tell me where the planned column should be located? Is this the same as planned status?
When I open this configuration task, I have a planned status but no planned column.
I have the following
Business Function Set is blank
Under Enterprise Extensions, business function EA-HR is activated and release is showing 600
Under enterprise business functions, the function I am trying to switch on is HCM_TMC_CI_1 (it shows release 604).
The columns I see are: Name; Description; Planned status; Dependencies; Documentation; Release info; Release; SAP Test Catalog; Test Catalog and Activated On
Is it possible that the basis team did not install ehp4 properly?
When I look at system status in the test system it shows the followign for basis and hr
basis 701
ea-hr 604
thanks -
Business Function for Business Context
Dear All,
I have a technical question regarding business function FIN_SSC_AIC_1.
This Business Function is activated on the ERP side, my doubt is if this business function is not activated can we use business context on the service request to add a FI document from the ERP?
Many Thanks and Best Regards,
João GraçaYou should decide the flow in your action class only based on the configuration parameters of struts-config.xml
-
Hi,
Our client is using ECC6.0 version, we have accidentally activated SAP IS OIL &GAS, where previously it used to be SAP retail. Due to this if we execute any transaction it is going to dump with an error that DDIC data inconsistce. Can you please advise me how to deactive these business function and change SAP IS OIL & GAS to SAP retails as business function set.
I really appreciate your prompt response.
Thanks,Hi,
Once you have activated SAP IS OIL &GAS. You cannot deactivate yourself. Billing starts from the date of activating. You need to put up OSS to SAP. Only the solution you have to contact the SAP AG and deactivate it.
Regards,
Srinivas Muthyala -
Business Functions of type Validation/Constraint not used when defined in the Glossary
Hi,
the problem is the following: in the Glossary, we have some Business Rules defined. They are of type Validation or Constraint and shall be used to validate the data in the system. These Business Rules are used in Domains in a CDM model.
From that CDM model we are generating a PDM model (for HANA, but it's not working for any of the databases available for selection). Now: I would expect, as this has been defined in the CDM, the Business Rules replicated in the PDM model and used as constraints.
This is unfortunately working only for Business Functions, which are directly defined in the CDM model, not for those ones, defined in the Glossary and reused in the CDM model.
Working case:
- define Business Rule in CDM
- define Domain in CDM and assign Business Rule
- assign the domain to a attribute
- generate PDM from the CDM model
- the Business Rule is replicated in the PDM model, the check constraint for the table is generated correctly
NOT working case:
- define Business Rule in Glossary
- define Domain in CDM and assign the Business Rule from the Glossary
- assign the domain to a attribute
- generate PDM from the CDM model
- the Business Rule is NOT replicated in the PDM model, the check constraint for the table is MISSING
Do you think it's a bug, or am I doing something wrong?
P.S.
We are on 16.5 SP05
Thanks,
RafalLooks like a bug to me; I would expect the source of the rule to be irrelevant, assuming the PDM has access to the relevant metadata at the time of generation. Perhaps Glossary shortcuts don't have access to all the metadata?
-
Using an own function in a select how can i set that the function run once?
Hi
Using an own function in a select how can i set that the function run once, not in every row?
Please help me
Thanks
ViktorSomething like this ?
SQL> select * from dept;
DEPTNO DNAME LOC
10 ACCOUNTING NEW YORK
20 RESEARCH DALLAS
30 SALES CHICAGO
40 OPERATIONS BOSTON
SQL> create or replace function ret_name (deptnum in number) return varchar2
2 is
3 name varchar2(50);
4 begin
5 select dname into name
6 from dept
7 where deptno=deptnum;
8 return name;
9 exception
10 when no_data_found then
11 return('Not existent deptno');
12* end;
SQL> /
Function created.
SQL> select deptno, decode(rownum,1,ret_name(deptno),null) dname from dept;
DEPTNO DNAME
10 ACCOUNTING
20
30
40
SQL> -
Using Photoshop CS6 and after printing approx. 10 cards on an Epson R3000 printer the program gives me a dialog box saying "There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents." Even after closing and reopening the program, the print command is greyed out so I cannot select any printer. This also happens with a Brother laser printer. Both printers will produce a test page out side of the Adobe product. Help!
I cannot get any help either. I get the message "There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents." I have reinstalled all drivers, powered off/on all printers (2 of them - a Brother HL - 4040cn and an Epson Stylus Pro 7890 - which all worked fine until this morning). There appears to be no path to a solution. I have read all the forums and tried about 20 different suggestions all to no avail. Reboots, changing cables, reinstalling printers and drivers and Photoshop CS6 - ALL TO NO AVAIL. On a macbook pro retina with 10.10.3. This issue is out there and some get solutions - but not all - that's my crowd...the not all crowd. I have yet to be able to print from CS6 any more. This is a show stopper and my patience is wearing thin. And I'm tired of stupid questions like "is your printer powered on?" give me a break. This appears to be an adobe photoshop cs6 problem - as I can print from every other application. Anyone have any ideas? Adobe should have something?... Adobe system info below:
Adobe Photoshop Version: 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00) x64
Operating System: Mac OS 10.10.3
System architecture: Intel CPU Family:6, Model:58, Stepping:9 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 4
Logical processor count: 8
Processor speed: 2300 MHz
Built-in memory: 8192 MB
Free memory: 4665 MB
Memory available to Photoshop: 7059 MB
Memory used by Photoshop: 70 %
Image tile size: 1024K
Image cache levels: 4
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Allow Old GPUs: Not Detected.
OpenGL Version: 2.1 NVIDIA-10.2.7 310.41.25f01
OpenCL Version:
Video Card Vendor: NVIDIA Corporation
Video Card Renderer: NVIDIA GeForce GT 650M OpenGL Engine
Display: 2
Display Depth:= 32
Display Bounds:= top: 1072, left: 140, bottom: 1950, right: 1580
Video Renderer ID: 16918311
Video Card Memory: 1024 MB
Video Rect Texture Size: 16384
OpenGL Version: 2.1 NVIDIA-10.2.7 310.41.25f01
OpenCL Version: 1.2 (Feb 27 2015 01:29:10)
Video Card Vendor: NVIDIA Corporation
Video Card Renderer: NVIDIA GeForce GT 650M OpenGL Engine
Display: 1
Main Display
Display Depth:= 32
Display Bounds:= top: 0, left: 0, bottom: 1050, right: 1680
Video Renderer ID: 16918311
Video Card Memory: 1024 MB
Video Rect Texture Size: 16384
Serial number: 92629107631240972642
Application folder: KerrysHD:Applications:Adobe Photoshop CS6:
Photoshop scratch has async I/O enabled
Scratch volume(s):
KerrysHD, 232.6G, 19.7G free
Required Plug-ins folder: KerrysHD:Applications:Adobe Photoshop CS6:Adobe Photoshop CS6.app:Contents:Required:
Primary Plug-ins folder: KerrysHD:Applications:Adobe Photoshop CS6:Plug-ins:
Additional Plug-ins folder: not set
Installed components:
adbeape.framework adbeape 3.3.8.19346 66.1025012
AdbeScriptUIFlex.framework AdbeScriptUIFlex 6.2.29.18602 66.490082
adobe_caps.framework adobe_caps 6.0.29.0 1.276181
AdobeACE.framework AdobeACE 2.19.18.19243 66.492997
AdobeAGM.framework AdobeAGM 4.26.17.19243 66.492997
AdobeAXE8SharedExpat.framework AdobeAXE8SharedExpat 3.7.101.18636 66.26830
AdobeAXEDOMCore.framework AdobeAXEDOMCore 3.7.101.18636 66.26830
AdobeBIB.framework AdobeBIB 1.2.02.19243 66.492997
AdobeBIBUtils.framework AdobeBIBUtils 1.1.01 66.492997
AdobeCoolType.framework AdobeCoolType 5.10.31.19243 66.492997
AdobeCrashReporter.framework.framework AdobeCrashReporter 6.0.20120201
AdobeExtendScript.framework AdobeExtendScript 4.2.12.18602 66.490082
AdobeJP2K.framework AdobeJP2K 2.0.0.18562 66.236923
AdobeLinguistic.framework 17206
AdobeMPS.framework AdobeMPS 5.8.0.19463 66.495174
AdobeOwl.framework AdobeOwl 4.0.93 66.496052
AdobePDFL.framework AdobePDFL 10.0.1.18562 66.419471
AdobePDFSettings.framework AdobePDFSettings 1.4
AdobePIP.framework AdobePIP 6.0.0.1654
AdobeScCore.framework AdobeScCore 4.2.12.18602 66.490082
AdobeUpdater.framework AdobeUpdater 6.0.0.1452 "52.338651"
AdobeXMP.framework AdobeXMPCore 66.145661 66.145661
AdobeXMPFiles.framework AdobeXMPFiles 66.145661 66.145661
AdobeXMPScript.framework AdobeXMPScript 66.145661 66.145661
ahclient.framework ahclient 1.7.0.56
aif_core.framework AdobeAIF 3.0.00 62.490293
aif_ocl.framework AdobeAIF 3.0.00 62.490293
aif_ogl.framework AdobeAIF 3.0.00 62.490293
AlignmentLib.framework xcode 1.0.0.1
amtlib.framework amtlib 6.0.0.75
boost_date_time.framework boost_date_time 6.0.0.0
boost_signals.framework boost_signals 6.0.0.0
boost_system.framework boost_system 6.0.0.0
boost_threads.framework boost_threads 6.0.0.0
Cg.framework NVIDIA Cg
CIT.framework CIT 2.0.5.19287 145486
data_flow.framework AdobeAIF 3.0.00 62.490293
dvaaudiodevice.framework dvaaudiodevice 6.0.0.0
dvacore.framework dvacore 6.0.0.0
dvamarshal.framework dvamarshal 6.0.0.0
dvamediatypes.framework dvamediatypes 6.0.0.0
dvaplayer.framework dvaplayer 6.0.0.0
dvatransport.framework dvatransport 6.0.0.0
dvaunittesting.framework dvaunittesting 6.0.0.0
dynamiclink.framework dynamiclink 6.0.0.0
FileInfo.framework FileInfo 66.145433 66.145433
filter_graph.framework AdobeAIF 3.0.00 62.490293
hydra_filters.framework AdobeAIF 3.0.00 62.490293
ICUConverter.framework ICUConverter 3.61 "gtlib_3.0" "." "16615"
ICUData.framework ICUData 3.61 "gtlib_3.0" "." "16615"
image_compiler.framework AdobeAIF 3.0.00 62.490293
image_flow.framework AdobeAIF 3.0.00 62.490293
image_runtime.framework AdobeAIF 3.0.00 62.490293
LogSession.framework LogSession 2.1.2.1652
mediacoreif.framework mediacoreif 6.0.0.0
PlugPlug.framework PlugPlug 3.0.0.383
UpdaterNotifications.framework UpdaterNotifications 6.0.0.24 "6.0.0.24"
wrservices.framework
Optional and third party plug-ins: NONE
Plug-ins that failed to load: NONE
Flash:
Mini Bridge
Kuler
Installed TWAIN devices: NONE
Maybe you are looking for
-
Safari keeps stoping on Macbook Pro OSX 10.6.8
Hello fellow Macbook Pro user's, Safari keeps stoping on Macbook Pro running OSX 10.6.8. I'll startup the laptop and go to a few different websites, the type in, or click on a link, or bookmark to go to a differrent website, and it stops working. On
-
Hi Team, We have a requierment for File receiver to create a file with the name SA2345_date_time.txt. Could anyone please help me how to define it in receiver file adapter. Appreciate your quick response. thanks & regards, Ranganath.
-
I have a JBL Radial ipod speaker. I live remote and occasionaly have power surges. The ipod freezes on whatever screen it is on and remains on til the battery is too low for operation. JBL says they haven't heard of the problem with their unit and it
-
AQ Sort Order (priority,enq_time)
HI I am trying to subscribe to a topic with Sort Order (priority,enq_time) using oracle.jms API.Payload type is an ADT generated from jpublisher.Though the same worked with Oracle.AQ API.After publishing i am updating the priority.But the subscribing
-
Confirmed Quantity and Goods Receipt
Hi, Currently SAP does not restrict for Goods Receipt in MIGO even if I have not confirmed single quantity of Production Order. But I want to restrict the user to MIGO only Less than or equal to confirmed quantity on last operation. Is there any way